blob: 2348df63c015a577093eb5a958b87302373eb4e9 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
Wolfgang Denk27e166b2005-12-19 13:02:45 +01002Changes since U-Boot 1.1.4:
3======================================================================
4
Wolfgang Denk1264b402006-03-12 02:20:55 +01005* Avoid dereferencing NULL in find_cmd() if no valid commands were found
6 Patch by Andrew Dyer, 13 Jun 2005
7
Wolfgang Denk0afe5192006-03-12 02:10:00 +01008* Add ADI Blackfin support
9 - add support for Analog Devices Blackfin BF533 CPU
10 - add support for the ADI BF533 Stamp uClinux board
11 - add support for the ADI BF533 EZKit board
12 Patches by Richard Klingler, 11 Jun 2005
13
Wolfgang Denkdc013d42006-03-12 01:59:35 +010014* Add loads of ntohl() in image header handling
15 Patch by Steven Scholz, 10 Jun 2005
16
Wolfgang Denk8ff02082006-03-12 01:55:43 +010017* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
18 variable to set clock
19 Patch by Yuli Barcohen, 05 Jun 2005
20
Wolfgang Denkf47b6612006-03-12 01:48:55 +010021* RPXlite configuration fixes
22 - Use correct flash sector size
23 - Use correct memory test end address
24 - Add support for bzip2 compression
25 - Various small fixes
26 Patch by Yuli Barcohen, 05 Jun 2005
27
Wolfgang Denkaba9f1a2006-03-12 01:45:44 +010028* Memory configuration changes for ZPC.1900 board
29 - Fix SDRAM timing on both local bus and 60x bus
30 - Add support for second flash bank (SIMM)
31 - Change boot flash base
32 Patch by Yuli Barcohen, 05 Jun 2005
33
Wolfgang Denk5797b822006-03-12 01:43:03 +010034* Add support for Adder boards with 16MB SDRAM;
35 add support for second FEC on Adder87x board.
36 Patch by Yuli Barcohen, 05 Jun 2005
37
Wolfgang Denk7c54c702006-03-12 01:40:01 +010038* Fix conditional for including ks8695eth driver
39 Patch by Greg Ungerer, 04 Jun 2005
40
Wolfgang Denk92b197f2006-03-12 01:37:50 +010041* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
42 Patch by Friedrich Lobenstock, 02 Jun 2005
43
Wolfgang Denk82d716f2006-03-12 01:30:45 +010044* Fix comment in common/soft_i2c.c
45 Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
46
Wolfgang Denk611125a2006-03-12 01:23:43 +010047* Cleanup compiler warnings.
48 Patch by Greg Ungerer, 21 May 2005
49
Wolfgang Denk22814902006-03-12 01:21:19 +010050* Word alignment fixes for word aligned NS16550 UART
51 Patch by Jean-Paul Saman, 01 Mar 2005
52
53 Fixes bug with UART that only supports word aligned access: removed
54 "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
55 (broken!) versions of GCC generate byte accesses when encountering
56 the packed attribute regardless if the struct is already correctly
57 aligned for a platform. Peripherals that can only handle word
58 aligned access won't work properly when accessed with byte access.
59 The struct NS16550 is already word aligned for REG_SIZE = 4, so
60 there is no need to packed the struct in that case.
61
Wolfgang Denkd509b812006-03-12 01:13:30 +010062* Fix behaviour if gatewayip is not set
63 Patch by Robin Gilks, 23 Dec 2004
64
Wolfgang Denk84ef51a2006-03-12 00:04:20 +010065* Fix cleanup for netstart board.
66 Remove build results from repository
67
Wolfgang Denkd52fb7e2006-03-11 22:53:33 +010068* Some code cleanup for GCC 4.x
69
Wolfgang Denk4367a012006-03-11 19:15:27 +010070* Fixes to support environment in NAND flash;
71 enable NAND flash based environment for delta board.
72
Wolfgang Denk9c575e52006-03-07 00:33:28 +010073* Add support for Intel Monahans CPU on Zylonite and Delta boards
74 (This is Work in Progress!)
75
Wolfgang Denk1f62bc22006-03-07 00:32:07 +010076* Add support for TQM8260-AI boards.
77
Wolfgang Denkbfc81252006-03-06 13:03:37 +010078* Minor code cleanup
79
Wolfgang Denk4e3ccd22006-03-06 11:25:22 +010080* Merge the new NAND code (testing-NAND brach); see doc/README.nand
Bartlomiej Sieka038ccac2006-02-24 09:37:22 +010081 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
82 Patch by Ladislav Michl, 29 Jun 2005
83
Stefan Roesef1ee9822006-03-04 14:57:03 +010084* Add lowboot target to mcc200 board
85 Patch by Stefan Roese, 4 Mar 2006
86
Stefan Roesef18e8742006-03-01 17:00:49 +010087* Fix problem with flash_get_size() from CFI driver update
88 Patch by Stefan Roese, 1 Mar 2006
89
Wolfgang Denk4f718662006-03-02 11:03:05 +010090* Make CFG_NO_FLASH work on ARM systems
91 Patch by Markus Klotzbuecher, 27 Feb 2006
92
Wolfgang Denk82f2e332006-02-28 18:39:20 +010093* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
94 use hush shell.
95
Stefan Roese58ad4972006-02-28 15:33:28 +010096* Convert mcc200 to use common CFI flash driver
97 Patch by Stefan Roese, 28 Feb 2006
98
Stefan Roese79b4cda2006-02-28 15:29:58 +010099* Add env-variable "unlock" to handle initial state of sectors
100 (locked/unlocked).
101
102 Only the U-Boot image and it's environment is protected,
103 all other sectors are unprotected (unlocked) if flash
104 hardware protection is used (CFG_FLASH_PROTECTION) and
105 the environment variable "unlock" is set to "yes".
106
107 Patch by Stefan Roese, 28 Feb 2006
108
109* Update drivers/cfi_flash.c:
110 - find_sector() called in both versions of flash_write_cfiword()
111 Patch by Peter Pearse, 27th Feb 2006
112
113* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
114 Patch by Jose Maria Lopez, 16 Jan 2006
115
116* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
117 Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
118
119* Changes/fixes for drivers/cfi_flash.c:
120 We *should* check if there are any error bits if the previous call
121 returned ERR_OK (Otherwise we will have output an error message in
122 flash_status_check() already.) The original code would only check for
123 error bits if flash_status_check() returns ERR_TIMEOUT.
124 Patch by Marcus Hall, 23 Aug 2005
125
126* Changes/fixes for drivers/cfi_flash.c:
127 - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
128 - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
129 Patch by Sangmoon Kim, 19 Aug 2005
130
131* Fixes for drivers/cfi_flash.c:
132 - Fix wrong timeout value usage in flash_status_check()
133 - Round write_tout up when converting to msec in flash_get_size()
134 - Remove clearing flash status at the end of flash_write_cfibuffer()
135 which sets Intel 28F640J3 flash back to command mode on CSB472
136 Patch by Tolunay Orkun, 02 July 2005
137
Heiko Schocher075866d2006-02-20 17:34:12 +0100138* Add basic support for the SMMACO4 Board from PanDaCom.
139 Patch by Heiko Schocher, 20 Feb 2006
140
Wolfgang Denk881a87e2006-02-21 17:33:04 +0100141* Add GIT version information (commid ID) to untagged U-Boot versions
142
143 As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
144 of all unreleased (untagged) U-Boot images will be automatically
145 extended upon compiletime with a part of the GIT commit ID and
146 possibly with "dirty" if uncommited changes are detected.
147
148 Here an example for the resulting version:
149 "U-Boot 1.1.4-g3457ac18-dirty"
150
151 The version is now maintained in the toplevel Makefile and the
152 version headers are autogenerated.
153
154 Patch by Stefan Roese, 9 Feb 2006
155
Wolfgang Denk84e106c2006-02-07 15:18:25 +0100156* Update default environment for INKA4x00 board.
157
Stefan Roese79830d52006-02-08 15:54:15 +0100158* Convert CPCI750 to use common CFI flash driver
159 Patch by Reinhard Arlt, 8 Feb 2006
160
Stefan Roese48a05a52006-02-07 16:51:04 +0100161* Various changes to esd HH405 board specific files
162 Patch by Matthias Fuchs, 07 Feb 2006
163
Wolfgang Denk57cac1f2006-01-29 19:12:41 +0100164* Cleanup U-Boot boot messages on ARM.
165
166 To match the U-Boot user interface on ARM platforms to the U-Boot
167 standard (as on PPC platforms), some messages with debug character
168 are removed from the default U-Boot build.
169 Enable DEBUG for lib_arm/board.c to enable debug messages.
170 New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
171 Patch by Stefan Roese, 24 Jan 2006
172
Stefan Roese18c5e642006-01-18 20:06:44 +0100173* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
174 Patch by Stefan Roese, 18 Jan 2006
175
Stefan Roesea7b9fb92006-01-18 20:05:34 +0100176* Add VGA support (CT69000) to CPCI750 board.
177 Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
178 Patch by Reinhard Arlt, 30 Dec 2005
179
Stefan Roese2076d0a2006-01-18 20:03:15 +0100180* PMC405 and CPCI405: Moved configuration of pci resources
181 into config file.
182 PMC405 and CPCI2DP: Added firmware download and booting via pci.
183 Patch by Matthias Fuchs, 20 Dec 2005
184
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100185* Fix 28F256J3A support on PM520 board
186 (without bank-switching only 32 MB can be accessed)
187
Wolfgang Denk756ceb82006-01-11 13:04:53 +0100188* Fix mkimage bug with multifile images created on 64 bit systems.
189
Wolfgang Denkc4b465f2006-01-13 17:00:56 +0100190* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
Wolfgang Denkc7428d42005-12-29 15:12:09 +0100191
Wolfgang Denk27e166b2005-12-19 13:02:45 +0100192* Fix compiler problem with at91rm9200dk board.
193 Patch by Eugen Bigz, 19 Dec 2005
194
195======================================================================
Stefan Roeseb79316f2005-08-15 12:31:23 +0200196Changes for U-Boot 1.1.4:
197======================================================================
198
Stefan Roese81a31702005-12-15 09:43:12 +0100199* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
200 - Changed GPIO setup to enable another address line in order to
201 address 64M of FLASH.
202 - Added function sdram_tr1_set to auto calculate the tr1 value for
203 the DDR.
204 Patch by Steven Blakeslee, 12 Dec 2005
205
Wolfgang Denka9e642e2005-12-16 15:14:18 +0100206* MPC5200: Set PCI retry counter to 0 = infinite retry;
207 The default of 255 is too short for slow devices.
208 Patch by Martin Nykodym, 12 Dec 2005
209
Marian Balakowicz3a7b1422005-12-06 20:33:07 +0100210* Change port configuration for O2DNT (CODEC1 on PSC1).
211
Wolfgang Denk74812662005-12-12 16:06:05 +0100212* Fix register for PCI async mode on PPC440EP
213 Patch by Youngchul Bang, 08 Dec 2005
214
215* Fix U-Boot linking problems (add .eh_frame segment to linker script)
216 This segment may be required by some libgcc.a functions
217 (like _udivdi3).
218
Wolfgang Denka889bd22005-12-06 15:02:31 +0100219* Fix DPRAM offset/size for MPC8541/8555.
220 Simplify TQM85xx Makefile handling.
221
Wolfgang Denk41253be2005-12-04 11:20:57 +0100222* Fix data overflow (typo?) in rtc/ds1302.c
223
Wolfgang Denkc75eba32005-12-01 02:15:07 +0100224* Fix U-Boot compilation for MIPS boards using ELDK 4.0
225
Stefan Roesed96f41e2005-11-30 13:06:40 +0100226* Add support for TQM8541/8555 boards, TQM85xx support reworked:
227 - Support for TQM8541/8555 boards added.
228 - Complete rework of TQM8540/8560 support.
229 - Common TQM85xx code now supports all current TQM85xx platforms
230 (TQM8540/8541/8555/8560).
231 - DDR SDRAM size detection added.
232 - CAS latency default values can be overwritten by setting "serial#"
233 to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
234 If problems are detected with this non default CAS latency,
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100235 the default values will be used instead.
236 - Flash size detection added.
Stefan Roesed96f41e2005-11-30 13:06:40 +0100237 - Moved FCC ethernet driver initialization behind TSEC driver init
238 -> TSEC is first device.
239 Patch by Stefan Roese, 30 Nov 2005
240
Stefan Roese6e7fb6e2005-11-29 18:18:21 +0100241* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
242 Patch by John Otken, 23 Nov 2005
243
Stefan Roese3d9569b2005-11-27 19:36:26 +0100244* Changed PPC44x startup message (cpu info, speed...) to common style:
245 On PPC44x platforms, the startup message generated in "cpu.c" only
Wolfgang Denk4a86d772005-12-01 01:38:13 +0100246 comprised the ppc type and revision but not additional information
Stefan Roese3d9569b2005-11-27 19:36:26 +0100247 like speed etc. Those speed infos where printed in the board specific
248 code. This new implementation now prints all CPU infos in the common
249 cpu specific code. No board specific code is needed anymore and
250 therefore removed from all current 44x implementations.
251 Patch by Stefan Roese, 27 Nov 2005
252
Wolfgang Denkb6f84352005-12-01 01:17:24 +0100253* Adjust TQM834x PHY addresses for latest hardware revision.
254
Wolfgang Denkd00de232005-12-01 00:55:19 +0100255* Increase malloc arena on TQM5200 board to 256 kB.
256 With 64 kb uniform flash sector size the old value of 128 kB was
257 too small.
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100258
Wolfgang Denkd00de232005-12-01 00:55:19 +0100259* Fix miiphy global data initialization (problem on 4xx boards when
260 no ethaddr is assigned). Initialization moved from
261 miiphy_register() to eth_initialize().
Marian Balakowiczd9785c12005-11-30 18:06:04 +0100262
263 Based on initial patch for 4xx platform by Matthias Fuchs.
264
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100265* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
266
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100267* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
268 The COPYING file was extended to make clear that these files can be
269 used in non-GPL code, too.
Wolfgang Denkf08abe32005-11-25 16:38:03 +0100270 Also, a corresponding note was placed in the headers of the affected files.
Wolfgang Denkaa7cfc42005-11-25 10:38:43 +0100271
Stefan Roese5568e612005-11-22 13:20:42 +0100272* Add support for Prodrive P3P440 board:
273 - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
274 - CFG_FLASH_QUIET_TEST added to use the common CFI driver
275 for bank autodetection
276 Patch by Stefan Roese, 22 Nov 2005
277
Wolfgang Denkfe126d82005-11-20 21:40:11 +0100278* Change all '$(...)' variable references into '${...}'
279 which makes the environment compatible with the hush shell.
280 WARNING: Support for the old '$(...)' syntax will be
281 discontinued in a later version.
282
Rafal Jaworowski5a164c82005-11-17 00:26:18 +0100283* Minor changes to init flags in TQM834x PCI.
284
Stefan Roese3ca37762005-11-15 16:26:34 +0100285* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
286 Patch by Stefan Roese, 15 Nov 2005
287
Stefan Roesefeaedfc2005-11-15 10:35:59 +0100288* New PPC 405EP board added: CMS700
289 Added CONFIG_NET_MULTI for VOM405 board.
290 Added reset_phy() for VOM405 board.
291 Patch by Matthias Fuchs, 09 Nov 2005
292
Stefan Roeseea339202005-11-08 09:00:09 +0100293* Updated PCI mapping for esd CPCI2DP board.
294 Add support for error LED.
295 Patch by Matthias Fuchs, 07 Nov 2005
296
Stefan Roese527b5a52005-11-07 13:43:06 +0100297* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
298 Patch by Stefan Roese, 07 Nov 2005
299
Stefan Roese182e1062005-11-07 09:57:57 +0100300* Correct PPC Timebase register definitions (SPRN_TBRL...)
301 Patch by Stefan Roese, 07 Nov 2005
302
Stefan Roesef190c112005-11-05 15:50:16 +0100303* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
304 Patch by Stefan Roese, 05 Nov 2005
305
Stefan Roeseef04a0a2005-11-03 08:31:33 +0100306* Additional fix for external IRQ config on Yellowstone & Yosemite
307 Patch by Stefan Roese, 03 Nov 2005
308
Stefan Roese57275b62005-11-01 10:08:03 +0100309* Add support for Ocotea pass 3 with 440GX Rev. F
310 Patch by Stefan Roese, 01 Nov 2005
311
Stefan Roesee1902902005-10-28 12:21:06 +0200312* Fix external IRQ configuration on Yellowstone & Yosemite
313 Patch by Stefan Roese, 28 Oct 2005
314
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200315* Add support for multiple PHYs.
Wolfgang Denkbe360d92005-10-29 23:50:20 +0200316 Tested on the following boards:
317 cmcpu2 (at91rm9200/ether.c)
318 PPChameleon (ppc4xx/4xx_enet.c)
319 yukon (mpc8220/fec.c)
320 uc100 (mpc8xx/fec.c)
321 tqm834x (mpc834x/tsec.c) with EEPRO100
322 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
323 Main changes include:
324 common/miiphyutil.c
325 - miiphy_register routine was added to allow multiple PHYs to be registered
326 - miiphy_read and miiphy_write are now defined in this file, and
327 require additional argument (char *devname)
328 - other miiphy_* routines also require additional device name argument
329 ../lib_i386/board.c
330 ../lib_ppc/board.c
331 Calling reset_phy() was moved to be executed *after* eth_initialize().
332 This is necessary as now some of the implementations of reset_phy()
333 may need to use miiphy_reset() which is not allowed before eth_initialize()
334 as eth_initialize registers all required miiphy_* routines.
335 Tested on IP860 and PHY initializes properly after this change.
Marian Balakowicz99eb35d2005-10-29 14:48:59 +0200336
337* Correct includes for flat tree builder.
338
339* Fix conflicting types (flash_write()) in trab auto_update.c.
340
Rafal Jaworowski6902df52005-10-17 02:39:53 +0200341* Add PCI support for the TQM834x board.
342
Stefan Roesee9f11102005-10-20 16:40:17 +0200343* Add missing 4xx board to MAKEALL
344 Patch by Stefan Roese, 20 Oct 2005
345
Stefan Roesea5477752005-10-20 16:39:16 +0200346* Fix conflicting types (flash_write()) in esd auto_update.c
347 Patch by Stefan Roese, 20 Oct 2005
348
Stefan Roesec4c13df2005-10-20 16:36:44 +0200349* Fix problem with sleep in NetConsole (use get_timer())
350 Patch by Stefan Roese, 20 Oct 2005
351
Stefan Roese1e25f952005-10-20 16:34:28 +0200352* Add NetConsole Support for AMCC eval boards
353 Patch by Stefan Roese, 20 Oct 2005
354
Stefan Roesea93316c2005-10-18 19:17:12 +0200355* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
356 Patch by Stefan Roese, 18 Oct 2005
357
Stefan Roese3b6748e2005-10-14 15:37:34 +0200358* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Wolfgang Denk326bf402005-10-17 00:24:00 +0200359 Fix identation on ext2ls help entry.
Stefan Roese3b6748e2005-10-14 15:37:34 +0200360 Patch by Stefan Roese, 14 Oct 2005
361
Wolfgang Denk20a374f2005-10-15 18:43:50 +0200362* Add support for TQM834x boards.
363 Cleanup.
364
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200365* Cleanup for GCC-4.x
366
Wolfgang Denk17a8b272005-10-13 10:41:25 +0200367* Add documentation for Open Firmware Flat Tree and usage.
368 Patch by Pantelis Antoniou, 13 Oct 2005
369
Wolfgang Denk814d98f2005-10-13 01:59:29 +0200370* Add missing files for Pantelis Antoniou's patch
371 Patch by Pantelis Antoniou, 04 Sep 2005
372
Stefan Roese4f92ac32005-10-10 17:43:58 +0200373* Fix problem in ppc4xx eth-driver without ethaddr (only without
374 CONFIG_NET_MULTI set)
375 Patch by Stefan Roese, 10 Oct 2005
376
Stefan Roesec29ab9d2005-10-08 10:19:07 +0200377* Fix gzip bmp support (test if malloc fails, warning when truncated).
378 Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
379 Patch by Stefan Roese, 07 Oct 2005
380
Wolfgang Denk070610c2005-10-13 01:49:09 +0200381* Add support for OF flat tree for the STXtc board.
382 Patch by Pantelis Antoniou, 04 Sep 2005
383
Wolfgang Denkf57f70a2005-10-13 01:45:54 +0200384* Support passing of OF flat trees to the kernel.
385 Patch by Pantelis Antoniou, 04 Sep 2005
386
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200387* Cleanup
388
389* Add support for NetSilicon NS7520 processor.
390 Patch by Art Shipkowski, 12 May 2005
391
Wolfgang Denk7521af12005-10-09 01:04:33 +0200392* Add support for AP1000 board.
393 Patch by James MacAulay, 07 Oct 2005
394
Wolfgang Denk95f9dda2005-10-09 00:33:37 +0200395* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
396 Patch by Anders Larsen, 07 Oct 2005
397
398 The Atmel errata #11 states that the transfer buffer descriptor
399 table must be aligned on a 16-word boundary. As it turned out, this
400 is insufficient - it seems the table must be aligned on a boundary
401 at least as large as the table itself (in Linux this is not an
402 issue - the table is aligned on a PAGE_SIZE (4096) boundary).
403
Wolfgang Denk47340a42005-10-09 00:25:58 +0200404* Fixed compilation for ARM when using a (standard) hard-FP toolchain
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200405 Patch by Anders Larsen, 07 Oct 2005
Wolfgang Denk47340a42005-10-09 00:25:58 +0200406
Wolfgang Denk96782c62005-10-09 00:22:48 +0200407* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
408 sed the linker scripts, rather than pre-process them.
409 Patch by Peter Pearse, 07 Oct 2005
410
Wolfgang Denk87cb6862005-10-06 17:08:18 +0200411* Update make target for ARM supported boards.
412 Use lowlevel_init() instead of platformsetup() [rename].
413 Patch by Peter Pearse, 06 Oct 2005
414
Wolfgang Denkbccae902005-10-06 01:50:50 +0200415* Fix booting from serial dataflash on AT91RM9200
416 Patch by Peter Menzebach, 29 Aug 2005
417
Wolfgang Denk6ebc7922005-10-06 01:46:57 +0200418* Add JFFS2 support for TRAB board
419 Patch by Martin Krause, 25 Aug 2005
420
Wolfgang Denk5ae31ee2005-10-06 01:43:39 +0200421* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
422 Patch by Marcus Hall, 24 Aug 2005
423
Wolfgang Denkf5c254d2005-10-06 01:26:16 +0200424* Fix the machine-id of the Cogent csb637 board
425 Patch by Anders Larsen, 05 Oct 2005
426
Wolfgang Denk78da6072005-10-06 01:22:22 +0200427* Complete support for the KwikByte KB920x boards
428 Patch by Anders Larsen, 05 Oct 2005
429
Wolfgang Denkc0e82d52005-10-05 02:06:08 +0200430* Set the AT91RM9200 clock to asynchronous mode
431 Patch by Anders Larsen, 03 May 2005
432
Wolfgang Denk3b9dfdd2005-10-05 02:02:25 +0200433* Set the AT91RM9200 clock to synchronous mode
434 Patch by Anders Larsen, 29 Apr 2005
435
Wolfgang Denk645da512005-10-05 02:00:09 +0200436* Add support for Cogent csb637
437 Patch by Anders Larsen, 29 Apr 2005
438
Wolfgang Denkfef636b2005-10-05 01:54:04 +0200439* Fix dm9161.c initialization
440 Patch by Anders Larsen, 29 Apr 2005
441
Wolfgang Denk080bdb72005-10-05 01:51:29 +0200442* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
443 (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
444
445* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
446 Patch by Anders Larsen, 29 Apr 2005
447
Wolfgang Denk29ca46c2005-10-05 00:25:17 +0200448* Fix device partition intialization for SystemACE disks.
449 Patch by Stephen Williams, 28 Apr 2005
450
Wolfgang Denk99b0d282005-10-05 00:19:34 +0200451* Added support for KwikByte KB920x boards (based on AT91RM9200)
452 Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
453
Wolfgang Denk45237bc2005-10-05 00:03:55 +0200454* Add support for S29GL064M-R3 flash chip on xsengine board
455 Patch by Kurt Stremerch, 18 Apr 2005
456
Wolfgang Denk7d314992005-10-05 00:00:54 +0200457* E500 update: repoint IVPR to RAM when code is relocated
458 Patch by Kylo Ginsberg, 13 Apr 2005
459
Wolfgang Denke5e98ed2005-10-04 23:38:07 +0200460* Fix loop end test in lib_generic/string.c:strswab()
461 Patch by Andrew Dyer, October 10, 2005
462 Signed-off-by: Andrew Dyer <amdyer@gmail.com>
463
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200464* Cleanup
465
466* Update ARM Integrator boards:
467 Correct addessing errors in platform files.
468 Split off common core module data from Integrator header files to
469 include/armcoremodule.h.
470 Patch by Peter Pearse, 04 Oct 2005
471
Wolfgang Denk1820d4c2005-10-04 22:38:24 +0200472* Make sure only supported compiler options are used
473 Import "cc-option" shell function from kernel and
474 use it to get the correct ARM GCC options for individual CPUs
475 Patch by Peter Pearse, 30 Jun 2005
476
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200477* Fix 440GR to print correct cpu revision
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200478 Patch by Stefan Roese, 04 Oct 2005
Stefan Roese9a8d82f2005-10-04 15:00:30 +0200479
Stefan Roese93b17ec2005-10-03 15:27:50 +0200480* Change board message on AMCC Yosemite & Yellowstone to common style
Wolfgang Denk9b880bd2005-10-04 23:10:28 +0200481 Patch by Stefan Roese, 03 Oct 2005
Stefan Roese93b17ec2005-10-03 15:27:50 +0200482
Wolfgang Denkd9631ec2005-09-30 15:18:23 +0200483* Fix compiler warning
484
Wolfgang Denk709d8ec2005-09-29 12:16:38 +0200485* Fix FEC PHY addresses for TQM85xx boards
486
Wolfgang Denke98f68b2005-09-28 01:49:47 +0200487* Fix uninitialized variable problem in hush shell
488 Patch by Lars Rostock, 26 Sep 2005
489
Wolfgang Denkfb34a9a2005-09-26 23:40:37 +0200490* Undo change of f6e20fc6ca... to include/configs/trab.h
491 (Must have been an accident?)
492
Wolfgang Denkd8e7e0f2005-09-26 01:26:56 +0200493* Add support for AT91RM9200 OHCI Controller.
494 Patch by Eric Benard, 07 Apr 2005
495
Wolfgang Denk98404642005-09-26 01:18:22 +0200496* Update ARM mach-types.h
497 Patch by Eric Benard, 07 Apr 2005
498
Wolfgang Denk0e4018d2005-09-26 01:14:38 +0200499* Add support for MP2USB board.
