blob: 6c1181e6dacfd21d6281ae68b009ed423a985c2f [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Marek Behúnb6ee8602017-06-09 19:28:45 +02002/*
3 * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
4 * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
Marek Behúnb6ee8602017-06-09 19:28:45 +02005 */
6
7#ifndef _CONFIG_TURRIS_OMNIA_H
8#define _CONFIG_TURRIS_OMNIA_H
9
10/*
11 * High Level Configuration Options (easy to change)
12 */
13
Marek Behúnb6ee8602017-06-09 19:28:45 +020014/*
15 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
16 * for DDR ECC byte filling in the SPL before loading the main
17 * U-Boot into it.
18 */
Marek Behúnb6ee8602017-06-09 19:28:45 +020019#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
20
21/*
22 * Commands configuration
23 */
Marek Behúnb6ee8602017-06-09 19:28:45 +020024
25/* I2C support */
26#define CONFIG_DM_I2C
27#define CONFIG_I2C_MUX
28#define CONFIG_I2C_MUX_PCA954x
29#define CONFIG_SPL_I2C_MUX
30#define CONFIG_SYS_I2C_MVTWSI
31
32/* Watchdog support */
33#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
34# define CONFIG_WATCHDOG
35#endif
36
37/* SPI NOR flash default params, used by sf commands */
38#define CONFIG_SF_DEFAULT_SPEED 1000000
39#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
Marek Behúnb6ee8602017-06-09 19:28:45 +020040#define CONFIG_SPI_FLASH_SPANSION
41
42/*
43 * SDIO/MMC Card Configuration
44 */
45#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
46
47/*
48 * SATA/SCSI/AHCI configuration
49 */
Marek Behúnb6ee8602017-06-09 19:28:45 +020050#define CONFIG_SCSI_AHCI_PLAT
51#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
52#define CONFIG_SYS_SCSI_MAX_LUN 1
53#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
54 CONFIG_SYS_SCSI_MAX_LUN)
55
Marek Behúnb6ee8602017-06-09 19:28:45 +020056/* USB/EHCI configuration */
57#define CONFIG_EHCI_IS_TDI
58
59/* Environment in SPI NOR flash */
Marek Behúnb6ee8602017-06-09 19:28:45 +020060#define CONFIG_ENV_OFFSET (3*(1 << 18)) /* 768KiB in */
61#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
62#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
63
Marek Behúnb6ee8602017-06-09 19:28:45 +020064#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
65
66/* PCIe support */
67#ifndef CONFIG_SPL_BUILD
Marek Behúnb6ee8602017-06-09 19:28:45 +020068#define CONFIG_PCI_SCAN_SHOW
69#endif
70
Marek Behúnb6ee8602017-06-09 19:28:45 +020071/* Keep device tree and initrd in lower memory so the kernel can access them */
72#define RELOCATION_LIMITS_ENV_SETTINGS \
73 "fdt_high=0x10000000\0" \
74 "initrd_high=0x10000000\0"
75
76/* Defines for SPL */
Marek Behúnb6ee8602017-06-09 19:28:45 +020077#define CONFIG_SPL_SIZE (140 << 10)
Marek Behúnb6ee8602017-06-09 19:28:45 +020078#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
79
80#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
81#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
82
83#ifdef CONFIG_SPL_BUILD
84#define CONFIG_SYS_MALLOC_SIMPLE
85#endif
86
87#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
88#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
89#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
90
Baruch Siachad105f52018-06-18 21:56:24 +030091#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
Marek Behúnb6ee8602017-06-09 19:28:45 +020092/* SPL related SPI defines */
Marek Behúnb6ee8602017-06-09 19:28:45 +020093# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
94# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
95#endif
96
Baruch Siachad105f52018-06-18 21:56:24 +030097#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
Marek Behúnb6ee8602017-06-09 19:28:45 +020098/* SPL related MMC defines */
99# define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
100# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
101# ifdef CONFIG_SPL_BUILD
102# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
103# endif
104#endif
105
106/*
107 * mv-common.h should be defined after CMD configs since it used them
108 * to enable certain macros
109 */
110#include "mv-common.h"
111
112/* Include the common distro boot environment */
113#ifndef CONFIG_SPL_BUILD
Marek Behúnb6ee8602017-06-09 19:28:45 +0200114
115#ifdef CONFIG_MMC
116#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
117#else
118#define BOOT_TARGET_DEVICES_MMC(func)
119#endif
120
121#ifdef CONFIG_USB_STORAGE
122#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
123#else
124#define BOOT_TARGET_DEVICES_USB(func)
125#endif
126
127#define BOOT_TARGET_DEVICES(func) \
128 BOOT_TARGET_DEVICES_MMC(func) \
129 BOOT_TARGET_DEVICES_USB(func) \
130 func(PXE, pxe, na) \
131 func(DHCP, dhcp, na)
132
133#define KERNEL_ADDR_R __stringify(0x1000000)
134#define FDT_ADDR_R __stringify(0x2000000)
135#define RAMDISK_ADDR_R __stringify(0x2200000)
136#define SCRIPT_ADDR_R __stringify(0x1800000)
137#define PXEFILE_ADDR_R __stringify(0x1900000)
138
139#define LOAD_ADDRESS_ENV_SETTINGS \
140 "kernel_addr_r=" KERNEL_ADDR_R "\0" \
141 "fdt_addr_r=" FDT_ADDR_R "\0" \
142 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
143 "scriptaddr=" SCRIPT_ADDR_R "\0" \
144 "pxefile_addr_r=" PXEFILE_ADDR_R "\0"
145
146#include <config_distro_bootcmd.h>
147
148#define CONFIG_EXTRA_ENV_SETTINGS \
149 RELOCATION_LIMITS_ENV_SETTINGS \
150 LOAD_ADDRESS_ENV_SETTINGS \
151 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
152 "console=ttyS0,115200\0" \
153 BOOTENV
154
155#endif /* CONFIG_SPL_BUILD */
156
157#endif /* _CONFIG_TURRIS_OMNIA_H */