blob: 3bb17eb78a4c744fdfc79340f206fd74bae9f3fa [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
wdenkd94f92c2003-08-28 09:41:22 +00002Changes for U-Boot 0.4.7:
3======================================================================
4
stroese437ce072003-08-28 14:24:37 +00005* Patch by Matthias Fuchs, 28 Aug 2003:
6 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
7 CONFIG_BOOTP_MAKS (see README).
8
wdenkd94f92c2003-08-28 09:41:22 +00009* Fix ICU862 environment problem
10
11* Fix RAM size detection for RMU board
12
13* Implement "reset" for MGT5100/MPC5200 systems
14
15======================================================================
16Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +000017======================================================================
18
wdenke0ac62d2003-08-17 18:55:18 +000019* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
20 allow selection of clock frequency as "make" target
21
22* Implement memory autosizing code for IceCube boards
23
24* Configure network port on INCA-IP for autonegotiation
25
26* Fix overflow problem in network timeout code
27
28* Patch by Richard Woodruff, 8 Aug 2003:
29 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
30
wdenkd94f92c2003-08-28 09:41:22 +000031======================================================================
32Changes for U-Boot 0.4.5:
33======================================================================
34
wdenkae3af052003-08-07 22:18:11 +000035* Update for TQM board defaults:
36 disable clocks_in_mhz, enable boot count limit
37
dzu9374fa22003-08-07 15:04:48 +000038* Removed tools/gdb from "make all" target. Added make target "gdbtools"
39 in toplevel directory instead. Removed astest.c from tools/gdb because
40 it is no longer relevant.
41
wdenk96e48cf2003-08-05 18:22:44 +000042* Fix PCI support for MPC5200 / IceCube Board
43
wdenkbdccc4f2003-08-05 17:43:17 +000044* Map ISP1362 USB OTG controller for NSCU board
45
46* Patch by Brad Parker, 02 Aug 2003:
47 fix sc520_cdp problems
48
49* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
50
51* Allow erase command to cross flash bank boundaries
52
wdenk1f4bb372003-07-27 00:21:01 +000053* Patch by Scott McNutt, 21 Jul 2003:
54 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
55 Both LynxOS and BlueCat linux KDIs are supported.
56
57* Patch by Richard Woodruff, 25 Jul 2003:
58 use more reliable reset for OMAP/925T
59
60* Patch by Nye Liu, 25 Jul 2003:
61 fix typo in mpc8xx.h
62
63* Patch by Richard Woodruff, 24 Jul 2003:
64 Fixes for cmd_nand.c:
65 - Fixed null dereferece which could result in incorrect ECC values.
66 - Added support for devices with no Ready/Busy signal hooked up.
67 - Added OMAP1510 read/write protect handling.
68 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
69 for non-JFFS2.
70 - Switched default ECC to be JFFS2.
71
wdenk77846742003-07-26 08:08:08 +000072* Allow crc32 to be used at address 0x000
73
74* Provide consistent interface to standalone applications to access
75 the 'global_data' structure
76 Provide a doc/README.standalone more useful to users/developers.
77
78* Make IceCube MGT5100 FEC driver work
79
wdenk27b207f2003-07-24 23:38:38 +000080* Implement new mechanism to export U-Boot's functions to standalone
81 applications: instead of using (PPC-specific) system calls we now
82 use a jump table; please see doc/README.standalone for details
83
84* Patch by Dave Westwood, 24 Jul 2003:
85 added support for Unity OS (a proprietary OS)
86
87* Patch by Detlev Zundel, 23 Jul 2003:
88 add "imls" command to print flash table of contents
89
90* Fix cold boot detection for log buffer reset
91
92* Return error for invalid length specifiers with "cp.X" etc.
93
94* Fix startup problem on MIPS
95
96* Allow for CONFIG_SPLASH_SCREEN even when no explicit
97 bitmap support is configured
98
99* Patch by Bill Hargen, 18 Jul 2003:
100 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
101
102* Patch by Denis Peter, 18 Jul 2003:
103 - fix memory configuration for MIP405T
104 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
105
106* Cleanup of TQM82xx configurations; use "official" board types
107 to make selection easier.
108
wdenk2535d602003-07-17 23:16:40 +0000109* Patch by Martin Krause, 17 Jul 2003:
110 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
111
112* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +0000113 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +0000114
115* Patch by Nye Liu, 16 July 2003:
116 MPC860FADS fixes:
117 - add MPC86xADS support (uses MPC86xADS.h)
118 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
119 o PLPRCR changes
120 o BRG changes (EXTAL/XTAL restricted to 10MHz)
121 o don't trust gclk() software measurement by default, depend on
122 CONFIG_8xx_GCLK_FREQ
123 - add DRAM SIMM not installed detection
124 - use more "correct" SDRAM initialization sequence
125 - allow different SDRAM sizes (8xxADS has 8M)
126 - default DER is 0
127 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
128 - rename MAMR/MBMR defines to be more consistent. Should eventually
129 be merged into MxMR to better reflect the PowerQUICC datasheet.