500 Patch by Eric Benard, 07 Apr 2005
501
Wolfgang Denkc570b2f2005-09-26 01:06:33 +0200502* Add board support for armadillo HT1070
503 Patch by Rowel Atienza, 06 Apr 2005
504
Wolfgang Denkc2d0ab42005-09-26 00:53:02 +0200505* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
506 Patch by Vitaly Bordug, 30 Mar 2005
507
Wolfgang Denke6f22282005-09-26 00:44:15 +0200508* Add iopset command on mpc8xx
509 Patch by Daniel Eisenhut, 25 Mar 2005
510
Wolfgang Denka9127332005-09-26 00:39:59 +0200511* Add support for MII in eepro100 driver.
512 Patch by Gleb Natapov, 21 Mar 2005
513
Wolfgang Denkf2af3eb2005-09-26 00:29:53 +0200514* Fixes to the Lubbock (PXA 25x) support:
515 - Resolve the FIXME with respect to saving the u-boot environment.
516 - Make the default load address land in real memory.
517 - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
518 Patch by David Brownell, 10 Mar 2005
519
Wolfgang Denk8e6f1a82005-09-25 18:59:36 +0200520* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
521 Patch by Marc Leeman, 04 Mar 2005
522
Wolfgang Denk49a75812005-09-25 18:41:04 +0200523* OMAP242x H4 board update
524 - fix for ES2 differences.
525 - switch to using the cfi_flash driver.
526 - fix SRAM build address.
527 - fix for GP device operation.
528 - unlock SRAM for GP devices.
529 - display more device information.
530 - fix potential deadlock in omap24xx_i2c driver.
531 - fix DLL load values to match dpllout*1 operation.
532 - fix 2nd chip select init for combo DDR device.
533 - add support for CFI Intel 28F256L18 on H4 board.
534 Patch by Richard Woodruff, 03 Mar 2005
535
Wolfgang Denk8e2be512005-09-25 17:14:20 +0200536* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
537 Patch by Steven Scholz, 02 Mar 2005
538
Wolfgang Denka188b582005-09-25 17:05:57 +0200539* Fix typo in eth.c
540 Patch by Ara Avanesyan, 24 Feb 2005
541
Wolfgang Denk31466292005-09-25 17:02:27 +0200542* Remove unneeded #include <malloc.h>
543 Patch by Ladislav Michl, 22 Feb 2005
544
Wolfgang Denkb66eb522005-09-25 16:59:36 +0200545* Add cramfs support for m68k
546 Patch by Zachary Landau, 21 Feb 2005
547
Wolfgang Denkbd516262005-09-25 16:56:15 +0200548* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
Wolfgang Denk716c1dc2005-09-25 18:49:35 +0200549 Patch by Jeff Angielski, 21 Feb 2005
550
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200551* Fix au1x00_serial baud rate calculation:
552 remove hardcoded cpu clock divisor and use register instead;
553 round up instead of truncate
554 Patch by Andrew Dyer, 15 Feb 2005
555
Wolfgang Denk875c7892005-09-25 16:44:21 +0200556* Add Xilinx Spartan3 family FPGA support
Wolfgang Denk7a22cd52005-09-25 16:50:33 +0200557 Patch by Kurt Stremerch, 14 Feb 2005
Wolfgang Denk875c7892005-09-25 16:44:21 +0200558
Wolfgang Denkdb421e62005-09-25 16:41:22 +0200559* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
560 Patch by Zachary Landau, 11 Feb 2005
561
Wolfgang Denkc177bb52005-09-25 16:31:16 +0200562* Fix VOH405 Support
563 Patch by Matthias Fuchs, 25 Sep 2005
564
Wolfgang Denk1972dc02005-09-25 16:27:55 +0200565* Added support for PCI bridge on MPC8272ADS
566 Patch by Vitaly Bordug, Feb 09 2005
567
Wolfgang Denk0148e8c2005-09-25 16:22:14 +0200568* Update multicore CM9XX support for Integrator AP to allow booting from flash
569 Patch by Jean-Paul Saman, 8 Feb 2005
570
Wolfgang Denk389db1f2005-09-25 16:15:17 +0200571* Fix strswab() to reliably find end of string
572 Patch by Andrew Dyer, 08 Feb 2005
573
Wolfgang Denk6ed6ce62005-09-25 16:01:42 +0200574* Fix typos in include/ppc440.h
575 Patch by Andrew E Mileski, 04 Feb 2005
576
Wolfgang Denk2df741b2005-09-25 15:57:49 +0200577* Add Vibren (was Accelent) PXA255 IDP Support
578 Patch by Cliff Brake, 04 Feb 2005
579
Wolfgang Denkfd4bb672005-09-25 15:39:00 +0200580* Fix tools/bmp_logo.c using incorrect offset to pixel data
581 Patch by Andrew Dyer, 31 Jan 2005
582
Wolfgang Denk74f43042005-09-25 01:48:28 +0200583* Add ARM946E cpu and core module targets; remap memory to 0x00000000
584 Patch by Peter Pearse, 2 Feb 2005
585
Wolfgang Denke2146b62005-09-25 01:20:38 +0200586* Fix error handling in tools/env/fw_env.c
587 Patch by Ara Avanesyan, 01 Feb 2005
588
Wolfgang Denk9f221d02005-09-25 01:09:58 +0200589* Fix MGT5100 PSC baudrate calculation
590 Patch by Sebastian Schau, 27 Jan 2005
591
Wolfgang Denkc97a2aa2005-09-25 00:59:24 +0200592* OMAP242x fix for GP device booting
593 - Add SRAM unlock for GP devices.
594 - Change DDR DLL unlock value to allow DPLLout*1 operation.
595 Patches by Richard Woodruff, 21 Jan 2005:
596
Wolfgang Denk265817c2005-09-25 00:53:22 +0200597* Add support for AMD's Pb1x00 eval board;
598 add MII routines to the au1x00 ethernet driver;
599 add USB ohci driver (work in progress)
600 Patch by Thomas Sailer, 20 Jan 2005
601
Wolfgang Denkb63de2c2005-09-25 00:23:05 +0200602* Update omap5912osk board
603 Use drivers/cfi_flash.c instead of private flash driver;
604 Remove hardcoded personalized settings from omap5912osk.h;
605 Fix spacing with (RO) marks in 'flinfo' output.
606 Patch by Michael Bendzick, 14 Jan 2005
607
Wolfgang Denk3706ba12005-09-25 00:00:45 +0200608* Fix warnings for PCI code on ixp
609 Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
610
Wolfgang Denk9a9200b2005-09-24 23:41:00 +0200611* virtex2 fix for bogus download error messages
612 The virtex2 FPGA download code watches for init going active during
613 a download of config data as an error condition. init also goes
614 active after a configuration is finished in concert with the done
615 signal. So far, the code does not check for done active until all
616 of the configuration data is sent. If configuration data has a few
617 extra pad bytes at the end, this would cause an error message even
618 though the download had suceeded.
619 NOTE: virtex2 slave serial and spartan2 versions may still have the
620 same problem.
621 Patch by Andrew Dyer, 12 Jan 2005
622
Wolfgang Denkdafbe372005-09-24 23:32:48 +0200623* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
624 Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
625 message when probing for nonexistent flash in little endian mode.
626 As a side effect more efficient and smaller code is generated,
627 which is always a Good Thing (TM).
628 Patch by Ladislav Michl, 24 Sep 2005
629
Wolfgang Denk28cb9372005-09-24 23:25:46 +0200630* Update for TFTP using a fixed UDP port
631 Use the approved environment variable names. Added "tftpdstp" to
632 allow ports other than 69 per Tolunay Orkun's recommendation.
633 Patch by Jerry Van Baren, 12 Jan 2005
634
Wolfgang Denkecb0ccd2005-09-24 22:37:32 +0200635* Allow to force TFTP to use a fixed UDP port
636 (Add a configuration option CONFIG_TFTP_PORT and optional env
637 variable tftpport)
638 Patch by Jerry Van Baren, 10 Jan 2005
639
Wolfgang Denk4bc12f12005-09-24 22:05:40 +0200640* Fix ethernet timeouts on dbau1550 and other au1x00 systems
641 Patch by Leif Lindholm, 29 Dec 2004
642
Wolfgang Denk2b792af2005-09-24 21:54:50 +0200643* Cleanup: fix broken builds
644
645* Fix PHY address argument passing with mii info command
646 Patch by Andrew Dyer, 28 Dec 2004
647
Wolfgang Denk0c8721a2005-09-23 11:05:55 +0200648* Cleanup (PPC4xx is AMCC now)
649
Stefan Roese7644f162005-09-22 09:16:57 +0200650* esd CPCI2DP board added
651 Patch by Matthias Fuchs, 22 Sep 2005
652
Stefan Roese026cb5d2005-09-22 09:07:15 +0200653* esd PMC405 board updated
654 Patch by Matthias Fuchs, 22 Sep 2005
655
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200656* Add SM501 support to HH405 board.
657 Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
658 Add support for eeprom write-enable (CFG_EEPROM_WREN).
659 Patch by Stefan Roese, 22 Sep 2005
660
Wolfgang Denk1caa7072005-09-22 09:34:17 +0200661* Fix autonegotiation in tsec ethernet driver
662 Patch by Stefan Roese, 21 Sep 2005
663
Wolfgang Denk8b4c9e72005-09-21 15:31:25 +0200664* Fix bug in auto_update (trab board)
665 Patch by Martin Krause, 16 Sep 2005
666
Wolfgang Denk59d80bf2005-09-21 15:24:52 +0200667* Fix computation of framebuffer palette for 8bpp LCD bitmaps
668 Patch by Francesco Mandracci, 16 Sep 2005
669
Wolfgang Denk1806c752005-09-21 10:07:56 +0200670* Update configuration for INKA4x0 board
671
Wolfgang Denk29fe1c02005-09-21 09:59:55 +0200672* Update configuration for PM854 board
673 Based on patch by R. Loeffl, 20 Jul 2005
674
Stefan Roese053b40f2005-09-15 14:41:11 +0200675* Add PCI support to TQM8540 and TQM8560 boards
676 Patch by Stefan Roese, 15 Sep 2005
677
Stefan Roese34c0a5e2005-09-15 11:34:07 +0200678* Update AMCC Yosemite to get a consistent setup for all AMCC eval
679 boards (baudrate, environment...). Flash driver fixed.
680 Patch by Stefan Roese, 15 Sep 2005
681
Stefan Roese4a3cd9e2005-09-07 16:21:12 +0200682* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
683 ethernet port on ebony.
684 Patch by Stefan Roese, 7 Sep 2005
685
Marian Balakowicz7d454772005-09-11 15:27:12 +0200686* Added support for mtddevnum and mtddevname variables (mtdparts command)
687
Wolfgang Denk670d9f12005-09-13 00:12:33 +0200688* Change default console baud rate for stxxtc board
689
Stefan Roese9d2a8732005-08-31 12:55:50 +0200690* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
Stefan Roese9d2a8732005-08-31 12:55:50 +0200691 Patch by Stefan Roese, 31 Aug 2005
692
Wolfgang Denk80e238c2005-09-03 02:22:41 +0200693* Fix default command set (don't include CFG_CMD_DISPLAY command)
694 Patch by Pantelis Antoniou, 02 Sep 2005
695
Wolfgang Denk6d51e502005-09-03 01:58:35 +0200696* Cleanup
697
Wolfgang Denk7b3e3c52005-09-03 01:23:25 +0200698* Enable SM712 driver support for HMI1001 board.
699
Wolfgang Denk77f65802005-08-31 12:30:09 +0200700* Fix problems with ld version 2.16 (dot outside sections problem)
701 Pointed out by Gerhard Jaeger, 31 Aug 2005;
702 cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
703
704* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
705
706* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
707
708* Add keyboard and dot matrix display support for HMI1001 board.
709
710* Prepare U-Boot for gcc-4.x
711
Wolfgang Denk61dada82005-08-24 12:41:18 +0200712* Fixed Bamboo port to enable running without DDR-DIMM
713 (Bamboo has also 64MB onboard DDR)
Stefan Roesea3e4fcb2005-08-24 11:21:36 +0200714 Patch by Stefan Roese, 24 Aug 2005
715
Wolfgang Denka9fe9f42005-08-23 23:04:40 +0200716* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
717 now handling all 4xx cpu's
718 Patch by Stefan Roese, 16 Aug 2005
719
Wolfgang Denk2ac47852005-08-23 22:29:44 +0200720* Fix make dependencies for at91rm9200 and ks8695 cpus
721 Patch by Steven Scholz, 23 Aug 2005
722
Wolfgang Denkd534f5c2005-08-23 22:27:41 +0200723* Add JFFS2 support for TQM5200 board
724
Stefan Roese5e4b3362005-08-22 17:51:53 +0200725* Add esd cpci5200 and pf5200 boards
726 Patch by Reinhard Arlt, 22 Aug 2005
727
Wolfgang Denk94085692005-08-19 00:55:12 +0200728* Fix sysclock for TQM8540 and TQM8560 boards
729 Patch by Martin Krause, 25 Jul 2005
730
Wolfgang Denkc7db9a32005-08-19 00:53:02 +0200731* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
732 Patch by Martin Krause, 08 Jun 2005
733
Wolfgang Denk6617aae2005-08-19 00:46:54 +0200734* Add new board specific commands for TQM5200/STK52XX
735 - Sound commands (beep, wav, sound)
736 - Test commands (led, can, backlight, rs232)
737 Patch by Martin Krause, 02 May 2005
738
739* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
Wolfgang Denkdf3c7c82005-08-19 00:36:45 +0200740 because of a bug in the AT91RM9200 CPU PLL
741 Patch by Martin Krause, 22 Apr 2005
742
Wolfgang Denk601aed12005-08-19 00:08:55 +0200743* Add automatic HW detection for another CMC_PU2 variant
744 Patch by Martin Krause, 20 Apr 2005
745
Wolfgang Denkdbc58192005-08-18 12:21:16 +0200746* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
747 Patch by Martin Krause, 19 Apr 2005
748
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200749* Fix initialization problem on TQM5200 without SM501
Wolfgang Denk601aed12005-08-19 00:08:55 +0200750 Patch by Martin Krause, 08 Apr 2005
Wolfgang Denke8aa8242005-08-18 11:55:22 +0200751
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200752* Add RTC support for STK52XX.200
Wolfgang Denk601aed12005-08-19 00:08:55 +0200753 Patch by Martin Krause, 07 Apr 2005
Wolfgang Denk4f562f12005-08-18 11:51:12 +0200754
Wolfgang Denkdf04a3d2005-08-18 01:22:22 +0200755* Add support for IFM o2dnt board
756
Wolfgang Denk98128f32005-08-16 15:17:53 +0200757* Enable PCI on hmi1001 board
758
Wolfgang Denk87b8bd52005-08-16 09:32:45 +0200759* Fix return values of the jffs2 commands ls/fsload/fsinfo,
760 so we can use them to, e.g., check the existence of a file with
761 "if ls foo; then this; else that; fi" in the hush shell
762 Patch by Andreas Engel, 16 August 2005
763
Wolfgang Denk3d078ce2005-08-15 16:03:56 +0200764* Coding style cleanup
765
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200766* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
767 Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
768
Stefan Roeseb79316f2005-08-15 12:31:23 +0200769* Check return value of malloc in 440gx_enet.c
770 Patch by Travis B. Sawyer, 18 Jul 2005
771
772* Add Sandburst Metrobox and Sandburst Karef board support packages.
773 Second serial port on 440GX now defined as a system device.
774 Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
775 Patch by Travis B. Sawyer, 12 Jul 2005
776
777======================================================================
wdenka1191902005-01-09 17:12:27 +0000778Changes for U-Boot 1.1.3:
779======================================================================
780
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200781* Minor code cleanup
782
Wolfgang Denk50814842005-08-12 23:36:08 +0200783* Add forgotten new fils from latest VoiceBlue update
784
Wolfgang Denk396387a2005-08-12 23:34:51 +0200785* Make bootretry feature work with hush shell.
786 Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
787 Patch by Andreas Engel, 19 Jul 2005
788
Wolfgang Denkd992daf2005-08-12 23:27:18 +0200789* Update Hymod Board Database PHP code in "tools" directory
790 Patch by Murray Jensen, 01 Jul 2005
791
Wolfgang Denkf9d77ed2005-08-12 23:23:46 +0200792* Make "tr" command use POSIX compliant; export HOSTOS make variable
793 Patch by Murray Jensen, 30 Jun 2005
794
Wolfgang Denkb3b0fd52005-08-12 23:20:59 +0200795* Fix Murray Jensen's mail address.
796 Patch by Murray Jensen, 30 Jun 2005
797
Wolfgang Denkf89920c2005-08-12 23:15:53 +0200798* Preserve PHY_BMCR during a soft reset.
799 Patch by Carl Riechers, 24 Jun 2005
800
Wolfgang Denke5445282005-08-12 22:56:51 +0200801* VoiceBlue update: eeprom tool can also store firmware version now.
802 eeprom.bin is runable by jumping at load address.
803 Patch by Ladislav Michl, 23 May 2005
804
Wolfgang Denkea99a732005-08-12 22:38:37 +0200805* Move the AT91RM9200DK to the ARM Systems list.
806 Patch by Anders Larsen, 26 Apr 2005
Wolfgang Denkb2f50802005-08-12 23:43:12 +0200807
Wolfgang Denk8d4ba3d2005-08-12 22:35:59 +0200808* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
809 Patch by Anders Larsen, 26 Apr 2005
810
Wolfgang Denk4d302d62005-08-12 22:32:29 +0200811* measure_gclk() is needed when DEBUG is enabled
812 Patch by Bryan O'Donoghue, 25 Apr 2005
813
Stefan Roese8534bf92005-08-12 20:06:52 +0200814* Add UPD-Checksum code, fix problem in net.c (return instead of break)
815 Patch by Reinhard Arlt, 12 Aug 2005
816
Stefan Roese5315dfa2005-08-12 16:56:56 +0200817* esd PCI405 board updated
818 Patch by Matthias Fuchs, 28 Jul 2005
819
Stefan Roese82f4c6a2005-08-12 16:52:47 +0200820* esd WUH405 and DU405 board updated
821 Patch by Matthias Fuchs, 27 Jul 2005
822
Stefan Roese9bcf2ab2005-08-12 16:46:35 +0200823* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
824 Patch by Matthias Fuchs, 4 May 2005
825
Stefan Roese84286382005-08-11 18:03:14 +0200826* Update AMCC Yosemite to get a consistent setup for all AMCC eval
827 boards (baudrate, environment...). Flash driver fixed.
828 Patch by Stefan Roese, 11 Aug 2005
829
Stefan Roese9e005892005-08-11 17:58:40 +0200830* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
831 Patch by Stefan Roese, 11 Aug 2005
832
Stefan Roesec57c7982005-08-11 17:56:56 +0200833* Add NAND FLASH support for AMCC Bamboo 440EP eval board
834 Patch by Stefan Roese, 11 Aug 2005
835
Wolfgang Denk8f79e4c2005-08-10 15:14:32 +0200836* Add configuration for IFM AEV FIFO board.
837 Minor coding style cleanup.
838
839* Add configuration for IFM SPI eval board
840
Wolfgang Denk9d3338d2005-08-10 10:06:25 +0200841* Fix CompactFlash problem on HMI1001 board
842
Wolfgang Denkc4e0e682005-08-09 21:41:20 +0200843* Make new "mtdparts" code build with older compilers
844 Patch by Andrea Scian, 09 Aug 2005
845
Stefan Roese846b0dd2005-08-08 12:42:22 +0200846* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
847 CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
848 with the 405 defines and the linux kernel defines.
849 Patch by Stefan Roese, 08 Aug 2005
850
Wolfgang Denkc19c3132005-08-09 17:25:22 +0200851* Fix compiler warnings with older GCC versions
852
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200853* Add common (with Linux) MTD partition scheme and "mtdparts" command
854
855 Old, obsolete and duplicated code was cleaned up and replace by the
856 new partitioning method. There are two possible approaches now:
857
858 The first one is to define a single, static partition:
859
860 #undef CONFIG_JFFS2_CMDLINE
861 #define CONFIG_JFFS2_DEV "nor0"
862 #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
863 #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
864 #define CONFIG_JFFS2_PART_OFFSET 0x00000000
865
866 The second method uses the mtdparts command line option and dynamic
867 partitioning:
868
869 /* mtdparts command line support */
870 #define CONFIG_JFFS2_CMDLINE
871 #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
872 #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
873
874 Command line of course produces bigger images, and may be inappropriate
875 for some targets, so by default it's off.
876
Wolfgang Denk452e8e72005-08-08 00:47:14 +0200877* Fix build problems for PM856 Board
878
Wolfgang Denk8b019da2005-08-08 00:14:41 +0200879* Fix sign extension bug in 'fpga loadb' command;
880 make 'fpga loadb' always print the file header info
881 Patch by Andrew Dyer, 11 Jan 2005
882
Wolfgang Denkfe599e12005-08-07 23:55:50 +0200883* Fix errors that occur when accessing SystemACE CF
884 Patch by Jeff Angielski, 09 Jan 2005
Stefan Roese846b0dd2005-08-08 12:42:22 +0200885
Wolfgang Denk7ebdb192005-08-06 02:11:33 +0200886* Document switching between U-Boot and PlanetCore on RPXlite
887 by Sam Song, 24 Dec 2004
888
Wolfgang Denkd980a162005-08-06 02:03:03 +0200889* Fix PowerQUICC II mask detection.
890 Patch by Eugene Surovegin, 20 Dec 2004
Stefan Roese846b0dd2005-08-08 12:42:22 +0200891
Wolfgang Denkd06a5f72005-08-06 01:56:59 +0200892* Add support for Altera NIOS DK1C20 board
893 Patch by Shlomo Kut, 13 Dec 2004
894
Wolfgang Denkf901a832005-08-06 01:42:58 +0200895* Add support for ep8248 board
896 Patch by Yuli Barcohen, 12 Dec 2004
897
898 Minor code cleanup.
899
Wolfgang Denk56337962005-08-06 01:21:19 +0200900* Fix baudrate setting for KGDB on MPC8260
901 Patch by HoJin, 11 Dec 2004
902
Wolfgang Denk5ad73a82005-08-06 01:13:19 +0200903* Fix 'mii help' text formatting
904 Patch by Cory Tusar, 10 Dec 2004
Wolfgang Denkf901a832005-08-06 01:42:58 +0200905
Wolfgang Denk23a7a322005-08-06 01:11:12 +0200906* Fix return code of NFS command
907 Patch by Hiroshi Ito, 11 Dec 2004
908
Wolfgang Denk38362212005-08-06 01:02:27 +0200909* Fix typo
910
Wolfgang Denkc04a76e2005-08-06 00:11:50 +0200911* Fix compiler warnings in cpu/ppc4xx/usbdev.c
912 Patch by Steven Blakeslee, 04 Aug 2005
913
Stefan Roese17f50f222005-08-04 17:09:16 +0200914* Add support for AMCC Bamboo PPC440EP eval board
915 Patch by Stefan Roese, 04 Aug 2005
916
Jon Loeligerde1d0a62005-08-01 13:20:47 -0500917* Patch by Jon Loeliger
918 Fix style issues primarily in 85xx and 83xx boards.
919 - C++ comments
920 - Trailing white space
921 - Indentation not by TAB
922 - Excessive amount of empty lines
923 - Trailing empty lines
924
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200925* Patch by Ron Alder, 11 Jul 2005
Lunsheng Wangb0e32942005-07-29 10:20:29 -0500926 Add Xianghua Xiao and Lunsheng Wang's support for the
927 GDA MPC8540 EVAL board.
928
Eran Libertyf046ccd2005-07-28 10:08:46 -0500929* Patch by Eran Liberty
930 Add support for the Freescale MPC8349ADS board.
931
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200932* Patch by Jon Loeliger, 25 Jul 2005
Jon Loeliger63be1112005-07-25 15:38:06 -0500933 Move the TSEC driver out of cpu/mpc85xx as it will be shared
934 by the upcoming mpc83xx family as well.
935
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200936* Patch by Jon Loeliger, 05 May 2005
Jon Loeligerd9b94f22005-07-25 14:05:07 -0500937 Implemented support for MPC8548CDS board.
938 Added DDR II support based on SPD values for MPC85xx boards.
939 This roll-up patch also includes bugfies for the previously
940 published patches:
941 DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
942
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200943* Patch by Jon Loeliger, 10 Feb 2005
Jon Loeliger288693a2005-07-25 12:14:54 -0500944 Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
945
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200946* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
Jon Loeliger7202d432005-07-25 11:13:26 -0500947 For MPC85xxCDS:
948 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
949 for faster flash parts.
950 Add documentation for BR/OR for FLASH.
951
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200952* Patch by Jon Loeliger 08 Feb 2005
Jon Loeligerd65cfe82005-07-25 10:58:39 -0500953 Determine L2 Cache size dynamically on 85XX boards.
954
Wolfgang Denkb4f15fd2005-08-05 20:03:38 +0200955* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -0500956 - Convert the CPM2 based functionality to use new CONFIG_CPM2
957 option rather than a myriad of CONFIG_MPC8560-like variants.
958 Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
959 Eliminates the CONFIG_MPC8560 option entirely. Distributes the
960 new CONFIG_CPM2 option to each 8260 board.
wdenka1191902005-01-09 17:12:27 +0000961
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200962* Add support for MicroSys PM856 board
963 Patch by Josef Wagner, 03 Aug 2005
964
Wolfgang Denk992b4022005-08-05 11:47:10 +0200965* Minor fixes to PM854 board
966 Patch by Josef Wagner, 03 Aug 2005
967
Wolfgang Denk452f6742005-08-04 19:45:01 +0200968* Adjust configuration of XENIAX board
969 (chip select and GPIO required for USB operation)
970
Wolfgang Denk3e0bc442005-08-04 01:24:19 +0200971* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
972 routed to the Watchdog handler
973 Patch by Eugene Surovegin, 18 Jun 2005
974
Wolfgang Denkb20d0032005-08-05 12:19:30 +0200975* (re)enabled scsi commands do_scsi() and do_scsiboot()
Wolfgang Denk460c3222005-08-04 01:14:12 +0200976 Patch by Denis Peter, 06 Dec 2004
977
Wolfgang Denkc43352c2005-08-04 01:09:44 +0200978* Fix endianess problem in TFTP / NFS default filenames
979 Patch by Hiroshi Ito, 06 Dec 2004
980
Wolfgang Denk6dfa4342005-08-03 23:03:54 +0200981* Ignore broadcast status bit in received frames in 8260 FCC ethernet
982 loopback test code
983 Patch by Murray Jensen, 18 Jul 2005
984
Wolfgang Denk507d3b02005-08-03 22:58:55 +0200985* Fix typo in mkconfig script (used == instead of =)
986 Patch by Murray Jensen, 18 Jul 2005
987
Wolfgang Denkdc17fb62005-08-03 22:32:02 +0200988* Cleanup build problems on 64 bit build hosts
989
Wolfgang Denkd3b86c42005-08-03 10:01:54 +0200990* Update MAINTAINERS file
991
Stefan Roese8a316c92005-08-01 16:49:12 +0200992* Patch by Stefan Roese, 01 Aug 2005:
993 - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
994 (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
995 for details.
996 - Sycamore (PPC405GPr) eval board added (Walnut port is extended
997 to run on both 405GP and 405GPr eval boards).
