blob: a0c3660e179fb116c330a3ac75953dc46e63a849 [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
wdenk5cf9da42003-11-07 13:42:26 +00002Changes since U-Boot 1.0.0:
3======================================================================
4
wdenk5bb226e2003-11-17 21:14:37 +00005* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
6 recent tools
7
8* Add checksum verification to 'imls' command
9
10* Add bd_info fields needed for 4xx Linux I2C driver
11
12* Patch by Martin Krause, 4 Nov. 2003:
13 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
14
15* Print used network interface when CONFIG_NET_MULTI is set
16
wdenk5cf9da42003-11-07 13:42:26 +000017* Patch by Bernhard Kuhn, 28 Oct 2003:
18 Add low boot support for MPC5200
19
20* Fix problem with dual PCMCIA support (NSCU)
21
22* Fix MPC5200 I2C initialization function
23
24======================================================================
wdenka43278a2003-09-11 19:48:06 +000025Changes for U-Boot 1.0.0:
26======================================================================
27
wdenkb13fb012003-10-30 21:49:38 +000028* Fix parameter passing to standalone images with bootm command
29
30* Patch by Kyle Harris, 30 Oct 2003:
31 Fix build errors for ixdp425 board
32
33* Patch by David M. Horn, 29 Oct 2003:
34 Fixes to build under CYGWIN
35
36* Get IceCube MGT5100 working (again)
37
wdenk5fa66df2003-10-29 23:18:55 +000038* Fix problems in memory test on some boards (which was not
39 non-destructive as intended)
40
41* Patch by Gary Jennejohn, 28 Oct 2003:
42 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
43 to prevent stack overflow on ARM systems
44
wdenka0f2fe52003-10-28 09:14:21 +000045* Patch by Stephan Linz, 28 Oct 2003:
46 fix init sequence error for NIOS port
47
48* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
49
50* Add CONFIG_VERSION_VARIABLE to TRAB configuration
51
wdenka57a4962003-10-26 22:52:58 +000052* Patch by Xiao Xianghua, 23 Oct 2003:
53 small patch for mpc85xx
54
55* Fix small problem in MPC5200 I2C driver
56
57* Fix FCC3 support on ATC board
58
dzu8cb81432003-10-24 13:14:45 +000059* Correct header printing for multi-image files in do_bootm()
60
61* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
62
wdenk4654af22003-10-22 09:00:28 +000063* Fix PCI problems on PPChameleon board
64
wdenka3ad8e22003-10-19 23:22:11 +000065* Patch by Steven Scholz, 18 Oct 2003:
66 Fix AT91RM9200 ethernet driver
67
68* Patch by Nye Liu, 17 Oct 2003:
69 Fix typo in include/mpc8xx.h
70
71* Patch by Richard Woodruff, 16 Oct 03:
72 Fixes for cpu/arm925/interrupt.c
73 - Initialize timestamp & lastdec vars.
74 - fix timestamp overflows.
75 - fix lastdec overflow.
76 - smarter normalization to allow udelay() below 1ms to work.
77
78* Patch by Scott McNutt, 16 Oct
79 add networking support for the Altera Nios Development Kit,
80 Cyclone Edition (DK-1C20)
81
82* Patch by Jon Diekema, 14 Oct 2003:
83 add hint about doc/README.silent to README file
84
dzue7df0292003-10-19 21:43:26 +000085* Add CompactFlash support for NSCU
86
wdenkd7281f42003-10-19 22:30:08 +000087* Fix PCI problems on PPChameleonEVB
88
wdenk3d1e8a92003-10-16 12:53:35 +000089* TRAB auto-update: Base decision if we have to strip the image
90 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +000091 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +000092
wdenk42d1f032003-10-15 23:53:47 +000093* Patches by Xianghua Xiao, 15 Oct 2003:
94
95 - Added Motorola CPU 8540/8560 support (cpu/85xx)
96 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
97 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
98
99* Fix flash timings on TRAB board
100
wdenk2d5b5612003-10-14 19:43:55 +0000101* Make sure HUSH is initialized for running auto-update scripts
102
103* Make 5200 reset command _really_ reset the board, without running
104 any other code after it
105
106* Fix errors with flash erase when range spans across banks
107 that are mapped in reverse order
108
109* Fix flash mapping and display on P3G4 board
110
111* Patch by Kyle Harris, 15 Jul 2003:
112 - add support for Intel IXP425 CPU
113 - add support for IXDP425 eval board
114
wdenkf72da342003-10-10 10:05:42 +0000115* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
116 for more information
117
wdenk5da627a2003-10-09 20:09:04 +0000118* Patch by Steven Scholz, 10 Oct 2003
119 - Add support for Altera FPGA ACEX1K
120
wdenk15647dc2003-10-09 19:00:25 +0000121* Patches by Thomas Lange, 09 Oct 2003:
122 - fix cmd_ide.c for non ppc boards (read/write functions did not
123 add ATA base address)
124 - fix for shannon board
125 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +0000126 - Endian swap ATA identity for all big endian CPUs, not just PPC
127 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
128 args to linux
129 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +0000130
131* Patch by Sangmoon Kim, 07 Oct 2003:
132 add support for debris board
133
wdenka0ff7f22003-10-09 13:16:55 +0000134* Patch by Martin Krause, 09 Oct 2003:
135 Fixes for TRAB board
136 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +0000137 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +0000138 udelay(); fix some timing problems with adc controller
139 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
140 modify commands: touch and buzzer
141
142* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
143 (quick & dirty workaround for rogue pointer problem in get_vfatname());
144 Use direct function calls for auto_update instead of hush commands
145
wdenk4a551702003-10-08 23:26:14 +0000146* Patch by Scott McNutt, 04 Oct 2003:
147 - add support for Altera Nios-32 CPU
148 - add support for Nios Cyclone Development Kit (DK-1C20)
149
150* Patch by Steven Scholz, 29 Sep 2003:
151 - A second parameter for bootm overwrites the load address for
152 "Standalone Application" images.
153 - bootm sets environment variable "filesize" to the resulting
154 (uncompressed) data length for "Standalone Application" images
155 when autostart is set to "no". Now you can do something like
156 if bootm $fpgadata $some_free_ram ; then
157 fpga load 0 $some_free_ram $filesize
158 fi
159
160* Patch by Denis Peter, 25 Sept 2003:
161 add support for the MIP405 Rev. C board
162
wdenk54387ac2003-10-08 22:45:44 +0000163* Patch by Yuli Barcohen, 25 Sep 2003:
164 add support for Zephyr Engineering ZPC.1900 board
165
166* Patch by Anders Larsen, 23 Sep 2003:
167 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
168 implemented for the x86 architecture)
169
wdenkfc3e2162003-10-08 22:33:00 +0000170* Patch by Sangmoon Kim, 23 Sep 2003:
171 fix pll_pci_to_mem_multiplier table for MPC8245
172
173* Patch by Anders Larsen, 22 Sep 2003:
174 enable timed autoboot on PXA
175
176* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +0000177 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
178 returns correct libgcc file path
179 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
180 time on s3c24x0 systems
181
182* Patch by Jon Diekema, 19 Sep 2003:
183 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
184 link state to the fault LED.
