Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2014 Panasonic Corporation |
Masahiro Yamada | 6462cde | 2015-03-11 15:54:46 +0900 | [diff] [blame] | 3 | * Copyright (C) 2015 Socionext Inc. |
| 4 | * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <linux/types.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <asm/errno.h> |
| 13 | #include <dm/device.h> |
| 14 | #include <dm/root.h> |
| 15 | #include <i2c.h> |
| 16 | #include <fdtdec.h> |
Joe Hershberger | 0eb25b6 | 2015-03-22 17:08:59 -0500 | [diff] [blame] | 17 | #include <mapmem.h> |
Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 18 | |
| 19 | DECLARE_GLOBAL_DATA_PTR; |
| 20 | |
| 21 | struct uniphier_i2c_regs { |
| 22 | u32 dtrm; /* data transmission */ |
| 23 | #define I2C_DTRM_STA (1 << 10) |
| 24 | #define I2C_DTRM_STO (1 << 9) |
| 25 | #define I2C_DTRM_NACK (1 << 8) |
| 26 | #define I2C_DTRM_RD (1 << 0) |
| 27 | u32 drec; /* data reception */ |
| 28 | #define I2C_DREC_STS (1 << 12) |
| 29 | #define I2C_DREC_LRB (1 << 11) |
| 30 | #define I2C_DREC_LAB (1 << 9) |
| 31 | u32 myad; /* slave address */ |
| 32 | u32 clk; /* clock frequency control */ |
| 33 | u32 brst; /* bus reset */ |
| 34 | #define I2C_BRST_FOEN (1 << 1) |
| 35 | #define I2C_BRST_BRST (1 << 0) |
| 36 | u32 hold; /* hold time control */ |
| 37 | u32 bsts; /* bus status monitor */ |
| 38 | u32 noise; /* noise filter control */ |
| 39 | u32 setup; /* setup time control */ |
| 40 | }; |
| 41 | |
| 42 | #define IOBUS_FREQ 100000000 |
| 43 | |
| 44 | struct uniphier_i2c_dev { |
| 45 | struct uniphier_i2c_regs __iomem *regs; /* register base */ |
| 46 | unsigned long input_clk; /* master clock (Hz) */ |
| 47 | unsigned long wait_us; /* wait for every byte transfer (us) */ |
| 48 | }; |
| 49 | |
| 50 | static int uniphier_i2c_probe(struct udevice *dev) |
| 51 | { |
| 52 | fdt_addr_t addr; |
| 53 | fdt_size_t size; |
| 54 | struct uniphier_i2c_dev *priv = dev_get_priv(dev); |
| 55 | |
| 56 | addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size); |
| 57 | |
| 58 | priv->regs = map_sysmem(addr, size); |
| 59 | |
| 60 | if (!priv->regs) |
| 61 | return -ENOMEM; |
| 62 | |
| 63 | priv->input_clk = IOBUS_FREQ; |
| 64 | |
| 65 | /* deassert reset */ |
| 66 | writel(0x3, &priv->regs->brst); |
| 67 | |
| 68 | return 0; |
| 69 | } |
| 70 | |
| 71 | static int uniphier_i2c_remove(struct udevice *dev) |
| 72 | { |
| 73 | struct uniphier_i2c_dev *priv = dev_get_priv(dev); |
| 74 | |
| 75 | unmap_sysmem(priv->regs); |
| 76 | |
| 77 | return 0; |
| 78 | } |
| 79 | |
Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 80 | static int send_and_recv_byte(struct uniphier_i2c_dev *dev, u32 dtrm) |
| 81 | { |
| 82 | writel(dtrm, &dev->regs->dtrm); |
| 83 | |
| 84 | /* |
| 85 | * This controller only provides interruption to inform the completion |
| 86 | * of each byte transfer. (No status register to poll it.) |
| 87 | * Unfortunately, U-Boot does not have a good support of interrupt. |
| 88 | * Wait for a while. |
| 89 | */ |
| 90 | udelay(dev->wait_us); |
| 91 | |
| 92 | return readl(&dev->regs->drec); |
| 93 | } |
| 94 | |
| 95 | static int send_byte(struct uniphier_i2c_dev *dev, u32 dtrm, bool *stop) |
| 96 | { |
| 97 | int ret = 0; |
| 98 | u32 drec; |
| 99 | |
| 100 | drec = send_and_recv_byte(dev, dtrm); |
| 101 | |
| 102 | if (drec & I2C_DREC_LAB) { |
| 103 | debug("uniphier_i2c: bus arbitration failed\n"); |
| 104 | *stop = false; |
| 105 | ret = -EREMOTEIO; |
| 106 | } |
| 107 | if (drec & I2C_DREC_LRB) { |
| 108 | debug("uniphier_i2c: slave did not return ACK\n"); |
| 109 | ret = -EREMOTEIO; |
| 110 | } |
| 111 | return ret; |
| 112 | } |
| 113 | |
| 114 | static int uniphier_i2c_transmit(struct uniphier_i2c_dev *dev, uint addr, |