998
999* Patch by Steven Blakeslee, 27 Jul 2005:
1000 - Add support for AMCC PPC440EP/GR.
1001 - Add support for AMCC Yosemite PPC440EP eval board.
1002 - Add support for AMCC Yellowstone PPC440GR eval board.
1003
Wolfgang Denk0f18cb62005-07-31 00:30:09 +02001004* Minor fixes for PPChameleon Board:
1005 - fix alignment of NAND size
1006 - make code do what the comment says
1007
Wolfgang Denkcf991922005-07-30 16:45:16 +02001008* Implement h/w sector protection status synchronization at boot.
1009 The code is provided for, and was tested on, the Yukon/Alaska
1010 and PM520 boards only.
1011
1012 A bug in flash_real_protect() for the Yukon board was fixed by
1013 adding a function that tells if two banks are on one flash chip.
1014
Wolfgang Denk15f36a52005-07-28 10:42:26 +02001015* Fix sysmon POST problem: check I2C error codes
1016 This fixes a problem of displaying bogus voltages when the voltages
1017 are so low that the I2C devices start failing while the rest of the
1018 system keeps running.
1019
Wolfgang Denke82bc622005-07-28 01:50:14 +02001020* Patch by Cedric Vincent, 6 Jul 2005:
1021 Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
1022
Wolfgang Denk2d5df632005-07-21 16:14:36 +02001023* Patch by Jon Loeliger, 20 Jul 2005:
1024 Add missing PCI IO port definitions.
1025
Wolfgang Denk08abe152005-07-21 15:23:29 +02001026* Add CompactFlash support for HMI1001 board.
1027
1028* Adjust printed board ID for LWMON board.
1029
Wolfgang Denk1a794732005-07-21 15:29:22 +02001030* Fix low-level OHCI transfers for ARM920t and MPC5xxx
1031
Wolfgang Denkf5301872005-07-21 11:45:50 +02001032* Add new argument format for flash commands to allow for usage like
1033 "erase $(addr) +$(filesize)", i. e. a size argument can be used and
1034 U-Boot will automaticially find the end of the corresponding sector.
1035
stroesecd5b2b92005-07-05 11:35:27 +00001036* Patch by Stefan Roese, 5 Jul 2005:
1037 Update uc100 board PHY setup
1038
stroese3c71f3e2005-07-01 15:53:57 +00001039* Patch by Stefan Roese, 1 Jul 2005:
1040 Fix PHY address for CATcenter board (now correct!)
1041
stroesebf418862005-06-30 13:06:07 +00001042* Patch by Stefan Roese, 30 Jun 2005:
1043 Fix PHY addresses for PPChameleon and CATcenter boards
1044 Change MAINTAINER for most esd boards
1045
wdenk88804d12005-07-04 00:03:16 +00001046* Patch by Detlev Zundel, 30 Jun 2005:
1047 Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
1048
wdenk342717f2005-06-27 13:30:03 +00001049* Fix baudrate calculation problem on MPC5200 systems
1050
1051* Add EEPROM and RTC support for HMI1001 board
1052
1053* Patch by Detlev Zundel, 20 Jun 2005:
1054 Fix initialization of low active GPIO pins on inka4x0 board
1055
wdenk024447b2005-06-20 10:28:38 +00001056* Enable redundant environment, disable HW flash protection of
1057 HMI1001 board
1058
wdenkb2532ef2005-06-20 10:17:34 +00001059* Patch by Travis Sawyer, 10 Jun 2005:
1060 Initialize allocated dev and private hw structures
1061 after their respective allocation in 440gx_enet.c
1062
1063* Patch by Steven Scholz, 10 Jun 2005:
1064 Fix byteorder problems with second argument of "bootm" with
1065 standalone images;
1066
wdenka87589d2005-06-10 10:00:19 +00001067* Add support for HMI1001 board
1068
1069* Disable "date" and "sntp" commands on TQM866M
1070
wdenk51152c12005-06-05 20:30:43 +00001071* Fix watchdog reset problems on LWMON board
1072
wdenkba91e262005-05-30 23:55:42 +00001073* Patch by Juergen Selent, 17 May 2005:
1074 Add support for Funkwerk VoVPN gateway module.
1075
1076* Cleanup debug code for MPC8220 FEC driver
1077
wdenk2eab48f2005-05-23 10:49:50 +00001078* Extend burst mode RAM test program to take a loop count
1079 (0 = infinite)
1080
1081* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
1082 those boards that use it.
1083
wdenk3a574cb2005-05-19 22:39:42 +00001084* Patches by Greg Ungerer, 19 May 2005:
1085 - add support for the KS8695P (ARM 922 based) CPU
1086 - add support for the OpenGear CM4008, CM4116 and CM4148 boards
1087
1088* Patch by Steven Scholz, 19 May 2005:
1089 Add support for CONFIG_SERIAL_TAG on ARM boards
1090
wdenk7680c142005-05-16 15:23:22 +00001091* Add PCI support for Sorcery board.
1092 Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
1093
wdenkc0176632005-05-16 14:19:49 +00001094* Fix compile problems caused by new burst mode SDRAM test;
1095 make port pins to trigger logic analyzer configurable
1096
wdenk343117b2005-05-13 22:49:36 +00001097* Fix timer handling on MPC85xx systems
1098
wdenk9dd41a72005-05-12 22:48:09 +00001099* Fix debug code in omap5912osk flash driver
1100
1101* Add support for MPC8247 based "IDS8247" board.
1102
wdenkd44e14b2005-05-10 15:51:35 +00001103* Add support for 2 x TSEC interfaces on the TQM8540 board.
1104
wdenked16fef2005-05-09 10:17:32 +00001105* On LWMON we must use the watchdog to reset the board as the CPU
1106 genereated HRESET pulse is too short to reset the external
1107 circuitry.
1108
wdenk931da932005-05-07 19:06:32 +00001109* Add test tool to exercise SDRAM accesses in burst mode
1110 (as standalone program, MPC8xx/PowerPC only)
1111
wdenk60fc6cb2005-05-05 09:13:21 +00001112* Increase CFG_MONITOR_LEN for Rattler board to match actual code
1113 size.
1114
wdenk07cc0992005-05-05 00:04:14 +00001115* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenk412babe2005-05-05 09:51:44 +00001116 March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
1117 added to support LZO and LZARI compression modes (undefined by
1118 default).
wdenk07cc0992005-05-05 00:04:14 +00001119
wdenkcf8bc572005-05-04 23:50:54 +00001120* Fix problem with symbolic links in JFFS2 code.
1121
wdenka710d4b2005-05-04 23:44:59 +00001122* Use linker ASSERT statement to prevent undetected overlapping of
1123 sections on PPChameleon board; other boards might use this, too.
1124
stroese434cf852005-05-03 06:19:57 +00001125* Patch by Stefan Roese, 03 May 2005:
1126 Update for P3G4
1127 Fix problems in cmd_universe.c
1128
1129* Patch by Matthias Fuchs, 03 May 2005:
1130 Added missing variable declaration in cmd_nand.c
1131 Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
1132
wdenk9f709b62005-04-22 15:09:09 +00001133* Fix INKA4x0: use CS1 as gpio_wkup_6 output
1134
wdenka6310922005-04-21 21:10:22 +00001135* Fix bug in the SDRAM initialization code for canmb, IceCube and
1136 PM520 boards.
1137 Fix PHY address for canmb board.
1138
wdenk7cc14382005-04-20 14:38:59 +00001139* Cleanup serial console baudrate calculation on AT91RM9200;
1140 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenkec0ca732005-04-20 12:36:05 +00001141
stroesefddae7b2005-04-20 06:52:40 +00001142* Patch by Matthias Fuchs, 18 Apr 2005:
1143 Make PCI target address spaces on PMC405 and CPCI405 boards
1144 configurable via environment variables
1145
wdenkb2323ea2005-04-20 09:28:54 +00001146* Auto-size RAM on canmb board.
1147
wdenk5e5f9ed2005-04-13 23:15:10 +00001148* Add support for canmb board
1149
stroese4c2a3662005-04-13 10:08:39 +00001150* Patch by Stefan Roese, 13 Apr 2005:
1151 Update for esd apc405
1152
wdenk2a8af182005-04-13 10:02:42 +00001153* Fixes for TQM8560 board:
1154 - fix clock rates
1155 - remove debug messages
1156 - fix flash sector protection
1157
wdenkb77fad32005-04-07 22:36:40 +00001158* Patch by Steven Scholz, 07 Apr 2005:
1159 Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
1160
wdenk2a8af182005-04-13 10:02:42 +00001161* Patches by Steven Scholz, 07 Apr 2005:
wdenkb77fad32005-04-07 22:36:40 +00001162 Fix compiler warning in altera.c
wdenk2a8af182005-04-13 10:02:42 +00001163 Fix warning in cpu/arm920t/at91rm9200/i2c.c
wdenkb77fad32005-04-07 22:36:40 +00001164
1165* Patch by Ladislav Michl, 06 Apr 2005:
1166 Fix voiceblue configuration.
1167
stroese7ec25502005-04-07 05:35:12 +00001168* Patch by Stefan Roese, 06 Apr 2005:
1169 Updates for OCOTEA board:
1170 - Changed U-Boot size from 512kByte to 256kByte
1171 - Fixed flash driver to support boot from soldered user flash
1172 - Added README for switch from PIBS firmware to U-Boot
1173
1174* Patch by Travis Sawyer, 05 Apr 2005:
1175 - Change timer frequency for ppc 440 from 10 ms to 1 ms.
1176 Problem found by Andrew Wozniak.
1177
wdenka85f9f22005-04-06 13:52:31 +00001178* Patch by Steven Scholz, 06 Apr 2005:
1179 - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
1180 - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
1181
wdenk20787e22005-04-06 00:04:16 +00001182* Patches by Robert Whaley, 29 Nov 2004:
1183 - update the pxa-regs.h file for PXA27x chips
1184 - add PXA27x based ADSVIX board
1185 - add support for MMC on PXA27x processors
1186
1187* Patch by Andrew E. Mileski, 28 Nov 2004:
1188 Fix PPC4xx SPD SDRAM detection bug
1189
1190* Patch by Hiroshi Ito, 26 Nov 2004:
1191 Fix logic of "test -z" and "test -n" commands
1192
wdenk3c2b3d42005-04-05 23:32:21 +00001193* Patch by Ladislav Michl, 05 Apr 2005:
1194 Add support for VoiceBlue board.
1195
1196* Patch by Ladislav Michl, 05 Apr 2005:
1197 Fix netboot_common() prototypes.
1198
wdenkb304c962005-04-05 22:30:50 +00001199* Patch by Steven Scholz, 05 Apr 2005:
1200 Use i.MX watchdog timer for reset_cpu()
1201
1202* Patch by Steven Scholz, 05 Apr 2005:
1203 Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
1204 subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
1205 (now in interupts.c)
1206
wdenk12b43d52005-04-05 21:57:18 +00001207* Add support for MPC8220 based "sorcery" board.
1208
1209* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +00001210
wdenk3dd7f0f2005-04-04 23:43:44 +00001211* Add FEC support for TQM8540 board.
1212 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
1213
1214* Patch by Martin Krause, 04 Apr 2005:
1215 Update default configuration for CMC_PU2 board.
1216
wdenkba83a302005-04-04 12:23:03 +00001217* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +00001218 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
1219 - introduce two new configuration options instead:
1220 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
1221
1222* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +00001223 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
1224
wdenk101e8df2005-04-04 12:08:28 +00001225* Fix timer code for ARM systems: make sure that udelay() does not
1226 reset timers so it's save to use udelay() in timeout code.
1227
wdenk50712ba2005-04-03 23:35:57 +00001228* Patch by Mathias Küster, 23 Nov 2004:
1229 add udelay support for the mcf5282 cpu
1230
1231* Patch by Tolunay Orkun, 16 November 2004:
1232 fix incorrect onboard Xilinx CPLD base address
wdenk3c2b3d42005-04-05 23:32:21 +00001233
wdenk901787d2005-04-03 23:22:21 +00001234* Patch by Jerry Van Baren, 08 Nov 2004:
1235 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
1236 the jumper for the HRCW source should select flash. If lowboot is
1237 not selected, the jumper for the HRCW source should select the
1238 BCSR.
1239 - change default load base address to 0x00400000
1240
wdenk8b0bfc62005-04-03 23:11:38 +00001241* Patch by Yuli Barcohen, 08 Nov 2004:
1242 Add support for Analogue & Micro Rattler boards.
1243 Tested on Rattler8248.
1244
1245* Patch by Andre Renaud, 08 Nov 2004:
1246 Fix watchdog support in common/lcd.c
1247
1248* Patch by Marc Leeman, 05 Nov 2003:
1249 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
1250 bug only affects the XPC8245 processors
1251
wdenk384cc682005-04-03 22:35:21 +00001252* Patches by Josef Wagner, 29 Oct 2004:
1253 - Add support for MicroSys CPU87 board
1254 - Add support for MicroSys PM854 board
1255
1256* Patch by Jian Zhang, 02 Nov 2004:
1257 Add 16-bit NAND support
1258
wdenkc1a11c12005-04-03 21:11:16 +00001259* Patch by Scott McNutt, 01 Nov 2004:
1260 Add missing NIOS/NIOS2 support for "iminfo" command
1261
1262* Patch by Detlev Zundel, 29 Oct 2004:
1263 Add missing NIOS/NIOS2 support for "mkimage" tool.
1264
wdenk63153492005-04-03 20:55:38 +00001265* Patch by David Adair, 27 Oct 2004:
1266 Add missing 440GX SDRAM Controller reset
1267
wdenk3ec924a2005-04-03 17:23:39 +00001268* Patch by Steven Scholz, 25 Oct 2004:
1269 Declare reset_cpu() in include/common.h instead locally
1270
wdenk756f5862005-04-03 15:51:42 +00001271* Patch by Yusdi Santoso, 22 Oct 2004:
1272 - Add support for HIDDEN_DRAGON board
1273 - fix endianess problem in driver/rtl1839.c
1274
1275* Patch by Allen Curtis, 21 Oct 2004:
1276 support multiple serial ports
1277
wdenkb1bf6f22005-04-03 14:52:59 +00001278* Patch by Richard Klingler, 03 Apr 2005:
1279 Add call to eth_halt() in net/net.c when called functions fail
1280 after eth_init() has been called.
1281
1282* Patch by Sam Song, 3 April 2005:
1283 - Update README.Netconsole
1284 - Update README
1285
wdenk400558b2005-04-02 23:52:25 +00001286* Prepare for SoC rework of ARM code:
1287 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
1288 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +00001289 Patch by Steven Scholz, 03 Apr 2005:
1290 - create SoC specific directories include/asm-arm/arch-imx and
1291 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +00001292
wdenk414eec32005-04-02 22:37:54 +00001293* Fix problems with SNTP support;
1294 enable SNTP support in some boards.
1295
wdenkbe6b6e42005-04-01 15:18:44 +00001296* Patches by Martin Krause, 01 Apr 2005:
1297 - Fix flash erase timeout on CMC_PU2
1298 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +00001299
wdenkf50cc092005-04-01 09:14:58 +00001300* Patch by Steven Scholz, 13 March 2005:
1301 fix cache enabling for AT91RM9200
1302
wdenkea287de2005-04-01 00:25:43 +00001303* Patch by Masami Komiya, 30 Mar 2005:
1304 add SNTP support and expand time server and time offset fields of
1305 DHCP support. See doc/README.SNTP
1306
1307* Patch by Steven Scholz, 13 Dec 2004:
1308 Fix bug in at91rm920 ethernet driver
1309
wdenkef2807c2005-03-31 23:44:33 +00001310* Patch by Steven Scholz, 13 Dec 2004:
1311 Remove duplicated code by merging memsetup.S files for
1312 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
1313
wdenk83e40ba2005-03-31 18:42:15 +00001314* Patch by Detlev Zundel, 31 Mar 2005:
1315 Cleanup duplicate definition of overwrite_console()
1316
1317* Update TQM5200 configuration;
1318 prepare for Rev. 200 starter kit boards
1319
wdenk0c1c117c2005-03-30 23:28:18 +00001320* Patch by Scott McNutt, 21 Oct 2004:
1321 Add support for Nios-II EPCS Controller core.
1322
1323* Patch by Scott McNutt, 20 Oct 2004:
1324 Nios-II cleanups:
1325 - Add sysid command (Nios-II only).
1326 - Locate default exception trampoline at proper offset.
1327 - Implement I/O routines (readb, writeb, etc)
1328 - Implement do_bootm_linux
1329
wdenk8f0b7cb2005-03-27 23:41:39 +00001330* Patches by Martin Krause, 22 Mar 2005:
1331 - use TQM5200_auto as MAKEALL target for TQM5200 systems
1332 - add support for SM501 graphics controller
1333 - add support for graphic console on TQM5200
1334 - add support for TQM5200 Rev 200
1335 - cleanup, fix typo in include/configs/TQM5200.h
1336
wdenk256d31c2005-03-20 22:33:46 +00001337* Patch by Manfred Baral, 17 Mar 2005:
1338 Fix typo
1339
wdenke6325152005-03-17 16:43:10 +00001340* Fix RTC configuration for PPChameleon board
1341
1342* Cleanup, fix typo in include/configs/TQM5200.h
1343
stroeseacdcd102005-03-16 20:58:31 +00001344* Patch by Stefan Roese, 16 Mar 2005:
1345 Update for esd auto_update and hh405 board
1346
wdenk89c02e22005-03-16 16:32:26 +00001347* Adapt for U-Boot image size (new features enabled) on TQM5200
1348
wdenk6c9e7892005-03-15 22:56:53 +00001349* Update code for TQM8540 board (and 85xx in general):
1350 - Change the name of the Ethernet driver: MOTO ENET -> ENET
1351 - Reformat boot messages
1352 - Enable redundant environment
1353 - Replace the -O2 optimization flag with -mno-string
1354
wdenk9d46ea42005-03-14 23:56:42 +00001355* Patch by David Brownell, 10 Mar 2005:
1356 Restore copyright statements in OHCI drivers.
1357
1358* Add support for TQM8540 board
1359
wdenkc3fafec2005-03-14 23:01:03 +00001360* Patch by Detlev Zundel, 14 Mar 2005:
1361 NC650: changed NAND flash addressing to using UPMB
1362
1363* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +00001364 Update for esd voh405 fpga image
1365
wdenka0bdf492005-03-14 13:14:58 +00001366* INKA4x0: Allow initialization of LCD backlight dimming from
1367 "brightness" environment variable.
1368
wdenkf4733a02005-03-06 01:21:30 +00001369* Add port initialization for digital I/O on INKA4x0
1370
wdenkc3fafec2005-03-14 23:01:03 +00001371* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +00001372 Update for esd boards dp405 and hub405
1373
wdenkb05dcb52005-03-04 11:27:31 +00001374* Fix get_partition_info() parameter error in all other calls
1375 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
1376
1377* Enable USB and IDE support for INKA4x0 board
1378
wdenkc3fafec2005-03-14 23:01:03 +00001379* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +00001380 fix ext2load passing an incorrect pointer to get_partition_info()
1381 resulting in load failure for devices other than 0
1382
wdenke58cf2a2005-02-27 23:46:58 +00001383* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
1384
wdenk1968e612005-02-24 23:23:29 +00001385* Cleanup USB and partition defines
1386
wdenk151ab832005-02-24 22:44:16 +00001387* Add support for ext2 filesystems and image timestamps to TQM5200 board
1388
1389* Add reset code for Coral-P on INKA4x0 board
1390
1391* Patch by Martin Krause, 28 Jun 2004:
1392 Update for TRAB board.
1393
1394* Fix some missing "volatile"s in MPC5xxx FEC driver
1395
wdenke799d372005-02-07 19:44:17 +00001396* Fix cirrus voltage detection (for CPC45)
1397
wdenkf8883cb2005-02-04 15:38:08 +00001398* Fix byteorder problem in usbboot and scsiboot commands.
1399
wdenk20a80412005-02-04 15:02:06 +00001400* Patch by Cajus Hahn, 04 Feb 2005:
1401 - don't insist on leading '/' for filename in ext2load
1402 - set default partition to useful value (1) in ext2load
1403
1404* Patch by Andrew Dyer, 08 Jan 2005:
1405 fix wrong return codes in ext2 code
1406
wdenk1a344f22005-02-03 23:00:49 +00001407* Removed '--no-warn-mismatch' option from Makefile. This option
1408 makes 'ld' to overlook binary objects compatibility.
1409
1410* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
1411 --end-group) outside of the group. This will make 'ld' to do
1412 _multiple_ search in the library group when resolving symbol
1413 references and do only a _single_ seach in libgcc.a after the group
1414 search.
1415
1416* Fix stability problems on CPC45 board again.
1417
1418* Make image detection for diskboot / usbboot / scsiboot more robust
1419 (also check header checksum)
1420
wdenk436be292005-01-31 22:09:11 +00001421* Update CPC45 board configuration.
1422
1423* Add USB and PCI support for INKA4x0 board
1424
wdenkcd172b72005-01-22 18:26:04 +00001425* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
1426
wdenkc3d2b4b2005-01-22 18:13:04 +00001427* Code cleanup
1428
wdenk5a95f6f2005-01-12 00:38:03 +00001429* Patch by Robin Getz, 13 Oct 2004:
1430 Add standalone application to change SMC91C111 MAC addresses,
1431 see examples/README.smc91111_eeprom
1432
1433* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
1434 Fix Flash support for ARM Integrator CP.
1435
wdenk289f9322005-01-12 00:15:14 +00001436* Patch by Richard Woodruff, 10 Jan 2005:
1437 Update support for OMAP2420 (ARM11) and H4 board:
1438 o clean up and add new types to H4 memory probe code.
1439 o fix to work with internal boot.
1440 o added PRCM config III operation.
1441 o fix marginal flash timings.
1442 o add revison ATAG usage.
1443 o enable voltage scaling at power chip.
1444 o fix compile error for i2c.
1445
1446* Fix network problem (error when receiving multiple ARP packets)
1447
1448* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +00001449 Add support for Wind River sbc405 board
1450
1451* Patch by Rainer Brestan, 12 Oct 2004:
1452 Make examples/Makefile more robust
1453
wdenk6225c5d2005-01-09 23:33:49 +00001454* Patch by Sam Song, 11 October 2004:
1455 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
1456 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
1457 less than 50MHz
1458
1459* Patch by Sam Song, 10 Oct 2004:
1460 Fix a parameter error in run_command() in main.c
1461
1462* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +00001463 add support for the TI OMAP2420 processor and its H4 reference
1464 board
1465
1466* Patch by Christian Pellegrin, 24 Sep 2004:
1467 Added support for NE2000 compatible (DP8390, DP83902) NICs.
1468
wdenkff36fd82005-01-09 22:28:56 +00001469* Patch by Leif Lindholm, 23 Sep 2004:
1470 add support for the AMD db1550 board
1471
1472* Patch by Travis Sawyer, 15 Sep 2004:
1473 Add CONFIG_SERIAL_MULTI support for ppc4xx,
1474 update README.serial_multi
1475
wdenk6310eb92005-01-09 21:28:15 +00001476* Patches by David Snowdon, 07 Sep 2004:
1477 - add u-boot.hex target in the top level Makefile
1478 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
1479 - use -mtune=xscale and -march=armv5 options for PXA
1480
wdenka562e1b2005-01-09 18:21:42 +00001481* Patch by Florian Schlote, 08 Sep 2004:
1482 Add support for SenTec-COBRA5272-board (Coldfire).
1483
wdenk30ce5ab2005-01-09 18:12:51 +00001484* Patch by Gleb Natapov, 07 Sep 2004:
1485 mpc824x: set PCI latency timer to a sane value
1486 (is 0 after reset).
1487
1488* Patch by Kurt Stremerch, 03 Sep 2004:
1489 Add bitstream configuration option for fpga command (Xilinx only).
1490
wdenk9dd611b2005-01-09 17:19:34 +00001491* Patch by Kurt Stremerch, 03 Sep 2004:
1492 Add Xilinx Spartan2E family FPGA support
1493
1494* Patch by Jeff Angielski, 02 Sep 2004:
1495 Add Added support for H2 revision of the EP8260 board.
1496 Fixed formatting for some of the EP8260 related source files.
1497
wdenka1191902005-01-09 17:12:27 +00001498* Patch by Jon Loeliger, 02 Sep 2004:
1499 Reset monitor size back to 256 so environment can be written
1500 to flash on MPC85xx ADS and CDS releases.
1501
1502* Patch by Paolo Broggini, 02 Sep 2004:
1503 Make BSS clearing on ARM systems more robust
1504
1505* Patch by Yue Hu and Joe, 01 Sep 2004:
1506 - add PCI support for ixp425;
1507 - add EEPRO100 suppor tfor ixdp425 board.
1508
1509* Fix problem with protected sector detection in driver/cfi_flash.c
1510
1511======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +00001512Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +00001513======================================================================
1514
wdenke2ffd592004-12-31 09:32:47 +00001515* Code cleanup, mostly for GCC-3.3.x
1516
1517* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
1518 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
1519 additional ethernet addresses.
1520
1521* Cleanup drivers/i82365.c - avoid duplication of code
1522
1523* Fix bogus "cannot span across banks" flash error message
1524
1525* Code cleanup
1526
1527* Add support for CompactFlash for the CPC45 Board.
1528
wdenk08f27272004-12-19 21:39:27 +00001529* Fix problems with CMC_PU2 flash driver.
1530
wdenkec0aee72004-12-19 09:58:11 +00001531* Cleanup:
1532 - avoid trigraph warning in fs/ext2/ext2fs.c
1533 - rename UC100 -> uc100
1534
wdenkf7d15722004-12-18 22:35:43 +00001535* Add support for UC100 board
1536
stroese8cba19072004-12-16 18:47:58 +00001537* Patch by Stefan Roese, 16 Dez 2004:
1538 - ext2fs support added
1539 - Tundra universe support added
1540 - Coldfire MCF5249 support added (no preloader needed!)
1541 - MCF5249 board TASREG added
1542 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
1543 VOM405, WUH405
1544 - some esd boards updated
1545 - memory commands "mdc" and "mwc" added for cyclic read/write
1546 (CONFIG_MX_CYCLIC, see README for further description)
1547
wdenk138ff602004-12-16 15:52:40 +00001548* Add support for INKA4X0 board
1549
wdenk689aec12004-12-13 00:18:44 +00001550* Patch by Steven Scholz, 12 Dec 2004:
1551 Fix typo in AT91 memory setup.
1552
wdenk7e6bf352004-12-12 22:06:17 +00001553* Patch by Martin Krause, 27 Oct 2004:
1554 - add support for "STK52xx" board (including PS/2 multiplexer)
1555 - add hardware detection for TQM5200
1556
wdenk25d67122004-12-10 11:40:40 +00001557* Clean up CMC PU2 flash driver
1558
1559* Update MAINTAINERS file
1560
1561* Fix bug in MPC823 LCD driver
1562
wdenked54e622004-11-24 23:35:19 +00001563* Fix udelay() on AT91RM9200 for delays < 1 ms.
1564
1565* Enable long help on CMC PU2 board;
1566 fix reset issue;
1567 increase CPU speed from 179 to 207 MHz.