185 - In NetLoop, make the Fault LED reflect the link status. The link
186 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +0000187
wdenkef1464c2003-10-08 22:14:02 +0000188* Patch by Anders Larsen, 18 Sep 2003:
189 allow mkimage to build and run on Cygwin-hosted systems
190
191* Patch by Frank Müller, 18 Sep 2003:
192 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
193 cpu/mpc8xx/fec.c
194
195* Patch by Pantelis Antoniou, 16 Sep 2003:
196 add tool to compute fileds in the PLPRCR register for MPC86x
197
wdenkd9a405a2003-10-07 20:01:55 +0000198* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
199
wdenk147031a2003-10-07 10:33:38 +0000200* Fix build problems under FreeBSD
201
wdenk887b3722003-10-06 22:00:45 +0000202* Add generic filesystem image type
203
wdenkfbe4b5c2003-10-06 21:55:32 +0000204* Make fatload set filesize environment variable
205
206* enable basic / medium / high-end configurations for PPChameleonEVB
207 board; fix NAND code
208
209* enable TFTP client code to specify to the server the desired
210 timeout value (see RFC-2349)
211
dzubb65a312003-09-30 15:22:12 +0000212* Improve SDRAM setup for TRAB board
213
dzu88a1bfa2003-09-30 15:11:43 +0000214* Suppress all output with splashscreen configured only if "splashimage"
215 is set
216
dzucad07372003-09-30 14:36:51 +0000217* Fix problems with I2C support for mpc5200
218
dzu8a42eac2003-09-29 21:55:54 +0000219* Adapt TRAB configuration and auto_update to new memory layout
220
dzu91e940d2003-09-25 22:32:40 +0000221* Add configuration for wtk board
222
dzu29127b62003-09-25 22:30:12 +0000223* Add support for the Sharp LQ065T9DR51U LCD display
224
wdenk206c60c2003-09-18 10:02:25 +0000225* Patch by Rune Torgersen, 17 Sep 2003:
226 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +0000227 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +0000228
229* Patches by Jon Diekema, 17 Sep 2003:
230 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
231 env_common.c)
232 - sbc8260 tweaks
233 - adjust "help" output
234
wdenk5f535fe2003-09-18 09:21:33 +0000235* Patches by Anders Larsen, 17 Sep 2003:
236 - fix spelling errors
237 - set GD_FLG_DEVINIT flag only after device function pointers
238 are valid
239 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
240 writeable
241 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
242 - trigger watchdog while waiting in serial driver
243
wdenkb0639ca2003-09-17 22:48:07 +0000244* Add auto-update code for TRAB board using USB memory sticks,
245 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +0000246
wdenkef709e92003-09-16 17:35:37 +0000247* disable MPC5200 bus pipelining as workaround for bus contention
248
wdenk4aeb2512003-09-16 17:06:05 +0000249* Modify XLB arbiter priorities on MPC5200 so all devices use same
250 priority; configure critical interrupts to be handled like external
251 interrupts
252
wdenkacf98e72003-09-16 11:39:10 +0000253* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
254 go back to 66 MHz for stability
255
wdenk78137c32003-09-15 18:00:00 +0000256* Patches by Jon Diekema, 15 Sep 2003:
257 - add description for missing CFG_CMD_* entries in the README file
258 - sacsng tweaks
259
wdenk35656de2003-09-14 19:08:39 +0000260* Patch by Gleb Natapov, 14 Sep 2003:
261 enable watchdog support for all MPC824x boards that have a watchdog
262
263* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
264 "Non-octet Aligned Frame" errors we see at 100 Mbps
265
266* Patch by Sharad Gupta, 14 Sep 2003:
267 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
268
wdenk200f8c72003-09-13 19:13:29 +0000269* Patch by llandre, 11 Sep 2003:
270 update configuration for PPChameleonEVB board
271
wdenk531716e2003-09-13 19:01:12 +0000272* Patch by David Müller, 13 Sep 2003:
273 various changes to VCMA9 board specific files
274
275* Add I2C support for MGT5100 / MPC5200
276
wdenkb70e7a02003-09-12 20:09:09 +0000277* Patch by Rune Torgersen, 11 Sep 2003:
278 Changed default memory option on MPC8266ADS to NOT be Page Based
279 Interleave, since this doesn't work very well with the standard
280 16MB DIMM
281
282* Patch by George G. Davis, 12 Sep 2003:
283 fix Makefile settings for sk98 driver
284
stroese68ce8952003-09-12 08:57:52 +0000285* Patch by Stefan Roese, 12 Sep 2003:
286 - new boards added: DP405, HUB405, PLU405, VOH405
287 - some esd boards updated
288 - cpu/ppc4xx/sdram.c: disable memory controller before setting
289 first values
290 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
291
wdenk4f7cb082003-09-11 23:06:34 +0000292* Patch by Martin Krause, 11 Sep 2003:
293 add burn-in tests for TRAB board
294
295* Enable instruction cache on MPC5200 board
296
wdenka43278a2003-09-11 19:48:06 +0000297* Patch by Denis Peter, 11 Sep 2003:
298 - fix USB data pointer assignment for bulk only transfer.
299 - prevent to display erased directories in FAT filesystem.
300
301* Change output format for NAND flash - make it look like for other
302 memory, too
303
304======================================================================
wdenk149dded2003-09-10 18:20:28 +0000305Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +0000306======================================================================
307
dzu29127b62003-09-25 22:30:12 +0000308* Add I2C and RTC support for RMU board
309
wdenk7205e402003-09-10 22:30:53 +0000310* Patches by Denis Peter, 9 Sep 2003:
311 add FAT support for IDE, SCSI and USB
312
313* Patches by Gleb Natapov, 2 Sep 2003:
314 - cleanup of POST code for unsupported architectures
315 - MPC824x locks way0 of data cache for use as initial RAM;
316 this patch unlocks it after relocation to RAM and invalidates
317 the locked entries.
318
319* Patch by Gleb Natapov, 30 Aug 2003:
320 new I2C driver for mpc107 bridge. Now works from flash.
321
322* Patch by Dave Ellis, 11 Aug 2003:
323 - JFFS2: fix typo in common/cmd_jffs2.c
324 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
325 - JFFS2: remove node version 0 warning
326 - JFFS2: accept JFFS2 PADDING nodes
327 - SXNI855T: add AM29LV800 support
328 - SXNI855T: move environment from EEPROM to flash
329 - SXNI855T: boot from JFFS2 in NOR or NAND flash
330
331* Patch by Bill Hargen, 11 Aug 2003:
332 fixes for I2C on MPC8240
333 - fix i2c_write routine
334 - fix iprobe command
335 - eliminates use of global variables, plus dead code, cleanup.
