blob: 04422ce9be2640216a8c1dc25fc9b6c2a98a0b41 [file] [log] [blame]
Wenyou Yang75238f22015-10-30 09:55:52 +08001/*
2 * Copyright (C) 2015 Atmel Corporation
3 * Wenyou.Yang <wenyou.yang@atmel.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#include <common.h>
9#include <atmel_hlcdc.h>
10#include <lcd.h>
11#include <mmc.h>
12#include <net.h>
13#include <netdev.h>
14#include <spi.h>
15#include <version.h>
16#include <asm/io.h>
17#include <asm/arch/at91_common.h>
Wenyou Yang75238f22015-10-30 09:55:52 +080018#include <asm/arch/atmel_pio4.h>
Wenyou Yang37dadbc2016-02-01 18:18:21 +080019#include <asm/arch/atmel_mpddrc.h>
Wenyou Yang75238f22015-10-30 09:55:52 +080020#include <asm/arch/atmel_usba_udc.h>
21#include <asm/arch/atmel_sdhci.h>
22#include <asm/arch/clk.h>
23#include <asm/arch/gpio.h>
24#include <asm/arch/sama5d2.h>
25
26DECLARE_GLOBAL_DATA_PTR;
27
28int spi_cs_is_valid(unsigned int bus, unsigned int cs)
29{
30 return bus == 0 && cs == 0;
31}
32
33void spi_cs_activate(struct spi_slave *slave)
34{
35 atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0);
36}
37
38void spi_cs_deactivate(struct spi_slave *slave)
39{
40 atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
41}
42
43static void board_spi0_hw_init(void)
44{
45 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0);
46 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0);
47 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0);
48
49 atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
50
51 at91_periph_clk_enable(ATMEL_ID_SPI0);
52}
53
54static void board_usb_hw_init(void)
55{
56 atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
57}
58
59#ifdef CONFIG_LCD
60vidinfo_t panel_info = {
61 .vl_col = 480,
62 .vl_row = 272,
63 .vl_clk = 9000000,
64 .vl_bpix = LCD_BPP,
65 .vl_tft = 1,
66 .vl_hsync_len = 41,
67 .vl_left_margin = 2,
68 .vl_right_margin = 2,
69 .vl_vsync_len = 11,
70 .vl_upper_margin = 2,
71 .vl_lower_margin = 2,
72 .mmio = ATMEL_BASE_LCDC,
73};
74
75/* No power up/down pin for the LCD pannel */
76void lcd_enable(void) { /* Empty! */ }
77void lcd_disable(void) { /* Empty! */ }
78
79unsigned int has_lcdc(void)
80{
81 return 1;
82}
83
84static void board_lcd_hw_init(void)
85{
86 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */
87 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */
88 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */
89 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */
90 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */
91 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */
92
93 /* LCDDAT0 */
94 /* LCDDAT1 */
95 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */
96 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */
97 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */
98 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */
99 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */
100 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */
101
102 /* LCDDAT8 */
103 /* LCDDAT9 */
104 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */
105 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */
106 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */
107 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */
108 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */
109 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */
110
111 /* LCDD16 */
112 /* LCDD17 */
113 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */
114 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */
115 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */
116 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */
117 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */
118 atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */
119
120 at91_periph_clk_enable(ATMEL_ID_LCDC);
121}
122
123#ifdef CONFIG_LCD_INFO
124void lcd_show_board_info(void)
125{
126 ulong dram_size;
127 int i;
128 char temp[32];
129
130 lcd_printf("%s\n", U_BOOT_VERSION);
131 lcd_printf("2015 ATMEL Corp\n");
132 lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
133 strmhz(temp, get_cpu_clk_rate()));
134
135 dram_size = 0;
136 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
137 dram_size += gd->bd->bi_dram[i].size;
138
139 lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
140}
141#endif /* CONFIG_LCD_INFO */
142#endif /* CONFIG_LCD */
143
144static void board_gmac_hw_init(void)
145{
146 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */
147 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */
148 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */
149 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */
150 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */
151 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */
152 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */
153 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */
154 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */
155 atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */
156
157 at91_periph_clk_enable(ATMEL_ID_GMAC);
158}
159
160static void board_sdhci0_hw_init(void)
161{
162 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SDMMC0_CK */
163 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SDMMC0_CMD */
164 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SDMMC0_DAT0 */
165 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* SDMMC0_DAT1 */
166 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* SDMMC0_DAT2 */
167 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* SDMMC0_DAT3 */
168 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0); /* SDMMC0_DAT4 */
169 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0); /* SDMMC0_DAT5 */
170 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0); /* SDMMC0_DAT6 */
171 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0); /* SDMMC0_DAT7 */
172 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0); /* SDMMC0_RSTN */
173 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SDMMC0_VDDSEL */
Wenyou Yanga9c89bf2016-04-11 14:07:17 +0800174 atmel_pio4_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SDMMC0_CD */