1568
wdenkbb310d42004-11-22 22:20:07 +00001569* Fix smc91111 ethernet driver for Xaeniax board (need to handle
1570 unaligned tail part specially).
1571
wdenk9d5028c2004-11-21 00:06:33 +00001572* Update for AT91RM9200DK and CMC_PU2 boards:
1573 - Enable booting directly from flash
1574 - fix CMC_PU2 flash driver
1575
1576* Fix mkimage usage message
1577
wdenkcacfab52004-11-17 20:44:20 +00001578* Map SRAM on NC650 board
1579
wdenk1f6d4252004-11-02 13:00:33 +00001580* Work around for Ethernet problems on Xaeniax board
1581
wdenk983fda82004-10-28 00:09:35 +00001582* Patch by TsiChung Liew, 23 Sep 2004:
1583 - add support for MPC8220 CPU
1584 - Add support for Alaska and Yukon boards
1585
wdenke3c9b9f2004-10-24 23:54:40 +00001586* Fix configuration for ERIC board (needs more room)
1587
1588* Adjust MIPS compiler options at run-time depending on tools version
1589 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
1590 "-mcpu=4kc" for old tools)
1591
wdenk14699a22004-10-19 22:17:51 +00001592* Add passing of the command line and memory size information to the
1593 kernel on xaeniax board.
1594
wdenk4cfaf552004-10-11 23:03:10 +00001595* Enable NAND flash support for NC650 board.
1596
1597* Patch by Thomas Lange 07 Oct 2004:
1598 Updated README for DBAu1x00 boards to match current status
1599
wdenkd407bf52004-10-11 22:51:13 +00001600* Patch by Philippe Robin, 28 Sept 2004:
1601 Fix Flash support for Versatile.
1602
1603* Patch by Roger Blofeld, 16 Sep 2004:
1604 Fix timeout for DHCP command retry
1605
wdenk2ee66532004-10-11 22:43:02 +00001606* Patch by Pantelis Antoniou, 14 Sep 2004:
1607 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
1608
1609* Patch by Pantelis Antoniou, 14 Sep 2004:
1610 Kick watchdog when bz-decompressing
1611
wdenk9455b7f2004-10-11 22:25:49 +00001612* Fix CFG_HZ problems on AT91RM9200 systems
1613 [Remember: CFG_HZ should be 1000 on ALL systems!]
1614
wdenke1599e82004-10-10 23:27:33 +00001615* Patch by Gridish Shlomi, 30 Aug 2004:
1616 - Add support to revA version of PQ27 and PQ27E.
1617 - Reverted MPC8260ADS baudrate back to original 115200
1618
1619* Patch by Hojin, 17 Sep 2004:
1620 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +00001621
wdenke1599e82004-10-10 23:27:33 +00001622* Patch by Mark Jonas, 09 September 2004:
1623 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
1624 error message
1625
1626* Patch by Mark Jonas, 31 August 2004:
1627 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
1628 improves FTP performance for MPC5200 systems. Enabled for IceCube
1629 by default.
1630
wdenkc15f3122004-10-10 22:44:24 +00001631* Patch by Michael Bendzick, 30 Aug 2004:
1632 - Improve platform.S code for omap1510inn that detects whether code
1633 is running from SDRAM or not. Patch allows SDRAM to be configured
1634 if code is running out of SRAM at 0x20000000.
1635
1636* Patch by Frederick Klatt, 30 Aug 2004:
1637 Add support for the Wind River SBC8540/SBC8560 boards
1638
wdenk656658d2004-10-10 22:16:06 +00001639* Configure SX1 board to use drivers/cfi_flash.c
1640
1641* Patches by Michael Bendzick, 30 Aug 2004:
1642 - Configure omap1510inn board to use drivers/cfi_flash.c
1643 - Make drivers/cfi_flash.c protect environment and redundant
1644 environment.
1645
1646* Patch by Steven Scholz, 23 Jun 2004:
1647 - Add script (tools/img2brec.sh) to programm U-Boot into
1648 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
1649
wdenk5c952cf2004-10-10 21:27:30 +00001650* Patches by Scott McNutt, 24 Aug 2004:
1651 - Add support for Altera Nios-II processors.
1652 - Add support for Psyent PCI-5441 board.
1653 - Add support for Psyent PK1C20 board.
1654
wdenk03f5c552004-10-10 21:21:55 +00001655* Patches by Jon Loeliger, 24 Aug 2004:
1656 - Add support for the MPC8541 and MPC8555 CDS boards
1657 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
1658 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +00001659 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
1660 from board_early_init_f()
1661 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +00001662
wdenk08b6aa62004-10-10 18:49:14 +00001663* Patches by George G. Davis, 24 Aug 2004:
1664 - Enable ramdisk/initrd tagged param support for omap1610h2_config
1665 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +00001666 - update ARM boards to use constants from mach-types.h
1667
wdenkb6508512004-10-10 18:03:33 +00001668* Patch by Gary Jennejohn, 04 Oct 2004:
1669 - fix I2C on at91rm9200
1670 - add support for Ricoh RS5C372A RTC
1671
wdenk2cbe5712004-10-10 17:05:18 +00001672* Patch by Gary Jennejohn, 01 Oct 2004:
1673 - add support for CMC PU2 board
1674 - add support for I2C on at91rm9200
1675
1676* Patch by Gary Jennejohn, 28 Sep 2004:
1677 fix baudrate handling on at91rm9200
1678
wdenk659883c2004-10-09 23:33:42 +00001679* Patch by Yuli Barcohen, 22 Aug 2004:
1680 - remove ZPC.1900 board-specific flash driver;
1681 switch the port to generic CFI driver;
1682 - port clean-up
1683
wdenkf325e182004-10-09 23:28:40 +00001684* Patch by Hinko Kocevar, 21 Aug 2004:
1685 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
1686
wdenk8655b6f2004-10-09 23:25:58 +00001687* Clean up tools/bmp_logo.c to not add trailing white space
1688
1689* Patch by Hinko Kocevar, 21 Aug 2004:
1690 - Group common framebuffer functions in common/lcd.c
1691 - Group common framebuffer macros and #defines in include/lcd.h
1692 - Provide calc_fbsize() for video ATAG
1693
wdenk30d56fa2004-10-09 22:44:59 +00001694* Patch by Sam Song, 21 August 2004:
1695 - Fix a typo in README
1696 - Align "(RO)" output for "flinfo" after "protect on"
1697 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
1698 ratio 1:1 when core frequency less than 50MHz
1699
wdenk8655b6f2004-10-09 23:25:58 +00001700* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +00001701 - fix some "use of label at end of compound statement" warnings
1702 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
1703
wdenk1d9f4102004-10-09 22:21:29 +00001704* Patch by Steven Scholz, 16 Aug 2004:
1705 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
1706 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
1707 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
1708 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
1709 into cpu/arm920t/$(SOC)/
1710
wdenka5bbcc32004-09-29 22:55:14 +00001711* Patches by Sean Chang, 09 Aug 2004:
1712 - Added support for both 8 and 16 bit mode access to System ACE CF
1713 through MPU.
1714 - Fixed missing System ACE CF device during get FAT partition info
1715 in fat_register_device function.
1716 - Enabled System ACE CF support on ML300.
1717
1718* Patch by Sean Chang, 09 Aug 2004:
1719 Synch defines for saveenv and do_saveenv functions so they get
1720 compiled under the same statement.
1721
1722* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001723 - Added I2C support for ML300.
1724 - Added support for ML300 to read out its environment information
1725 stored on the EEPROM.
1726 - Added support to use board specific parameters as part of
1727 U-Boot's environment information.
1728 - Updated MLD files to support configuration for new features
1729 above.
1730
wdenka5bbcc32004-09-29 22:55:14 +00001731* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +00001732 - Remove incorrect bridge settings for eth group 6
1733 - Add call to setup bridge in ppc_440x_eth_initialize
1734 - Fix ppc_440x_eth_init to reset the phy only if its the
1735 first time through, otherwise, just check the phy for the
1736 autonegotiated speed/duplex. This allows the use of netconsole
1737 - only print the speed/duplex the first time the phy is reset.
1738
wdenkda93ed82004-09-29 11:02:56 +00001739* Patch by Shlomo Kut, 29 Mar 2004:
1740 Add support for MKS Instruments "Quantum" board
1741
1742* Fix build problem with Cogent boards;
1743 avoid using <asm/byteorder.h> when using the host compiler
1744
wdenka5725fa2004-09-28 21:51:42 +00001745* Patch by Ganapathi C, 04 Aug 2004:
1746 Fix NFS timeout issue
1747
wdenke1a3f6b2004-09-28 21:39:45 +00001748* Patch by Yuli Barcohen, 19 Jul 2004:
1749 - Fix host tools building in Cygwin environment
1750 - Fix header files search order for host tools
1751
1752* Patch by Tom Armistead, 19 Jul 2004:
1753 Fix kgdb.S support for 74xx_75x cpu
1754
wdenkc65fdc72004-09-28 21:26:26 +00001755* Patch by Jon Loeliger, 15 Jul 2004:
1756 Fix MPC85xx I2C driver
1757
wdenk64f70be2004-09-28 20:34:50 +00001758* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
1759
wdenkcce625e2004-09-28 19:00:19 +00001760* Patch by Stephen Williams, 15 July 2004
1761 Set the PCI class code for JSE board as part of PCI interface setup
1762
1763* Patch by Michael Bendzick, 15 Jul 2004:
1764 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
1765 CFG_FLASH_USE_BUFFER_WRITE is set
1766
wdenk66ca92a2004-09-28 17:59:53 +00001767* Patch by Yuli Barcohen, 13 Jul 2004:
1768 Allow clock setting on MPC866/MPC885 series chips according to
1769 environment variable `cpuclk'
1770
1771* Patch by Yuli Barcohen, 20 Apr 2004:
1772 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
1773
wdenk4ec3a7f2004-09-28 16:44:41 +00001774* Patch by Vincent Dubey, 24 Sep 2004:
1775 Add support for xaeniax board
1776
wdenk79536a62004-09-27 20:20:11 +00001777* Add comment about non-GPL character of standalone applications to
1778 COPYING file
1779
1780* Fix FEC ethernet problem on NSCU board.
1781
wdenk4734cb72004-09-21 23:33:32 +00001782* Patch by Gary Jennejohn, 09 Sep 2004:
1783 allow to use USART1 as console port on at91rm9200dk boards
1784
stroesec3548392004-09-16 12:37:13 +00001785* Patch by Stefan Roese, 16 Sep 2004:
1786 Update AR405 board.
1787
wdenk1d6f9722004-09-09 17:44:35 +00001788* Fix SysClk handling for PPChameleon and CATcenter boards
1789
wdenkeedcd072004-09-08 22:03:11 +00001790* Patch by Detlev Zundel, 08 Sep 2004:
1791 Update etags build target
1792
1793* Improve NetConsole support: add support for broadcast destination
1794 address and buffered input.
1795
1796* Cleanup compiler warnings for GCC 3.3.x and later
1797
1798* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
1799
wdenk7ca202f2004-08-28 22:45:57 +00001800* Add support for IDS "NC650" board
1801
wdenk31a64922004-08-28 21:09:14 +00001802* Add automatic update support for LWMON board
1803
1804* Clear Block Lock-Bits when erasing flash on LWMON board.
1805
1806* Fix return code of "fatload" command
1807
1808* Enable MSDOS/VFAT filesystem support for LWMON board
1809
wdenk89394042004-08-04 21:56:49 +00001810* Patch by Martin Krause, 03 Aug 2004:
1811 change timing for SM501 graphics controller on TQM5200 module
1812
1813* Patch by Mark Jonas, 13 July 2004:
1814 - Total5200 LCD now run in little endian mode. Endianess conversion
1815 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +00001816 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +00001817
wdenk429168e2004-08-02 23:39:03 +00001818* Patches by Lars Munch, 12 Jul 2004:
1819 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
1820 board specific
1821 - split out the LXT971A PHY from ns_9750_eth.h
1822 - split the dm9161 phy part out of at91rm9200_ether.c
1823
wdenk6705d812004-08-02 23:22:59 +00001824* Patch by Andreas Engel, 12 Jul 2004:
1825 Replaced hardcoded PL011 clock frequency with config variable.
1826 Fixed wrong CONFIG_CMD_DFL doc.
1827
1828* Patch by Thomas Viehweger, 09 Jun 2004:
1829 make it possible to remove chpart when there is only one partition
1830
wdenk68ceb292004-08-02 21:11:11 +00001831* Add support for console over UDP (compatible to Ingo Molnar's
1832 netconsole patch under Linux)
1833
wdenk9aea9532004-08-01 23:02:45 +00001834* Patch by Jon Loeliger, 16 Jul 2004:
1835 - support larger DDR memories up to 2G on the PC8540/8560ADS and
1836 STXGP3 boards
1837 - Made MPC8540/8560ADS be 33Mhz PCI by default.
1838 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
1839 and CONFIG_L2_INIT_RAM options.
1840 - Refactor Local Bus initialization out of SDRAM setup.
1841 - Re-implement new version of LBC11/DDR11 errata workarounds.
1842 - Moved board specific PCI init parts out of CPU directory.
1843 - Added TLB entry for PCI-1 IO Memory
1844 - Updated README.mpc85xxads
1845
wdenk281e00a2004-08-01 22:48:16 +00001846* Patch by Sascha Hauer, 28 Jun:
1847 - add generic support for Motorola i.MX architecture
1848 - add support for mx1ads, mx1fs2 and scb9328 boards
1849
1850* Patches by Marc Leeman, 23 Jul 2004:
1851 - Add define for the PCI/Memory Buffer Configuration Register
1852 - corrected comments in cpu/mpc824x/cpu_init.c
1853
1854* Add support for multiple serial interfaces
1855 (for example to allow modem dial-in / dial-out)
1856
stroese45eeb892004-07-15 14:41:43 +00001857* Patch by Stefan Roese, 15 Jul 2004:
1858 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
1859
wdenkcfca5e62004-08-01 13:09:47 +00001860* Fix NSCU config; add ethernet wakeup code.
1861
wdenk281e00a2004-08-01 22:48:16 +00001862* Add link for preloader for Motorola Coldfire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +00001863
wdenk75b1fa72004-07-12 22:34:51 +00001864* Patch by Michael Bendzick, 12 Jul 2004:
1865 fix output formatting in drivers/cfi_flash.c
1866
wdenk07cba352004-07-12 14:37:59 +00001867* Patch by Mark Jonas, 02 Jul 2004:
1868 Fix lowboot (again) on MPC5xxx
1869
wdenkcdc7fea2004-07-11 22:27:55 +00001870* Patch by Curt Brune, 07 Jul 2004:
1871 relocate exception vectors on arm720t if needed
1872
wdenka1f4a3d2004-07-11 22:19:26 +00001873* Patch by George G. Davis, 06 Jul 2004:
1874 - update mach-types.h to latest arm.linux.org.uk master list
1875 - Set correct OMAP1610 bi_arch_number for build target
1876
1877* Patch by Curt Brune, 06 Jul 2004:
1878 evb4510: add support for timer interrupt; cleanup
1879
wdenkb9283e22004-07-11 21:49:42 +00001880* Patch by Dan Poirot, 06 Jul 2004:
1881 Fix sbc8260 environment variables
1882
1883* Cleanup redundand "console" environment variable
1884
wdenk81050922004-07-11 20:04:51 +00001885* Patch by Mark Jonas, 05 Jul 2004:
1886 add support for the Total5100's and Total5200's LCD screen
1887
1888* Patches by Dan Eisenhut, 01 Jul 2004:
1889 - README fixes.
1890 - Move doc2000.h include to prevent compiler warning on some boards
1891
wdenk6c7a1402004-07-11 19:17:20 +00001892* Patch by Mark Jonas, 01 Jul 2004:
1893 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
1894 MGT5100 and MPC5200 based Freescale platforms.
1895
wdenkbc54f302004-07-11 18:10:30 +00001896* Patch by Philippe Robin, 01 Jul 2004:
1897 Add initialization for Integrator and versatile board files.
1898
1899* Patch by Hinko Kocevar, 01 Jun 2004:
1900 Fix VFD FB allocation, add LCD FB allocation on ARM
1901
wdenk56523f12004-07-11 17:40:54 +00001902* Patch by Martin Krause, 30 Jun 2004:
1903 Add support for TQM5200 board
1904
1905* Patch by Martin Krause, 29 Jun 2004:
1906 Add loopw command: infinite write loop on address range
1907
wdenk857cad32004-07-10 23:48:41 +00001908* Patches by Yasushi Shoji, 29 Jun 2004:
1909 - add empty include/asm-microblaze/processor.h
1910 - add to CREDITS and MAINTAINERS
1911 - add gd initialization
1912 - add MicroBlaze and SUZAKU board to MAKEALL script
1913 - add reset support for SUZAKU
1914 - add flush_cache() for MicroBlaze
1915 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
1916 size flash memory on SUZAKU
1917
wdenkfabd46a2004-07-10 23:11:10 +00001918* Patch by Prakash Kumar, 27 Jun 2004:
1919 Add support for the PXA250 based Intrinsyc Cerf board.
1920
1921* Patch by Yasushi Shoji, 27 Jun 2004:
1922 fix comment in include/common.h
1923
wdenk466b7412004-07-10 22:35:59 +00001924* Rename SBC8560 into sbc8560 for consistency
1925
1926* Patch by Daniel Poirot, 24 Jun 2004:
1927 Add support for Wind River's sbc8240 board
1928
1929* Patches by Yasushi Shoji, 26 Jun 2004:
1930 - drivers/serial_xuartlite.c: fix "return 0" in void function
1931 - add microblaze support to mkimage tool
1932
wdenk8b07a112004-07-10 21:45:47 +00001933* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +00001934 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +00001935
1936* Patch by Nicolas Lacressonniere, 24 Jun 2004
1937 Small Bugs fixes for "at91rm9200dk" board:
1938 - Timing modifications for SPI DataFlash access
1939 - Fix NAND flash detection bug
1940
1941* Patch by Nicolas Lacressonniere, 24 Jun 2004:
1942 Add Support for Flash AT49BV6416 for AT91RM9200DK board
1943
wdenk0ac6f8b2004-07-09 23:27:13 +00001944* Patch by Jon Loeliger, 17 June 2004:
1945 Completion of the 8540ADS/8560ADS updates:
1946 Fix some PCI and Rapid I/O memory maps,
1947 Initialize both TSEC 1 and 2,
1948 Initialize SDRAM
1949 Update MAINTAINER for 85xx boards and README.mpc85xxads
1950
wdenk26238132004-07-09 22:51:01 +00001951* Patch by Yuli Barcohen, 16 Jun 2004:
1952 Remove obsolete AdderII port which was superseded by unified
1953 AdderII/Adder87x port
1954
1955* Patch by Ladislav Michl, 16 Jun 2004:
1956 Fix gcc-3.3.3 warnings for smc91111.c
1957
stroeseede13022004-07-02 14:38:26 +00001958* Patch by Stefan Roese, 02 Jul 2004:
1959 - Fix bug in 405 ethernet driver; allocated data not cleared!
1960 - Fix problem in 405 i2c driver; don't try to print without console!
1961
wdenk78953f22004-07-01 22:02:29 +00001962* Patch by Paul Ruhland, 11 Jun 2004:
1963 Remove debug code from 'board/lpd7a40x/flash.c'
1964
wdenke55ca7e2004-07-01 21:40:08 +00001965* Patch by Andrea Marson, 11 Jun 2004:
1966 Update for PPChameleon board:
1967 - support for SysClk @ 25MHz
1968 - support for Silicon Motion SM712 VGA controller
1969 - some clean ups
1970
wdenk93f6a672004-07-01 20:28:03 +00001971* Patches by Richard Woodruff, 10 Jun 2004:
1972 - fix problems with examples/stubs.c for GCC >= 3.4
1973 - fix problems with gd initialization
1974
wdenk39539882004-07-01 16:30:44 +00001975* Patch by Curt Brune, 17 May 2004:
1976 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
1977 - Add support for ESPD-Inc. EVB4510 Board
1978
1979* Patch by Marc Leeman, 11 May 2004:
1980 Fix for MPC8245 - reading PPC Memory from another device with the
1981 PPC as PCI target device corrupts data due to interenal hardware
1982 buffering.
1983
wdenke94d2cd2004-06-30 22:59:18 +00001984* Fix "cls" command when used with splash screen
1985
1986* Increase NFS download timeout (now 1 min - 10 sec is to short for a
1987 slow download of a big image)
1988
wdenkc3f4d172004-06-25 23:35:58 +00001989* Add "cls" function to MPC823 LCD driver so we can reinitialize the
1990 display even after showing a bitmap
1991
wdenk49822e22004-06-19 21:19:10 +00001992* Patch by Josef Wagner, 04 Jun 2004:
1993 - DDR Ram support for PM520 (MPC5200)
1994 - support for different flash types (PM520)
1995 - USB / IDE / CF-Card / DiskOnChip support for PM520
1996 - 8 bit boot rom support for PM520/CE520
1997 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
1998 - I2C and RTC support for CPC45
1999 - support of new flash type (28F160C3T) for CPC45
2000
wdenk46a414d2004-06-17 18:50:45 +00002001* Fix flash parameters passed to Linux for PPChameleon board
2002
2003* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
2004
wdenkf832d8a2004-06-10 21:55:33 +00002005* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +00002006 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +00002007 LH7A404 register macros.
2008
2009* Patch by Matthew McClintock, 10 Jun 2004:
2010 Modify code to select correct serial clock on Sandpoint8245
2011
wdenkb54d32b2004-06-10 21:34:36 +00002012* Patch by Robert Schwebel, 10 Jun 2004:
2013 Add support for Intel K3 strata flash.
2014
2015* Patch by Thomas Brand, 10 Jun 2004:
2016 Fix "loads" command on DK1S10 board
2017
wdenk2d24a3a2004-06-09 21:50:45 +00002018* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +00002019 Add support for 8MB flash SIMM and JFFS2 file system on
2020 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
2021
2022* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +00002023 Add support for Analogue&Micro Adder87x and the older AdderII board.
2024
2025* Patch by Ming-Len Wu, 09 Jun 2004:
2026 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
2027
wdenke63c8ee2004-06-09 21:04:48 +00002028* Patch by Sam Song, 09 Jun 2004:
2029 - Add support for RPXlite_DW board
2030 - Update FLASH driver for 4*AM29DL323DB90VI
2031 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
2032
wdenk36c72872004-06-09 17:45:32 +00002033* Patch by Mark Jonas, 08 June 2004:
2034 - Make MPC5200 boards evaluate the SVR to print processor name and
2035 version in checkcpu() (cpu/mpc5xxx/cpu.c).
2036
2037* Patch by Kai-Uwe Bloem, 06 May 2004:
2038 Fix endianess problem in cramfs code
2039
wdenk4c0d4c32004-06-09 17:34:58 +00002040* Patch by Tom Armistead, 04 Jun 2004:
2041 Add support for MAX6900 RTC
2042
2043* Patches by Ladislav Michl, 03 Jun 2004:
2044 - fix cfi_flash.c on LE systems
2045 - let 'make mrproper' delete u-boot.img as well
2046 - turn printf into debug in cfi_flash.c
2047
wdenkca0e7742004-06-09 15:37:23 +00002048* Patch by Kurt Stremerch, 28 May 2004:
2049 Add support for Exys XSEngine board
2050
wdenk697037f2004-06-09 15:29:49 +00002051* Patch by Martin Krause, 27 May 2004:
2052 Fix a MPC5xxx I2C timing issue in i2c_probe().
2053
2054* Patch by Leif Lindholm, 27 May 2004:
2055 Fix board_init_f() for dbau1x00 board.
2056
wdenk3ff02c22004-06-09 15:25:53 +00002057* Patch by Imre Deak, 26 May 2004:
2058 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
2059 Set flash base accordingly, and decide whether to do or skip board
2060 specific setup steps.
2061
2062* Patch by Josef Baumgartner, 26 May 2004:
2063 Add missing define in include/asm-m68k/global_data.h
2064
wdenk70f05ac2004-06-09 15:24:18 +00002065* Patch by Josef Baumgartner, 25 May 2004:
2066 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
2067
2068* Patch by Paul Ruhland, 24 May 2004:
2069 fix SDRAM initialization for LPD7A400 board.
2070
wdenk13a56952004-06-09 14:58:14 +00002071* Patch by Jian Zhang, 20 May 2004:
2072 add support for environment in NAND flash
2073
wdenkc3c7f862004-06-09 14:47:54 +00002074* Patch by Yuli Barcohen, 20 May 2004:
2075 Add support for Interphase iSPAN boards.
2076
2077* Patches by Paul Ruhland, 17 May 2004:
2078 - Add I/O functions to the smc91111 ethernet driver to support the
2079 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +00002080 - Add support for the Logic Zoom LH7A40x based SDK board(s),
2081 specifically the LPD7A400.
2082
2083* Patches by Robert Schwebel, 15 May 2004:
2084 - call MAC address reading code also for SMSC91C111;
2085 - make SMSC91C111 timeout configurable, remove duplicate code
2086 - fix get_timer() for PXA
2087 - update doc/README.JFFS2
2088 - use "bootfile" env variable also for jffs2
2089
wdenkaa245092004-06-09 12:47:02 +00002090* Patch by Tolunay Orkun, 14 May 2004:
2091 Add support for Cogent CSB472 board (8MB Flash Rev)
2092
wdenkaa5590b2004-06-09 12:42:26 +00002093* Patch by Thomas Viehweger, 14 May 2004:
2094 - flash.h: more flash types added
2095 - immap_8260.h: some bits added (useful for RMII)
2096 - cmd_coninfo.c: typo corrected, printf -> puts
2097 - reduced size by replacing spaces with tab
2098
wdenk48abe7b2004-06-09 10:15:00 +00002099* Patch by Robert Schwebel, 13 May 2004:
2100 Add 'imgextract' command: extract one part of a multi file image.
2101
wdenk547b4cb2004-06-09 00:51:50 +00002102* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +00002103 Dynamically handle REV1 and REV2 MPC85xx parts.
2104 (Jon Loeliger, 10-May-2004).
2105 New consistent memory map and Local Access Window across MPC85xx line.
2106 New CCSRBAR at 0xE000_0000 now.
2107 Add RAPID I/O memory map.
2108 New memory map in README.MPC85xxads
2109 (Kumar Gala, 10-May-2004)
2110 Better board and CPU identification on MPC85xx boards at boot.
2111 (Jon Loeliger, 10-May-2004)
2112 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
2113 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
2114 (Jim Robertson, 10-May-2004)
2115 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
2116 Supports multiple PHYs.
2117 (Andy Fleming, 10-May-2004)
2118 Some README.MPC85xxads updates.
2119 (Kumar Gala, 10-May-2004)
2120 Copyright updates for "Freescale"
2121 (Andy Fleming, 10-May-2004)
2122
wdenk6bdd1372004-06-09 00:15:33 +00002123* Patch by Stephen Williams, 11 May 2004:
2124 Add flash support for ST M29W040B
2125 Reduce JSE specific flash.c to remove dead code.
2126
wdenk356a0d92004-06-09 00:10:59 +00002127* Patch by Markus Pietrek, 04 May 2004:
2128 Fix clear_bss code for ARM systems (all except s3c44b0 which
2129 doesn't clear BSS at all?)
