Move TRAB burn-in tests to TRAB board directory
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
new file mode 100644
index 0000000..774fd59
--- /dev/null
+++ b/board/trab/rs485.c
@@ -0,0 +1,203 @@
+/*
+ * (C) Copyright 2003
+ * Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
+ *
+ * Based on cpu/arm920t/serial.c, by Gary Jennejohn
+ * (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <s3c2400.h>
+#include "rs485.h"
+
+static void rs485_setbrg (void);
+static void rs485_cfgio (void);
+static void set_rs485re(unsigned char rs485re_state);
+static void set_rs485de(unsigned char rs485de_state);
+static void rs485_setbrg (void);
+#ifdef NOT_USED
+static void trab_rs485_disable_tx(void);
+static void trab_rs485_disable_rx(void);
+#endif
+
+#define UART_NR S3C24X0_UART1
+
+/* CPLD-Register for controlling TRAB hardware functions */
+#define CPLD_RS485_RE ((volatile unsigned long *)0x04028000)
+
+static void rs485_setbrg (void)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ int i;
+ unsigned int reg = 0;
+
+ /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
+ /* reg = (33000000 / (16 * gd->baudrate)) - 1; */
+ reg = (33000000 / (16 * 38.400)) - 1;
+
+ /* FIFO enable, Tx/Rx FIFO clear */
+ uart->UFCON = 0x07;
+ uart->UMCON = 0x0;
+ /* Normal,No parity,1 stop,8 bit */
+ uart->ULCON = 0x3;
+ /*
+ * tx=level,rx=edge,disable timeout int.,enable rx error int.,
+ * normal,interrupt or polling
+ */
+ uart->UCON = 0x245;
+ uart->UBRDIV = reg;
+
+ for (i = 0; i < 100; i++);
+}
+
+static void rs485_cfgio (void)
+{
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+ gpio->PFCON &= ~(0x3 << 2);
+ gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */
+
+ gpio->PFCON &= ~(0x3 << 6);
+ gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */
+
+ gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */
+ gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */
+
+ gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */
+}
+
+/*
+ * Initialise the rs485 port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int rs485_init (void)
+{
+ rs485_cfgio ();
+ rs485_setbrg ();
+
+ return (0);
+}
+
+/*
+ * Read a single byte from the rs485 port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int rs485_getc (void)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+
+ /* wait for character to arrive */
+ while (!(uart->UTRSTAT & 0x1));
+
+ return uart->URXH & 0xff;
+}
+
+/*
+ * Output a single byte to the rs485 port.
+ */
+void rs485_putc (const char c)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+
+ /* wait for room in the tx FIFO */
+ while (!(uart->UTRSTAT & 0x2));
+
+ uart->UTXH = c;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ rs485_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int rs485_tstc (void)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+
+ return uart->UTRSTAT & 0x1;
+}
+
+void rs485_puts (const char *s)
+{
+ while (*s) {
+ rs485_putc (*s++);
+ }
+}
+
+
+/*
+ * State table:
+ * RE DE Result
+ * 1 1 XMIT
+ * 0 0 RCV
+ * 1 0 Shutdown
+ */
+
+/* function that controls the receiver enable for the rs485 */
+/* rs485re_state reflects the level (0/1) of the RE pin */
+
+static void set_rs485re(unsigned char rs485re_state)
+{
+ if(rs485re_state)
+ *CPLD_RS485_RE = 0x010000;
+ else
+ *CPLD_RS485_RE = 0x0;
+}
+
+/* function that controls the sender enable for the rs485 */
+/* rs485de_state reflects the level (0/1) of the DE pin */
+
+static void set_rs485de(unsigned char rs485de_state)
+{
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+ /* This is on PORT A bit 11 */
+ if(rs485de_state)
+ gpio->PADAT |= (1 << 11);
+ else
+ gpio->PADAT &= ~(1 << 11);
+}
+
+
+void trab_rs485_enable_tx(void)
+{
+ set_rs485de(1);
+ set_rs485re(1);
+}
+
+void trab_rs485_enable_rx(void)
+{
+ set_rs485re(0);
+ set_rs485de(0);
+}
+
+#ifdef NOT_USED
+static void trab_rs485_disable_tx(void)
+{
+ set_rs485de(0);
+}
+
+static void trab_rs485_disable_rx(void)
+{
+ set_rs485re(1);
+}
+#endif