130
131* Patch by Yuli Barcohen, 16 Jul 2003:
132 support new Motorola PQ2FADS-ZU evaluation board which replaced
133 MPC8260ADS and MPC8266ADS
134
135======================================================================
wdenk945af8d2003-07-16 21:53:01 +0000136Changes for U-Boot 0.4.4:
137======================================================================
138
139* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
140
141* Add support for MGT5100 and MPC5200 processors
142
143* Patch by Lutz Dennig, 15 Jul 2003:
144 update for R360MPI board
145
146======================================================================
wdenk8564acf2003-07-14 22:13:32 +0000147Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +0000148======================================================================
149
wdenk2e5983d2003-07-15 20:04:06 +0000150* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +0000151 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +0000152 - added support for TI OMAP 1510 Innovator Board
153
wdenk6dff5522003-07-15 07:45:49 +0000154* Patches by Martin Krause, 14 Jul 2003:
155 - add I2C support for s3c2400 systems (trab board)
156 - (re-) add "ping" to command table
157
158* Fix handling of "slow" POST routines
159
wdenk8564acf2003-07-14 22:13:32 +0000160* Patches by Yuli Barcohen, 13 Jul 2003:
161 - Correct flash and JFFS2 support for MPC8260ADS
162 - fix PVR values and clock generation for PowerQUICC II family
163 (8270/8275/8280)
164
165* Patch by Bernhard Kuhn, 08 Jul 2003:
166 - add support for M68K targets
167
168* Patch by Ken Chou, 3 Jul:
169 - Fix PCI config table for A3000
170 - Fix iobase for natsemi.c
171 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +0000172
wdenk8564acf2003-07-14 22:13:32 +0000173* Allow to enable "slow" POST routines by key press on power-on
174* Fix temperature dependend switching of LCD backlight on LWMON
175* Tweak output format for LWMON
176
stroese57029232003-07-11 08:23:12 +0000177* Patch by Stefan Roese, 11 Jul 2003:
178 - Fix bug in CONFIG_VERSION_VARIABLE.
179 - AR405 config updated.
180 - OCRTC/ORSG: bsp command added.
181 - ASH405 bsp update.
182
wdenk8564acf2003-07-14 22:13:32 +0000183======================================================================
184Changes for U-Boot 0.4.2:
185======================================================================
186
wdenkf12e5682003-07-07 20:07:54 +0000187* Add support for NSCU board
188
189* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
190
191* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
192 mirror bit flash on TQM8xxM modules
193
wdenk0d498392003-07-01 21:06:45 +0000194* Patch by Kenneth Johansson, 30 Jun 2003:
195 get rid of MK_CMD_ENTRY macro; update doc/README.command
196
wdenkb37c7e52003-06-30 16:24:52 +0000197* Patch by Seb James, 30 Jun 2003:
198 Improve documentation of I2C configuration in README
199
200* Fix problems with previous log buffer "fixes"
201
202* Fix minor help text issues
203
204* "log append" did not append a newline
205
206======================================================================
wdenkb0fce992003-06-29 21:03:46 +0000207Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +0000208======================================================================
209
wdenkb0fce992003-06-29 21:03:46 +0000210* Fix some missing commands, cleanup header files
211 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
212
wdenk9d2b18a2003-06-28 23:11:04 +0000213* Rewrite command lookup and help command (fix problems with bubble
214 sort when sorting command name list). Minor cleanup here and there.
215
wdenkd1cbe852003-06-28 17:24:46 +0000216* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
217 - Allow to call sysmon function interactively
218 - PIC on LWMON board needs delay after power-on
219 - Add missing RSR definitions for MPC8xx
220 - Improve log buffer handling: guarantee clean reset after power-on
221 - Add support for EXBITGEN board
222 - Add support for SL8245 board
223
wdenk8bde7f72003-06-27 21:31:46 +0000224* Code cleanup:
225 - remove trailing white space, trailing empty lines, C++ comments, etc.
226 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
227
228* Patches by Kenneth Johansson, 25 Jun 2003:
229 - major rework of command structure
230 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
231
232======================================================================
233Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +0000234======================================================================
235
wdenk993cad92003-06-26 22:04:09 +0000236* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +0000237 - csb226 configuration updated
238 - credits for logodl port updated
239 - innokom configuration updated
240 - logodl tree update, still with coding style inconsistencies
241 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +0000242
243* Patch by Pantelis Antoniou, 25 Jun 2003:
244 update NetVia with V2 board support
245
wdenkb783eda2003-06-25 22:26:29 +0000246* Header file cleanup for ARM
247
248* Patch by Murray Jensen, 24 Jun 2003:
249 - make sure to use only U-boot provided header files
250 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
251
stroesea300d832003-06-24 14:32:24 +0000252* Patch by Stefan Roese, 24 Jun 2003:
253 - Update esd ASH405 board files.
254 - Update esd DASA_SIM config file.
255 - Add ping command to some esd boards.
256
wdenkcceb8712003-06-23 18:12:28 +0000257* Patch by Yuli Barcohen, 23 Jun 2003:
258 Update for MPC8260ADS board
259
260* Patch by Murray Jensen, 23 Jun 2003:
261 - cleanup of GCC 3.x compiler warnings
262
wdenk3595ac42003-06-22 17:18:28 +0000263* Patch by Rune Torgersen, 4 Jun 2003:
264 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +0000265
wdenk3595ac42003-06-22 17:18:28 +0000266* Patch by Richard Woodruff, 19 June 03:
267 - Enabled standard u-boot device abstraction for ARM
268 - Enabled console device for ARM
269 - Initilized bi_baudrate for ARM
270
271* Patch by Bill Hargen, 23 Apr 2003:
272 fix byte order for 824x I2C addresses (write op)
273
wdenk592c5ca2003-06-21 00:17:24 +0000274* Patch by Murray Jensen, 20 Jun 2003:
275 - hymod update
276 - cleanup (especially for gcc-3.x compilers)
277
wdenk72755c72003-06-20 23:10:58 +0000278* Patch by Tom Guilliams, 20 Jun 2003:
279 added CONFIG_750FX support for IBM 750FX processors
280
wdenk03329902003-06-20 22:36:30 +0000281* Patch by Devin Crumb, 02 Apr 2003:
282 Fix clock divider rounding problem in drivers/serial.c
283
284* Patch by Richard Woodruff, 19 June 03:
285 - Fixed smc91c111 driver to sync with the u-boot environment
286 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +0000287 - Added eth_init error return check in NetLoop (net/net.c).