2130
2131* Fix "ping" problem on INC-IP board. Strange problem:
2132 Sometimes the store word instruction hangs while writing to one of
2133 the Switch registers, but only if the next instruction is 16-byte
2134 aligned. Moving the instruction into a separate function somehow
2135 makes the problem go away.
2136
wdenk1eaeb582004-06-08 00:22:43 +00002137* Patch by Rishi Bhattacharya, 08 May 2004:
2138 Add support for TI OMAP5912 OSK Board
2139
2140* Patch by Sam Song May, 07 May 2004:
2141 Fix typo of UPM table for rmu board
2142
2143* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +00002144 - Intracom board update.
2145 - Add Codec POST.
2146
wdenkcea655a2004-06-06 23:53:59 +00002147* Add support for the second Ethernet interface for the 'PPChameleon'
2148 board.
2149
wdenka56bd922004-06-06 23:13:55 +00002150* Patch by Dave Peverley, 30 Apr 2004:
2151 Add support for OMAP730 Perseus2 Development board
2152
2153* Patch by Alan J. Luse, 29 Apr 2004:
2154 Fix flash chip-select (OR0) option register setting on FADS boards.
2155
2156* Patch by Alan J. Luse, 29 Apr 2004:
2157 Report MII network speed and duplex setting properly when
2158 auto-negotiate is not enabled.
2159
2160* Patch by Jarrett Redd, 29 Apr 2004:
2161 Fix hang on reset on Ocotea board due to flash in wrong mode.
2162
wdenk5ca26792004-06-06 22:11:41 +00002163* Patch by Dave Peverley, 29 Apr 2004:
2164 add MAC address detection to smc91111 driver
2165
2166* Patch by David Müller, 28 Apr 2004:
2167 fix typo in lib_arm/board.c
2168
wdenk17ea1172004-06-06 21:51:03 +00002169* Patch by Tolunay Orkun, 20 Apr 2004:
2170 - README update: add CONFIG_CSB272 and csb272_config
2171 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
2172 i2cfast environment variable
2173
wdenk11142572004-06-06 21:35:06 +00002174* Patch by Yuli Barcohen, 19 Apr 2004:
2175 - Rename DUET_ADS to MPC885ADS
2176 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
2177 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
2178 - Clean up FADS family port to use the new defines
2179
wdenk979bdbc2004-06-01 21:08:17 +00002180* Fix PCI support on CPC45 board
2181
wdenke4cc71a2004-05-19 21:33:14 +00002182* Patch by Scott McNutt, 25 Apr 2004:
2183 Add Nios GDB/JTAG Console support:
2184 - Add stubs to support gdb via JTAG.
2185 - Add support for console over JTAG.
2186 - Minor cleanup.
2187
wdenk10767cc2004-05-13 13:23:58 +00002188* Add support for CATcenter board (based on PPChameleon ME module)
2189
wdenk02b11f82004-05-12 22:54:36 +00002190* Patch by Klaus Heydeck, 12 May 2004:
2191 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
2192 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
2193 various changes to KUP4 board specific files
2194
wdenk6c1362c2004-05-12 22:18:31 +00002195* Fix minor network problem on MPC5200: need some delay between
2196 resetting the PHY and sending the first packet. Implemented in a
2197 "natural" way by invoking the PHY reset and initialization code
2198 only once after power on vs. each time the interface is brought up.
2199
wdenk9d9e2832004-05-11 21:53:55 +00002200* Add some limited support for low-speed devices to SL811 USB controller
2201 (at least "usb reset" now passes successfully and "usb info" displays
2202 correct information)
2203
wdenkbaac6072004-05-08 20:33:20 +00002204* Change init sequence for multiple network interfaces: initialize
2205 on-chip interfaces before external cards.
2206
wdenk32877d62004-05-05 19:44:41 +00002207* Fix memory leak in the NAND-specific JFFS2 code
2208
2209* Fix SL811 USB controller when attached to a USB hub
2210
wdenk62b4ac92004-05-05 08:31:53 +00002211* Fix config option spelling in PM520 config file
2212
2213* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
2214 patches by Pantelis Antoniou, 30 Mar 2004)
2215
wdenk2729af92004-05-03 20:45:30 +00002216* Fix minor NAND JFFS2 related issue
2217
2218* Fixes for SL811 USB controller:
2219 - implement workaround for broken memory stick
2220 - improve error handling
2221
2222* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
2223 cope with congested networks.
2224
2225======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00002226Changes for U-Boot 1.1.1:
2227======================================================================
wdenk507bbe32004-04-18 21:13:41 +00002228
wdenkfc1cfcd2004-04-25 15:41:35 +00002229* Patch by Travis Sawyer, 23 Apr 2004:
2230 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
2231 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00002232
2233* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00002234 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00002235
2236* Patch by Kshitij Gupta, 21 Apr 2004:
2237 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
2238
2239* Patch by Steven Scholz, 24 Feb 2004:
2240 Fix a bug in AT91RM9200 ethernet driver:
2241 The MII interface is now initialized before accessing the PHY.
2242
wdenkb9711de2004-04-25 13:18:40 +00002243* Patch by John Kerl, 19 Apr 2004:
2244 Use U-boot's miiphy.h for PHY register names, rather than
2245 introducing a new header file.
2246
2247* Update pci_ids.h from linux-2.4.26
2248
2249* Patch by Masami Komiya, 19 Apr 2004:
2250 Fix problem cause by VLAN function on little endian architecture
2251 without VLAN environment
2252
wdenke9132ea2004-04-24 23:23:30 +00002253* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00002254 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00002255 optimization of flash access timing based on the actual bus
2256 frequency.
2257
wdenk5cf91d62004-04-23 20:32:05 +00002258* Modify KUP4X board configuration to use SL811 driver for USB memory
2259 sticks (including FAT / VFAT filesystem support)
2260
2261* Add SL811 Host Controller Interface driver for USB
2262
2263* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
2264
2265* Patch by Pantelis Antoniou, 19 Apr 2004:
2266 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
2267 Minor patches for Intracom boards.
2268
2269* Patch by Christian Pell, 19 Apr 2004:
2270 cleanup support for CF/IDE on PCMCIA for PXA25X
2271
wdenke35745b2004-04-18 23:32:11 +00002272* Temporarily disabled John Kerl's extended MII command code because
2273 "miivals.h" is missing
2274
2275* Patches by Mark Jonas, 13 Apr 2004:
2276 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
2277 - Add sync instructions to IceCube SDRAM init code
2278 - Move SDRAM chip constants into seperate include files
2279 - Unify DDR and SDR initialization code
2280 - Unify all IceCube (Lite5xxx) target names
2281
wdenk24711112004-04-18 22:57:51 +00002282* Patch by John Kerl, 16 Apr 2004:
2283 Enable ranges in mii command, e.g. mii read 0-1f 0 or
2284 mii read 4-7 18-1a. Also add mii dump subcommand for
2285 pretty-printing standard regs 0-5.
2286
2287* Patch by Stephen Williams, 16 April 2004:
2288 fix typo in JSE.h; update MAINTAINERS
2289
wdenk498b8db2004-04-18 22:26:17 +00002290* Patch by Matthew S. McClintock, 14 Apr 2004:
2291 fix initdram function for utx8245 board
2292
2293* Patch by Markus Pietrek, 14 Apr 2004:
2294 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
2295
2296* Patch by Reinhard Meyer, 18 Apr 2004:
2297 provide the IDE Reset Function for EMK 5200 boards
2298
2299* Patch by Masami Komiya, 12 Apr 2004:
2300 fix pci_hose_write_config_{byte,word}_via_dword problems
2301
wdenka8bd82d2004-04-18 22:03:42 +00002302* Patch by Sangmoon Kim, 12 Apr 2004:
2303 Update max RAM size for debris board
2304
2305* Patch by Travis Sawyer, 08 Apr 2004:
2306 Add TLB entry for second DIMM slot on ocotea
2307
2308* Patch by Masami Komiya, 08 Apr 2004:
2309 add RTL8169 network driver
2310
wdenk7abf0c52004-04-18 21:45:42 +00002311* Patch by Dan Malek, 07 Apr 2004:
2312 - Add support for RPC/STx GP3, Motorola 8560 board
2313 - Update 85xx TSEC driver so it searches MII for first available PHY
2314 and uses that one.
2315 - Add functions to support console MII commands.
2316
2317* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00002318 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00002319 from board_init_f() to board_init_r()
2320
2321* Patch by Yasushi Shoji, 07 Apr 2004:
2322 Cleanup microblaze port
2323
2324* Patch by Sangmoon Kim, 07 Apr 2004:
2325 Add auto SDRAM module detection for Debris board
2326
wdenkd4326ac2004-04-18 21:17:30 +00002327* Patch by Rune Torgersen, 06 Apr 2004:
2328 - Fix some PCI problems on the MPC8266ADS board
2329 - Fix the location of some PCI entries in the immap structure
2330
wdenk507bbe32004-04-18 21:13:41 +00002331* Patch by Yasushi Shoji, 07 Apr 2004:
2332 - add support for microblaze processors
2333 - add support for AtmarkTechno "suzaku" board
2334
wdenk998eaae2004-04-18 19:43:36 +00002335* Configure PPChameleon board to use redundand environment in flash
2336
2337* Configure PPChameleon board to use JFFS2 NAND support.
2338
2339* Added support for JFFS2 filesystem (read-only) on top of NAND flash
2340
wdenk6e592382004-04-18 17:39:38 +00002341* Patch by Rune Torgersen, 16 Apr 2004:
2342 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00002343
wdenkc26e4542004-04-18 10:13:26 +00002344* Patches by Pantelis Antoniou, 16 Apr 2004:
2345 - add support for a new version of an Intracom board and fix
2346 various other things on others.
2347 - add verify support to the crc32 command (define
2348 CONFIG_CRC32_VERIFY to enable it)
2349 - fix FEC driver for MPC8xx systems:
2350 1. fix compilation problems for boards that use dynamic
2351 allocation of DPRAM
2352 2. shut down FEC after network transfers
2353 - HUSH parser fixes:
2354 1. A new test command was added. This is a simplified version of
2355 the one in the bourne shell.
2356 2. A new exit command was added which terminates the current
2357 executing script.
2358 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00002359 - Fix some compile problems;
2360 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00002361
wdenkea66bc82004-04-15 23:23:39 +00002362* Patch by George G. Davis, 02 Apr 2004:
2363 add support for Intel Assabet board
2364
wdenkdb01a2e2004-04-15 23:14:49 +00002365* Patch by Stephen Williams, 01 Apr 2004:
2366 Add support for Picture Elements JSE board
2367
2368* Patch by Christian Pell, 01 Apr 2004:
2369 Add CompactFlash support for PXA systems.
2370
wdenk04a85b32004-04-15 18:22:41 +00002371* Patches by Pantelis Antoniou, 30 Mar 2004:
2372 - add auto-complete support to the U-Boot CLI
2373 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00002374 - add support for the Epson 156x series of graphical displays
2375 (These displays are serial and not suitable for using a normal
2376 framebuffer console on them)
2377 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00002378 - improve and fix various things in the MPC8xx FEC driver:
2379 1. The new 87x and 88x series of processors have two FECs,
2380 and the new driver supports them both.
2381 2. Another change in the 87x/88x series is support for
2382 the RMII (Reduced MII) interface. However numerous
2383 changes are needed to make it work since the PHYs
2384 are connected to the same lines. That means that
2385 you have to address them correctly over the MII
2386 interface.
2387 3. We now correctly match the MII/RMII interface
2388 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00002389 - Fix problem when readingthe MII status register. Due to the
2390 internal design of many PHYs you have to read the register
2391 twice. The problem is more apparent in 10Mbit mode.
2392 - add new mode ".jffs2s" for reading from a NAND device: it just
2393 skips over bad blocks.
2394 - add networking support for VLANs (802.1q), and CDP (Cisco
2395 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00002396 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00002397
2398* Patch by Yuli Barcohen, 28 Mar 2004:
2399 - Add support for MPC8272 family including MPC8247/8248/8271/8272
2400 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
2401 - Change configuration method for MPC8260ADS family
2402
wdenkd716b122004-04-12 16:12:49 +00002403* add startup code to clear the BSS of standalone applications
2404
wdenk56b86bf2004-04-12 14:31:43 +00002405* Fix if / elif handling bug in HUSH shell
2406
2407======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00002408Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00002409======================================================================
2410
wdenk7e780362004-04-08 22:31:29 +00002411* Patch by Mark Jonas: Remove config.tmp files only when
2412 unconfiguring the board
2413
2414* Adapt RMU board for bigger flash memory
2415
wdenk0608e042004-03-25 19:29:38 +00002416* Patch by Klaus Heydeck, 13 Mar 2003:
2417 Add support for KUP4X Board
2418
wdenk518e2e12004-03-25 14:59:05 +00002419* Patch by Pavel Bartusek, 21 Mar 2004
2420 Add Reiserfs support
2421
2422* Patch by Hinko Kocevar, 20 Mar 2004
2423 - Add auto-release for SMSC LAN91c111 driver
2424 - Add save/restore of PTR and PNR regs as suggested in datasheet
2425
wdenk6fb6af62004-03-23 23:20:24 +00002426* Patch by Stephen Williams, 19 March 2004
2427 Increase speed of sector reads from SystemACE,
2428 shorten poll timeout and remove a useless reset
2429
2430* Patch by Tolunay Orkun, 19 Mar 2004:
2431 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
2432 (CONFIG_PHY_GIGE)
2433
2434* Patch by Brad Kemp, 18 Mar 2004:
2435 prevent machine checks during a PCI scan
2436
2437* Patch by Pierre Aubert, 18 Mar 2004:
2438 Fix string cleaning in IDE identification
2439
wdenkeeb1b772004-03-23 22:53:55 +00002440* Patch by Pierre Aubert, 18 Mar 2004:
2441 - Unify video mode handling for Chips & Technologies 69000 Video
2442 chip and Silicon Motion SMI 712/710/810 Video chip
2443 - Add selection of the video output (CRT or LCD) via 'videoout'
2444 environment variable for the Silicon Motion
2445 - README update
2446
2447* Patch by Pierre Aubert, 18 Mar 2004:
2448 include/common.h typo fix
2449
2450* Patches by Tolunay Orkun, 17 Mar 2004:
2451 - Add support for bd->bi_iic_fast[] initialization via environment
2452 variable "i2cfast" (CONFIG_I2CFAST)
2453 - Add "i2cfast" u-boot environment variable support for csb272
2454
wdenk27aa8182004-03-23 22:37:33 +00002455* Patch by Carl Riechers, 17 Mar 2004:
2456 Ignore '\0' characters in console input for use with telnet and
2457 telco pads.
2458
2459* Patch by Leon Kukovec, 17 Mar 2004:
2460 typo fix for strswab prototype #ifdef
2461
wdenk4b9206e2004-03-23 22:14:11 +00002462* Patches by Thomas Viehweger, 16 Mar 2004:
2463 - show PCI clock frequency on MPC8260 systems
2464 - add FCC_PSMR_RMII flag for HiP7 processors
2465 - in do_jffs2_fsload(), take load address from load_addr if not set
2466 explicit, update load_addr otherwise
2467 - replaced printf by putc/puts when no formatting is needed
2468 (smaller code size, faster execution)
2469
wdenk109c0e32004-03-23 21:43:07 +00002470* Patch by Phillippe Robin, 16 Mar 2004:
2471 avoid dereferencing NULL pointer in lib_arm/armlinux.c
2472
2473* Patch by Stephen Williams, 15 Mar 2004:
2474 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
2475
2476* Patch by Tolunay Orkun, 15 Mar 2004:
2477 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
2478
2479* Patch by Travis Sawyer, 15 Mar 2004:
2480 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
2481
wdenkefa329c2004-03-23 20:18:25 +00002482* Add start-up delay to make sure power has stabilized before
2483 attempting to switch on USB on SX1 board.
2484
2485* Patch by Josef Wagner, 18 Mar 2004:
2486 - Add support for MicroSys XM250 board (PXA255)
2487 - Add support for MicroSys PM828 board (MPC8280)
2488 - Add support for 32 MB Flash on PM825/826
2489 - new SDRAM refresh rate for PM825/PM826
2490 - added support for MicroSys PM520 (MPC5200)
2491 - replaced Query by Identify command in CPU86/flash.c
2492 to support 28F160F3B
2493
2494* Fix wrap around problem with udelay() on ARM920T
2495
2496* Add support for Macronix flash on TRAB board
2497
wdenk7d7ce412004-03-17 01:13:07 +00002498* Patch by Pierre Aubert, 15 Mar 2004:
2499 Fix buffer overflow in IDE identification
2500
2501* Fix power-off of LCD for out-of-band temperatures on LWMON board
2502
2503* Remove redundand #define in IceCube.h
2504
wdenkd9df1f42004-03-15 09:00:01 +00002505* Patch by Steven Scholz, 27 Feb 2004:
2506 - Adding get_ticks() and get_tbclk() for AT91RM9200
2507 - Many white space fixes in cpu/at91rm9200/interrupts.c
2508
2509* Patches by Steven Scholz, 20 Feb 2004:
2510 some cleanup in AT91RM9200 related code
2511
wdenk855a4962004-03-14 18:23:55 +00002512* Patches by Travis Sawyer, 12 Mar 2004:
2513 - Fix Gigabit Ethernet support for 440GX
2514 - Add Gigabit Ethernet Support to MII PHY utilities
2515
2516* Patch by Brad Kemp, 12 Mar 2004:
2517 Fixes for drivers/cfi_flash.c:
2518 - Better support for x8/x16 implementations
2519 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
2520 - Added defines for AMD command and address constants
2521
2522* Patch by Leon Kukovec, 12 Mar 2004:
2523 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00002524
wdenk855a4962004-03-14 18:23:55 +00002525* Patch by George G. Davis, 11 Mar 2004:
2526 Remove hard coded network settings in TI OMAP1610 H2
2527 default board config
2528
2529* Patch by George G. Davis, 11 Mar 2004:
2530 add support for ADS GraphicsClient+ board.
2531
wdenk7d7ce412004-03-17 01:13:07 +00002532* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00002533 - add bitmap command and splash screen support in cfb console
2534 - add [optional] origin in the bitmap display command
2535
2536* Patch by Travis Sawyer, 11 Mar 2004:
2537 Fix ocotea board early init interrupt setup.
2538
2539* Patch by Thomas Viehweger, 11 Mar 2004:
2540 Remove redundand code; add PCI-specific bits to include/mpc8260.h
2541
wdenkaaf224a2004-03-14 15:20:55 +00002542* Patch by Stephan Linz, 09 Mar 2004
2543 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
2544
2545* Patch by George G. Davis, 9 Mar 2004:
2546 fix recent build failure for SA1100 target
2547
2548* Patch by Travis Sawyer, 09 Mar 2004:
2549 Support native interrupt mode for the IBM440GX.
2550 Previously it was running in 440GP compatibility mode.
2551
wdenk3d3befa2004-03-14 15:06:13 +00002552* Patch by Philippe Robin, 09 Mar 2004:
2553 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
2554 Platform support.
2555
2556* Patch by Masami Komiya, 08 Mar 2004:
2557 Don't overwrite server IP address or boot file name
2558 when the boot server does not return values
2559
wdenk7d7ce412004-03-17 01:13:07 +00002560* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00002561 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
2562
wdenk4d13cba2004-03-14 14:09:05 +00002563* Patch by Tolunay Orkun, 5 Mar 2004:
2564 Fix early board initialization for Cogent CSB272 board
2565
2566* Patch by Ed Okerson, 3 Mar 2004:
2567 fix CFI flash writes for little endian systems
2568
2569* Patch by Reinhard Meyer, 01 Mar 2004:
2570 generalize USB and IDE support for MPC5200 with according
2571 changes to IceCube.h and TOP5200.h
2572 add Am29LV256 256 MBit FLASH support for TOP5200 boards
2573 add info about USB and IDE to README
2574
wdenkc3f9d492004-03-14 00:59:59 +00002575* Patch by Yuli Barcohen, 4 Mar 2004:
2576 Fix problems with GCC 3.3.x which changed handling of global
2577 variables explicitly initialized to zero (now in .bss instead of
2578 .data as before).
2579
2580* Patch by Leon Kukovec, 02 Mar 2004:
2581 add strswab() to fix IDE LBA capacity, firmware and model numbers
2582 on little endian machines
2583
2584* Patch by Masami Komiya, 02 Mar 2004:
2585 - Remove get_ticks() from NFS code
2586 - Add verification of RPC transaction ID
2587
2588* Patch by Pierre Aubert, 02 Mar 2004:
2589 cleanup for IDE and USB drivers for MPC5200
2590
2591* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00002592 Ocotea:
2593 - Add IBM PPC440GX Ref Platform support (Ocotea)
2594 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
2595 Adapted to U-Boot and 440GX port
2596 440gx_enet.c:
2597 - Add gracious handling of all Ethernet Pin Selections for 440GX
2598 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
2599 ppc440.h:
2600 - Add needed bit definitions
2601 - Fix formatting
2602
2603* Patch by Carl Riechers, 1 Mar 2004:
2604 Add PPC440GX prbdv0 divider to fix memory clock calculation.
2605
2606* Patch by Stephan Linz, 27 Feb 2004
2607 - avoid problems for targets without NFS download support
2608
wdenkc40b2952004-03-13 23:29:43 +00002609* Patch by Rune Torgersen, 27 Feb 2004:
2610 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
2611 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
2612 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
2613
2614* Patch by Masami Komiya, 27 Feb 2004:
2615 Fix rarpboot: add autoload by NFS
2616
2617* Patch by Dan Eisenhut, 26 Feb 2004:
2618 fix flash_write return value in saveenv
2619
2620* Patch by Stephan Linz, 11 Dec 2003
2621 expand config.mk to avoid trigraph warnings on NIOS
2622
2623* Rename "BMS2003" board into "HMI10"
2624
wdenk6629d2f2004-03-12 15:38:25 +00002625* SX1 patches: use "serial#" for USB serial #; use redundand environment
2626 storage; auto-set console on USB port (using preboot command)
2627
wdenk232c1502004-03-12 00:14:09 +00002628* Add support for SX1 mobile phone; add support for USB-based console
2629 (enable with "setenv stdout usbtty; setenv stdin usbtty")
2630
wdenk79d696f2004-03-11 22:46:36 +00002631* Fix LOWBOOT configuration for MPC5200 with DDR memory
2632
wdenkf8d813e2004-03-02 14:05:39 +00002633* Fix SDRAM timings for LITE5200 / IceCube board
2634
2635* Handle Auti-MDIX / connection status for INCA-IP
2636
2637* Fix USB problems when attempting to read 0 bytes
2638
wdenke7c85682004-02-27 08:21:54 +00002639* Patch by Travis Sawyer, 26 Feb 2004:
2640 Fix broken compile for XPEDITE1K target.
2641
2642* Patch by Stephan Linz, 26 Feb 2004:
2643 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00002644
wdenke7c85682004-02-27 08:21:54 +00002645* Patch by Stephen Williams, 26 Feb 2004:
2646 Break up SystemACE reads of large block counts
2647
wdenk132ba5f2004-02-27 08:20:54 +00002648* Patch by Pierre Aubert, 26 Feb 2004
2649 add IDE support for MPC5200
2650
2651* Patch by Masami Komiya, 26 Feb 2004:
2652 add autoload via NFS
2653
2654* Patch by Stephen Williams
2655 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
2656 elsewhere in the source.
2657
wdenk11dadd542004-02-27 00:07:27 +00002658* Patch by Steven Scholz, 25 Feb 2004:
2659 - Timeouts in FPGA code should be based on CFG_HZ
2660 - Minor cleanup in code for Altera FPGA ACEX1K
2661
2662* Patch by Steven Scholz, 25 Feb 2004:
2663 Changed "Directory Hierarchy" section in README
2664
2665* Patch by Masami Komiya, 25 Feb 2004:
2666 Reduce copy count in nfs_read_reply() of NFS code
2667
wdenk80885a92004-02-26 23:46:20 +00002668* Patch by Markus Pietrek, 24 Feb 2004:
2669 NS9750 DevBoard added
2670
wdenk132ba5f2004-02-27 08:20:54 +00002671* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00002672 add USB support for MPC5200
2673
2674* Patch by Steven Scholz, 24 Feb 2004:
2675 - fix MII commands to use values from last command
2676
2677* Patch by Torsten Demke, 24 Feb 2004:
2678 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2679
wdenk0c852a22004-02-26 23:01:04 +00002680* Patch by Rahul Shanbhag, 19 Feb 2004:
2681 Fixes for for OMAP1610 board:
2682 - shift some IRQ specific code to platform.S file
2683 - remove duplicatewatchdog reset code from start.S
2684
2685* Make Auto-MDIX Support configurable on INCA-IP board
2686
2687* Fix license for mkimage tool
2688
wdenka084f7d2004-02-24 22:33:21 +00002689* Patch by Masami Komiya, 24 Feb 2004:
2690 Update NetBootFileXferSize in NFS code
2691
2692* Patch by Scott McNutt, 24 Feb 2004:
2693 fix packet length in NFS code
2694
wdenkcbd8a352004-02-24 02:00:03 +00002695* Patch by Masami Komiy, 22 Feb 2004:
2696 Add support for NFS for file download
2697
wdenk074cff02004-02-24 00:16:43 +00002698* Patch by Andrea Scian, 17 Feb 2004:
2699 Add support for S3C44B0 processor and DAVE B2 board
2700
2701* Patch by Steven Scholz, 20 Feb 2004:
2702 - Add support for MII commands on AT91RM9200 boards
2703 - some cleanup in AT91RM9200 ethernet code
2704
wdenk028ab6b2004-02-23 23:54:43 +00002705* Patch by Peter Ryser, 20 Feb 2004:
2706 Add support for the Xilinx ML300 platform
2707
2708* Patch by Stephan Linz, 17 Feb 2004:
2709 Fix watchdog support for NIOS
2710
2711* Patch by Josh Fryman, 16 Feb 2004:
2712 Fix byte-swapping for cfi_flash.c for different bus widths
2713
2714* Patch by Jon Diekema, 14 Jeb 2004:
2715 Remove duplicate "FPGA Support" notes from the README file
2716
wdenk63e73c92004-02-23 22:22:28 +00002717* Patches by Reinhard Meyer, 14 Feb 2004:
2718 - update board/emk tree; use common flash driver
2719 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
2720 [adapted for other PPC CPUs -- wd]
2721 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
2722
2723* Patch by Jon Diekema, 13 Feb 2004:
2724 Call show_boot_progress() whenever POST "FAILED" is printed.
2725
2726* Patch by Nishant Kamat, 13 Feb 2004:
2727 Add support for TI OMAP1610 H2 Board
2728 Fixes for cpu/arm926ejs/interrupt.c
2729 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
2730 Fix for a timer bug in OMAP1610 Innovator
2731 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
2732
2733* Patches by Stephan Linz, 12 Feb 2004:
2734 - add support for NIOS timer with variable period preload counter value
2735 - prepare POST framework support for NIOS targets
2736
2737* Patch by Denis Peter, 11 Feb 2004:
2738 add POST support for the MIP405 board
2739
wdenkcd0a9de2004-02-23 20:48:38 +00002740* Patch by Laurent Mohin, 10 Feb 2004:
2741 Fix buffer overflow in common/usb.c
2742
2743* Patch by Tolunay Orkun, 10 Feb 2004:
2744 Add support for Cogent CSB272 board
2745
wdenk2d1a5372004-02-23 19:30:57 +00002746* Patch by Thomas Elste, 10 Feb 2004:
2747 Add support for NET+50 CPU and ModNET50 board
2748
2749* Patch by Sam Song, 10 Feb 2004:
2750 Fix typos in cfi_flash.c
2751
2752* Patch by Leon Kukovec, 10 Feb 2004
2753 Fixed long dir entry slot id calculation in get_vfatname
2754
2755* Patch by Robin Gilks, 10 Feb 2004:
2756 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
2757 !=, <>, <, >, <=, >=)
2758
wdenk3f85ce22004-02-23 16:11:30 +00002759* Fix problem with side effects in macros in include/usb.h
2760
2761* Patch by David Benson, 13 Nov 2003:
2762 bug 841358 - fix TFTP download size limit
2763
2764* Fixing bug 850768:
2765 improper flush_cache() in load_serial()
2766
2767* Fixing bug 834943:
2768 MPC8540 - missing volatile declarations
2769
2770* Patch by Stephen Williams, 09 Feb 2004:
2771 Add support for Xilinx SystemACE chip:
2772 - New files common/cmd_ace.c and include/systemace.h
2773 - Hook systemace support into cmd_fat and the partition manager
2774
2775* Patch by Travis Sawyer, 09 Feb 2004:
2776 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2777
wdenk3c74e322004-02-22 23:46:08 +00002778* Patch by Travis Sawyer, 09 Feb 2004:
2779 o 440GX:
2780 - Fix PCI Indirect access for type 1 config cycles with ppc440.
