Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Atmel Corporation |
| 3 | * Wenyou.Yang <wenyou.yang@atmel.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <atmel_hlcdc.h> |
| 10 | #include <lcd.h> |
| 11 | #include <mmc.h> |
| 12 | #include <net.h> |
| 13 | #include <netdev.h> |
| 14 | #include <spi.h> |
| 15 | #include <version.h> |
| 16 | #include <asm/io.h> |
| 17 | #include <asm/arch/at91_common.h> |
Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 18 | #include <asm/arch/atmel_pio4.h> |
Wenyou Yang | 37dadbc | 2016-02-01 18:18:21 +0800 | [diff] [blame] | 19 | #include <asm/arch/atmel_mpddrc.h> |
Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 20 | #include <asm/arch/atmel_usba_udc.h> |
| 21 | #include <asm/arch/atmel_sdhci.h> |
| 22 | #include <asm/arch/clk.h> |
| 23 | #include <asm/arch/gpio.h> |
| 24 | #include <asm/arch/sama5d2.h> |
| 25 | |
| 26 | DECLARE_GLOBAL_DATA_PTR; |
| 27 | |
| 28 | int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| 29 | { |
| 30 | return bus == 0 && cs == 0; |
| 31 | } |
| 32 | |
| 33 | void spi_cs_activate(struct spi_slave *slave) |
| 34 | { |
| 35 | atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0); |
| 36 | } |
| 37 | |
| 38 | void spi_cs_deactivate(struct spi_slave *slave) |
| 39 | { |
| 40 | atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); |
| 41 | } |
| 42 | |
| 43 | static void board_spi0_hw_init(void) |
| 44 | { |
| 45 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0); |
| 46 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0); |
| 47 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0); |
| 48 | |
| 49 | atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); |
| 50 | |
| 51 | at91_periph_clk_enable(ATMEL_ID_SPI0); |
| 52 | } |
| 53 | |
| 54 | static void board_usb_hw_init(void) |
| 55 | { |
| 56 | atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); |
| 57 | } |
| 58 | |
| 59 | #ifdef CONFIG_LCD |
| 60 | vidinfo_t panel_info = { |
| 61 | .vl_col = 480, |
| 62 | .vl_row = 272, |
| 63 | .vl_clk = 9000000, |
| 64 | .vl_bpix = LCD_BPP, |
| 65 | .vl_tft = 1, |
| 66 | .vl_hsync_len = 41, |
| 67 | .vl_left_margin = 2, |
| 68 | .vl_right_margin = 2, |
| 69 | .vl_vsync_len = 11, |
| 70 | .vl_upper_margin = 2, |
| 71 | .vl_lower_margin = 2, |
| 72 | .mmio = ATMEL_BASE_LCDC, |
| 73 | }; |
| 74 | |
| 75 | /* No power up/down pin for the LCD pannel */ |
| 76 | void lcd_enable(void) { /* Empty! */ } |
| 77 | void lcd_disable(void) { /* Empty! */ } |
| 78 | |
| 79 | unsigned int has_lcdc(void) |
| 80 | { |
| 81 | return 1; |
| 82 | } |
| 83 | |
| 84 | static void board_lcd_hw_init(void) |
| 85 | { |
| 86 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */ |
| 87 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */ |
| 88 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */ |
| 89 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */ |
| 90 | atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */ |
| 91 | atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */ |
| 92 | |
| 93 | /* LCDDAT0 */ |
| 94 | /* LCDDAT1 */ |
| 95 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */ |
| 96 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */ |
| 97 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */ |
| 98 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */ |
| 99 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */ |
| 100 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */ |
| 101 | |
| 102 | /* LCDDAT8 */ |
| 103 | /* LCDDAT9 */ |
| 104 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */ |
| 105 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */ |
| 106 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */ |
