blob: 7d5c0a2c9ccb85c8fc43234dee8704b32ca1dbf4 [file] [log] [blame]
wdenkf5300ab2003-09-12 15:35:15 +00001/*
2 * (C) Copyright 2003
3 * Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
4 *
5 * Based on cpu/arm920t/serial.c, by Gary Jennejohn
Detlev Zundel792a09e2009-05-13 10:54:10 +02006 * (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
wdenkf5300ab2003-09-12 15:35:15 +00007 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 *
22 */
23
24#include <common.h>
25#include <s3c2400.h>
26#include "rs485.h"
27
28static void rs485_setbrg (void);
29static void rs485_cfgio (void);
30static void set_rs485re(unsigned char rs485re_state);
31static void set_rs485de(unsigned char rs485de_state);
32static void rs485_setbrg (void);
33#ifdef NOT_USED
34static void trab_rs485_disable_tx(void);
35static void trab_rs485_disable_rx(void);
36#endif
37
38#define UART_NR S3C24X0_UART1
39
40/* CPLD-Register for controlling TRAB hardware functions */
41#define CPLD_RS485_RE ((volatile unsigned long *)0x04028000)
42
43static void rs485_setbrg (void)
44{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +090045 struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
wdenkf5300ab2003-09-12 15:35:15 +000046 int i;
47 unsigned int reg = 0;
48
49 /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
wdenka0ff7f22003-10-09 13:16:55 +000050 /* reg = (33000000 / (16 * gd->baudrate)) - 1; */
51 reg = (33000000 / (16 * 38400)) - 1;
wdenkf5300ab2003-09-12 15:35:15 +000052
53 /* FIFO enable, Tx/Rx FIFO clear */
54 uart->UFCON = 0x07;
55 uart->UMCON = 0x0;
56 /* Normal,No parity,1 stop,8 bit */
57 uart->ULCON = 0x3;
58 /*
59 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
60 * normal,interrupt or polling
61 */
62 uart->UCON = 0x245;
63 uart->UBRDIV = reg;
64
65 for (i = 0; i < 100; i++);
66}
67
68static void rs485_cfgio (void)
69{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +090070 struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
wdenkf5300ab2003-09-12 15:35:15 +000071
wdenka0ff7f22003-10-09 13:16:55 +000072 gpio->PFCON &= ~(0x3 << 2);
73 gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */
wdenkf5300ab2003-09-12 15:35:15 +000074
wdenka0ff7f22003-10-09 13:16:55 +000075 gpio->PFCON &= ~(0x3 << 6);
76 gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */
wdenkf5300ab2003-09-12 15:35:15 +000077
wdenka0ff7f22003-10-09 13:16:55 +000078 gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */
79 gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */
wdenkf5300ab2003-09-12 15:35:15 +000080
wdenka0ff7f22003-10-09 13:16:55 +000081 gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */
wdenkf5300ab2003-09-12 15:35:15 +000082}
83
84/*
85 * Initialise the rs485 port with the given baudrate. The settings
86 * are always 8 data bits, no parity, 1 stop bit, no start bits.
87 *
88 */
89int rs485_init (void)
90{
wdenka0ff7f22003-10-09 13:16:55 +000091 rs485_cfgio ();
92 rs485_setbrg ();
wdenkf5300ab2003-09-12 15:35:15 +000093
94 return (0);
95}
96
97/*
98 * Read a single byte from the rs485 port. Returns 1 on success, 0
99 * otherwise. When the function is succesfull, the character read is
100 * written into its argument c.
101 */
102int rs485_getc (void)
103{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +0900104 struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
wdenkf5300ab2003-09-12 15:35:15 +0000105
106 /* wait for character to arrive */
107 while (!(uart->UTRSTAT & 0x1));
108
109 return uart->URXH & 0xff;
110}
111
112/*
113 * Output a single byte to the rs485 port.
114 */
115void rs485_putc (const char c)
116{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +0900117 struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
wdenkf5300ab2003-09-12 15:35:15 +0000118
119 /* wait for room in the tx FIFO */
120 while (!(uart->UTRSTAT & 0x2));
121
122 uart->UTXH = c;
123
124 /* If \n, also do \r */
125 if (c == '\n')
126 rs485_putc ('\r');
127}
128
129/*
130 * Test whether a character is in the RX buffer
131 */
132int rs485_tstc (void)
133{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +0900134 struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
wdenkf5300ab2003-09-12 15:35:15 +0000135
136 return uart->UTRSTAT & 0x1;
137}
138
139void rs485_puts (const char *s)
140{
141 while (*s) {
142 rs485_putc (*s++);
143 }
144}
145
146
147/*
148 * State table:
149 * RE DE Result
150 * 1 1 XMIT
151 * 0 0 RCV
152 * 1 0 Shutdown
153 */
154
155/* function that controls the receiver enable for the rs485 */
156/* rs485re_state reflects the level (0/1) of the RE pin */
157
158static void set_rs485re(unsigned char rs485re_state)
159{
160 if(rs485re_state)
161 *CPLD_RS485_RE = 0x010000;
162 else
163 *CPLD_RS485_RE = 0x0;
164}
165
166/* function that controls the sender enable for the rs485 */
167/* rs485de_state reflects the level (0/1) of the DE pin */
168
169static void set_rs485de(unsigned char rs485de_state)
170{
kevin.morfitt@fearnside-systems.co.ukeb0ae7f2009-10-10 13:33:11 +0900171 struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
wdenkf5300ab2003-09-12 15:35:15 +0000172
wdenka0ff7f22003-10-09 13:16:55 +0000173 /* This is on PORT A bit 11 */
174 if(rs485de_state)
175 gpio->PADAT |= (1 << 11);
176 else
177 gpio->PADAT &= ~(1 << 11);
wdenkf5300ab2003-09-12 15:35:15 +0000178}
179
180
181void trab_rs485_enable_tx(void)
182{
183 set_rs485de(1);
184 set_rs485re(1);
185}
186
187void trab_rs485_enable_rx(void)
188{
189 set_rs485re(0);
190 set_rs485de(0);
191}
192
193#ifdef NOT_USED
194static void trab_rs485_disable_tx(void)
195{
196 set_rs485de(0);
197}
198
199static void trab_rs485_disable_rx(void)
200{
201 set_rs485re(1);
202}
203#endif