336
wdenk149dded2003-09-10 18:20:28 +0000337* Add support for USB Mass Storage Devices (BBB)
338 (tested with USB memory sticks only)
339
340* Avoid flicker on TRAB's VFD
341
wdenk7152b1d2003-09-05 23:19:14 +0000342* Add support for SK98xx driver
343
344* Add PCI support for SL8245 board
345
346* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
347 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
348 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
349
350* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
351 to allow for more accurate baudrate settings
352 (error now 0.7% at 115 kbps, instead of 3.5% before)
353
354* Patch by Andreas Mohr, 4 Sep 2003:
355 Fix a lot of spelling errors
356
wdenk12f34242003-09-02 22:48:03 +0000357* Add support for PPChameleon Eval Board
358
359* Add support for P3G4 board
360
361* Fix problem with MGT5100 FEC driver: add "early" MAC address
362 initialization
363
wdenk326428c2003-08-31 18:37:54 +0000364* Patch by Yuli Barcohen, 7 Aug 2003:
365 check BCSR to detect if the board is configured in PCI mode
366
wdenk149dded2003-09-10 18:20:28 +0000367======================================================================
368Changes for U-Boot 0.4.7:
369======================================================================
370
wdenk0cb61d72003-08-30 00:05:50 +0000371* Patch by Raghu Krishnaprasad, 7 Aug 2003:
372 add support for Adder II MPC852T module
373
wdenk6f213472003-08-29 22:00:43 +0000374* Patch by George G. Davis, 19 Aug 2003:
375 fix TI Innovator/OMAP1510 pin configs
376
377* Patches by Kshitij, 18 Aug 2003
378 - add support for arm926ejs cpu core
379 - add support for TI OMAP 1610 Innovator Board
380
wdenkc29fdfc2003-08-29 20:57:53 +0000381* Patch by Yuli Barcohen, 14 Aug 2003:
382 add support for bzip2 uncompression
383
384* Add GCC library to examples/Makefile so GCC utility functions will
385 be resolved, too
386
wdenkca75add2003-08-29 10:05:53 +0000387* Add I2C and RTC support for RMU board using software I2C driver
388 (because of better response to iprobe command); fix problem with
389 "reset" command
390
stroese437ce072003-08-28 14:24:37 +0000391* Patch by Matthias Fuchs, 28 Aug 2003:
392 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
393 CONFIG_BOOTP_MAKS (see README).
394
wdenkd94f92c2003-08-28 09:41:22 +0000395* Fix ICU862 environment problem
396
397* Fix RAM size detection for RMU board
398
399* Implement "reset" for MGT5100/MPC5200 systems
400
401======================================================================
402Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +0000403======================================================================
404
wdenke0ac62d2003-08-17 18:55:18 +0000405* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
406 allow selection of clock frequency as "make" target
407
408* Implement memory autosizing code for IceCube boards
409
410* Configure network port on INCA-IP for autonegotiation
411
412* Fix overflow problem in network timeout code
413
414* Patch by Richard Woodruff, 8 Aug 2003:
415 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
416
wdenkd94f92c2003-08-28 09:41:22 +0000417======================================================================
418Changes for U-Boot 0.4.5:
419======================================================================
420
wdenkae3af052003-08-07 22:18:11 +0000421* Update for TQM board defaults:
422 disable clocks_in_mhz, enable boot count limit
423
dzu9374fa22003-08-07 15:04:48 +0000424* Removed tools/gdb from "make all" target. Added make target "gdbtools"
425 in toplevel directory instead. Removed astest.c from tools/gdb because
426 it is no longer relevant.
427
wdenk96e48cf2003-08-05 18:22:44 +0000428* Fix PCI support for MPC5200 / IceCube Board
429
wdenkbdccc4f2003-08-05 17:43:17 +0000430* Map ISP1362 USB OTG controller for NSCU board
431
432* Patch by Brad Parker, 02 Aug 2003:
433 fix sc520_cdp problems
434
435* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
436
437* Allow erase command to cross flash bank boundaries
438
wdenk1f4bb372003-07-27 00:21:01 +0000439* Patch by Scott McNutt, 21 Jul 2003:
440 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
441 Both LynxOS and BlueCat linux KDIs are supported.
442
443* Patch by Richard Woodruff, 25 Jul 2003:
444 use more reliable reset for OMAP/925T
445
446* Patch by Nye Liu, 25 Jul 2003:
447 fix typo in mpc8xx.h
448
449* Patch by Richard Woodruff, 24 Jul 2003:
450 Fixes for cmd_nand.c:
451 - Fixed null dereferece which could result in incorrect ECC values.
452 - Added support for devices with no Ready/Busy signal hooked up.
453 - Added OMAP1510 read/write protect handling.
454 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
455 for non-JFFS2.
456 - Switched default ECC to be JFFS2.
457
wdenk77846742003-07-26 08:08:08 +0000458* Allow crc32 to be used at address 0x000
459
460* Provide consistent interface to standalone applications to access
461 the 'global_data' structure
462 Provide a doc/README.standalone more useful to users/developers.
463
464* Make IceCube MGT5100 FEC driver work
465
wdenk27b207f2003-07-24 23:38:38 +0000466* Implement new mechanism to export U-Boot's functions to standalone
467 applications: instead of using (PPC-specific) system calls we now
468 use a jump table; please see doc/README.standalone for details
469
470* Patch by Dave Westwood, 24 Jul 2003:
471 added support for Unity OS (a proprietary OS)
472
473* Patch by Detlev Zundel, 23 Jul 2003:
474 add "imls" command to print flash table of contents
475
476* Fix cold boot detection for log buffer reset
477
478* Return error for invalid length specifiers with "cp.X" etc.
479
480* Fix startup problem on MIPS
481
482* Allow for CONFIG_SPLASH_SCREEN even when no explicit
483 bitmap support is configured
484
485* Patch by Bill Hargen, 18 Jul 2003:
486 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
487
488* Patch by Denis Peter, 18 Jul 2003:
489 - fix memory configuration for MIP405T
490 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
491
492* Cleanup of TQM82xx configurations; use "official" board types
493 to make selection easier.
494
wdenk2535d602003-07-17 23:16:40 +0000495* Patch by Martin Krause, 17 Jul 2003:
496 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
497
498* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +0000499 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +0000500
501* Patch by Nye Liu, 16 July 2003:
502 MPC860FADS fixes:
503 - add MPC86xADS support (uses MPC86xADS.h)
504 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
505 o PLPRCR changes
506 o BRG changes (EXTAL/XTAL restricted to 10MHz)
507 o don't trust gclk() software measurement by default, depend on
508 CONFIG_8xx_GCLK_FREQ
509 - add DRAM SIMM not installed detection
510 - use more "correct" SDRAM initialization sequence
511 - allow different SDRAM sizes (8xxADS has 8M)
512 - default DER is 0
513 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
514 - rename MAMR/MBMR defines to be more consistent. Should eventually
515 be merged into MxMR to better reflect the PowerQUICC datasheet.
516
517* Patch by Yuli Barcohen, 16 Jul 2003:
518 support new Motorola PQ2FADS-ZU evaluation board which replaced
519 MPC8260ADS and MPC8266ADS
520
521======================================================================
wdenk945af8d2003-07-16 21:53:01 +0000522Changes for U-Boot 0.4.4:
523======================================================================
524
525* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
526
527* Add support for MGT5100 and MPC5200 processors
528
529* Patch by Lutz Dennig, 15 Jul 2003:
530 update for R360MPI board
531
532======================================================================
wdenk8564acf2003-07-14 22:13:32 +0000533Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +0000534======================================================================
535
wdenk2e5983d2003-07-15 20:04:06 +0000536* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +0000537 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +0000538 - added support for TI OMAP 1510 Innovator Board
539
wdenk6dff5522003-07-15 07:45:49 +0000540* Patches by Martin Krause, 14 Jul 2003:
541 - add I2C support for s3c2400 systems (trab board)
542 - (re-) add "ping" to command table
543
544* Fix handling of "slow" POST routines
545
wdenk8564acf2003-07-14 22:13:32 +0000546* Patches by Yuli Barcohen, 13 Jul 2003:
547 - Correct flash and JFFS2 support for MPC8260ADS
548 - fix PVR values and clock generation for PowerQUICC II family
549 (8270/8275/8280)
550
551* Patch by Bernhard Kuhn, 08 Jul 2003:
552 - add support for M68K targets
553
554* Patch by Ken Chou, 3 Jul:
555 - Fix PCI config table for A3000
556 - Fix iobase for natsemi.c
557 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +0000558
wdenk8564acf2003-07-14 22:13:32 +0000559* Allow to enable "slow" POST routines by key press on power-on
560* Fix temperature dependend switching of LCD backlight on LWMON
561* Tweak output format for LWMON
562
stroese57029232003-07-11 08:23:12 +0000563* Patch by Stefan Roese, 11 Jul 2003:
564 - Fix bug in CONFIG_VERSION_VARIABLE.