| 107 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */ |
| 108 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */ |
| 109 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */ |
| 110 | |
| 111 | /* LCDD16 */ |
| 112 | /* LCDD17 */ |
| 113 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */ |
| 114 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */ |
| 115 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */ |
| 116 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */ |
| 117 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */ |
| 118 | atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */ |
| 119 | |
| 120 | at91_periph_clk_enable(ATMEL_ID_LCDC); |
| 121 | } |
| 122 | |
| 123 | #ifdef CONFIG_LCD_INFO |
| 124 | void lcd_show_board_info(void) |
| 125 | { |
| 126 | ulong dram_size; |
| 127 | int i; |
| 128 | char temp[32]; |
| 129 | |
| 130 | lcd_printf("%s\n", U_BOOT_VERSION); |
| 131 | lcd_printf("2015 ATMEL Corp\n"); |
| 132 | lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), |
| 133 | strmhz(temp, get_cpu_clk_rate())); |
| 134 | |
| 135 | dram_size = 0; |
| 136 | for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) |
| 137 | dram_size += gd->bd->bi_dram[i].size; |
| 138 | |
| 139 | lcd_printf("%ld MB SDRAM\n", dram_size >> 20); |
| 140 | } |
| 141 | #endif /* CONFIG_LCD_INFO */ |
| 142 | #endif /* CONFIG_LCD */ |
| 143 | |
| 144 | static void board_gmac_hw_init(void) |
| 145 | { |
| 146 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */ |
| 147 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */ |
| 148 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */ |
| 149 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */ |
| 150 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */ |
| 151 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */ |
| 152 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */ |
| 153 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */ |
| 154 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */ |
| 155 | atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */ |
| 156 | |
| 157 | at91_periph_clk_enable(ATMEL_ID_GMAC); |
| 158 | } |
| 159 | |
| 160 | static void board_sdhci0_hw_init(void) |
| 161 | { |
| 162 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SDMMC0_CK */ |
| 163 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SDMMC0_CMD */ |
| 164 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SDMMC0_DAT0 */ |
| 165 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* SDMMC0_DAT1 */ |
| 166 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* SDMMC0_DAT2 */ |
| 167 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* SDMMC0_DAT3 */ |
| 168 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0); /* SDMMC0_DAT4 */ |
| 169 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0); /* SDMMC0_DAT5 */ |
| 170 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0); /* SDMMC0_DAT6 */ |
| 171 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0); /* SDMMC0_DAT7 */ |
| 172 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0); /* SDMMC0_RSTN */ |
| 173 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SDMMC0_VDDSEL */ |
Wenyou Yang | a9c89bf | 2016-04-11 14:07:17 +0800 | [diff] [blame] | 174 | atmel_pio4_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SDMMC0_CD */ |
Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 175 | |
| 176 | at91_periph_clk_enable(ATMEL_ID_SDMMC0); |
| 177 | at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0, |
Wenyou Yang | c043d8d | 2016-04-11 16:41:33 +0800 | [diff] [blame] | 178 | GCK_CSS_UPLL_CLK, 1); |
Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 179 | } |
| 180 | |