288
wdenk03329902003-06-20 22:36:30 +0000289* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +0000290 Added support for A3000 SBC board (Artis Microsystems Inc.)
291
wdenk6dd652f2003-06-19 23:40:20 +0000292* Patches by Murray Jensen, 17 Jun 2003:
293 - Hymod board database mods: add "who" field and new xilinx chip types
294 - provide new "init_cmd_timeout()" function so code external to
295 "common/main.c" can use the "reset_cmd_timeout()" function before
296 entering the main loop
297 - add DTT support for adm1021 (new file dtt/adm1021.c; config
298 slightly different. see include/configs/hymod.h for an example
299 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
300 CFG_DTT_ADM1021 defined)
301 - add new "eeprom_probe()" function which has similar args and
302 behaves in a similar way to "eeprom_read()" etc.
303 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
304 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
305 - gdbtools copyright update
306 - ensure that set_msr() executes the "sync" and "isync" instructions
307 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
308 - 8260 I/O ports fix: Open Drain should be set last when configuring
309 - add SIU IRQ defines for 8260
310 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
311 config.mk to allow board configurations to override the GNU
312 linker script, selected via the LDSCRIPT, make variable, and to
313 give an initial value to the OBJCFLAGS make variable
314 - 8260 i2c enhancement:
315 o correctly extends the timeout depending on the size of all
316 queued messages for both transmit and receive
317 o will not continue with receive if transmit times out
318 o ensures that the error callback is done for all queued tx
319 and rx messages
320 o correctly detects both tx and rx timeouts, only delivers one to
321 the callback, and does not overwrite an earlier error
322 o logic in i2c_probe now correct
323 - add "vprintf()" function so that "panic()" function can be
324 technically correct
325 - many Hymod board changes
326
wdenk52f52c12003-06-19 23:04:19 +0000327* Patches by Robert Schwebel, 14 Jun 2003:
328 - add support for Logotronic DL datalogger board
329 - cleanup serial line after kermit binary download
330 - add debugX macro (debug level support)
331 - update mach-types.h to latest arm.linux.org.uk master list.
332
wdenk48b42612003-06-19 23:01:32 +0000333* Patches by David Müller, 12 Jun 2003:
334 - rewrite of the S3C24X0 register definitions stuff
335 - "driver" for the built-in S3C24X0 RTC
336
337* Patches by Yuli Barcohen, 12 Jun 2003:
338 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
339 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
340 configuration word supplied by FPGA on some MPC8260ADS boards
341
342* Patch by Pantelis Antoniou, 10 Jun 2003:
343 Unify status LED interface
344
wdenk15ef8a52003-06-18 20:22:24 +0000345* Add support for DS12887 RTC; add RTC support for ATC board
346
wdenk2abbe072003-06-16 23:50:08 +0000347* Patch by Nicolas Lacressonniere, 11 Jun 2003:
348 Modifications for Atmel AT91RM9200DK ARM920T based development kit
349 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +0000350 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +0000351 - Add Flash detection on Atmel AT91RM9200DK
352 (between Atmel AT49BV1614 and AT49BV1614A flashes)
353 - Replace old Ethernet PHY layer functions
354 - Change link address
355
356* Patch by Frank Smith, 9 Jun 2003:
357 use CRIT_EXCEPTION for machine check on 4xx
358
359* Patch by Detlev Zundel, 13 Jun 2003:
360 added implementation of the "carinfo" command in cmd_immap.c
361
wdenk71f95112003-06-15 22:40:42 +0000362* Fix CONFIG_NET_MULTI support in include/net.h
363
364* Patches by Kyle Harris, 13 Mar 2003:
365 - Add FAT partition support
366 - Add command support for FAT
367 - Add command support for MMC
368 ----
369 - Add Intel PXA support for video
370 - Add Intel PXA support for MMC
371 ----
372 - Enable MMC and FAT for lubbock board
373 - Other misc changes for lubbock board
374
wdenk487778b2003-06-06 11:20:01 +0000375* Patch by Robert Schwebel, April 02, 2003:
376 fix for SMSC91111 driver
377
wdenka3ed3992003-06-05 19:37:36 +0000378* Patch by Vladimir Gurevich, 04 Jun 2003:
379 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
380
stroese08eaea92003-06-05 15:44:37 +0000381* Patch by Stefan Roese, 05 Jun 2003:
382 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
383 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
384 data cache can be used even if the chip select is in use.
385 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
386 (see README for further description).
387 - Changed config files of CONFIG_EEPRO100 boards to use the
388 CFG_RX_ETH_BUFFER define.
389
wdenk73a8b272003-06-05 19:27:42 +0000390* Add support for RMU board
391
392* Add support for TQM862L at 100/50 MHz
393
394* Patch by Pantelis Antoniou, 02 Jun 2003:
395 major reconstruction of networking code;
396 add "ping" support (outgoing only!)