565 - AR405 config updated.
566 - OCRTC/ORSG: bsp command added.
567 - ASH405 bsp update.
568
wdenk8564acf2003-07-14 22:13:32 +0000569======================================================================
570Changes for U-Boot 0.4.2:
571======================================================================
572
wdenkf12e5682003-07-07 20:07:54 +0000573* Add support for NSCU board
574
575* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
576
577* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
578 mirror bit flash on TQM8xxM modules
579
wdenk0d498392003-07-01 21:06:45 +0000580* Patch by Kenneth Johansson, 30 Jun 2003:
581 get rid of MK_CMD_ENTRY macro; update doc/README.command
582
wdenkb37c7e52003-06-30 16:24:52 +0000583* Patch by Seb James, 30 Jun 2003:
584 Improve documentation of I2C configuration in README
585
586* Fix problems with previous log buffer "fixes"
587
588* Fix minor help text issues
589
590* "log append" did not append a newline
591
592======================================================================
wdenkb0fce992003-06-29 21:03:46 +0000593Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +0000594======================================================================
595
wdenkb0fce992003-06-29 21:03:46 +0000596* Fix some missing commands, cleanup header files
597 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
598
wdenk9d2b18a2003-06-28 23:11:04 +0000599* Rewrite command lookup and help command (fix problems with bubble
600 sort when sorting command name list). Minor cleanup here and there.
601
wdenkd1cbe852003-06-28 17:24:46 +0000602* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
603 - Allow to call sysmon function interactively
604 - PIC on LWMON board needs delay after power-on
605 - Add missing RSR definitions for MPC8xx
606 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +0000607 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +0000608 - Add support for SL8245 board
609
wdenk8bde7f72003-06-27 21:31:46 +0000610* Code cleanup:
611 - remove trailing white space, trailing empty lines, C++ comments, etc.
612 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
613
614* Patches by Kenneth Johansson, 25 Jun 2003:
615 - major rework of command structure
616 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
617
618======================================================================
619Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +0000620======================================================================
621
wdenk993cad92003-06-26 22:04:09 +0000622* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +0000623 - csb226 configuration updated
624 - credits for logodl port updated
625 - innokom configuration updated
626 - logodl tree update, still with coding style inconsistencies
627 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +0000628
629* Patch by Pantelis Antoniou, 25 Jun 2003:
630 update NetVia with V2 board support
631
wdenkb783eda2003-06-25 22:26:29 +0000632* Header file cleanup for ARM
633
634* Patch by Murray Jensen, 24 Jun 2003:
635 - make sure to use only U-boot provided header files
636 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
637
stroesea300d832003-06-24 14:32:24 +0000638* Patch by Stefan Roese, 24 Jun 2003:
639 - Update esd ASH405 board files.
640 - Update esd DASA_SIM config file.
641 - Add ping command to some esd boards.
642
wdenkcceb8712003-06-23 18:12:28 +0000643* Patch by Yuli Barcohen, 23 Jun 2003:
644 Update for MPC8260ADS board
645
646* Patch by Murray Jensen, 23 Jun 2003:
647 - cleanup of GCC 3.x compiler warnings
648
wdenk3595ac42003-06-22 17:18:28 +0000649* Patch by Rune Torgersen, 4 Jun 2003:
650 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +0000651
wdenk3595ac42003-06-22 17:18:28 +0000652* Patch by Richard Woodruff, 19 June 03:
653 - Enabled standard u-boot device abstraction for ARM
654 - Enabled console device for ARM
655 - Initilized bi_baudrate for ARM
656
657* Patch by Bill Hargen, 23 Apr 2003:
658 fix byte order for 824x I2C addresses (write op)
659
wdenk592c5ca2003-06-21 00:17:24 +0000660* Patch by Murray Jensen, 20 Jun 2003:
661 - hymod update
662 - cleanup (especially for gcc-3.x compilers)
663
wdenk72755c72003-06-20 23:10:58 +0000664* Patch by Tom Guilliams, 20 Jun 2003:
665 added CONFIG_750FX support for IBM 750FX processors
666
wdenk03329902003-06-20 22:36:30 +0000667* Patch by Devin Crumb, 02 Apr 2003:
668 Fix clock divider rounding problem in drivers/serial.c
669
670* Patch by Richard Woodruff, 19 June 03:
671 - Fixed smc91c111 driver to sync with the u-boot environment
672 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +0000673 - Added eth_init error return check in NetLoop (net/net.c).
674
wdenk03329902003-06-20 22:36:30 +0000675* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +0000676 Added support for A3000 SBC board (Artis Microsystems Inc.)
677
wdenk6dd652f2003-06-19 23:40:20 +0000678* Patches by Murray Jensen, 17 Jun 2003:
679 - Hymod board database mods: add "who" field and new xilinx chip types
680 - provide new "init_cmd_timeout()" function so code external to
681 "common/main.c" can use the "reset_cmd_timeout()" function before
682 entering the main loop
683 - add DTT support for adm1021 (new file dtt/adm1021.c; config
684 slightly different. see include/configs/hymod.h for an example
685 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
686 CFG_DTT_ADM1021 defined)
687 - add new "eeprom_probe()" function which has similar args and
688 behaves in a similar way to "eeprom_read()" etc.
689 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
690 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
691 - gdbtools copyright update
692 - ensure that set_msr() executes the "sync" and "isync" instructions
693 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
694 - 8260 I/O ports fix: Open Drain should be set last when configuring
695 - add SIU IRQ defines for 8260
696 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
697 config.mk to allow board configurations to override the GNU
698 linker script, selected via the LDSCRIPT, make variable, and to
699 give an initial value to the OBJCFLAGS make variable
700 - 8260 i2c enhancement:
701 o correctly extends the timeout depending on the size of all
702 queued messages for both transmit and receive
703 o will not continue with receive if transmit times out
704 o ensures that the error callback is done for all queued tx
705 and rx messages
706 o correctly detects both tx and rx timeouts, only delivers one to
707 the callback, and does not overwrite an earlier error
708 o logic in i2c_probe now correct
709 - add "vprintf()" function so that "panic()" function can be
710 technically correct
711 - many Hymod board changes
712
wdenk52f52c12003-06-19 23:04:19 +0000713* Patches by Robert Schwebel, 14 Jun 2003:
714 - add support for Logotronic DL datalogger board
715 - cleanup serial line after kermit binary download
716 - add debugX macro (debug level support)
717 - update mach-types.h to latest arm.linux.org.uk master list.