Wenyou Yang75238f22015-10-30 09:55:52 +0800175
176 at91_periph_clk_enable(ATMEL_ID_SDMMC0);
177 at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0,
178 GCK_CSS_PLLA_CLK, 1);
179}
180
181static void board_sdhci1_hw_init(void)
182{
183 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0); /* SDMMC1_DAT0 */
184 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0); /* SDMMC1_DAT1 */
185 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0); /* SDMMC1_DAT2 */
186 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0); /* SDMMC1_DAT3 */
187 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0); /* SDMMC1_CK */
188 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0); /* SDMMC1_RSTN */
189 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0); /* SDMMC1_CMD */
190 atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0); /* SDMMC1_CD */
191
192 at91_periph_clk_enable(ATMEL_ID_SDMMC1);
193 at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1,
194 GCK_CSS_PLLA_CLK, 1);
195}
196
197int board_mmc_init(bd_t *bis)
198{
199#ifdef CONFIG_ATMEL_SDHCI0
200 atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0);
201#endif
202#ifdef CONFIG_ATMEL_SDHCI1
203 atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1);
204#endif
205
206 return 0;
207}
208
209static void board_uart1_hw_init(void)
210{
211 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1); /* URXD1 */
212 atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */
213
214 at91_periph_clk_enable(ATMEL_ID_UART1);
215}
216
217int board_early_init_f(void)
218{
219 at91_periph_clk_enable(ATMEL_ID_PIOA);
220 at91_periph_clk_enable(ATMEL_ID_PIOB);
221 at91_periph_clk_enable(ATMEL_ID_PIOC);
222 at91_periph_clk_enable(ATMEL_ID_PIOD);
223
224 board_uart1_hw_init();
225
226 return 0;
227}
228
229int board_init(void)
230{
231 /* address of boot parameters */
232 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
233
234#ifdef CONFIG_ATMEL_SPI
235 board_spi0_hw_init();
236#endif
237#ifdef CONFIG_ATMEL_SDHCI
238#ifdef CONFIG_ATMEL_SDHCI0
239 board_sdhci0_hw_init();
240#endif
241#ifdef CONFIG_ATMEL_SDHCI1
242 board_sdhci1_hw_init();
243#endif
244#endif
245#ifdef CONFIG_MACB
246 board_gmac_hw_init();
247#endif
248#ifdef CONFIG_LCD
249 board_lcd_hw_init();
250#endif
251#ifdef CONFIG_CMD_USB
252 board_usb_hw_init();
253#endif
254#ifdef CONFIG_USB_GADGET_ATMEL_USBA
255 at91_udp_hw_init();
256#endif
257
258 return 0;
259}
260
261int dram_init(void)
262{
263 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
264 CONFIG_SYS_SDRAM_SIZE);
265 return 0;
266}
267
268int board_eth_init(bd_t *bis)
269{
270 int rc = 0;
271
272#ifdef CONFIG_MACB
273 rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
274#endif
275
276#ifdef CONFIG_USB_GADGET_ATMEL_USBA
277 usba_udc_probe(&pdata);
278#ifdef CONFIG_USB_ETH_RNDIS
279 usb_eth_initialize(bis);
280#endif
281#endif
282
283 return rc;
284}
Wenyou Yang37dadbc2016-02-01 18:18:21 +0800285
286/* SPL */
287#ifdef CONFIG_SPL_BUILD
288void spl_board_init(void)
289{
290#ifdef CONFIG_SYS_USE_SERIALFLASH
291 board_spi0_hw_init();
292#endif
293#ifdef CONFIG_ATMEL_SDHCI
294#ifdef CONFIG_ATMEL_SDHCI0
295 board_sdhci0_hw_init();
296#endif
297#ifdef CONFIG_ATMEL_SDHCI1
298 board_sdhci1_hw_init();
299#endif
300#endif
301}
302
303static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
304{
305 ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM);
306
307 ddrc->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
308 ATMEL_MPDDRC_CR_NR_ROW_14 |
309 ATMEL_MPDDRC_CR_CAS_DDR_CAS5 |
310 ATMEL_MPDDRC_CR_DIC_DS |
311 ATMEL_MPDDRC_CR_DIS_DLL |
312 ATMEL_MPDDRC_CR_NB_8BANKS |
313 ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
314 ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
315
316 ddrc->rtr = 0x511;
317
318 ddrc->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
319 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
320 4 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
321 9 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
322 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
323 4 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
324 4 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
325 4 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
326
327 ddrc->tpr1 = (27 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET |
328 29 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
329 0 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
330 3 << ATMEL_MPDDRC_TPR1_TXP_OFFSET);
331
332 ddrc->tpr2 = (0 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET |
333 0 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
334 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
335 4 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
336 7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET);
337}
338
339void mem_init(void)
340{
341 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
342 struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
343 struct atmel_mpddrc_config ddrc_config;
344 u32 reg;
345
346 ddrc_conf(&ddrc_config);
347
348 at91_periph_clk_enable(ATMEL_ID_MPDDRC);
349 writel(AT91_PMC_DDR, &pmc->scer);
350
351 reg = readl(&mpddrc->io_calibr);
352 reg &= ~ATMEL_MPDDRC_IO_CALIBR_RDIV;
353 reg |= ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55;
354 reg &= ~ATMEL_MPDDRC_IO_CALIBR_TZQIO;
355 reg |= ATMEL_MPDDRC_IO_CALIBR_TZQIO_(100);
356 writel(reg, &mpddrc->io_calibr);
357
358 writel(ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE,
359 &mpddrc->rd_data_path);
360
361 ddr3_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddrc_config);
362
363 writel(0x3, &mpddrc->cal_mr4);
364 writel(64, &mpddrc->tim_cal);
365}
366
367void at91_pmc_init(void)
368{
369 struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
370 u32 tmp;
371
372 tmp = AT91_PMC_PLLAR_29 |
373 AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
374 AT91_PMC_PLLXR_MUL(82) |
375 AT91_PMC_PLLXR_DIV(1);
376 at91_plla_init(tmp);
377
378 writel(0x0 << 8, &pmc->pllicpr);
379
380 tmp = AT91_PMC_MCKR_H32MXDIV |
381 AT91_PMC_MCKR_PLLADIV_2 |
382 AT91_PMC_MCKR_MDIV_3 |
383 AT91_PMC_MCKR_CSS_PLLA;
384 at91_mck_init(tmp);
385}
386#endif