397
wdenkf3e0de62003-06-04 15:05:30 +0000398* Patch by Denis Peter, 04 June 2003:
399 add support for the MIP405T board
400
wdenk682011f2003-06-03 23:54:09 +0000401* Patches by Udi Finkelstein, 2 June 2003:
402 - Added support for custom keyboards, initialized by defining a
403 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
404 - Added support for the RBC823 board.
405 - cpu/mpc8xx/lcd.c now automatically calculates the
406 Horizontal Pixel Count field.
407
408* Fix alignment problem in BOOTP (dhcp_leasetime option)
409 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
410
411* Patch by Mark Rakes, 14 May 2003:
412 add support for Intel e1000 gig cards.
413
414* Patch by Nye Liu, 3 Jun 2003:
415 fix critical typo in MAMR definition (include/mpc8xx.h)
416
417* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
418
419* Patch by Klaus Heydeck, 2 Jun 2003
420 Minor changes for KUP4K configuration
421
wdenk7a8e9bed2003-05-31 18:35:21 +0000422* Patch by Marc Singer, 29 May 2003:
423 Fixed rarp boot method for IA32 and other little-endian CPUs.
424
425* Patch by Marc Singer, 28 May 2003:
426 Added port I/O commands.
427
428* Patch by Matthew McClintock, 28 May 2003
429 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
430 - minor patches for utx8245
431
432* Patch by Daniel Engström, 28 May 2003:
433 x86 update
434
435* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
436 add nand flash support to SXNI855T configuration
437 fix/extend nand flash support:
438 - fix 'nand erase' command so does not erase bad blocks
439 - fix 'nand write' command so does not write to bad blocks
440 - fix nand_probe() so handles no flash detected properly
441 - add doc/README.nand
442 - add .jffs2 and .oob options to nand read/write
443 - add 'nand bad' command to list bad blocks
444 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
445 - make NAND read/write faster
446
447* Patch by Rune Torgersen, 23 May 2003:
448 Update for MPC8266ADS board
449
wdenk3b57fe02003-05-30 12:48:29 +0000450* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
451 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
452 _time_ (!) if the environment is embedded within the U-Boot image,
453 or in a separate flash sector.
454
455* Cleanup CFG_DER #defines in config files (wd maintained only)
456
wdenkf07771c2003-05-28 08:06:31 +0000457* Fix data abort exception handling for arm920t CPU
458
459* Fix alignment problems with flash driver for TRAB board
460
461* Patch by Donald White, 21 May 2003:
462 fix calculation of base address in pci_hose_config_device()
463
464* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
465 execute "cmd2", even if "cmd1" fails. Note that this is different
466 to "run var1 var2" where the contents of "var2" will NOT be
467 executed when a command in "var1" fails.
468
wdenk38b99262003-05-23 23:18:21 +0000469* Add zero-copy ramdisk support (requires corresponding kernel support!)
470
wdenk4c3b21a2003-05-23 12:36:20 +0000471* Patch by Kyle Harris, 20 May 2003:
472 In preparation for an ixp port, rename cpu/xscale and arch-xscale
473 into cpu/pxa and arch-pxa.
474
stroesed9ff6e82003-05-23 11:49:24 +0000475* Patch by Stefan Roese, 23 May 2003:
476 - IBM PPC405EP port added.
477 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
478 UART0) is used as default U-Boot console. PPC4xx only!
479 - esd ASH405 board added (PPC405EP based).
480 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
481 - esd CPCI405AB board added.
482 - esd PMC405 board added.
483 - Update of some esd boards.
484
wdenk33149b82003-05-23 11:38:58 +0000485* Patch by Denis Peter, 19 Mai 2003:
486 add support for the MIP405-3 board
487
wdenk5d232d02003-05-22 22:52:13 +0000488* Patch by Dave Ellis, 22 May 2003:
489 Fix problem with only partially cleared .bss segment
490
491* Patch by Rune Torgersen, 12 May 2003:
492 get PCI to work on a MPC8266ADS board; incorporate change to
493 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
494
495* Patch by Nye Liu, 1 May 2003:
496 minor patches for the FADS8xx
497
498* Patch by Thomas Schäfer, 28 Apr 2003:
499 Fix SPD handling for 256 ECC DIMM on Walnut
500
wdenkc8c3a8b2003-05-21 20:26:20 +0000501* Add support for arbitrary bitmaps for TRAB's VFD command;
502 allow to pass boot bitmap addresses in environment variables;
503 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +0000504
505* Patch by Christian Geißinger, 19 May 2002:
506 On TRAB: wait until the dummy byte has been completely sent
507
wdenk7f70e852003-05-20 14:25:27 +0000508* Patch by David Updegraff, 22 Apr 2003:
509 update for CrayL1 board
510
511* Patch by Pantelis Antoniou, 21 Apr 2003:
512 add boot support for ARTOS (a proprietary OS)
513
514* Patch by Steven Scholz, 11 Apr 2003:
515 Add support for RTC DS1338
516
517* Patch by Rod Boyce, 24 Jan 2003:
518 Fix counting of extended partitions in diskboot command
519
wdenk59de2ed2003-05-20 10:58:04 +0000520* Patch by Christophe Lindheimer, 20 May 2003:
521 allow the use of CFG_LOADS when CFG_NO_FLASH is set
522
wdenk86d82762003-05-20 10:39:44 +0000523* Fix SDRAM timing on Purple board
524
wdenk66fd3d12003-05-18 11:30:09 +0000525* Add support for CompactFlash on ATC board
526 (includes support for Intel 82365 and compatible PC Card controllers,
527 and Yenta-compatible PCI-to-CardBus controllers)
528
wdenk45219c42003-05-12 21:50:16 +0000529* Patch by Mathijs Haarman, 08 May 2003:
530 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
531
wdenk9c62cc52003-05-03 23:33:47 +0000532* Fix problem with usage of "true" (undefined in current versions of bfd.h)
533
wdenk7aa78612003-05-03 15:50:43 +0000534* Add support for Promess ATC board
535
536* Patch by Keith Outwater, 28 Apr 2003:
537 - Miscellaneous corrections and additions to GEN860T board specific code.