718
wdenk48b42612003-06-19 23:01:32 +0000719* Patches by David Müller, 12 Jun 2003:
720 - rewrite of the S3C24X0 register definitions stuff
721 - "driver" for the built-in S3C24X0 RTC
722
723* Patches by Yuli Barcohen, 12 Jun 2003:
724 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
725 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
726 configuration word supplied by FPGA on some MPC8260ADS boards
727
728* Patch by Pantelis Antoniou, 10 Jun 2003:
729 Unify status LED interface
730
wdenk15ef8a52003-06-18 20:22:24 +0000731* Add support for DS12887 RTC; add RTC support for ATC board
732
wdenk2abbe072003-06-16 23:50:08 +0000733* Patch by Nicolas Lacressonniere, 11 Jun 2003:
734 Modifications for Atmel AT91RM9200DK ARM920T based development kit
735 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +0000736 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +0000737 - Add Flash detection on Atmel AT91RM9200DK
738 (between Atmel AT49BV1614 and AT49BV1614A flashes)
739 - Replace old Ethernet PHY layer functions
740 - Change link address
741
742* Patch by Frank Smith, 9 Jun 2003:
743 use CRIT_EXCEPTION for machine check on 4xx
744
745* Patch by Detlev Zundel, 13 Jun 2003:
746 added implementation of the "carinfo" command in cmd_immap.c
747
wdenk71f95112003-06-15 22:40:42 +0000748* Fix CONFIG_NET_MULTI support in include/net.h
749
750* Patches by Kyle Harris, 13 Mar 2003:
751 - Add FAT partition support
752 - Add command support for FAT
753 - Add command support for MMC
754 ----
755 - Add Intel PXA support for video
756 - Add Intel PXA support for MMC
757 ----
758 - Enable MMC and FAT for lubbock board
759 - Other misc changes for lubbock board
760
wdenk487778b2003-06-06 11:20:01 +0000761* Patch by Robert Schwebel, April 02, 2003:
762 fix for SMSC91111 driver
763
wdenka3ed3992003-06-05 19:37:36 +0000764* Patch by Vladimir Gurevich, 04 Jun 2003:
765 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
766
stroese08eaea92003-06-05 15:44:37 +0000767* Patch by Stefan Roese, 05 Jun 2003:
768 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
769 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
770 data cache can be used even if the chip select is in use.
771 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
772 (see README for further description).
773 - Changed config files of CONFIG_EEPRO100 boards to use the
774 CFG_RX_ETH_BUFFER define.
775
wdenk73a8b272003-06-05 19:27:42 +0000776* Add support for RMU board
777
778* Add support for TQM862L at 100/50 MHz
779
780* Patch by Pantelis Antoniou, 02 Jun 2003:
781 major reconstruction of networking code;
782 add "ping" support (outgoing only!)
783
wdenkf3e0de62003-06-04 15:05:30 +0000784* Patch by Denis Peter, 04 June 2003:
785 add support for the MIP405T board
786
wdenk682011f2003-06-03 23:54:09 +0000787* Patches by Udi Finkelstein, 2 June 2003:
788 - Added support for custom keyboards, initialized by defining a
789 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
790 - Added support for the RBC823 board.
791 - cpu/mpc8xx/lcd.c now automatically calculates the
792 Horizontal Pixel Count field.
793
794* Fix alignment problem in BOOTP (dhcp_leasetime option)
795 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
796
797* Patch by Mark Rakes, 14 May 2003:
798 add support for Intel e1000 gig cards.
799
800* Patch by Nye Liu, 3 Jun 2003:
801 fix critical typo in MAMR definition (include/mpc8xx.h)
802
803* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
804
805* Patch by Klaus Heydeck, 2 Jun 2003
806 Minor changes for KUP4K configuration
807
wdenk7a8e9bed2003-05-31 18:35:21 +0000808* Patch by Marc Singer, 29 May 2003:
809 Fixed rarp boot method for IA32 and other little-endian CPUs.
810
811* Patch by Marc Singer, 28 May 2003:
812 Added port I/O commands.
813
814* Patch by Matthew McClintock, 28 May 2003
815 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
816 - minor patches for utx8245
817
818* Patch by Daniel Engström, 28 May 2003:
819 x86 update
820
821* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
822 add nand flash support to SXNI855T configuration
823 fix/extend nand flash support:
824 - fix 'nand erase' command so does not erase bad blocks
825 - fix 'nand write' command so does not write to bad blocks
826 - fix nand_probe() so handles no flash detected properly
827 - add doc/README.nand
828 - add .jffs2 and .oob options to nand read/write
829 - add 'nand bad' command to list bad blocks
830 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
831 - make NAND read/write faster
832
833* Patch by Rune Torgersen, 23 May 2003:
834 Update for MPC8266ADS board
835
wdenk3b57fe02003-05-30 12:48:29 +0000836* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
837 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
838 _time_ (!) if the environment is embedded within the U-Boot image,
839 or in a separate flash sector.
840
841* Cleanup CFG_DER #defines in config files (wd maintained only)
842
wdenkf07771c2003-05-28 08:06:31 +0000843* Fix data abort exception handling for arm920t CPU
844
845* Fix alignment problems with flash driver for TRAB board
846
847* Patch by Donald White, 21 May 2003:
848 fix calculation of base address in pci_hose_config_device()
849
850* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
851 execute "cmd2", even if "cmd1" fails. Note that this is different
852 to "run var1 var2" where the contents of "var2" will NOT be
853 executed when a command in "var1" fails.
854
wdenk38b99262003-05-23 23:18:21 +0000855* Add zero-copy ramdisk support (requires corresponding kernel support!)
856
wdenk4c3b21a2003-05-23 12:36:20 +0000857* Patch by Kyle Harris, 20 May 2003:
858 In preparation for an ixp port, rename cpu/xscale and arch-xscale
859 into cpu/pxa and arch-pxa.
860
stroesed9ff6e82003-05-23 11:49:24 +0000861* Patch by Stefan Roese, 23 May 2003:
862 - IBM PPC405EP port added.
863 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
864 UART0) is used as default U-Boot console. PPC4xx only!
865 - esd ASH405 board added (PPC405EP based).
866 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
867 - esd CPCI405AB board added.
868 - esd PMC405 board added.
869 - Update of some esd boards.
870
wdenk33149b82003-05-23 11:38:58 +0000871* Patch by Denis Peter, 19 Mai 2003:
872 add support for the MIP405-3 board
873
wdenk5d232d02003-05-22 22:52:13 +0000874* Patch by Dave Ellis, 22 May 2003:
875 Fix problem with only partially cleared .bss segment
876
877* Patch by Rune Torgersen, 12 May 2003:
878 get PCI to work on a MPC8266ADS board; incorporate change to
879 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
880
881* Patch by Nye Liu, 1 May 2003:
882 minor patches for the FADS8xx
883
884* Patch by Thomas Schäfer, 28 Apr 2003:
885 Fix SPD handling for 256 ECC DIMM on Walnut
886
wdenkc8c3a8b2003-05-21 20:26:20 +0000887* Add support for arbitrary bitmaps for TRAB's VFD command;
888 allow to pass boot bitmap addresses in environment variables;
889 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +0000890
891* Patch by Christian Geißinger, 19 May 2002:
892 On TRAB: wait until the dummy byte has been completely sent
893
wdenk7f70e852003-05-20 14:25:27 +0000894* Patch by David Updegraff, 22 Apr 2003:
895 update for CrayL1 board
896
897* Patch by Pantelis Antoniou, 21 Apr 2003:
898 add boot support for ARTOS (a proprietary OS)
899
900* Patch by Steven Scholz, 11 Apr 2003:
901 Add support for RTC DS1338
902
903* Patch by Rod Boyce, 24 Jan 2003:
904 Fix counting of extended partitions in diskboot command
905
wdenk59de2ed2003-05-20 10:58:04 +0000906* Patch by Christophe Lindheimer, 20 May 2003:
907 allow the use of CFG_LOADS when CFG_NO_FLASH is set
908
wdenk86d82762003-05-20 10:39:44 +0000909* Fix SDRAM timing on Purple board
910
wdenk66fd3d12003-05-18 11:30:09 +0000911* Add support for CompactFlash on ATC board
912 (includes support for Intel 82365 and compatible PC Card controllers,
913 and Yenta-compatible PCI-to-CardBus controllers)
914
wdenk45219c42003-05-12 21:50:16 +0000915* Patch by Mathijs Haarman, 08 May 2003:
916 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
917
wdenk9c62cc52003-05-03 23:33:47 +0000918* Fix problem with usage of "true" (undefined in current versions of bfd.h)
919
wdenk7aa78612003-05-03 15:50:43 +0000920* Add support for Promess ATC board
921
922* Patch by Keith Outwater, 28 Apr 2003:
923 - Miscellaneous corrections and additions to GEN860T board specific code.