| 181 | static void board_sdhci1_hw_init(void) |
| 182 | { |
| 183 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0); /* SDMMC1_DAT0 */ |
| 184 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0); /* SDMMC1_DAT1 */ |
| 185 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0); /* SDMMC1_DAT2 */ |
| 186 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0); /* SDMMC1_DAT3 */ |
| 187 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0); /* SDMMC1_CK */ |
| 188 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0); /* SDMMC1_RSTN */ |
| 189 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0); /* SDMMC1_CMD */ |
| 190 | atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0); /* SDMMC1_CD */ |
| 191 | |
| 192 | at91_periph_clk_enable(ATMEL_ID_SDMMC1); |
| 193 | at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1, |
Wenyou Yang | c043d8d | 2016-04-11 16:41:33 +0800 | [diff] [blame] | 194 | GCK_CSS_UPLL_CLK, 1); |
Wenyou Yang | 75238f2 | 2015-10-30 09:55:52 +0800 | [diff] [blame] | 195 | } |
| 196 | |
| 197 | int board_mmc_init(bd_t *bis) |
| 198 | { |
| 199 | #ifdef CONFIG_ATMEL_SDHCI0 |
| 200 | atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0); |
| 201 | #endif |
| 202 | #ifdef CONFIG_ATMEL_SDHCI1 |
| 203 | atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1); |
| 204 | #endif |
| 205 | |
| 206 | return 0; |
| 207 | } |
| 208 | |
| 209 | static void board_uart1_hw_init(void) |
| 210 | { |
| 211 | atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1); /* URXD1 */ |
| 212 | atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */ |
| 213 | |
| 214 | at91_periph_clk_enable(ATMEL_ID_UART1); |
| 215 | } |
| 216 | |
| 217 | int board_early_init_f(void) |
| 218 | { |
| 219 | at91_periph_clk_enable(ATMEL_ID_PIOA); |
| 220 | at91_periph_clk_enable(ATMEL_ID_PIOB); |
| 221 | at91_periph_clk_enable(ATMEL_ID_PIOC); |
| 222 | at91_periph_clk_enable(ATMEL_ID_PIOD); |
| 223 | |
| 224 | board_uart1_hw_init(); |
| 225 | |
| 226 | return 0; |
| 227 | } |
| 228 | |
| 229 | int board_init(void) |
| 230 | { |
| 231 | /* address of boot parameters */ |
| 232 | gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; |
| 233 | |
| 234 | #ifdef CONFIG_ATMEL_SPI |
| 235 | board_spi0_hw_init(); |
| 236 | #endif |
| 237 | #ifdef CONFIG_ATMEL_SDHCI |
| 238 | #ifdef CONFIG_ATMEL_SDHCI0 |
| 239 | board_sdhci0_hw_init(); |
| 240 | #endif |
| 241 | #ifdef CONFIG_ATMEL_SDHCI1 |
| 242 | board_sdhci1_hw_init(); |
| 243 | #endif |
| 244 | #endif |
| 245 | #ifdef CONFIG_MACB |
| 246 | board_gmac_hw_init(); |
| 247 | #endif |
| 248 | #ifdef CONFIG_LCD |
| 249 | board_lcd_hw_init(); |
| 250 | #endif |
| 251 | #ifdef CONFIG_CMD_USB |
| 252 | board_usb_hw_init(); |
| 253 | #endif |
| 254 | #ifdef CONFIG_USB_GADGET_ATMEL_USBA |
| 255 | at91_udp_hw_init(); |
| 256 | #endif |
| 257 | |
| 258 | return 0; |
| 259 | } |
| 260 | |
| 261 | int dram_init(void) |
| 262 | { |
| 263 | gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| 264 | CONFIG_SYS_SDRAM_SIZE); |
| 265 | return 0; |
| 266 | } |
| 267 | |
| 268 | int board_eth_init(bd_t *bis) |
| 269 | { |
| 270 | int rc = 0; |
| 271 | |
| 272 | #ifdef CONFIG_MACB |
| 273 | rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); |
| 274 | #endif |
| 275 | |
| 276 | #ifdef CONFIG_USB_GADGET_ATMEL_USBA |
| 277 | usba_udc_probe(&pdata); |
| 278 | #ifdef CONFIG_USB_ETH_RNDIS |
| 279 | usb_eth_initialize(bis); |
| 280 | #endif |
| 281 | #endif |
| 282 | |
| 283 | return rc; |
| 284 | } |
Wenyou Yang | 37dadbc | 2016-02-01 18:18:21 +0800 | [diff] [blame] | 285 | |
| 286 | /* SPL */ |
| 287 | #ifdef CONFIG_SPL_BUILD |
| 288 | void spl_board_init(void) |
| 289 | { |
| 290 | #ifdef CONFIG_SYS_USE_SERIALFLASH |
| 291 | board_spi0_hw_init(); |