538 - Added GEN860_SC variant to GEN860T.
539 - Miscellaneous corrections to GEN860T documentation.
540 - Correct duplicate entry in U-Boot CREDITS file.
541 - Add GEN860T_SC entry in MAINTAINERS file.
542 - Update CREDITS file with GEN860T_SC info.
543
544* Update Smiths Aerospace addresses in MAINTAINERS file
545
546* Fix error handling in hush's version of "run" command
547
wdenk4532cb62003-04-27 22:52:51 +0000548* LWMON extensions:
549 - Splashscreen support
550 - modem support
551 - sysmon support
552 - temperature dependend enabling of LCD
553
554* Allow booting from old "PPCBoot" disk partitions
555
556* Add support for TQM8255 Board / MPC8255 CPU
557
558======================================================================
wdenk02c9bed2003-04-20 17:41:25 +0000559Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +0000560======================================================================
561
wdenkd791b1d2003-04-20 14:04:18 +0000562* Make sure Block Lock Bits get cleared in R360MPI flash driver
563
564* MPC823 LCD driver: Fill color map backwards, to allow for steady
565 display when Linux takes over
566
567* Patch by Erwin Rol, 27 Feb 2003:
568 Add support for RTEMS (this time for real).
569
570* Add support for "bmp info" and "bmp display" commands to load
571 bitmap images; this can be used (for example in a "preboot"
572 command) to display a splash screen very quickly after poweron.
573
574* Add support for 133 MHz clock on INCA-IP board
575
wdenk4a6fd342003-04-12 23:38:12 +0000576* Patch by Lutz Dennig, 10 Apr 2003:
577 Update for R360MPI board
578
579* Add new meaning to "autostart" environment variable:
580 If set to "no", a standalone image passed to the
581 "bootm" command will be copied to the load address
582 (and eventually uncompressed), but NOT be started.
583 This can be used to load and uncompress arbitrary
584 data.
585
stroese69f8f8272003-04-10 13:30:28 +0000586* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +0000587 Changed DHCP client to use IP address from server option field #54
588 from the OFFER packet in the server option field #54 in the REQUEST
589 packet. This fixes a problem using a Windows 2000 DHCP server,
590 where the DHCP-server is not the TFTP-server.
591
592* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +0000593
wdenkd126bfb2003-04-10 11:18:18 +0000594* Add support for TQM862L modules
595
596======================================================================
wdenk60fbe252003-04-08 23:25:21 +0000597Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +0000598======================================================================
599
wdenk3e386912003-04-05 00:53:31 +0000600* Patch by Arun Dharankar, 4 Apr 2003:
601 Add IDMA example code (tested on 8260 only)
602
603* Add support for Purple Board (MIPS64 5Kc)
604
605* Add support for MIPS64 5Kc CPUs
606
607* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
608
609* Patch by Denis Peter, 04 Apr 2003:
610 - update MIP405-4 board
611
stroese36c05a82003-04-04 16:55:30 +0000612* Patch by Stefan Roese, 4 Apr 2003:
613 - U-Boot version environment variable "ver" added
614 (CONFIG_VERSION_VARIABLE).
615 - Changed PPC405GPr version from A to B.
616 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
617
wdenk3e386912003-04-05 00:53:31 +0000618* Patches by Denis Peter, 03 April 2003:
619 - fix PCI IRQs on MPL boards
620 - fix two more un-relocated pointer problems
621
622* Fix behaviour of "run" command:
623 - print error message iv variable does not exist
624 - terminate processing of arguments in case of error
625
626* Patches by Peter Figuli, 10 Mar 2003
627 - Add support for BTUART on PXA platform
628 - Add support for WEP EP250 (PXA) board
629
630* Fix flash problems on INCA-IP; add tool to allow bruning images to
631 flash using a BDI2000
632
633* Implement fix for I2C Edge Conditions problem for all boards that
634 use the bit-banging driver (common/soft_i2c.c)
635
wdenk0db5bca2003-03-31 17:27:09 +0000636* Patch by Martin Winistoerfer, 23 Mar 2003
637 - Add port to MPC555/556 microcontrollers
638 - Add support for cmi customer board with
639 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
640
641* Patch by Rick Bronson, 28 Mar 2003:
642 - fix common/cmd_nand.c
643
wdenk85ec0bc2003-03-31 16:34:49 +0000644* Patch by Arun Dharankar, 24 Mar 2003:
645 - add threads / scheduler example code
646
647* Add patches by Robert Schwebel, 31 Mar 2003:
648 - add ctrl-c support for kermit download
649 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +0000650 - csb226 board: bring in sync with innokom/memsetup.S
651 - csb226 board: fix MDREFR handling
652 - misc doc fixes / extensions
653 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
654 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +0000655
stroese36c05a82003-04-04 16:55:30 +0000656* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +0000657
wdenk506f0442003-03-28 14:40:36 +0000658* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
659 - fix SRAM and SDRAM memory sizing
660 - add status LED support
661 - add MAC address for second (SCC1) ethernet port
662
663* Update default environment for TQM8260 board
664
wdenkdc7c9a12003-03-26 06:55:25 +0000665* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +0000666 - Add NAND flash support for reading, writing, and erasing NAND
667 flash (certain forms of which are called SmartMedia).