924 - Added GEN860_SC variant to GEN860T.
925 - Miscellaneous corrections to GEN860T documentation.
926 - Correct duplicate entry in U-Boot CREDITS file.
927 - Add GEN860T_SC entry in MAINTAINERS file.
928 - Update CREDITS file with GEN860T_SC info.
929
930* Update Smiths Aerospace addresses in MAINTAINERS file
931
932* Fix error handling in hush's version of "run" command
933
wdenk4532cb62003-04-27 22:52:51 +0000934* LWMON extensions:
935 - Splashscreen support
936 - modem support
937 - sysmon support
938 - temperature dependend enabling of LCD
939
940* Allow booting from old "PPCBoot" disk partitions
941
942* Add support for TQM8255 Board / MPC8255 CPU
943
944======================================================================
wdenk02c9bed2003-04-20 17:41:25 +0000945Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +0000946======================================================================
947
wdenkd791b1d2003-04-20 14:04:18 +0000948* Make sure Block Lock Bits get cleared in R360MPI flash driver
949
950* MPC823 LCD driver: Fill color map backwards, to allow for steady
951 display when Linux takes over
952
953* Patch by Erwin Rol, 27 Feb 2003:
954 Add support for RTEMS (this time for real).
955
956* Add support for "bmp info" and "bmp display" commands to load
957 bitmap images; this can be used (for example in a "preboot"
958 command) to display a splash screen very quickly after poweron.
959
960* Add support for 133 MHz clock on INCA-IP board
961
wdenk4a6fd342003-04-12 23:38:12 +0000962* Patch by Lutz Dennig, 10 Apr 2003:
963 Update for R360MPI board
964
965* Add new meaning to "autostart" environment variable:
966 If set to "no", a standalone image passed to the
967 "bootm" command will be copied to the load address
968 (and eventually uncompressed), but NOT be started.
969 This can be used to load and uncompress arbitrary
970 data.
971
stroese69f8f8272003-04-10 13:30:28 +0000972* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +0000973 Changed DHCP client to use IP address from server option field #54
974 from the OFFER packet in the server option field #54 in the REQUEST
975 packet. This fixes a problem using a Windows 2000 DHCP server,
976 where the DHCP-server is not the TFTP-server.
977
978* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +0000979
wdenkd126bfb2003-04-10 11:18:18 +0000980* Add support for TQM862L modules
981
982======================================================================
wdenk60fbe252003-04-08 23:25:21 +0000983Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +0000984======================================================================
985
wdenk3e386912003-04-05 00:53:31 +0000986* Patch by Arun Dharankar, 4 Apr 2003:
987 Add IDMA example code (tested on 8260 only)
988
989* Add support for Purple Board (MIPS64 5Kc)
990
991* Add support for MIPS64 5Kc CPUs
992
993* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
994
995* Patch by Denis Peter, 04 Apr 2003:
996 - update MIP405-4 board
997
stroese36c05a82003-04-04 16:55:30 +0000998* Patch by Stefan Roese, 4 Apr 2003:
999 - U-Boot version environment variable "ver" added
1000 (CONFIG_VERSION_VARIABLE).
1001 - Changed PPC405GPr version from A to B.
1002 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
1003
wdenk3e386912003-04-05 00:53:31 +00001004* Patches by Denis Peter, 03 April 2003:
1005 - fix PCI IRQs on MPL boards
1006 - fix two more un-relocated pointer problems
1007
1008* Fix behaviour of "run" command:
1009 - print error message iv variable does not exist
1010 - terminate processing of arguments in case of error
1011
1012* Patches by Peter Figuli, 10 Mar 2003
1013 - Add support for BTUART on PXA platform
1014 - Add support for WEP EP250 (PXA) board
1015
1016* Fix flash problems on INCA-IP; add tool to allow bruning images to
1017 flash using a BDI2000
1018
1019* Implement fix for I2C Edge Conditions problem for all boards that
1020 use the bit-banging driver (common/soft_i2c.c)
1021
wdenk0db5bca2003-03-31 17:27:09 +00001022* Patch by Martin Winistoerfer, 23 Mar 2003
1023 - Add port to MPC555/556 microcontrollers
1024 - Add support for cmi customer board with
1025 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
1026
1027* Patch by Rick Bronson, 28 Mar 2003:
1028 - fix common/cmd_nand.c
1029
wdenk85ec0bc2003-03-31 16:34:49 +00001030* Patch by Arun Dharankar, 24 Mar 2003:
1031 - add threads / scheduler example code
1032
1033* Add patches by Robert Schwebel, 31 Mar 2003:
1034 - add ctrl-c support for kermit download
1035 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00001036 - csb226 board: bring in sync with innokom/memsetup.S
1037 - csb226 board: fix MDREFR handling
1038 - misc doc fixes / extensions
1039 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
1040 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00001041
stroese36c05a82003-04-04 16:55:30 +00001042* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00001043
wdenk506f0442003-03-28 14:40:36 +00001044* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
1045 - fix SRAM and SDRAM memory sizing
1046 - add status LED support
1047 - add MAC address for second (SCC1) ethernet port
1048
1049* Update default environment for TQM8260 board
1050
wdenkdc7c9a12003-03-26 06:55:25 +00001051* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00001052 - Add NAND flash support for reading, writing, and erasing NAND
1053 flash (certain forms of which are called SmartMedia).
1054 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00001055
1056* Patches by Robert Schwebel, 19 Mar 2003:
1057 - use arm-linux-gcc as default compiler for ARM
1058 - fix i2c fixup code
1059 - fix missing baudrate setting
1060 - added $loadaddr / CFG_LOAD_ADDR support to loadb
1061 - moved "ignoring trailing characters" _before_ u-boot wants to
1062 print out diagnostics messages; removes bogus characters at the
1063 end of transmission
1064
1065* Patch by John Zhan, 18 Mar 2003:
1066 Add support for SinoVee Microsystems SC8xx boards
1067
1068* Patch by Rolf Offermanns, 21 Mar 2003:
1069 ported the dnp1110 related changes from the current armboot cvs to
1070 current u-boot cvs. smc91111 does not work. problem marked in
1071 smc91111.c, grep for "FIXME".
1072
1073* Patch by Brian Auld, 25 Mar 2003:
1074 Add support for STM flash chips on ebony board
1075
wdenk4d75a502003-03-25 16:50:56 +00001076* Add PCI support for MPC8250 Boards (PM825 module)
1077
stroese44e5c5c2003-03-25 14:44:48 +00001078* Patch by Stefan Roese, 25 Mar 2003:
1079 - PCI405 update.