| 292 | #endif |
| 293 | #ifdef CONFIG_ATMEL_SDHCI |
| 294 | #ifdef CONFIG_ATMEL_SDHCI0 |
| 295 | board_sdhci0_hw_init(); |
| 296 | #endif |
| 297 | #ifdef CONFIG_ATMEL_SDHCI1 |
| 298 | board_sdhci1_hw_init(); |
| 299 | #endif |
| 300 | #endif |
| 301 | } |
| 302 | |
| 303 | static void ddrc_conf(struct atmel_mpddrc_config *ddrc) |
| 304 | { |
| 305 | ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM); |
| 306 | |
| 307 | ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | |
| 308 | ATMEL_MPDDRC_CR_NR_ROW_14 | |
| 309 | ATMEL_MPDDRC_CR_CAS_DDR_CAS5 | |
| 310 | ATMEL_MPDDRC_CR_DIC_DS | |
| 311 | ATMEL_MPDDRC_CR_DIS_DLL | |
| 312 | ATMEL_MPDDRC_CR_NB_8BANKS | |
| 313 | ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | |
| 314 | ATMEL_MPDDRC_CR_UNAL_SUPPORTED); |
| 315 | |
| 316 | ddrc->rtr = 0x511; |
| 317 | |
| 318 | ddrc->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | |
| 319 | 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | |
| 320 | 4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | |
| 321 | 9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | |
| 322 | 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | |
| 323 | 4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | |
| 324 | 4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | |
| 325 | 4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); |
| 326 | |
| 327 | ddrc->tpr1 = (27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET | |
| 328 | 29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | |
| 329 | 0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | |
| 330 | 3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET); |
| 331 | |
| 332 | ddrc->tpr2 = (0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET | |
| 333 | 0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | |
| 334 | 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | |
| 335 | 4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | |
| 336 | 7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET); |
| 337 | } |
| 338 | |
| 339 | void mem_init(void) |
| 340 | { |
| 341 | struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; |
| 342 | struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; |
| 343 | struct atmel_mpddrc_config ddrc_config; |
| 344 | u32 reg; |
| 345 | |
| 346 | ddrc_conf(&ddrc_config); |
| 347 | |
| 348 | at91_periph_clk_enable(ATMEL_ID_MPDDRC); |
| 349 | writel(AT91_PMC_DDR, &pmc->scer); |
| 350 | |
| 351 | reg = readl(&mpddrc->io_calibr); |
| 352 | reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV; |
| 353 | reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55; |
| 354 | reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO; |
| 355 | reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100); |
| 356 | writel(reg, &mpddrc->io_calibr); |
| 357 | |
| 358 | writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE, |
| 359 | &mpddrc->rd_data_path); |
| 360 | |
| 361 | ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config); |
| 362 | |
| 363 | writel(0x3, &mpddrc->cal_mr4); |
| 364 | writel(64, &mpddrc->tim_cal); |
| 365 | } |
| 366 | |
| 367 | void at91_pmc_init(void) |
| 368 | { |
| 369 | struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; |
| 370 | u32 tmp; |
| 371 | |
| 372 | tmp = AT91_PMC_PLLAR_29 | |
| 373 | AT91_PMC_PLLXR_PLLCOUNT(0x3f) | |
| 374 | AT91_PMC_PLLXR_MUL(82) | |
| 375 | AT91_PMC_PLLXR_DIV(1); |
| 376 | at91_plla_init(tmp); |
| 377 | |
| 378 | writel(0x0 << 8, &pmc->pllicpr); |
| 379 | |
| 380 | tmp = AT91_PMC_MCKR_H32MXDIV | |
| 381 | AT91_PMC_MCKR_PLLADIV_2 | |
| 382 | AT91_PMC_MCKR_MDIV_3 | |
| 383 | AT91_PMC_MCKR_CSS_PLLA; |
| 384 | at91_mck_init(tmp); |
| 385 | } |
| 386 | #endif |