668 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +0000669
670* Patches by Robert Schwebel, 19 Mar 2003:
671 - use arm-linux-gcc as default compiler for ARM
672 - fix i2c fixup code
673 - fix missing baudrate setting
674 - added $loadaddr / CFG_LOAD_ADDR support to loadb
675 - moved "ignoring trailing characters" _before_ u-boot wants to
676 print out diagnostics messages; removes bogus characters at the
677 end of transmission
678
679* Patch by John Zhan, 18 Mar 2003:
680 Add support for SinoVee Microsystems SC8xx boards
681
682* Patch by Rolf Offermanns, 21 Mar 2003:
683 ported the dnp1110 related changes from the current armboot cvs to
684 current u-boot cvs. smc91111 does not work. problem marked in
685 smc91111.c, grep for "FIXME".
686
687* Patch by Brian Auld, 25 Mar 2003:
688 Add support for STM flash chips on ebony board
689
wdenk4d75a502003-03-25 16:50:56 +0000690* Add PCI support for MPC8250 Boards (PM825 module)
691
stroese44e5c5c2003-03-25 14:44:48 +0000692* Patch by Stefan Roese, 25 Mar 2003:
693 - PCI405 update.
694
stroese5d5d44e2003-03-20 15:32:59 +0000695* Patch by Stefan Roese, 20 Mar 2003:
696 - CPCI4052 update (support for revision 3).
697 - Set edge conditioning circuitry on PPC405GPr for compatibility
698 to existing PPC405GP designs.
699 - Clip udiv to 5 bits on PPC405 (serial.c).
700
wdenkc0218802003-03-27 12:09:35 +0000701* Extend INCAIP board support:
702 - add automatic RAM size detection
703 - add "bdinfo" command
704 - pass flash address and size to Linux kernel
705 - switch to 150 MHz clock
706
wdenk06d01db2003-03-14 20:47:52 +0000707* Avoid flicker on the TRAB's VFD by synchronizing the enable with
708 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
709 boards, version 153 for Rev. 200 boards).
710
711* Patch by Vladimir Gurevich, 12 Mar 2003:
712 Fix relocation problem of statically initialized string pointers
713 in common/cmd_pci.c
714
715* Patch by Kai-Uwe Blöm, 12 Mar 2003:
716 Cleanup & bug fixes for JFFS2 code:
717 - the memory mangement was broken. It caused havoc on malloc by
718 writing beyond the block boundaries.
719 - the length calculation for files was wrong, sometimes resulting
720 in short file reads.
721 - data copying now optionally takes fragment version numbers into
722 account, to avoid copying from older data.
723 See doc/README.JFFS2 for details.
724
wdenk3bac3512003-03-12 10:41:04 +0000725* Patch by Josef Wagner, 12 Mar 2003:
726 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
727 - ETH05 and BEDBUG support for CU824
728 - added support for MicroSys CPC45
729 - new BOOTROM/FLASH0 and DOC base for PM826
730
731* Patch by Robert Schwebel, 12 Mar 2003:
732 Fix the chpart command on innokom board
733
734* Name cleanup:
735 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
736 s/PPCBoot/U-Boot/ in some files
737 s/pImage/uImage/ in some files
738
739* Patch by Detlev Zundel, 15 Jan 2003:
740 Fix '' command line quoting
741
742* Patch by The LEOX team, 19 Jan 2003:
743 - add support for the ELPT860 board
744 - add support for Dallas ds164x RTC
745
wdenk1cb8e982003-03-06 21:55:29 +0000746* Patches by David Müller, 31 Jan 2003:
747 - minimal setup for CardBus bridges
748 - add EEPROM read/write support in the CS8900 driver
749 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +0000750 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +0000751
752* Patch by Steven Scholz, 04 Feb 2003:
753 add support for RTC DS1307
754
755* Patch by Reinhard Meyer, 5 Feb 2003:
756 fix PLPRCR/SCCR init sequence on 8xx to allow for
757 changes of EBDF by software
758
759* Patch by Vladimir Gurevich, 07 Feb 2003:
760 "API-compatibility patch" for 4xx I2C driver
761
762* TRAB fixes / extensions:
763 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +0000764 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +0000765 - make sure both buzzers are turned off (drive low level)
766
wdenk47cd00f2003-03-06 13:39:27 +0000767* Patches by Robert Schwebel, 06 Mar 2003:
768 - fix bug in BOOTP code (must use NetCopyIP)
769 - update of CSB226 port
770 - clear BSS segment on XScale
771 - added support for i2c_init_board() function
772 - update to the Innokom plattform
773
774* Extend support for redundand environments for configurations where
775 environment size < sector size
776
wdenkdb2f721f2003-03-06 00:58:30 +0000777* Patch by Rune Torgersen, 13 Feb 2003:
778 Add support for Motorola MPC8266ADS board
779
780* Patch by Kyle Harris, 19 Feb 2003:
781 patches for the Intel lubbock board:
782 memsetup.S - general cleanup (based on Robert's csb226 code)
783 flash.c - overhaul, actually works now
784 lubbock.c - fix init funcs to return proper value
785
786* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +0000787 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +0000788 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +0000789 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +0000790 - Takes function pointer to function for reading the spd_nvram. Usefull
791 for faking data or hardcode a module without the nvram.