1080
stroese5d5d44e2003-03-20 15:32:59 +00001081* Patch by Stefan Roese, 20 Mar 2003:
1082 - CPCI4052 update (support for revision 3).
1083 - Set edge conditioning circuitry on PPC405GPr for compatibility
1084 to existing PPC405GP designs.
1085 - Clip udiv to 5 bits on PPC405 (serial.c).
1086
wdenkc0218802003-03-27 12:09:35 +00001087* Extend INCAIP board support:
1088 - add automatic RAM size detection
1089 - add "bdinfo" command
1090 - pass flash address and size to Linux kernel
1091 - switch to 150 MHz clock
1092
wdenk06d01db2003-03-14 20:47:52 +00001093* Avoid flicker on the TRAB's VFD by synchronizing the enable with
1094 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
1095 boards, version 153 for Rev. 200 boards).
1096
1097* Patch by Vladimir Gurevich, 12 Mar 2003:
1098 Fix relocation problem of statically initialized string pointers
1099 in common/cmd_pci.c
1100
1101* Patch by Kai-Uwe Blöm, 12 Mar 2003:
1102 Cleanup & bug fixes for JFFS2 code:
1103 - the memory mangement was broken. It caused havoc on malloc by
1104 writing beyond the block boundaries.
1105 - the length calculation for files was wrong, sometimes resulting
1106 in short file reads.
1107 - data copying now optionally takes fragment version numbers into
1108 account, to avoid copying from older data.
1109 See doc/README.JFFS2 for details.
1110
wdenk3bac3512003-03-12 10:41:04 +00001111* Patch by Josef Wagner, 12 Mar 2003:
1112 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
1113 - ETH05 and BEDBUG support for CU824
1114 - added support for MicroSys CPC45
1115 - new BOOTROM/FLASH0 and DOC base for PM826
1116
1117* Patch by Robert Schwebel, 12 Mar 2003:
1118 Fix the chpart command on innokom board
1119
1120* Name cleanup:
1121 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
1122 s/PPCBoot/U-Boot/ in some files
1123 s/pImage/uImage/ in some files
1124
1125* Patch by Detlev Zundel, 15 Jan 2003:
1126 Fix '' command line quoting
1127
1128* Patch by The LEOX team, 19 Jan 2003:
1129 - add support for the ELPT860 board
1130 - add support for Dallas ds164x RTC
1131
wdenk1cb8e982003-03-06 21:55:29 +00001132* Patches by David Müller, 31 Jan 2003:
1133 - minimal setup for CardBus bridges
1134 - add EEPROM read/write support in the CS8900 driver
1135 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00001136 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00001137
1138* Patch by Steven Scholz, 04 Feb 2003:
1139 add support for RTC DS1307
1140
1141* Patch by Reinhard Meyer, 5 Feb 2003:
1142 fix PLPRCR/SCCR init sequence on 8xx to allow for
1143 changes of EBDF by software
1144
1145* Patch by Vladimir Gurevich, 07 Feb 2003:
1146 "API-compatibility patch" for 4xx I2C driver
1147
1148* TRAB fixes / extensions:
1149 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00001150 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00001151 - make sure both buzzers are turned off (drive low level)
1152
wdenk47cd00f2003-03-06 13:39:27 +00001153* Patches by Robert Schwebel, 06 Mar 2003:
1154 - fix bug in BOOTP code (must use NetCopyIP)
1155 - update of CSB226 port
1156 - clear BSS segment on XScale
1157 - added support for i2c_init_board() function
1158 - update to the Innokom plattform
1159
1160* Extend support for redundand environments for configurations where
1161 environment size < sector size
1162
wdenkdb2f721f2003-03-06 00:58:30 +00001163* Patch by Rune Torgersen, 13 Feb 2003:
1164 Add support for Motorola MPC8266ADS board
1165
1166* Patch by Kyle Harris, 19 Feb 2003:
1167 patches for the Intel lubbock board:
1168 memsetup.S - general cleanup (based on Robert's csb226 code)
1169 flash.c - overhaul, actually works now
1170 lubbock.c - fix init funcs to return proper value
1171
1172* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00001173 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00001174 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00001175 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00001176 - Takes function pointer to function for reading the spd_nvram. Usefull
1177 for faking data or hardcode a module without the nvram.
1178 - fix other user for above change
1179 - fix some comments.
1180
1181* Patches by Brian Waite, 26 Feb 2003:
1182 - fix port for evb64260 board
1183 - fix PCI for evb64260 board
1184 - fix PCI scan
1185
1186* Patch by Reinhard Meyer, 1 Mar 2003:
1187 Add support for EMK TOP860 Module
1188
1189* Patch by Yuli Barcohen, 02 Mar 2003:
1190 Add SPD EEPROM support for MPC8260ADS board
1191
wdenk43d96162003-03-06 00:02:04 +00001192* Patch by Robert Schwebel, 21 Jan 2003:
1193 - Add support for Innokom board
1194 - Don't complain if "install" fails
1195 - README cleanup (remove duplicated lines)
1196 - Update PXA header files
1197
1198* Add documentation for existing POST code (doc/README.POST)
1199
1200* Patch by Laudney Ren, 15 Jan 2003:
1201 Fix handling of redundand environment in "tools/envcrc.c"
1202
1203* Patch by Detlev Zundel, 28 Feb 2003:
1204 Add bedbug support for 824x systems
1205
1206* Add support for 16 MB flash configuration of TRAB board
1207
1208* Patch by Erwin Rol, 27 Feb 2003:
1209 Add support for RTEMS
1210
1211* Add image information to README
1212
stroese2a9e02e2003-02-18 11:30:24 +00001213* Patch by Stefan Roese, 18 Feb 2003:
1214 CPCIISER4 configuration updated.
1215
stroesed7787c62003-02-17 16:06:06 +00001216* Patch by Stefan Roese, 17 Feb 2003:
1217 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
1218
stroesead10dd92003-02-14 11:21:23 +00001219* Patch by Stefan Roese, 13 Feb 2003:
