| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz> |
| * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz> |
| */ |
| |
| #ifndef _CONFIG_TURRIS_OMNIA_H |
| #define _CONFIG_TURRIS_OMNIA_H |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| |
| /* |
| * TEXT_BASE needs to be below 16MiB, since this area is scrubbed |
| * for DDR ECC byte filling in the SPL before loading the main |
| * U-Boot into it. |
| */ |
| #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ |
| |
| /* |
| * Commands configuration |
| */ |
| |
| /* I2C support */ |
| #define CONFIG_DM_I2C |
| #define CONFIG_I2C_MUX |
| #define CONFIG_I2C_MUX_PCA954x |
| #define CONFIG_SPL_I2C_MUX |
| #define CONFIG_SYS_I2C_MVTWSI |
| |
| /* Watchdog support */ |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION) |
| # define CONFIG_WATCHDOG |
| #endif |
| |
| /* SPI NOR flash default params, used by sf commands */ |
| #define CONFIG_SF_DEFAULT_SPEED 1000000 |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 |
| #define CONFIG_SPI_FLASH_SPANSION |
| |
| /* |
| * SDIO/MMC Card Configuration |
| */ |
| #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE |
| |
| /* |
| * SATA/SCSI/AHCI configuration |
| */ |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| |
| /* USB/EHCI configuration */ |
| #define CONFIG_EHCI_IS_TDI |
| |
| /* Environment in SPI NOR flash */ |
| #define CONFIG_ENV_OFFSET (3*(1 << 18)) /* 768KiB in */ |
| #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ |
| #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ |
| |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ |
| |
| /* PCIe support */ |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_PCI_SCAN_SHOW |
| #endif |
| |
| /* Keep device tree and initrd in lower memory so the kernel can access them */ |
| #define RELOCATION_LIMITS_ENV_SETTINGS \ |
| "fdt_high=0x10000000\0" \ |
| "initrd_high=0x10000000\0" |
| |
| /* Defines for SPL */ |
| #define CONFIG_SPL_SIZE (140 << 10) |
| #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) |
| |
| #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) |
| #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_MALLOC_SIMPLE |
| #endif |
| |
| #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) |
| #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) |
| #define CONFIG_SPL_DRIVERS_MISC_SUPPORT |
| |
| #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI |
| /* SPL related SPI defines */ |
| # define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 |
| # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS |
| #endif |
| |
| #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC |
| /* SPL related MMC defines */ |
| # define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) |
| # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS |
| # ifdef CONFIG_SPL_BUILD |
| # define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ |
| # endif |
| #endif |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| /* Include the common distro boot environment */ |
| #ifndef CONFIG_SPL_BUILD |
| |
| #ifdef CONFIG_MMC |
| #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) |
| #else |
| #define BOOT_TARGET_DEVICES_MMC(func) |
| #endif |
| |
| #ifdef CONFIG_USB_STORAGE |
| #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) |
| #else |
| #define BOOT_TARGET_DEVICES_USB(func) |
| #endif |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| BOOT_TARGET_DEVICES_MMC(func) \ |
| BOOT_TARGET_DEVICES_USB(func) \ |
| func(PXE, pxe, na) \ |
| func(DHCP, dhcp, na) |
| |
| #define KERNEL_ADDR_R __stringify(0x1000000) |
| #define FDT_ADDR_R __stringify(0x2000000) |
| #define RAMDISK_ADDR_R __stringify(0x2200000) |
| #define SCRIPT_ADDR_R __stringify(0x1800000) |
| #define PXEFILE_ADDR_R __stringify(0x1900000) |
| |
| #define LOAD_ADDRESS_ENV_SETTINGS \ |
| "kernel_addr_r=" KERNEL_ADDR_R "\0" \ |
| "fdt_addr_r=" FDT_ADDR_R "\0" \ |
| "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ |
| "scriptaddr=" SCRIPT_ADDR_R "\0" \ |
| "pxefile_addr_r=" PXEFILE_ADDR_R "\0" |
| |
| #include <config_distro_bootcmd.h> |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| RELOCATION_LIMITS_ENV_SETTINGS \ |
| LOAD_ADDRESS_ENV_SETTINGS \ |
| "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ |
| "console=ttyS0,115200\0" \ |
| BOOTENV |
| |
| #endif /* CONFIG_SPL_BUILD */ |
| |
| #endif /* _CONFIG_TURRIS_OMNIA_H */ |