| 115 | uint len, const u8 *buf, bool *stop) |
| 116 | { |
| 117 | int ret; |
| 118 | |
| 119 | debug("%s: addr = %x, len = %d\n", __func__, addr, len); |
| 120 | |
| 121 | ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop); |
| 122 | if (ret < 0) |
| 123 | goto fail; |
| 124 | |
| 125 | while (len--) { |
| 126 | ret = send_byte(dev, I2C_DTRM_NACK | *buf++, stop); |
| 127 | if (ret < 0) |
| 128 | goto fail; |
| 129 | } |
| 130 | |
| 131 | fail: |
| 132 | if (*stop) |
| 133 | writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm); |
| 134 | |
| 135 | return ret; |
| 136 | } |
| 137 | |
| 138 | static int uniphier_i2c_receive(struct uniphier_i2c_dev *dev, uint addr, |
| 139 | uint len, u8 *buf, bool *stop) |
| 140 | { |
| 141 | int ret; |
| 142 | |
| 143 | debug("%s: addr = %x, len = %d\n", __func__, addr, len); |
| 144 | |
| 145 | ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK | |
| 146 | I2C_DTRM_RD | addr << 1, stop); |
| 147 | if (ret < 0) |
| 148 | goto fail; |
| 149 | |
| 150 | while (len--) |
| 151 | *buf++ = send_and_recv_byte(dev, len ? 0 : I2C_DTRM_NACK); |
| 152 | |
| 153 | fail: |
| 154 | if (*stop) |
| 155 | writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm); |
| 156 | |
| 157 | return ret; |
| 158 | } |
| 159 | |
| 160 | static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, |
| 161 | int nmsgs) |
| 162 | { |
| 163 | int ret = 0; |
| 164 | struct uniphier_i2c_dev *dev = dev_get_priv(bus); |
| 165 | bool stop; |
| 166 | |
| 167 | for (; nmsgs > 0; nmsgs--, msg++) { |
| 168 | /* If next message is read, skip the stop condition */ |
| 169 | stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true; |
| 170 | |
| 171 | if (msg->flags & I2C_M_RD) |
| 172 | ret = uniphier_i2c_receive(dev, msg->addr, msg->len, |
| 173 | msg->buf, &stop); |
| 174 | else |
| 175 | ret = uniphier_i2c_transmit(dev, msg->addr, msg->len, |
| 176 | msg->buf, &stop); |
| 177 | |
| 178 | if (ret < 0) |
| 179 | break; |
| 180 | } |
| 181 | |
| 182 | return ret; |
| 183 | } |
| 184 | |
| 185 | static int uniphier_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| 186 | { |
| 187 | struct uniphier_i2c_dev *priv = dev_get_priv(bus); |
| 188 | |
| 189 | /* max supported frequency is 400 kHz */ |
| 190 | if (speed > 400000) |
| 191 | return -EINVAL; |
| 192 | |
| 193 | /* bus reset: make sure the bus is idle when change the frequency */ |
| 194 | writel(0x1, &priv->regs->brst); |
| 195 | |
| 196 | writel((priv->input_clk / speed / 2 << 16) | (priv->input_clk / speed), |
| 197 | &priv->regs->clk); |
| 198 | |
| 199 | writel(0x3, &priv->regs->brst); |
| 200 | |
| 201 | /* |
| 202 | * Theoretically, each byte can be transferred in |
| 203 | * 1000000 * 9 / speed usec. For safety, wait more than double. |
| 204 | */ |
| 205 | priv->wait_us = 20000000 / speed; |
| 206 | |
| 207 | return 0; |
| 208 | } |
| 209 | |
| 210 | |
| 211 | static const struct dm_i2c_ops uniphier_i2c_ops = { |
| 212 | .xfer = uniphier_i2c_xfer, |
| 213 | .set_bus_speed = uniphier_i2c_set_bus_speed, |
| 214 | }; |
| 215 | |
| 216 | static const struct udevice_id uniphier_i2c_of_match[] = { |
Masahiro Yamada | 6462cde | 2015-03-11 15:54:46 +0900 | [diff] [blame] | 217 | { .compatible = "socionext,uniphier-i2c" }, |
| 218 | { /* sentinel */ } |
Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 219 | }; |
| 220 | |
| 221 | U_BOOT_DRIVER(uniphier_i2c) = { |
| 222 | .name = "uniphier-i2c", |
| 223 | .id = UCLASS_I2C, |
| 224 | .of_match = uniphier_i2c_of_match, |
| 225 | .probe = uniphier_i2c_probe, |
| 226 | .remove = uniphier_i2c_remove, |
Masahiro Yamada | 26f820f | 2015-01-13 12:44:36 +0900 | [diff] [blame] | 227 | .priv_auto_alloc_size = sizeof(struct uniphier_i2c_dev), |
| 228 | .ops = &uniphier_i2c_ops, |
| 229 | }; |