1220 Add "pcidelay" environment variable (in ms, enabled via
1221 CONFIG_PCI_BOOTDELAY).
1222 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
1223 RST# to respond to configuration cycles (33MHz -> 1s).
1224
wdenk43d96162003-03-06 00:02:04 +00001225* Fix dual PCMCIA slot support (when running with just one
1226 slot populated)
1227
1228* Add VFD type detection to trab board
1229
1230* extend drivers/cs8900.c driver to synchronize ethaddr environment
1231 variable with value in the EEPROM
1232
stroeseee1b3b52003-02-10 16:39:00 +00001233* Patch by Stefan Roese, 10 Feb 2003:
1234 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
1235
wdenkc0218802003-03-27 12:09:35 +00001236* Add support for MIPS32 4Kc CPUs
1237
1238* Add support for INCA-IP Board
1239
wdenk43d96162003-03-06 00:02:04 +00001240======================================================================
1241Changes for U-Boot 0.2.2:
1242======================================================================
1243
wdenkaacf9a42003-01-17 16:27:01 +00001244* Add dual ethernet support on PM826
1245
1246* Add support for LXT971 PHY on PM826
1247
1248* Patch by Tord Andersson, 16 Jan 2003:
1249 Fix flash sector count for TQM8xxL
1250
1251* Fix I2C EEPROM problem on ICU862 board (would only write the first
1252 16 bytes out of each 32 byte block)
1253
1254======================================================================
1255Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00001256======================================================================
1257
wdenk608c9142003-01-13 23:54:46 +00001258* Add support for V37 board
1259 (patch by Jón Benediktsson, 11 Dec 2002)
1260
wdenkd0fb80c2003-01-11 09:48:40 +00001261* Update baudrate in bd_info when it gets changed
1262
1263* Add watchdog trigger points while waiting for serial port
1264 (so far only 8xx -- needed on LWMON with 100ms watchdog)
1265
1266* Improve command line tool to access the U-Boot's environment
1267 (figuration of the utility, using a config file)
1268
wdenka25f8622003-01-02 23:57:29 +00001269* Add single quote support for (old) command line parser
1270
wdenk288b3d72002-12-20 23:42:25 +00001271* Switch LWMON board default config from FRAM to EEPROM;
1272 in POST, EEPROM shows up on 8 addresses
1273
1274======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00001275Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00001276======================================================================
1277
wdenk6aff3112002-12-17 01:51:00 +00001278* Use 1-byte-read instead of -write for iprobe() function
1279 Add i2c commands to PM826 config
1280
1281* extend I2C POST code: check for list on known addresses
1282
wdenk228f29a2002-12-08 09:53:23 +00001283* Improve log buffer code; use "loglevel" to decide which messages
1284 to log on the console, too (like in Linux); get rid of "logstart"
1285
1286* Add command line tool to access the U-Boot's environment
1287 (board-specific for TRAB now, to be fixed later)
1288
wdenk7c7a23b2002-12-07 00:20:59 +00001289* Patch by Hans-Joerg Frieden, 06 Dec 2002
1290 Fix misc problems with AmigaOne support
1291
1292* Patch by Chris Hallinan, 3 Dec 2002:
1293 minor cleanup to the MPC8245 EPIC driver
1294
1295* Patch by Pierre Aubert , 28 Nov 2002
1296 Add support for external (SIU) interrupts on MPC8xx
1297
1298* Patch by Pierre Aubert , 28 Nov 2002
1299 Fix nested syscalls bug in standalone applications
1300
1301* Patch by David Müller, 27 Nov 2002:
1302 fix output of "pciinfo" command for CardBus bridge devices.
1303
1304* Fix bug in TQM8260 board detection - boards got stuck when board ID
1305 was not readable
1306
wdenk1f53a412002-12-04 23:39:58 +00001307* Add LED indication for IDE activity on KUP4K board
1308
wdenka6c7ad22002-12-03 21:28:10 +00001309* Fix startup problems with VFD display on TRAB
1310
1311* Patch by Pierre Aubert, 20 Nov 2002
1312 Add driver for Epson SED13806 graphic controller.
1313 Add support for BMP logos in cfb_console driver.
1314
wdenkea909b72002-11-21 23:11:29 +00001315* Added support for both PCMCIA slots (at the same time!) on MPC8xx
1316
1317* Patch by Rod Boyce, 21 Nov 2002:
1318 fix PCMCIA on MBX8xx board
1319
1320* Patch by Pierre Aubert , 21 Nov 2002
1321 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
1322 bootmode word in DPRAM configurable
1323
wdenkb2184c32002-11-19 23:01:07 +00001324* Patch by Daniel Engström, 18 Nov 2002:
1325 Fixes for x86 port (mostly strings issues)
1326
1327* Patch by Ken Chou, 18 Nov 2002:
1328 Fix for natsemi NIC cards (DP83815)
1329
1330* Patch by Pierre Aubert, 19 Nov 2002:
1331 fix a bug for the MII configuration, and some warnings
1332
wdenkc7de8292002-11-19 11:04:11 +00001333* Patch by Thomas Frieden, 13 Nov 2002:
1334 Add code for AmigaOne board
1335 (preliminary merge to U-Boot, still WIP)
1336
1337* Patch by Jon Diekema, 12 Nov 2002:
1338 - Adding URL for IEEE OUI lookup
1339 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
1340 being defined.
1341 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
1342 root-on-nfs macros are designed to switch how the default boot
1343 method gets defined.
1344
wdenk2262cfe2002-11-18 00:14:45 +00001345* Patch by Daniel Engström, 13 Nov 2002:
1346 Add support for i386 architecture and AMD SC520 board
1347
1348* Patch by Pierre Aubert, 12 Nov 2002:
1349 Add support for DOS filesystem and booting from DOS floppy disk
1350
wdenk1d0350e2002-11-11 21:14:20 +00001351* Patch by Jim Sandoz, 07 Nov 2002:
1352 Increase number of network RX buffers (PKTBUFSRX in
1353 "include/net.h") for EEPRO100 based boards (especially SP8240)
1354 which showed "Receiver is not ready" errors when U-Boot was
1355 processing the receive buffers slower than the network controller
1356 was filling them.
1357
wdenkeb9401e2002-11-11 02:11:37 +00001358* Patch by Andreas Oberritter, 09 Nov 2002:
1359 Change behaviour of NetLoop(): return -1 for errors, filesize
1360 otherwise; return code 0 is valid an means no file loaded - in this
1361 case the environment still gets updated!
1362
1363* Patches by Jon Diekema, 9 Nov 2002:
1364 - improve ADC/DAC clocking on the SACSng board to align
1365 the failing edges of LRCLK and SCLK
1366 - sbc8260 configuration tweaks
1367 - add status LED support for 82xx systems
1368 - wire sspi/sspo commands into command handler; improved error
1369 handlering
1370 - add timestamp support and alternate memory test to the
1371 SACSng configuration
1372
1373* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00001374 Add "-n" to linker options to get rid of "Not enough room for
1375 program headers" problem
1376
1377* Patch by David Müller, 05 Nov 2002
1378 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
1379 so we can use an already existing name
1380
1381* Patch by Pierre Aubert, 05 Nov 2002
1382 Hardware relatied improvments in FDC boot code
1383
1384* Patch by Holger Schurig, 5 Nov 2002:
1385 Make the PXA really change it's frequency
1386
1387* Patch by Pierre Aubert, 05 Nov 2002
1388 Add support for slave serial Spartan 2 FPGAs
1389
1390* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
1391 drivers
1392
wdenk56f94be2002-11-05 16:35:14 +00001393* Add support for log buffer which can be passed to Linux kernel's
1394 syslog mechanism; used especially for POST results.
1395
1396* Patch by Klaus Heydeck, 31 Oct 2002:
1397 Add initial support for kup4k board
1398
wdenk384ae022002-11-05 00:17:55 +00001399* Patch by Robert Schwebel, 04 Nov 2002:
1400 - use watchdog to reset PXA250 systems
1401 - added progress callbacks to (some of the) ARM code
1402 - update for Cogent CSB226 board
1403
1404* Add support for FPS860 board
1405
wdenke95b61c2002-11-04 16:02:40 +00001406* Patch by Guillaume Alexandre,, 04 Nov 2002:
1407 Improve PCI access on 32-bits Compact PCI bus
1408
wdenk24ee89b2002-11-03 17:56:27 +00001409* Fix mdelay() on TRAB - this was still the debugging version with
1410 seconds instead of ms.
1411
1412* Patch by Robert Schwebel, 1 Nov 2002:
1413 XScale related cleanup (affects all ARM boards)
1414
1415* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00001416
1417======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00001418Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00001419======================================================================
1420
1421This is the initial version of "Das U-Boot", the Universal Boot Loader.
1422
1423It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
1424For information about the history of the project please see the
1425PPCBoot project page at http://sourceforge.net/projects/ppcboot
1426
1427======================================================================