792 - fix other user for above change
793 - fix some comments.
794
795* Patches by Brian Waite, 26 Feb 2003:
796 - fix port for evb64260 board
797 - fix PCI for evb64260 board
798 - fix PCI scan
799
800* Patch by Reinhard Meyer, 1 Mar 2003:
801 Add support for EMK TOP860 Module
802
803* Patch by Yuli Barcohen, 02 Mar 2003:
804 Add SPD EEPROM support for MPC8260ADS board
805
wdenk43d96162003-03-06 00:02:04 +0000806* Patch by Robert Schwebel, 21 Jan 2003:
807 - Add support for Innokom board
808 - Don't complain if "install" fails
809 - README cleanup (remove duplicated lines)
810 - Update PXA header files
811
812* Add documentation for existing POST code (doc/README.POST)
813
814* Patch by Laudney Ren, 15 Jan 2003:
815 Fix handling of redundand environment in "tools/envcrc.c"
816
817* Patch by Detlev Zundel, 28 Feb 2003:
818 Add bedbug support for 824x systems
819
820* Add support for 16 MB flash configuration of TRAB board
821
822* Patch by Erwin Rol, 27 Feb 2003:
823 Add support for RTEMS
824
825* Add image information to README
826
stroese2a9e02e2003-02-18 11:30:24 +0000827* Patch by Stefan Roese, 18 Feb 2003:
828 CPCIISER4 configuration updated.
829
stroesed7787c62003-02-17 16:06:06 +0000830* Patch by Stefan Roese, 17 Feb 2003:
831 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
832
stroesead10dd92003-02-14 11:21:23 +0000833* Patch by Stefan Roese, 13 Feb 2003:
834 Add "pcidelay" environment variable (in ms, enabled via
835 CONFIG_PCI_BOOTDELAY).
836 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
837 RST# to respond to configuration cycles (33MHz -> 1s).
838
wdenk43d96162003-03-06 00:02:04 +0000839* Fix dual PCMCIA slot support (when running with just one
840 slot populated)
841
842* Add VFD type detection to trab board
843
844* extend drivers/cs8900.c driver to synchronize ethaddr environment
845 variable with value in the EEPROM
846
stroeseee1b3b52003-02-10 16:39:00 +0000847* Patch by Stefan Roese, 10 Feb 2003:
848 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
849
wdenkc0218802003-03-27 12:09:35 +0000850* Add support for MIPS32 4Kc CPUs
851
852* Add support for INCA-IP Board
853
wdenk43d96162003-03-06 00:02:04 +0000854======================================================================
855Changes for U-Boot 0.2.2:
856======================================================================
857
wdenkaacf9a42003-01-17 16:27:01 +0000858* Add dual ethernet support on PM826
859
860* Add support for LXT971 PHY on PM826
861
862* Patch by Tord Andersson, 16 Jan 2003:
863 Fix flash sector count for TQM8xxL
864
865* Fix I2C EEPROM problem on ICU862 board (would only write the first
866 16 bytes out of each 32 byte block)
867
868======================================================================
869Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +0000870======================================================================
871
wdenk608c9142003-01-13 23:54:46 +0000872* Add support for V37 board
873 (patch by Jón Benediktsson, 11 Dec 2002)
874
wdenkd0fb80c2003-01-11 09:48:40 +0000875* Update baudrate in bd_info when it gets changed
876
877* Add watchdog trigger points while waiting for serial port
878 (so far only 8xx -- needed on LWMON with 100ms watchdog)
879
880* Improve command line tool to access the U-Boot's environment
881 (figuration of the utility, using a config file)
882
wdenka25f8622003-01-02 23:57:29 +0000883* Add single quote support for (old) command line parser
884
wdenk288b3d72002-12-20 23:42:25 +0000885* Switch LWMON board default config from FRAM to EEPROM;
886 in POST, EEPROM shows up on 8 addresses
887
888======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +0000889Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +0000890======================================================================
891
wdenk6aff3112002-12-17 01:51:00 +0000892* Use 1-byte-read instead of -write for iprobe() function
893 Add i2c commands to PM826 config
894
895* extend I2C POST code: check for list on known addresses
896
wdenk228f29a2002-12-08 09:53:23 +0000897* Improve log buffer code; use "loglevel" to decide which messages
898 to log on the console, too (like in Linux); get rid of "logstart"
899
900* Add command line tool to access the U-Boot's environment
901 (board-specific for TRAB now, to be fixed later)
902
wdenk7c7a23b2002-12-07 00:20:59 +0000903* Patch by Hans-Joerg Frieden, 06 Dec 2002
904 Fix misc problems with AmigaOne support
905
906* Patch by Chris Hallinan, 3 Dec 2002:
907 minor cleanup to the MPC8245 EPIC driver
908
909* Patch by Pierre Aubert , 28 Nov 2002
910 Add support for external (SIU) interrupts on MPC8xx
911
912* Patch by Pierre Aubert , 28 Nov 2002
913 Fix nested syscalls bug in standalone applications
914
915* Patch by David Müller, 27 Nov 2002:
916 fix output of "pciinfo" command for CardBus bridge devices.