2781 - Add phymode for 440 enet
2782 - fix pci pre init
2783 o XPedite1K:
2784 - Change board_pre_init to board_early_init_f
2785 - Add user flash to bus controller setup
2786 - Fix pci pre init
2787 - Fix is_pci_host to check GPIO for monarch bit
2788 - Force xpedite1k to pci conventional mode (via #define option)
2789
2790* Patch by Brad Kemp, 4 Feb 2004:
2791 - handle the machine check that is generated during the PCI scans
2792 on 82xx processors.
2793 - define the registers used in the IMMR by the PCI subsystem.
2794
2795* Patch by Pierre Aubert, 03 Feb 2004:
2796 cpu/mpc5xxx/start.S: copy MBAR into SPR311
2797
2798* Patch by Jeff Angielski, 03 Feb 2004:
2799 Fix copy & paste error in cpu/mpc8260/pci.c
2800
2801* Patch by Reinhard Meyer, 24 Jan 2004:
2802 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
2803
wdenkcf56e112004-02-20 22:02:48 +00002804* Add Auto-MDIX support for INCA-IP
2805
wdenkbf9e3b32004-02-12 00:47:09 +00002806* Some code cleanup
2807
2808* Patch by Josef Baumgartner, 10 Feb 2004:
2809 Fixes for Coldfire port
2810
2811* Patch by Brad Kemp, 11 Feb 2004:
2812 Fix CFI flash driver problems
2813
wdenka2d18bb2004-02-11 21:35:18 +00002814* Make sure to use a bus clock divider of 2 only when running TQM8xxM
2815 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00002816
wdenka2d18bb2004-02-11 21:35:18 +00002817* Optimize flash programming speed for LWMON (by another 100% :-)
2818
wdenkcd37d9e2004-02-10 00:03:41 +00002819* Patch by Jian Zhang, 3 Feb 2004:
2820 - Changed the incorrect FAT12BUFSIZE
2821 - data_begin in fsdata can be negative. Changed it to be short.
2822
wdenkec4c5442004-02-09 23:12:24 +00002823* Patches by Stephan Linz, 30 Jan 2004:
2824 1: - board/altera/common/flash.c:flash_erase():
2825 o allow interrupts befor get_timer() call
2826 o check-up each erased sector and avoid unexpected timeouts
2827 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
2828 o enclose sevenseg_set() in cpp condition
2829 - remove the ASMI configuration for DK1S10_standard_32 (never present)
2830 - fix some typed in mistakes in the NIOS documentation
2831 2: - split DK1C20 configuration into several header files:
2832 o two new files for each NIOS CPU description
2833 o U-Boot related part is remaining in DK1C20.h
2834 3: - split DK1S10 configuration into several header files:
2835 o two new files for each NIOS CPU description
2836 o U-Boot related part is remaining in DK1S10.h
2837 4: - Add support for the Microtronix Linux Development Kit
2838 NIOS CPU configuration at the Altera Nios Development Kit,
2839 Stratix Edition (DK-1S10)
2840 5: - Add documentation for the Altera Nios Development Kit,
2841 Stratix Edition (DK-1S10)
2842 6: - Add support for the Nios Serial Peripharel Interface (SPI)
2843 (master only)
2844 7: - Add support for the common U-Boot SPI framework at
2845 RTC driver DS1306
2846
wdenkb98fff12004-02-09 20:51:26 +00002847* Patch by Rahul Shanbhag, 28 Jan 2004:
2848 Fix flash protection/locking handling for OMAP1610 innovator board.
2849
2850* Patch by Rolf Peukert, 28 Jan 2004:
2851 fix flash write problems on CSB226 board (write with 32 bit bus width)
2852
2853* Patches by Mark Jonas, 16 Jan 2004:
2854 - fix rounding error when calculating baudrates for MPC5200 PSCs
2855 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
2856 time which is not supported
2857
wdenk5653fc32004-02-08 22:55:38 +00002858* Patch by Yuli Barcohen, 26 Jan 2004:
2859 Allow bzip2 compression for small memory footprint boards
2860
2861* Patch by Brad Kemp, 21 Jan 2004:
2862 Add support for CFI flash driver for both the Intel and the AMD
2863 command sets.
2864
2865* Patch by Travis Sawyer, 20 Jan 2004:
2866 Fix pci bridge auto enumeration of sibling p2p bridges.
2867
2868* Patch by Tolunay Orkun, 12 Jan 2004:
2869 Add some delays as needed for Intel LXT971A PHY support
2870
2871* Patches by Stephan Linz, 09 Jan 2004:
2872 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
2873 - make DK1C20 board configuration related to ASMI conform to
2874 documentation
2875
wdenkf6e20fc2004-02-08 19:38:38 +00002876* Patch by Anders Larsen, 09 Jan 2004:
2877
2878 ARM memory layout fixes: the abort-stack is now set up in the
2879 correct RAM area, and the BSS is zeroed out as it should be.
2880
2881 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
2882 of the linker scripts are replaced by '__bss_start' and '_end',
2883 resp., which is a further step to eliminate unnecessary differences
2884 between the implementation of the CPU architectures.
2885
wdenkf4863a72004-02-07 01:27:10 +00002886* Patch by liang a lei, 9 Jan 2004:
2887 Fix Intel 28F128J3 ID in include/flash.h
2888
2889* Patch by Masami Komiya, 09 Jan 2004:
2890 add support for TB0229 board (NEC VR4131 MIPS processor)
2891
2892* Patch by Leon Kukovec, 12 Dec 2003:
2893 changed extern __inline__ into static __inline__ in
2894 include/linux/byteorder/swab.h
2895
wdenkba56f622004-02-06 23:19:44 +00002896* Patch by Travis Sawyer, 30 Dec 2003:
2897 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
2898 select MDI port based on enabled EMAC device.
2899 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
2900 base PrPMC board.
2901
wdenka6cccae2004-02-06 21:48:22 +00002902* Patch by Wolter Kamphuis, 15 Dec 2003:
2903 made CONFIG_SILENT_CONSOLE usable on all architectures
2904
2905* Disable date command on TQM866M - there is no RTC on MPC866
2906
wdenk75d1ea72004-01-31 20:06:54 +00002907* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
2908
wdenk68766092004-01-29 09:22:58 +00002909* Implement adaptive SDRAM timing configuration based on actual CPU
2910 clock frequency for INCA-IP; fix problem with board hanging when
2911 switching from 150MHz to 100MHz
2912
2913* Add PCMCIA CS support for BMS2003 board
2914
wdenkc178d3d2004-01-24 20:25:54 +00002915* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
2916 see doc/README.MPC866 for details;
2917 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
2918 calculate CPU clock frequency from PLL register values.
2919
2920* Add support for 128 MB RAM on TQM8xxL/M modules
2921
wdenkef978732004-01-21 20:46:28 +00002922* Fix PS/2 keyboard problem caused by statically initialized variable
2923 pointing to a location in flash
2924
2925* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
2926
wdenkc837dcb2004-01-20 23:12:12 +00002927* The PS/2 mux on the BMS2003 board needs 450 ms after power on
2928 before we can access it; add delay in case we are faster (with no
2929 CF card inserted)
2930
2931* Cleanup of some init functions
2932
2933* Make sure SCC Ethernet is always stopped by the time we boot Linux
2934 to avoid Linux crashes by early packets coming in.
2935
2936* Accelerate flash accesses on LWMON board by using buffered writes
2937
wdenkb0aef112004-01-18 18:21:54 +00002938* Fix typo in Makefile;
2939 fix problem with PARTNUM detection
2940
wdenk1c437712004-01-16 00:30:56 +00002941* Patch by Reinhard Meyer, 09 Jan 2004:
2942 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
2943
2944* Add support for IDE LED on BMS2003 board
2945 (exclusive with status LED!)
2946
2947* Add support for PS/2 keyboard (used with PS/2 multiplexor on
2948 BMS2003 board)
2949
2950* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
2951 Add common files for "emk" boards
2952
wdenkc83bf6a2004-01-06 22:38:14 +00002953* Add a common get_ram_size() function and modify the the
2954 board-specific files to invoke that common implementation.
2955
2956======================================================================
wdenkb34ff812004-01-06 11:13:56 +00002957Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00002958======================================================================
2959
wdenkb34ff812004-01-06 11:13:56 +00002960* Set default clock for INCA-IP to 150 MHz
2961
wdenka522fa02004-01-04 22:51:12 +00002962* Make BMS2003 use a separate config file to avoid #ifdef mess;
2963 add I2C support; add support for DS1337 RTC
2964
2965* Add CompactFlash support for BMS2003 board
2966
2967* Add support for status LED on BMS2003 board
2968
wdenk180d3f72004-01-04 16:28:35 +00002969* Patch by Scott McNutt, 02 Jan 2004:
2970 Add support for the Nios Active Serial Memory Interface (ASMI)
2971 on Cyclone devices
2972
2973* Patch by Andrea Marson, 16 Dec 2003:
2974 Add support for the PPChameleon ME and HI modules
2975
2976* Patch by Yuli Barcohen, 22 Dec 2003:
2977 Add support for Motorola DUET ADS board (MPC87x/88x)
2978
wdenkdd875c72004-01-03 21:24:46 +00002979* Patch by Robert Schwebel, 15 Dec 2003:
2980 add support for cramfs (uses JFFS2 command interface)
2981
wdenkc935d3b2004-01-03 19:43:48 +00002982* Patches by Stephan Linz, 11 Dec 2003:
2983 - more documentation for NIOS port
2984 - new struct nios_pio_t, struct nios_spi_t
2985 - Reconfiguration for NIOS Development Kit DK1C20:
2986 o move board related code from board/dk1c20
2987 to board/altera/dk1c20
2988 o create a new common source path board/altera/common
2989 and move generic flash access stuff into it
2990 o change/expand configuration file DK1C20.h
2991 - Add support for NIOS Development Kit DK1S10
2992 - Add status LED support for NIOS systems
2993 - Add dual 7-segment LED support for Altera NIOS DevKits
2994
wdenk3a473b22004-01-03 00:43:19 +00002995* Patch by Ronen Shitrit, 10 Dec 2003:
2996 Add support for the Marvell DB64360 / DB64460 development boards
2997
2998* Patch by Detlev Zundel, 10 Dec 2003:
2999 fix dependency problem in examples/Makefile
3000
wdenkb6e4c402004-01-02 16:05:07 +00003001* Patch by Denis Peter, 8 Dec 2003
3002 - add support for the PATI board (MPC555)
3003 - add SPI support for the MPC5xx
3004
3005* Patch by Anders Larsen, 08 Dec 2003:
3006 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
3007 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
3008 cleanup some redundand #defines
3009
wdenk63f34912004-01-02 15:01:32 +00003010* Patch by André Schwarz, 8 Dec 2003:
3011 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
3012 - TX and RX deskriptors must be quad-word aligned
3013 - does not work with only one TX deskriptor
3014 - standard reset method does not work
3015
3016* Patch by Masami Komiya, 08 Dec 2003:
3017 add RTL8139 ethernet driver
3018
3019* Patches by Ed Okerson, 07 Dec 2003:
3020 - fix ethernet for the AU1x00 processors in little-endian mode.
3021 - extend memsetup.S for the AU1x00 processors in BE and LE modes
3022
wdenkd4ca31c2004-01-02 14:00:00 +00003023* Minor code cleanup (coding style)
3024
3025* Patch by Reinhard Meyer, 30 Dec 2003:
3026 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
3027 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
3028 - turned debug print of PHY registers into a function (called in two places)
3029 - added support for EMK MPC5200 based modules
3030
3031* Fix MPC8xx PLPRCR_MFD_SHIFT typo
3032
3033* Add support for TQM866M modules
3034
3035* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
3036
3037* Fix a few compiler warnings
3038
wdenkc1896002003-12-28 11:44:59 +00003039* Patch by Reinhard Meyer, 28 Dec 2003:
3040 Add initial support for TOP5200 board
3041
wdenk7cb22f92003-12-27 19:24:54 +00003042* Make CPU clock on ICA-IP board controllable by a "cpuclk"
3043 environment variable which can set to "100", "133", or "150". The
3044 CPU clock will be configured accordingly upon next reboot. Other
3045 values are ignored. In case of an invalid or undefined "cpuclk"
3046 value, the compile-time default CPU clock speed will be used.
3047
3048* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
3049 window that is used to access the UART registers by the Linux driver)
3050
3051* Patch by Reinhard Meyer, 20 Dec 2003:
3052 Fix clock calculation for the MPC5200 for higher clock frequencies
3053 (above 2**32 / 10 = 429.5 MHz).
3054
3055* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
3056
wdenkb2001f22003-12-20 22:45:10 +00003057* Fix IceCube CLKIN configuration (it's 33.000000MHz)
3058
3059* Add new configuration for IceCube board with DDR memory
3060
3061* Update TRAB memory configurations
3062
wdenk5c745d22003-12-12 00:02:26 +00003063* Add JFFS2 support for INCA-IP board
3064
stroesed4f58f72003-12-09 15:04:55 +00003065* Patch by Bill Hargen, 09 Dec 2003:
3066 - BUBINGA405EP: changed flash driver to protect top sector containing
3067 first instruction.
3068 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
3069 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
3070 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
3071 - 405EP: added/fixed support for "reginfo" command.
3072 - 4xx: removed spurious MII error messages on "mii info" command.
3073
wdenk4e5ca3e2003-12-08 01:34:36 +00003074* Patch by Bernhard Kuhn, 28 Nov 2003:
3075 add support for Coldfire CPU
3076 add support for Motorola M5272C3 and M5282EVB boards
3077
wdenk9fd5e312003-12-07 23:55:12 +00003078* Patch by Pierre Aubert, 24 Nov 2003:
3079 - add a return value for the fpga command
3080 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
3081 is defined. If ide_preinit fails, ide_init is aborted.
3082 - fix an endianess problem in fat.h
3083
wdenk3bbc8992003-12-07 22:27:15 +00003084* Patch by Wolter Kamphuis, 05 Dec 2003:
3085 Add support for SNMC's QS850/QS823/QS860T boards
3086
wdenkb028f712003-12-07 21:39:28 +00003087* Patch by Yuli Barcohen, 3 Dec 2003:
3088 "revive" U-Boot support for old Motorola MPC860ADS board
3089
3090* Patch by Cam(ilo?), 03 Dec 2003:
3091 make examples build even with broken Montavista objcopy
3092
3093* Patch by Pavel Bartusek, 27 Nov 2003:
3094 fix conversion problem with "bootretry" evironment variable
3095
wdenkb4676a22003-12-07 19:24:00 +00003096* Patch by Andre Schwarz, 24 Nov 2003:
3097 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
3098
3099* Patch by Pavel Bartusek, 21 Nov 2003:
3100 set ZMII bridge speed on 440
3101
3102* Patch by Anders Larsen, 17 Nov 2003:
3103 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
3104
wdenka2663ea2003-12-07 18:32:37 +00003105* Patches by David Müller, 14 Nov 2003:
3106 - board/mpl/common/common_util.c
3107 * implement support for BZIP2 compressed images
3108 * various cleanups (printf -> puts, ...)
3109 - board/mpl/common/flash.c
3110 * report correct errors to upper layers
3111 * check the erase fail and VPP low bits in status reg
3112 - board/mpl/vcma9/cmd_vcma9.c
3113 - board/mpl/vcma9/flash.c
3114 * various cleanups (printf -> puts, ...)
3115 - common/cmd_usb.c
3116 * fix typo in comment
3117 - cpu/arm920t/usb_ohci.c
3118 * support for S3C2410 is missing in #if line
3119 - drivers/cs8900.c
3120 * reinit some registers in case of error (cable missing, ...)
3121 - fs/fat/fat.c
3122 * support for USB/MMC devices is missing in #if line
3123 - include/configs/MIP405.h
3124 - include/configs/PIP405.h
3125 * enable BZIP2 support
3126 * enlarge malloc space to 1MiB because of BZIP2 support
3127 - include/configs/VCMA9.h
3128 * enable BZIP2 support
3129 * enlarge malloc space to 1MiB because of BZIP2 support
3130 * enable USB support
3131 - lib_arm/armlinux.c
3132 * change calling convention of ARM Linux kernel as
3133 described on http://www.arm.linux.org.uk/developer/booting.php
3134
3135* Patch by Thomas Lange, 14 Nov 2003:
3136 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
3137 support all these AMD boards.
3138
3139* Patch by Thomas Lange, 14 Nov 2003:
3140 Workaround for mips au1x00 physical memory accesses (the au1x00
3141 uses a 36 bit bus internally and cannot access physical memory
3142 directly. Use the uncached SDRAM address instead of the physical
3143 one.)
3144
wdenkef5a9672003-12-07 00:46:27 +00003145* Patch by Xue Ligong (Joe), 13 Nov 2003:
3146 add Realtek 8019 ethernet driver
3147
3148* Patch by Yuli Barcohen, 13 Nov 2003:
3149 MPC826xADS/PQ2FADS cleanup
3150
3151* Patch by Anders Larsen, 12 Nov 2003:
3152 Update README to mark the PORTIO commands non-standard
3153
wdenk5779d8d2003-12-06 23:55:10 +00003154* Patch by Nicolas Lacressonnière, 12 Nov 2003:
3155 update for for Atmel AT91RM9200DK development kit:
3156 - support for environment variables in DataFlash
3157 - Atmel DataFlash AT45DB1282 support
3158
3159* Patch by Jeff Carr, 11 Nov 2003:
3160 add support for new version of 8270 processors
3161
3162* Patches by George G. Davis, 05 Nov 2003:
3163 - only pass the ARM linux initrd tag to the kernel when an initrd
3164 is actually present
3165 - update omap1510inn configuration file
3166
wdenk8bf3b002003-12-06 23:20:41 +00003167* Patches by Stephan Linz, 3 Nov 2003:
3168 - more endianess fixes for LAN91C111 driver
3169 - CFG_HZ configuration patch for NIOS Cyclone board
3170
3171* Patch by Stephan Linz, 28 Oct 2003:
3172 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
3173
3174* Patch by Steven Scholz, 20 Oct 2003:
3175 - make "mii info <addr>" show infor for PHY at "addr" only
3176 - Endian fix for miiphy_info()
3177
wdenka8c7c702003-12-06 19:49:23 +00003178* Patch by Gleb Natapov, 19 Sep 2003:
3179 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
3180
3181* Patch by Anders Larsen, 17 Sep 2003:
3182 Bring ARM memory layout in sync with the documentation:
3183 stack and malloc-heap are now located _below_ the U-Boot code
3184
wdenkfa1399e2003-12-06 11:20:01 +00003185* Accelerate booting on TRAB board: read and check autoupdate image
3186 headers first instead of always reading the whole images.
3187
wdenkb96619a2003-12-05 21:08:38 +00003188* Fix type in MPC5XXX code (pointed out by Victor Wren)
3189
wdenkaf6d1df2003-12-03 23:53:42 +00003190* Enabled password check on RMU board
3191
3192* Fix configuration problem with IceCube in LOWBOOT configuration:
3193 envrionment got embedded, corrupting the image layout.
3194
3195* Fix NEC display names (it's 6440 [for 640x480], not 6640).
3196
wdenkfd3103b2003-11-25 16:55:19 +00003197* Added BMS2003 board
3198 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
3199
wdenkb4757ce2003-11-17 21:45:27 +00003200* Fix flash driver for TRAB board (must use Unlock Bypass Reset
3201 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
3202 and CPLD
3203
wdenk5bb226e2003-11-17 21:14:37 +00003204* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
3205 recent tools
3206
3207* Add checksum verification to 'imls' command
3208
3209* Add bd_info fields needed for 4xx Linux I2C driver
3210
3211* Patch by Martin Krause, 4 Nov. 2003:
3212 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
3213
3214* Print used network interface when CONFIG_NET_MULTI is set
3215
wdenk5cf9da42003-11-07 13:42:26 +00003216* Patch by Bernhard Kuhn, 28 Oct 2003:
3217 Add low boot support for MPC5200
3218
3219* Fix problem with dual PCMCIA support (NSCU)
3220
3221* Fix MPC5200 I2C initialization function
3222
3223======================================================================
wdenka43278a2003-09-11 19:48:06 +00003224Changes for U-Boot 1.0.0:
3225======================================================================
3226
wdenkb13fb012003-10-30 21:49:38 +00003227* Fix parameter passing to standalone images with bootm command
3228
3229* Patch by Kyle Harris, 30 Oct 2003:
3230 Fix build errors for ixdp425 board
3231
3232* Patch by David M. Horn, 29 Oct 2003:
3233 Fixes to build under CYGWIN
3234
3235* Get IceCube MGT5100 working (again)
3236
wdenk5fa66df2003-10-29 23:18:55 +00003237* Fix problems in memory test on some boards (which was not
3238 non-destructive as intended)
3239
3240* Patch by Gary Jennejohn, 28 Oct 2003:
3241 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
3242 to prevent stack overflow on ARM systems
3243
wdenka0f2fe52003-10-28 09:14:21 +00003244* Patch by Stephan Linz, 28 Oct 2003:
3245 fix init sequence error for NIOS port
3246
3247* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
3248
3249* Add CONFIG_VERSION_VARIABLE to TRAB configuration
3250
wdenka57a4962003-10-26 22:52:58 +00003251* Patch by Xiao Xianghua, 23 Oct 2003:
3252 small patch for mpc85xx
3253
3254* Fix small problem in MPC5200 I2C driver
3255
3256* Fix FCC3 support on ATC board
3257
dzu8cb81432003-10-24 13:14:45 +00003258* Correct header printing for multi-image files in do_bootm()
3259
3260* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
3261
wdenk4654af22003-10-22 09:00:28 +00003262* Fix PCI problems on PPChameleon board
3263
wdenka3ad8e22003-10-19 23:22:11 +00003264* Patch by Steven Scholz, 18 Oct 2003:
3265 Fix AT91RM9200 ethernet driver
3266
3267* Patch by Nye Liu, 17 Oct 2003:
3268 Fix typo in include/mpc8xx.h
3269
3270* Patch by Richard Woodruff, 16 Oct 03:
3271 Fixes for cpu/arm925/interrupt.c
3272 - Initialize timestamp & lastdec vars.
3273 - fix timestamp overflows.
3274 - fix lastdec overflow.
3275 - smarter normalization to allow udelay() below 1ms to work.
3276
3277* Patch by Scott McNutt, 16 Oct
3278 add networking support for the Altera Nios Development Kit,
3279 Cyclone Edition (DK-1C20)
3280
3281* Patch by Jon Diekema, 14 Oct 2003:
3282 add hint about doc/README.silent to README file
3283
dzue7df0292003-10-19 21:43:26 +00003284* Add CompactFlash support for NSCU
3285
wdenkd7281f42003-10-19 22:30:08 +00003286* Fix PCI problems on PPChameleonEVB
3287
wdenk3d1e8a92003-10-16 12:53:35 +00003288* TRAB auto-update: Base decision if we have to strip the image
3289 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00003290 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00003291
wdenk42d1f032003-10-15 23:53:47 +00003292* Patches by Xianghua Xiao, 15 Oct 2003:
3293
3294 - Added Motorola CPU 8540/8560 support (cpu/85xx)
3295 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
3296 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
3297
3298* Fix flash timings on TRAB board
3299
wdenk2d5b5612003-10-14 19:43:55 +00003300* Make sure HUSH is initialized for running auto-update scripts
3301
3302* Make 5200 reset command _really_ reset the board, without running
3303 any other code after it
3304
3305* Fix errors with flash erase when range spans across banks
3306 that are mapped in reverse order
3307
3308* Fix flash mapping and display on P3G4 board
3309
3310* Patch by Kyle Harris, 15 Jul 2003:
3311 - add support for Intel IXP425 CPU
3312 - add support for IXDP425 eval board
3313
wdenkf72da342003-10-10 10:05:42 +00003314* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
3315 for more information
3316
wdenk5da627a2003-10-09 20:09:04 +00003317* Patch by Steven Scholz, 10 Oct 2003
3318 - Add support for Altera FPGA ACEX1K
3319
wdenk15647dc2003-10-09 19:00:25 +00003320* Patches by Thomas Lange, 09 Oct 2003:
3321 - fix cmd_ide.c for non ppc boards (read/write functions did not
3322 add ATA base address)
3323 - fix for shannon board
3324 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00003325 - Endian swap ATA identity for all big endian CPUs, not just PPC
3326 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
3327 args to linux
3328 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00003329
3330* Patch by Sangmoon Kim, 07 Oct 2003:
3331 add support for debris board
3332
wdenka0ff7f22003-10-09 13:16:55 +00003333* Patch by Martin Krause, 09 Oct 2003:
3334 Fixes for TRAB board
3335 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00003336 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00003337 udelay(); fix some timing problems with adc controller
3338 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
3339 modify commands: touch and buzzer
3340
3341* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
3342 (quick & dirty workaround for rogue pointer problem in get_vfatname());
3343 Use direct function calls for auto_update instead of hush commands
3344
wdenk4a551702003-10-08 23:26:14 +00003345* Patch by Scott McNutt, 04 Oct 2003:
3346 - add support for Altera Nios-32 CPU
3347 - add support for Nios Cyclone Development Kit (DK-1C20)
3348
3349* Patch by Steven Scholz, 29 Sep 2003:
3350 - A second parameter for bootm overwrites the load address for
3351 "Standalone Application" images.
3352 - bootm sets environment variable "filesize" to the resulting
3353 (uncompressed) data length for "Standalone Application" images
3354 when autostart is set to "no". Now you can do something like
3355 if bootm $fpgadata $some_free_ram ; then
3356 fpga load 0 $some_free_ram $filesize
3357 fi
3358
3359* Patch by Denis Peter, 25 Sept 2003:
3360 add support for the MIP405 Rev. C board
3361
wdenk54387ac2003-10-08 22:45:44 +00003362* Patch by Yuli Barcohen, 25 Sep 2003:
3363 add support for Zephyr Engineering ZPC.1900 board
3364
3365* Patch by Anders Larsen, 23 Sep 2003:
3366 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
3367 implemented for the x86 architecture)
3368
wdenkfc3e2162003-10-08 22:33:00 +00003369* Patch by Sangmoon Kim, 23 Sep 2003:
3370 fix pll_pci_to_mem_multiplier table for MPC8245
3371
3372* Patch by Anders Larsen, 22 Sep 2003:
3373 enable timed autoboot on PXA
3374
3375* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00003376 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
3377 returns correct libgcc file path
3378 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
3379 time on s3c24x0 systems
3380
3381* Patch by Jon Diekema, 19 Sep 2003:
3382 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
3383 link state to the fault LED.
3384 - In NetLoop, make the Fault LED reflect the link status. The link
3385 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00003386
wdenkef1464c2003-10-08 22:14:02 +00003387* Patch by Anders Larsen, 18 Sep 2003:
3388 allow mkimage to build and run on Cygwin-hosted systems
3389
3390* Patch by Frank Müller, 18 Sep 2003:
3391 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
3392 cpu/mpc8xx/fec.c
3393
3394* Patch by Pantelis Antoniou, 16 Sep 2003:
3395 add tool to compute fileds in the PLPRCR register for MPC86x
3396
wdenkd9a405a2003-10-07 20:01:55 +00003397* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
3398
wdenk147031a2003-10-07 10:33:38 +00003399* Fix build problems under FreeBSD
3400
wdenk887b3722003-10-06 22:00:45 +00003401* Add generic filesystem image type
3402
wdenkfbe4b5c2003-10-06 21:55:32 +00003403* Make fatload set filesize environment variable
3404
3405* enable basic / medium / high-end configurations for PPChameleonEVB
3406 board; fix NAND code
3407
3408* enable TFTP client code to specify to the server the desired
3409 timeout value (see RFC-2349)
3410
dzubb65a312003-09-30 15:22:12 +00003411* Improve SDRAM setup for TRAB board
3412
dzu88a1bfa2003-09-30 15:11:43 +00003413* Suppress all output with splashscreen configured only if "splashimage"
3414 is set
3415
dzucad07372003-09-30 14:36:51 +00003416* Fix problems with I2C support for mpc5200
3417
dzu8a42eac2003-09-29 21:55:54 +00003418* Adapt TRAB configuration and auto_update to new memory layout
3419
dzu91e940d2003-09-25 22:32:40 +00003420* Add configuration for wtk board
3421
dzu29127b62003-09-25 22:30:12 +00003422* Add support for the Sharp LQ065T9DR51U LCD display
3423
wdenk206c60c2003-09-18 10:02:25 +00003424* Patch by Rune Torgersen, 17 Sep 2003:
3425 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00003426 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00003427
3428* Patches by Jon Diekema, 17 Sep 2003:
3429 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
3430 env_common.c)
3431 - sbc8260 tweaks
3432 - adjust "help" output
3433
wdenk5f535fe2003-09-18 09:21:33 +00003434* Patches by Anders Larsen, 17 Sep 2003:
3435 - fix spelling errors
3436 - set GD_FLG_DEVINIT flag only after device function pointers
3437 are valid
3438 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
3439 writeable
3440 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
3441 - trigger watchdog while waiting in serial driver
3442
wdenkb0639ca2003-09-17 22:48:07 +00003443* Add auto-update code for TRAB board using USB memory sticks,
3444 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00003445
wdenkef709e92003-09-16 17:35:37 +00003446* disable MPC5200 bus pipelining as workaround for bus contention
3447
wdenk4aeb2512003-09-16 17:06:05 +00003448* Modify XLB arbiter priorities on MPC5200 so all devices use same
3449 priority; configure critical interrupts to be handled like external
3450 interrupts
3451
wdenkacf98e72003-09-16 11:39:10 +00003452* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
3453 go back to 66 MHz for stability
3454
wdenk78137c32003-09-15 18:00:00 +00003455* Patches by Jon Diekema, 15 Sep 2003:
3456 - add description for missing CFG_CMD_* entries in the README file
3457 - sacsng tweaks
3458
wdenk35656de2003-09-14 19:08:39 +00003459* Patch by Gleb Natapov, 14 Sep 2003:
3460 enable watchdog support for all MPC824x boards that have a watchdog
3461
3462* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
3463 "Non-octet Aligned Frame" errors we see at 100 Mbps
3464
3465* Patch by Sharad Gupta, 14 Sep 2003:
3466 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
3467
wdenk200f8c72003-09-13 19:13:29 +00003468* Patch by llandre, 11 Sep 2003:
3469 update configuration for PPChameleonEVB board
3470
wdenk531716e2003-09-13 19:01:12 +00003471* Patch by David Müller, 13 Sep 2003:
3472 various changes to VCMA9 board specific files
3473
3474* Add I2C support for MGT5100 / MPC5200
3475
wdenkb70e7a02003-09-12 20:09:09 +00003476* Patch by Rune Torgersen, 11 Sep 2003:
3477 Changed default memory option on MPC8266ADS to NOT be Page Based
3478 Interleave, since this doesn't work very well with the standard
3479 16MB DIMM
3480
3481* Patch by George G. Davis, 12 Sep 2003:
3482 fix Makefile settings for sk98 driver
3483
stroese68ce8952003-09-12 08:57:52 +00003484* Patch by Stefan Roese, 12 Sep 2003:
3485 - new boards added: DP405, HUB405, PLU405, VOH405
3486 - some esd boards updated
3487 - cpu/ppc4xx/sdram.c: disable memory controller before setting
3488 first values
3489 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
3490
wdenk4f7cb082003-09-11 23:06:34 +00003491* Patch by Martin Krause, 11 Sep 2003:
3492 add burn-in tests for TRAB board
3493
3494* Enable instruction cache on MPC5200 board
3495
wdenka43278a2003-09-11 19:48:06 +00003496* Patch by Denis Peter, 11 Sep 2003:
3497 - fix USB data pointer assignment for bulk only transfer.
3498 - prevent to display erased directories in FAT filesystem.
3499
3500* Change output format for NAND flash - make it look like for other
3501 memory, too
3502
3503======================================================================
wdenk149dded2003-09-10 18:20:28 +00003504Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00003505======================================================================
3506
dzu29127b62003-09-25 22:30:12 +00003507* Add I2C and RTC support for RMU board
3508
wdenk7205e402003-09-10 22:30:53 +00003509* Patches by Denis Peter, 9 Sep 2003:
3510 add FAT support for IDE, SCSI and USB
3511
3512* Patches by Gleb Natapov, 2 Sep 2003:
3513 - cleanup of POST code for unsupported architectures
3514 - MPC824x locks way0 of data cache for use as initial RAM;
3515 this patch unlocks it after relocation to RAM and invalidates
3516 the locked entries.
3517
3518* Patch by Gleb Natapov, 30 Aug 2003:
3519 new I2C driver for mpc107 bridge. Now works from flash.
3520
3521* Patch by Dave Ellis, 11 Aug 2003:
3522 - JFFS2: fix typo in common/cmd_jffs2.c
3523 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
3524 - JFFS2: remove node version 0 warning
3525 - JFFS2: accept JFFS2 PADDING nodes
3526 - SXNI855T: add AM29LV800 support
3527 - SXNI855T: move environment from EEPROM to flash
3528 - SXNI855T: boot from JFFS2 in NOR or NAND flash
3529
3530* Patch by Bill Hargen, 11 Aug 2003:
3531 fixes for I2C on MPC8240
3532 - fix i2c_write routine
3533 - fix iprobe command
3534 - eliminates use of global variables, plus dead code, cleanup.
3535
wdenk149dded2003-09-10 18:20:28 +00003536* Add support for USB Mass Storage Devices (BBB)
3537 (tested with USB memory sticks only)
3538
3539* Avoid flicker on TRAB's VFD
3540
wdenk7152b1d2003-09-05 23:19:14 +00003541* Add support for SK98xx driver
3542
3543* Add PCI support for SL8245 board
3544
3545* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
3546 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
3547 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
3548
3549* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
3550 to allow for more accurate baudrate settings
3551 (error now 0.7% at 115 kbps, instead of 3.5% before)
3552
3553* Patch by Andreas Mohr, 4 Sep 2003:
3554 Fix a lot of spelling errors
3555
wdenk12f34242003-09-02 22:48:03 +00003556* Add support for PPChameleon Eval Board
3557
3558* Add support for P3G4 board
3559
3560* Fix problem with MGT5100 FEC driver: add "early" MAC address
3561 initialization
3562
wdenk326428c2003-08-31 18:37:54 +00003563* Patch by Yuli Barcohen, 7 Aug 2003:
3564 check BCSR to detect if the board is configured in PCI mode
3565
wdenk149dded2003-09-10 18:20:28 +00003566======================================================================
3567Changes for U-Boot 0.4.7:
3568======================================================================
3569
wdenk0cb61d72003-08-30 00:05:50 +00003570* Patch by Raghu Krishnaprasad, 7 Aug 2003:
3571 add support for Adder II MPC852T module
3572
wdenk6f213472003-08-29 22:00:43 +00003573* Patch by George G. Davis, 19 Aug 2003:
3574 fix TI Innovator/OMAP1510 pin configs
3575
3576* Patches by Kshitij, 18 Aug 2003
3577 - add support for arm926ejs cpu core
3578 - add support for TI OMAP 1610 Innovator Board
3579
wdenkc29fdfc2003-08-29 20:57:53 +00003580* Patch by Yuli Barcohen, 14 Aug 2003:
3581 add support for bzip2 uncompression
3582
3583* Add GCC library to examples/Makefile so GCC utility functions will
3584 be resolved, too
3585
wdenkca75add2003-08-29 10:05:53 +00003586* Add I2C and RTC support for RMU board using software I2C driver
3587 (because of better response to iprobe command); fix problem with
3588 "reset" command
3589
stroese437ce072003-08-28 14:24:37 +00003590* Patch by Matthias Fuchs, 28 Aug 2003:
3591 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
3592 CONFIG_BOOTP_MAKS (see README).
3593
wdenkd94f92c2003-08-28 09:41:22 +00003594* Fix ICU862 environment problem
3595
3596* Fix RAM size detection for RMU board
3597
3598* Implement "reset" for MGT5100/MPC5200 systems
3599
3600======================================================================
3601Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00003602======================================================================
3603
wdenke0ac62d2003-08-17 18:55:18 +00003604* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
3605 allow selection of clock frequency as "make" target
3606
3607* Implement memory autosizing code for IceCube boards
3608
3609* Configure network port on INCA-IP for autonegotiation
3610
3611* Fix overflow problem in network timeout code
3612
3613* Patch by Richard Woodruff, 8 Aug 2003:
3614 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
3615
wdenkd94f92c2003-08-28 09:41:22 +00003616======================================================================
3617Changes for U-Boot 0.4.5:
3618======================================================================
3619
wdenkae3af052003-08-07 22:18:11 +00003620* Update for TQM board defaults:
3621 disable clocks_in_mhz, enable boot count limit
3622
dzu9374fa22003-08-07 15:04:48 +00003623* Removed tools/gdb from "make all" target. Added make target "gdbtools"
3624 in toplevel directory instead. Removed astest.c from tools/gdb because
3625 it is no longer relevant.
3626
wdenk96e48cf2003-08-05 18:22:44 +00003627* Fix PCI support for MPC5200 / IceCube Board
3628
wdenkbdccc4f2003-08-05 17:43:17 +00003629* Map ISP1362 USB OTG controller for NSCU board
3630
3631* Patch by Brad Parker, 02 Aug 2003:
3632 fix sc520_cdp problems
3633
3634* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
3635
3636* Allow erase command to cross flash bank boundaries
3637
wdenk1f4bb372003-07-27 00:21:01 +00003638* Patch by Scott McNutt, 21 Jul 2003:
3639 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
3640 Both LynxOS and BlueCat linux KDIs are supported.
3641
3642* Patch by Richard Woodruff, 25 Jul 2003:
3643 use more reliable reset for OMAP/925T
3644
3645* Patch by Nye Liu, 25 Jul 2003:
3646 fix typo in mpc8xx.h
3647
3648* Patch by Richard Woodruff, 24 Jul 2003:
3649 Fixes for cmd_nand.c:
3650 - Fixed null dereferece which could result in incorrect ECC values.
3651 - Added support for devices with no Ready/Busy signal hooked up.
3652 - Added OMAP1510 read/write protect handling.
3653 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
3654 for non-JFFS2.
3655 - Switched default ECC to be JFFS2.
3656
wdenk77846742003-07-26 08:08:08 +00003657* Allow crc32 to be used at address 0x000
3658
3659* Provide consistent interface to standalone applications to access
3660 the 'global_data' structure
3661 Provide a doc/README.standalone more useful to users/developers.
3662
3663* Make IceCube MGT5100 FEC driver work
3664
wdenk27b207f2003-07-24 23:38:38 +00003665* Implement new mechanism to export U-Boot's functions to standalone
3666 applications: instead of using (PPC-specific) system calls we now
3667 use a jump table; please see doc/README.standalone for details
3668
3669* Patch by Dave Westwood, 24 Jul 2003:
3670 added support for Unity OS (a proprietary OS)
3671
3672* Patch by Detlev Zundel, 23 Jul 2003:
3673 add "imls" command to print flash table of contents
3674
3675* Fix cold boot detection for log buffer reset
3676
3677* Return error for invalid length specifiers with "cp.X" etc.
3678
3679* Fix startup problem on MIPS
3680
3681* Allow for CONFIG_SPLASH_SCREEN even when no explicit
3682 bitmap support is configured
3683
3684* Patch by Bill Hargen, 18 Jul 2003:
3685 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
3686
3687* Patch by Denis Peter, 18 Jul 2003:
3688 - fix memory configuration for MIP405T
3689 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
3690
3691* Cleanup of TQM82xx configurations; use "official" board types
3692 to make selection easier.
3693
wdenk2535d602003-07-17 23:16:40 +00003694* Patch by Martin Krause, 17 Jul 2003:
3695 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
3696
3697* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00003698 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00003699
3700* Patch by Nye Liu, 16 July 2003:
3701 MPC860FADS fixes:
3702 - add MPC86xADS support (uses MPC86xADS.h)
3703 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
3704 o PLPRCR changes
3705 o BRG changes (EXTAL/XTAL restricted to 10MHz)
3706 o don't trust gclk() software measurement by default, depend on
3707 CONFIG_8xx_GCLK_FREQ
3708 - add DRAM SIMM not installed detection
3709 - use more "correct" SDRAM initialization sequence
3710 - allow different SDRAM sizes (8xxADS has 8M)
3711 - default DER is 0
3712 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
3713 - rename MAMR/MBMR defines to be more consistent. Should eventually
3714 be merged into MxMR to better reflect the PowerQUICC datasheet.
3715
3716* Patch by Yuli Barcohen, 16 Jul 2003:
3717 support new Motorola PQ2FADS-ZU evaluation board which replaced
3718 MPC8260ADS and MPC8266ADS
3719
3720======================================================================
wdenk945af8d2003-07-16 21:53:01 +00003721Changes for U-Boot 0.4.4:
3722======================================================================
3723
3724* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
3725
3726* Add support for MGT5100 and MPC5200 processors
3727
3728* Patch by Lutz Dennig, 15 Jul 2003:
3729 update for R360MPI board
3730
3731======================================================================
wdenk8564acf2003-07-14 22:13:32 +00003732Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00003733======================================================================
3734
wdenk2e5983d2003-07-15 20:04:06 +00003735* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00003736 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00003737 - added support for TI OMAP 1510 Innovator Board
3738
wdenk6dff5522003-07-15 07:45:49 +00003739* Patches by Martin Krause, 14 Jul 2003:
3740 - add I2C support for s3c2400 systems (trab board)
3741 - (re-) add "ping" to command table
3742
3743* Fix handling of "slow" POST routines
3744
wdenk8564acf2003-07-14 22:13:32 +00003745* Patches by Yuli Barcohen, 13 Jul 2003:
3746 - Correct flash and JFFS2 support for MPC8260ADS
3747 - fix PVR values and clock generation for PowerQUICC II family
3748 (8270/8275/8280)
3749
3750* Patch by Bernhard Kuhn, 08 Jul 2003:
3751 - add support for M68K targets
3752
3753* Patch by Ken Chou, 3 Jul:
3754 - Fix PCI config table for A3000
3755 - Fix iobase for natsemi.c
3756 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00003757
wdenk8564acf2003-07-14 22:13:32 +00003758* Allow to enable "slow" POST routines by key press on power-on
3759* Fix temperature dependend switching of LCD backlight on LWMON
3760* Tweak output format for LWMON
3761
stroese57029232003-07-11 08:23:12 +00003762* Patch by Stefan Roese, 11 Jul 2003:
3763 - Fix bug in CONFIG_VERSION_VARIABLE.
3764 - AR405 config updated.
3765 - OCRTC/ORSG: bsp command added.
3766 - ASH405 bsp update.
3767
wdenk8564acf2003-07-14 22:13:32 +00003768======================================================================
3769Changes for U-Boot 0.4.2:
3770======================================================================
3771
wdenkf12e5682003-07-07 20:07:54 +00003772* Add support for NSCU board
3773
3774* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
3775
3776* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
3777 mirror bit flash on TQM8xxM modules
3778
wdenk0d498392003-07-01 21:06:45 +00003779* Patch by Kenneth Johansson, 30 Jun 2003:
3780 get rid of MK_CMD_ENTRY macro; update doc/README.command
3781
wdenkb37c7e52003-06-30 16:24:52 +00003782* Patch by Seb James, 30 Jun 2003:
3783 Improve documentation of I2C configuration in README
3784
3785* Fix problems with previous log buffer "fixes"
3786
3787* Fix minor help text issues
3788
3789* "log append" did not append a newline
3790
3791======================================================================
wdenkb0fce992003-06-29 21:03:46 +00003792Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00003793======================================================================
3794
wdenkb0fce992003-06-29 21:03:46 +00003795* Fix some missing commands, cleanup header files
3796 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
3797
wdenk9d2b18a2003-06-28 23:11:04 +00003798* Rewrite command lookup and help command (fix problems with bubble
3799 sort when sorting command name list). Minor cleanup here and there.
3800
wdenkd1cbe852003-06-28 17:24:46 +00003801* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
3802 - Allow to call sysmon function interactively
3803 - PIC on LWMON board needs delay after power-on
3804 - Add missing RSR definitions for MPC8xx
3805 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00003806 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00003807 - Add support for SL8245 board
3808
wdenk8bde7f72003-06-27 21:31:46 +00003809* Code cleanup:
3810 - remove trailing white space, trailing empty lines, C++ comments, etc.
3811 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
3812
3813* Patches by Kenneth Johansson, 25 Jun 2003:
3814 - major rework of command structure
3815 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
3816
3817======================================================================
3818Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00003819======================================================================
3820
wdenk993cad92003-06-26 22:04:09 +00003821* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00003822 - csb226 configuration updated
3823 - credits for logodl port updated
3824 - innokom configuration updated
3825 - logodl tree update, still with coding style inconsistencies
3826 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00003827
3828* Patch by Pantelis Antoniou, 25 Jun 2003:
3829 update NetVia with V2 board support
3830
wdenkb783eda2003-06-25 22:26:29 +00003831* Header file cleanup for ARM
3832
3833* Patch by Murray Jensen, 24 Jun 2003:
3834 - make sure to use only U-boot provided header files
3835 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
3836
stroesea300d832003-06-24 14:32:24 +00003837* Patch by Stefan Roese, 24 Jun 2003:
3838 - Update esd ASH405 board files.
3839 - Update esd DASA_SIM config file.
3840 - Add ping command to some esd boards.
3841
wdenkcceb8712003-06-23 18:12:28 +00003842* Patch by Yuli Barcohen, 23 Jun 2003:
3843 Update for MPC8260ADS board
3844
3845* Patch by Murray Jensen, 23 Jun 2003:
3846 - cleanup of GCC 3.x compiler warnings
3847
wdenk3595ac42003-06-22 17:18:28 +00003848* Patch by Rune Torgersen, 4 Jun 2003:
3849 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00003850
wdenk3595ac42003-06-22 17:18:28 +00003851* Patch by Richard Woodruff, 19 June 03:
3852 - Enabled standard u-boot device abstraction for ARM
3853 - Enabled console device for ARM
3854 - Initilized bi_baudrate for ARM
3855
3856* Patch by Bill Hargen, 23 Apr 2003:
3857 fix byte order for 824x I2C addresses (write op)
3858
wdenk592c5ca2003-06-21 00:17:24 +00003859* Patch by Murray Jensen, 20 Jun 2003:
3860 - hymod update
3861 - cleanup (especially for gcc-3.x compilers)
3862
wdenk72755c72003-06-20 23:10:58 +00003863* Patch by Tom Guilliams, 20 Jun 2003:
3864 added CONFIG_750FX support for IBM 750FX processors
3865
wdenk03329902003-06-20 22:36:30 +00003866* Patch by Devin Crumb, 02 Apr 2003:
3867 Fix clock divider rounding problem in drivers/serial.c
3868
3869* Patch by Richard Woodruff, 19 June 03:
3870 - Fixed smc91c111 driver to sync with the u-boot environment
3871 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00003872 - Added eth_init error return check in NetLoop (net/net.c).
3873
wdenk03329902003-06-20 22:36:30 +00003874* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00003875 Added support for A3000 SBC board (Artis Microsystems Inc.)
3876
wdenk6dd652f2003-06-19 23:40:20 +00003877* Patches by Murray Jensen, 17 Jun 2003:
3878 - Hymod board database mods: add "who" field and new xilinx chip types
3879 - provide new "init_cmd_timeout()" function so code external to
3880 "common/main.c" can use the "reset_cmd_timeout()" function before
3881 entering the main loop
3882 - add DTT support for adm1021 (new file dtt/adm1021.c; config
3883 slightly different. see include/configs/hymod.h for an example
3884 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
3885 CFG_DTT_ADM1021 defined)
3886 - add new "eeprom_probe()" function which has similar args and
3887 behaves in a similar way to "eeprom_read()" etc.
3888 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
3889 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
3890 - gdbtools copyright update
3891 - ensure that set_msr() executes the "sync" and "isync" instructions
3892 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
3893 - 8260 I/O ports fix: Open Drain should be set last when configuring
3894 - add SIU IRQ defines for 8260
3895 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
3896 config.mk to allow board configurations to override the GNU
3897 linker script, selected via the LDSCRIPT, make variable, and to
3898 give an initial value to the OBJCFLAGS make variable
3899 - 8260 i2c enhancement:
3900 o correctly extends the timeout depending on the size of all
3901 queued messages for both transmit and receive
3902 o will not continue with receive if transmit times out
3903 o ensures that the error callback is done for all queued tx
3904 and rx messages
3905 o correctly detects both tx and rx timeouts, only delivers one to
3906 the callback, and does not overwrite an earlier error
3907 o logic in i2c_probe now correct
3908 - add "vprintf()" function so that "panic()" function can be
3909 technically correct
3910 - many Hymod board changes
3911
wdenk52f52c12003-06-19 23:04:19 +00003912* Patches by Robert Schwebel, 14 Jun 2003:
3913 - add support for Logotronic DL datalogger board
3914 - cleanup serial line after kermit binary download
3915 - add debugX macro (debug level support)
3916 - update mach-types.h to latest arm.linux.org.uk master list.
3917
wdenk48b42612003-06-19 23:01:32 +00003918* Patches by David Müller, 12 Jun 2003:
3919 - rewrite of the S3C24X0 register definitions stuff
3920 - "driver" for the built-in S3C24X0 RTC
3921
3922* Patches by Yuli Barcohen, 12 Jun 2003:
3923 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
3924 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
3925 configuration word supplied by FPGA on some MPC8260ADS boards
3926
3927* Patch by Pantelis Antoniou, 10 Jun 2003:
3928 Unify status LED interface
3929
wdenk15ef8a52003-06-18 20:22:24 +00003930* Add support for DS12887 RTC; add RTC support for ATC board
3931
wdenk2abbe072003-06-16 23:50:08 +00003932* Patch by Nicolas Lacressonniere, 11 Jun 2003:
3933 Modifications for Atmel AT91RM9200DK ARM920T based development kit
3934 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00003935 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00003936 - Add Flash detection on Atmel AT91RM9200DK
3937 (between Atmel AT49BV1614 and AT49BV1614A flashes)
3938 - Replace old Ethernet PHY layer functions
3939 - Change link address
3940
3941* Patch by Frank Smith, 9 Jun 2003:
3942 use CRIT_EXCEPTION for machine check on 4xx
3943
3944* Patch by Detlev Zundel, 13 Jun 2003:
3945 added implementation of the "carinfo" command in cmd_immap.c
3946
wdenk71f95112003-06-15 22:40:42 +00003947* Fix CONFIG_NET_MULTI support in include/net.h
3948
3949* Patches by Kyle Harris, 13 Mar 2003:
3950 - Add FAT partition support
3951 - Add command support for FAT
3952 - Add command support for MMC
3953 ----
3954 - Add Intel PXA support for video
3955 - Add Intel PXA support for MMC
3956 ----
3957 - Enable MMC and FAT for lubbock board
3958 - Other misc changes for lubbock board
3959
wdenk487778b2003-06-06 11:20:01 +00003960* Patch by Robert Schwebel, April 02, 2003:
3961 fix for SMSC91111 driver
3962
wdenka3ed3992003-06-05 19:37:36 +00003963* Patch by Vladimir Gurevich, 04 Jun 2003:
3964 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
3965
stroese08eaea92003-06-05 15:44:37 +00003966* Patch by Stefan Roese, 05 Jun 2003:
3967 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
3968 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
3969 data cache can be used even if the chip select is in use.
3970 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
3971 (see README for further description).
3972 - Changed config files of CONFIG_EEPRO100 boards to use the
3973 CFG_RX_ETH_BUFFER define.
3974
wdenk73a8b272003-06-05 19:27:42 +00003975* Add support for RMU board
3976
3977* Add support for TQM862L at 100/50 MHz
3978
3979* Patch by Pantelis Antoniou, 02 Jun 2003:
3980 major reconstruction of networking code;
3981 add "ping" support (outgoing only!)
3982
wdenkf3e0de62003-06-04 15:05:30 +00003983* Patch by Denis Peter, 04 June 2003:
3984 add support for the MIP405T board
3985
wdenk682011f2003-06-03 23:54:09 +00003986* Patches by Udi Finkelstein, 2 June 2003:
3987 - Added support for custom keyboards, initialized by defining a
3988 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
3989 - Added support for the RBC823 board.