917
918* Fix bug in TQM8260 board detection - boards got stuck when board ID
919 was not readable
920
wdenk1f53a412002-12-04 23:39:58 +0000921* Add LED indication for IDE activity on KUP4K board
922
wdenka6c7ad22002-12-03 21:28:10 +0000923* Fix startup problems with VFD display on TRAB
924
925* Patch by Pierre Aubert, 20 Nov 2002
926 Add driver for Epson SED13806 graphic controller.
927 Add support for BMP logos in cfb_console driver.
928
wdenkea909b72002-11-21 23:11:29 +0000929* Added support for both PCMCIA slots (at the same time!) on MPC8xx
930
931* Patch by Rod Boyce, 21 Nov 2002:
932 fix PCMCIA on MBX8xx board
933
934* Patch by Pierre Aubert , 21 Nov 2002
935 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
936 bootmode word in DPRAM configurable
937
wdenkb2184c32002-11-19 23:01:07 +0000938* Patch by Daniel Engström, 18 Nov 2002:
939 Fixes for x86 port (mostly strings issues)
940
941* Patch by Ken Chou, 18 Nov 2002:
942 Fix for natsemi NIC cards (DP83815)
943
944* Patch by Pierre Aubert, 19 Nov 2002:
945 fix a bug for the MII configuration, and some warnings
946
wdenkc7de8292002-11-19 11:04:11 +0000947* Patch by Thomas Frieden, 13 Nov 2002:
948 Add code for AmigaOne board
949 (preliminary merge to U-Boot, still WIP)
950
951* Patch by Jon Diekema, 12 Nov 2002:
952 - Adding URL for IEEE OUI lookup
953 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
954 being defined.
955 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
956 root-on-nfs macros are designed to switch how the default boot
957 method gets defined.
958
wdenk2262cfe2002-11-18 00:14:45 +0000959* Patch by Daniel Engström, 13 Nov 2002:
960 Add support for i386 architecture and AMD SC520 board
961
962* Patch by Pierre Aubert, 12 Nov 2002:
963 Add support for DOS filesystem and booting from DOS floppy disk
964
wdenk1d0350e2002-11-11 21:14:20 +0000965* Patch by Jim Sandoz, 07 Nov 2002:
966 Increase number of network RX buffers (PKTBUFSRX in
967 "include/net.h") for EEPRO100 based boards (especially SP8240)
968 which showed "Receiver is not ready" errors when U-Boot was
969 processing the receive buffers slower than the network controller
970 was filling them.
971
wdenkeb9401e2002-11-11 02:11:37 +0000972* Patch by Andreas Oberritter, 09 Nov 2002:
973 Change behaviour of NetLoop(): return -1 for errors, filesize
974 otherwise; return code 0 is valid an means no file loaded - in this
975 case the environment still gets updated!
976
977* Patches by Jon Diekema, 9 Nov 2002:
978 - improve ADC/DAC clocking on the SACSng board to align
979 the failing edges of LRCLK and SCLK
980 - sbc8260 configuration tweaks
981 - add status LED support for 82xx systems
982 - wire sspi/sspo commands into command handler; improved error
983 handlering
984 - add timestamp support and alternate memory test to the
985 SACSng configuration
986
987* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +0000988 Add "-n" to linker options to get rid of "Not enough room for
989 program headers" problem
990
991* Patch by David Müller, 05 Nov 2002
992 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
993 so we can use an already existing name
994
995* Patch by Pierre Aubert, 05 Nov 2002
996 Hardware relatied improvments in FDC boot code
997
998* Patch by Holger Schurig, 5 Nov 2002:
999 Make the PXA really change it's frequency
1000
1001* Patch by Pierre Aubert, 05 Nov 2002
1002 Add support for slave serial Spartan 2 FPGAs
1003
1004* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
1005 drivers
1006
wdenk56f94be2002-11-05 16:35:14 +00001007* Add support for log buffer which can be passed to Linux kernel's
1008 syslog mechanism; used especially for POST results.
1009
1010* Patch by Klaus Heydeck, 31 Oct 2002:
1011 Add initial support for kup4k board
1012
wdenk384ae022002-11-05 00:17:55 +00001013* Patch by Robert Schwebel, 04 Nov 2002:
1014 - use watchdog to reset PXA250 systems
1015 - added progress callbacks to (some of the) ARM code
1016 - update for Cogent CSB226 board
1017
1018* Add support for FPS860 board
1019
wdenke95b61c2002-11-04 16:02:40 +00001020* Patch by Guillaume Alexandre,, 04 Nov 2002:
1021 Improve PCI access on 32-bits Compact PCI bus
1022
wdenk24ee89b2002-11-03 17:56:27 +00001023* Fix mdelay() on TRAB - this was still the debugging version with
1024 seconds instead of ms.
1025
1026* Patch by Robert Schwebel, 1 Nov 2002:
1027 XScale related cleanup (affects all ARM boards)
1028
1029* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00001030
1031======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00001032Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00001033======================================================================
1034
1035This is the initial version of "Das U-Boot", the Universal Boot Loader.
1036
1037It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
1038For information about the history of the project please see the
1039PPCBoot project page at http://sourceforge.net/projects/ppcboot
1040
1041======================================================================