3990 - cpu/mpc8xx/lcd.c now automatically calculates the
3991 Horizontal Pixel Count field.
3992
3993* Fix alignment problem in BOOTP (dhcp_leasetime option)
3994 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
3995
3996* Patch by Mark Rakes, 14 May 2003:
3997 add support for Intel e1000 gig cards.
3998
3999* Patch by Nye Liu, 3 Jun 2003:
4000 fix critical typo in MAMR definition (include/mpc8xx.h)
4001
4002* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
4003
4004* Patch by Klaus Heydeck, 2 Jun 2003
4005 Minor changes for KUP4K configuration
4006
wdenk7a8e9bed2003-05-31 18:35:21 +00004007* Patch by Marc Singer, 29 May 2003:
4008 Fixed rarp boot method for IA32 and other little-endian CPUs.
4009
4010* Patch by Marc Singer, 28 May 2003:
4011 Added port I/O commands.
4012
4013* Patch by Matthew McClintock, 28 May 2003
4014 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
4015 - minor patches for utx8245
4016
4017* Patch by Daniel Engström, 28 May 2003:
4018 x86 update
4019
4020* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
4021 add nand flash support to SXNI855T configuration
4022 fix/extend nand flash support:
4023 - fix 'nand erase' command so does not erase bad blocks
4024 - fix 'nand write' command so does not write to bad blocks
4025 - fix nand_probe() so handles no flash detected properly
4026 - add doc/README.nand
4027 - add .jffs2 and .oob options to nand read/write
4028 - add 'nand bad' command to list bad blocks
4029 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
4030 - make NAND read/write faster
4031
4032* Patch by Rune Torgersen, 23 May 2003:
4033 Update for MPC8266ADS board
4034
wdenk3b57fe02003-05-30 12:48:29 +00004035* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
4036 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
4037 _time_ (!) if the environment is embedded within the U-Boot image,
4038 or in a separate flash sector.
4039
4040* Cleanup CFG_DER #defines in config files (wd maintained only)
4041
wdenkf07771c2003-05-28 08:06:31 +00004042* Fix data abort exception handling for arm920t CPU
4043
4044* Fix alignment problems with flash driver for TRAB board
4045
4046* Patch by Donald White, 21 May 2003:
4047 fix calculation of base address in pci_hose_config_device()
4048
4049* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
4050 execute "cmd2", even if "cmd1" fails. Note that this is different
4051 to "run var1 var2" where the contents of "var2" will NOT be
4052 executed when a command in "var1" fails.
4053
wdenk38b99262003-05-23 23:18:21 +00004054* Add zero-copy ramdisk support (requires corresponding kernel support!)
4055
wdenk4c3b21a2003-05-23 12:36:20 +00004056* Patch by Kyle Harris, 20 May 2003:
4057 In preparation for an ixp port, rename cpu/xscale and arch-xscale
4058 into cpu/pxa and arch-pxa.
4059
stroesed9ff6e82003-05-23 11:49:24 +00004060* Patch by Stefan Roese, 23 May 2003:
4061 - IBM PPC405EP port added.
4062 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
4063 UART0) is used as default U-Boot console. PPC4xx only!
4064 - esd ASH405 board added (PPC405EP based).
4065 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
4066 - esd CPCI405AB board added.
4067 - esd PMC405 board added.
4068 - Update of some esd boards.
4069
wdenk33149b82003-05-23 11:38:58 +00004070* Patch by Denis Peter, 19 Mai 2003:
4071 add support for the MIP405-3 board
4072
wdenk5d232d02003-05-22 22:52:13 +00004073* Patch by Dave Ellis, 22 May 2003:
4074 Fix problem with only partially cleared .bss segment
4075
4076* Patch by Rune Torgersen, 12 May 2003:
4077 get PCI to work on a MPC8266ADS board; incorporate change to
4078 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
4079
4080* Patch by Nye Liu, 1 May 2003:
4081 minor patches for the FADS8xx
4082
4083* Patch by Thomas Schäfer, 28 Apr 2003:
4084 Fix SPD handling for 256 ECC DIMM on Walnut
4085
wdenkc8c3a8b2003-05-21 20:26:20 +00004086* Add support for arbitrary bitmaps for TRAB's VFD command;
4087 allow to pass boot bitmap addresses in environment variables;
4088 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00004089
4090* Patch by Christian Geißinger, 19 May 2002:
4091 On TRAB: wait until the dummy byte has been completely sent
4092
wdenk7f70e852003-05-20 14:25:27 +00004093* Patch by David Updegraff, 22 Apr 2003:
4094 update for CrayL1 board
4095
4096* Patch by Pantelis Antoniou, 21 Apr 2003:
4097 add boot support for ARTOS (a proprietary OS)
4098
4099* Patch by Steven Scholz, 11 Apr 2003:
4100 Add support for RTC DS1338
4101
4102* Patch by Rod Boyce, 24 Jan 2003:
4103 Fix counting of extended partitions in diskboot command
4104
wdenk59de2ed2003-05-20 10:58:04 +00004105* Patch by Christophe Lindheimer, 20 May 2003:
4106 allow the use of CFG_LOADS when CFG_NO_FLASH is set
4107
wdenk86d82762003-05-20 10:39:44 +00004108* Fix SDRAM timing on Purple board
4109
wdenk66fd3d12003-05-18 11:30:09 +00004110* Add support for CompactFlash on ATC board
4111 (includes support for Intel 82365 and compatible PC Card controllers,
4112 and Yenta-compatible PCI-to-CardBus controllers)
4113
wdenk45219c42003-05-12 21:50:16 +00004114* Patch by Mathijs Haarman, 08 May 2003:
4115 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
4116
wdenk9c62cc52003-05-03 23:33:47 +00004117* Fix problem with usage of "true" (undefined in current versions of bfd.h)
4118
wdenk7aa78612003-05-03 15:50:43 +00004119* Add support for Promess ATC board
4120
4121* Patch by Keith Outwater, 28 Apr 2003:
4122 - Miscellaneous corrections and additions to GEN860T board specific code.
4123 - Added GEN860_SC variant to GEN860T.
4124 - Miscellaneous corrections to GEN860T documentation.
4125 - Correct duplicate entry in U-Boot CREDITS file.
4126 - Add GEN860T_SC entry in MAINTAINERS file.
4127 - Update CREDITS file with GEN860T_SC info.
4128
4129* Update Smiths Aerospace addresses in MAINTAINERS file
4130
4131* Fix error handling in hush's version of "run" command
4132
wdenk4532cb62003-04-27 22:52:51 +00004133* LWMON extensions:
4134 - Splashscreen support
4135 - modem support
4136 - sysmon support
4137 - temperature dependend enabling of LCD
4138
4139* Allow booting from old "PPCBoot" disk partitions
4140
4141* Add support for TQM8255 Board / MPC8255 CPU
4142
4143======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00004144Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00004145======================================================================
4146
wdenkd791b1d2003-04-20 14:04:18 +00004147* Make sure Block Lock Bits get cleared in R360MPI flash driver
4148
4149* MPC823 LCD driver: Fill color map backwards, to allow for steady
4150 display when Linux takes over
4151
4152* Patch by Erwin Rol, 27 Feb 2003:
4153 Add support for RTEMS (this time for real).
4154
4155* Add support for "bmp info" and "bmp display" commands to load
4156 bitmap images; this can be used (for example in a "preboot"
4157 command) to display a splash screen very quickly after poweron.
4158
4159* Add support for 133 MHz clock on INCA-IP board
4160
wdenk4a6fd342003-04-12 23:38:12 +00004161* Patch by Lutz Dennig, 10 Apr 2003:
4162 Update for R360MPI board
4163
4164* Add new meaning to "autostart" environment variable:
4165 If set to "no", a standalone image passed to the
4166 "bootm" command will be copied to the load address
4167 (and eventually uncompressed), but NOT be started.
4168 This can be used to load and uncompress arbitrary
4169 data.
4170
stroese69f8f8272003-04-10 13:30:28 +00004171* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00004172 Changed DHCP client to use IP address from server option field #54
4173 from the OFFER packet in the server option field #54 in the REQUEST
4174 packet. This fixes a problem using a Windows 2000 DHCP server,
4175 where the DHCP-server is not the TFTP-server.
4176
4177* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +00004178
wdenkd126bfb2003-04-10 11:18:18 +00004179* Add support for TQM862L modules
4180
4181======================================================================
wdenk60fbe252003-04-08 23:25:21 +00004182Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00004183======================================================================
4184
wdenk3e386912003-04-05 00:53:31 +00004185* Patch by Arun Dharankar, 4 Apr 2003:
4186 Add IDMA example code (tested on 8260 only)
4187
4188* Add support for Purple Board (MIPS64 5Kc)
4189
4190* Add support for MIPS64 5Kc CPUs
4191
4192* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
4193
4194* Patch by Denis Peter, 04 Apr 2003:
4195 - update MIP405-4 board
4196
stroese36c05a82003-04-04 16:55:30 +00004197* Patch by Stefan Roese, 4 Apr 2003:
4198 - U-Boot version environment variable "ver" added
4199 (CONFIG_VERSION_VARIABLE).
4200 - Changed PPC405GPr version from A to B.
4201 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
4202
wdenk3e386912003-04-05 00:53:31 +00004203* Patches by Denis Peter, 03 April 2003:
4204 - fix PCI IRQs on MPL boards
4205 - fix two more un-relocated pointer problems
4206
4207* Fix behaviour of "run" command:
4208 - print error message iv variable does not exist
4209 - terminate processing of arguments in case of error
4210
4211* Patches by Peter Figuli, 10 Mar 2003
4212 - Add support for BTUART on PXA platform
4213 - Add support for WEP EP250 (PXA) board
4214
4215* Fix flash problems on INCA-IP; add tool to allow bruning images to
4216 flash using a BDI2000
4217
4218* Implement fix for I2C Edge Conditions problem for all boards that
4219 use the bit-banging driver (common/soft_i2c.c)
4220
wdenk0db5bca2003-03-31 17:27:09 +00004221* Patch by Martin Winistoerfer, 23 Mar 2003
4222 - Add port to MPC555/556 microcontrollers
4223 - Add support for cmi customer board with
4224 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
4225
4226* Patch by Rick Bronson, 28 Mar 2003:
4227 - fix common/cmd_nand.c
4228
wdenk85ec0bc2003-03-31 16:34:49 +00004229* Patch by Arun Dharankar, 24 Mar 2003:
4230 - add threads / scheduler example code
4231
4232* Add patches by Robert Schwebel, 31 Mar 2003:
4233 - add ctrl-c support for kermit download
4234 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00004235 - csb226 board: bring in sync with innokom/memsetup.S
4236 - csb226 board: fix MDREFR handling
4237 - misc doc fixes / extensions
4238 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
4239 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00004240
stroese36c05a82003-04-04 16:55:30 +00004241* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00004242
wdenk506f0442003-03-28 14:40:36 +00004243* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
4244 - fix SRAM and SDRAM memory sizing
4245 - add status LED support
4246 - add MAC address for second (SCC1) ethernet port
4247
4248* Update default environment for TQM8260 board
4249
wdenkdc7c9a12003-03-26 06:55:25 +00004250* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00004251 - Add NAND flash support for reading, writing, and erasing NAND
4252 flash (certain forms of which are called SmartMedia).
4253 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00004254
4255* Patches by Robert Schwebel, 19 Mar 2003:
4256 - use arm-linux-gcc as default compiler for ARM
4257 - fix i2c fixup code
4258 - fix missing baudrate setting
4259 - added $loadaddr / CFG_LOAD_ADDR support to loadb
4260 - moved "ignoring trailing characters" _before_ u-boot wants to
4261 print out diagnostics messages; removes bogus characters at the
4262 end of transmission
4263
4264* Patch by John Zhan, 18 Mar 2003:
4265 Add support for SinoVee Microsystems SC8xx boards
4266
4267* Patch by Rolf Offermanns, 21 Mar 2003:
4268 ported the dnp1110 related changes from the current armboot cvs to
4269 current u-boot cvs. smc91111 does not work. problem marked in
4270 smc91111.c, grep for "FIXME".
4271
4272* Patch by Brian Auld, 25 Mar 2003:
4273 Add support for STM flash chips on ebony board
4274
wdenk4d75a502003-03-25 16:50:56 +00004275* Add PCI support for MPC8250 Boards (PM825 module)
4276
stroese44e5c5c2003-03-25 14:44:48 +00004277* Patch by Stefan Roese, 25 Mar 2003:
4278 - PCI405 update.
4279
stroese5d5d44e2003-03-20 15:32:59 +00004280* Patch by Stefan Roese, 20 Mar 2003:
4281 - CPCI4052 update (support for revision 3).
4282 - Set edge conditioning circuitry on PPC405GPr for compatibility
4283 to existing PPC405GP designs.
4284 - Clip udiv to 5 bits on PPC405 (serial.c).
4285
wdenkc0218802003-03-27 12:09:35 +00004286* Extend INCAIP board support:
4287 - add automatic RAM size detection
4288 - add "bdinfo" command
4289 - pass flash address and size to Linux kernel
4290 - switch to 150 MHz clock
4291
wdenk06d01db2003-03-14 20:47:52 +00004292* Avoid flicker on the TRAB's VFD by synchronizing the enable with
4293 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
4294 boards, version 153 for Rev. 200 boards).
4295
4296* Patch by Vladimir Gurevich, 12 Mar 2003:
4297 Fix relocation problem of statically initialized string pointers
4298 in common/cmd_pci.c
4299
4300* Patch by Kai-Uwe Blöm, 12 Mar 2003:
4301 Cleanup & bug fixes for JFFS2 code:
4302 - the memory mangement was broken. It caused havoc on malloc by
4303 writing beyond the block boundaries.
4304 - the length calculation for files was wrong, sometimes resulting
4305 in short file reads.
4306 - data copying now optionally takes fragment version numbers into
4307 account, to avoid copying from older data.
4308 See doc/README.JFFS2 for details.
4309
wdenk3bac3512003-03-12 10:41:04 +00004310* Patch by Josef Wagner, 12 Mar 2003:
4311 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
4312 - ETH05 and BEDBUG support for CU824
4313 - added support for MicroSys CPC45
4314 - new BOOTROM/FLASH0 and DOC base for PM826
4315
4316* Patch by Robert Schwebel, 12 Mar 2003:
4317 Fix the chpart command on innokom board
4318
4319* Name cleanup:
4320 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
4321 s/PPCBoot/U-Boot/ in some files
4322 s/pImage/uImage/ in some files
4323
4324* Patch by Detlev Zundel, 15 Jan 2003:
4325 Fix '' command line quoting
4326
4327* Patch by The LEOX team, 19 Jan 2003:
4328 - add support for the ELPT860 board
4329 - add support for Dallas ds164x RTC
4330
wdenk1cb8e982003-03-06 21:55:29 +00004331* Patches by David Müller, 31 Jan 2003:
4332 - minimal setup for CardBus bridges
4333 - add EEPROM read/write support in the CS8900 driver
4334 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00004335 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00004336
4337* Patch by Steven Scholz, 04 Feb 2003:
4338 add support for RTC DS1307
4339
4340* Patch by Reinhard Meyer, 5 Feb 2003:
4341 fix PLPRCR/SCCR init sequence on 8xx to allow for
4342 changes of EBDF by software
4343
4344* Patch by Vladimir Gurevich, 07 Feb 2003:
4345 "API-compatibility patch" for 4xx I2C driver
4346
4347* TRAB fixes / extensions:
4348 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00004349 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00004350 - make sure both buzzers are turned off (drive low level)
4351
wdenk47cd00f2003-03-06 13:39:27 +00004352* Patches by Robert Schwebel, 06 Mar 2003:
4353 - fix bug in BOOTP code (must use NetCopyIP)
4354 - update of CSB226 port
4355 - clear BSS segment on XScale
4356 - added support for i2c_init_board() function
4357 - update to the Innokom plattform
4358
4359* Extend support for redundand environments for configurations where
4360 environment size < sector size
4361
wdenkdb2f721f2003-03-06 00:58:30 +00004362* Patch by Rune Torgersen, 13 Feb 2003:
4363 Add support for Motorola MPC8266ADS board
4364
4365* Patch by Kyle Harris, 19 Feb 2003:
4366 patches for the Intel lubbock board:
4367 memsetup.S - general cleanup (based on Robert's csb226 code)
4368 flash.c - overhaul, actually works now
4369 lubbock.c - fix init funcs to return proper value
4370
4371* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00004372 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00004373 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00004374 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00004375 - Takes function pointer to function for reading the spd_nvram. Usefull
4376 for faking data or hardcode a module without the nvram.
4377 - fix other user for above change
4378 - fix some comments.
4379
4380* Patches by Brian Waite, 26 Feb 2003:
4381 - fix port for evb64260 board
4382 - fix PCI for evb64260 board
4383 - fix PCI scan
4384
4385* Patch by Reinhard Meyer, 1 Mar 2003:
4386 Add support for EMK TOP860 Module
4387
4388* Patch by Yuli Barcohen, 02 Mar 2003:
4389 Add SPD EEPROM support for MPC8260ADS board
4390
wdenk43d96162003-03-06 00:02:04 +00004391* Patch by Robert Schwebel, 21 Jan 2003:
4392 - Add support for Innokom board
4393 - Don't complain if "install" fails
4394 - README cleanup (remove duplicated lines)
4395 - Update PXA header files
4396
4397* Add documentation for existing POST code (doc/README.POST)
4398
4399* Patch by Laudney Ren, 15 Jan 2003:
4400 Fix handling of redundand environment in "tools/envcrc.c"
4401
4402* Patch by Detlev Zundel, 28 Feb 2003:
4403 Add bedbug support for 824x systems
4404
4405* Add support for 16 MB flash configuration of TRAB board
4406
4407* Patch by Erwin Rol, 27 Feb 2003:
4408 Add support for RTEMS
4409
4410* Add image information to README
4411
stroese2a9e02e2003-02-18 11:30:24 +00004412* Patch by Stefan Roese, 18 Feb 2003:
4413 CPCIISER4 configuration updated.
4414
stroesed7787c62003-02-17 16:06:06 +00004415* Patch by Stefan Roese, 17 Feb 2003:
4416 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
4417
stroesead10dd92003-02-14 11:21:23 +00004418* Patch by Stefan Roese, 13 Feb 2003:
4419 Add "pcidelay" environment variable (in ms, enabled via
4420 CONFIG_PCI_BOOTDELAY).
4421 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
4422 RST# to respond to configuration cycles (33MHz -> 1s).
4423
wdenk43d96162003-03-06 00:02:04 +00004424* Fix dual PCMCIA slot support (when running with just one
4425 slot populated)
4426
4427* Add VFD type detection to trab board
4428
4429* extend drivers/cs8900.c driver to synchronize ethaddr environment
4430 variable with value in the EEPROM
4431
stroeseee1b3b52003-02-10 16:39:00 +00004432* Patch by Stefan Roese, 10 Feb 2003:
4433 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
4434
wdenkc0218802003-03-27 12:09:35 +00004435* Add support for MIPS32 4Kc CPUs
4436
4437* Add support for INCA-IP Board
4438
wdenk43d96162003-03-06 00:02:04 +00004439======================================================================
4440Changes for U-Boot 0.2.2:
4441======================================================================
4442
wdenkaacf9a42003-01-17 16:27:01 +00004443* Add dual ethernet support on PM826
4444
4445* Add support for LXT971 PHY on PM826
4446
4447* Patch by Tord Andersson, 16 Jan 2003:
4448 Fix flash sector count for TQM8xxL
4449
4450* Fix I2C EEPROM problem on ICU862 board (would only write the first
4451 16 bytes out of each 32 byte block)
4452
4453======================================================================
4454Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00004455======================================================================
4456
wdenk608c9142003-01-13 23:54:46 +00004457* Add support for V37 board
4458 (patch by Jón Benediktsson, 11 Dec 2002)
4459
wdenkd0fb80c2003-01-11 09:48:40 +00004460* Update baudrate in bd_info when it gets changed
4461
4462* Add watchdog trigger points while waiting for serial port
4463 (so far only 8xx -- needed on LWMON with 100ms watchdog)
4464
4465* Improve command line tool to access the U-Boot's environment
4466 (figuration of the utility, using a config file)
4467
wdenka25f8622003-01-02 23:57:29 +00004468* Add single quote support for (old) command line parser
4469
wdenk288b3d72002-12-20 23:42:25 +00004470* Switch LWMON board default config from FRAM to EEPROM;
4471 in POST, EEPROM shows up on 8 addresses
4472
4473======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00004474Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00004475======================================================================
4476
wdenk6aff3112002-12-17 01:51:00 +00004477* Use 1-byte-read instead of -write for iprobe() function
4478 Add i2c commands to PM826 config
4479
4480* extend I2C POST code: check for list on known addresses
4481
wdenk228f29a2002-12-08 09:53:23 +00004482* Improve log buffer code; use "loglevel" to decide which messages
4483 to log on the console, too (like in Linux); get rid of "logstart"
4484
4485* Add command line tool to access the U-Boot's environment
4486 (board-specific for TRAB now, to be fixed later)
4487
wdenk7c7a23b2002-12-07 00:20:59 +00004488* Patch by Hans-Joerg Frieden, 06 Dec 2002
4489 Fix misc problems with AmigaOne support
4490
4491* Patch by Chris Hallinan, 3 Dec 2002:
4492 minor cleanup to the MPC8245 EPIC driver
4493
4494* Patch by Pierre Aubert , 28 Nov 2002
4495 Add support for external (SIU) interrupts on MPC8xx
4496
4497* Patch by Pierre Aubert , 28 Nov 2002
4498 Fix nested syscalls bug in standalone applications
4499
4500* Patch by David Müller, 27 Nov 2002:
4501 fix output of "pciinfo" command for CardBus bridge devices.
4502
4503* Fix bug in TQM8260 board detection - boards got stuck when board ID
4504 was not readable
4505
wdenk1f53a412002-12-04 23:39:58 +00004506* Add LED indication for IDE activity on KUP4K board
4507
wdenka6c7ad22002-12-03 21:28:10 +00004508* Fix startup problems with VFD display on TRAB
4509
4510* Patch by Pierre Aubert, 20 Nov 2002
4511 Add driver for Epson SED13806 graphic controller.
4512 Add support for BMP logos in cfb_console driver.
4513
wdenkea909b72002-11-21 23:11:29 +00004514* Added support for both PCMCIA slots (at the same time!) on MPC8xx
4515
4516* Patch by Rod Boyce, 21 Nov 2002:
4517 fix PCMCIA on MBX8xx board
4518
4519* Patch by Pierre Aubert , 21 Nov 2002
4520 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
4521 bootmode word in DPRAM configurable
4522
wdenkb2184c32002-11-19 23:01:07 +00004523* Patch by Daniel Engström, 18 Nov 2002:
4524 Fixes for x86 port (mostly strings issues)
4525
4526* Patch by Ken Chou, 18 Nov 2002:
4527 Fix for natsemi NIC cards (DP83815)
4528
4529* Patch by Pierre Aubert, 19 Nov 2002:
4530 fix a bug for the MII configuration, and some warnings
4531
wdenkc7de8292002-11-19 11:04:11 +00004532* Patch by Thomas Frieden, 13 Nov 2002:
4533 Add code for AmigaOne board
4534 (preliminary merge to U-Boot, still WIP)
4535
4536* Patch by Jon Diekema, 12 Nov 2002:
4537 - Adding URL for IEEE OUI lookup
4538 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
4539 being defined.
4540 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
4541 root-on-nfs macros are designed to switch how the default boot
4542 method gets defined.
4543
wdenk2262cfe2002-11-18 00:14:45 +00004544* Patch by Daniel Engström, 13 Nov 2002:
4545 Add support for i386 architecture and AMD SC520 board
4546
4547* Patch by Pierre Aubert, 12 Nov 2002:
4548 Add support for DOS filesystem and booting from DOS floppy disk
4549
wdenk1d0350e2002-11-11 21:14:20 +00004550* Patch by Jim Sandoz, 07 Nov 2002:
4551 Increase number of network RX buffers (PKTBUFSRX in
4552 "include/net.h") for EEPRO100 based boards (especially SP8240)
4553 which showed "Receiver is not ready" errors when U-Boot was
4554 processing the receive buffers slower than the network controller
4555 was filling them.
4556
wdenkeb9401e2002-11-11 02:11:37 +00004557* Patch by Andreas Oberritter, 09 Nov 2002:
4558 Change behaviour of NetLoop(): return -1 for errors, filesize
4559 otherwise; return code 0 is valid an means no file loaded - in this
4560 case the environment still gets updated!
4561
4562* Patches by Jon Diekema, 9 Nov 2002:
4563 - improve ADC/DAC clocking on the SACSng board to align
4564 the failing edges of LRCLK and SCLK
4565 - sbc8260 configuration tweaks
4566 - add status LED support for 82xx systems
4567 - wire sspi/sspo commands into command handler; improved error
4568 handlering
4569 - add timestamp support and alternate memory test to the
4570 SACSng configuration
4571
4572* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00004573 Add "-n" to linker options to get rid of "Not enough room for
4574 program headers" problem
4575
4576* Patch by David Müller, 05 Nov 2002
4577 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
4578 so we can use an already existing name
4579
4580* Patch by Pierre Aubert, 05 Nov 2002
4581 Hardware relatied improvments in FDC boot code
4582
4583* Patch by Holger Schurig, 5 Nov 2002:
4584 Make the PXA really change it's frequency
4585
4586* Patch by Pierre Aubert, 05 Nov 2002
4587 Add support for slave serial Spartan 2 FPGAs
4588
4589* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
4590 drivers
4591
wdenk56f94be2002-11-05 16:35:14 +00004592* Add support for log buffer which can be passed to Linux kernel's
4593 syslog mechanism; used especially for POST results.
4594
4595* Patch by Klaus Heydeck, 31 Oct 2002:
4596 Add initial support for kup4k board
4597
wdenk384ae022002-11-05 00:17:55 +00004598* Patch by Robert Schwebel, 04 Nov 2002:
4599 - use watchdog to reset PXA250 systems
4600 - added progress callbacks to (some of the) ARM code
4601 - update for Cogent CSB226 board
4602
4603* Add support for FPS860 board
4604
wdenke95b61c2002-11-04 16:02:40 +00004605* Patch by Guillaume Alexandre,, 04 Nov 2002:
4606 Improve PCI access on 32-bits Compact PCI bus
4607
wdenk24ee89b2002-11-03 17:56:27 +00004608* Fix mdelay() on TRAB - this was still the debugging version with
4609 seconds instead of ms.
4610
4611* Patch by Robert Schwebel, 1 Nov 2002:
4612 XScale related cleanup (affects all ARM boards)
4613
4614* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00004615
4616======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00004617Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00004618======================================================================
4619
4620This is the initial version of "Das U-Boot", the Universal Boot Loader.
4621
4622It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
4623For information about the history of the project please see the
4624PPCBoot project page at http://sourceforge.net/projects/ppcboot
4625
4626======================================================================