blob: 3ed3801dfe7d9d045d19110c70d4000029461002 [file] [log] [blame]
rev13@wp.pleaaa4f72015-03-01 12:44:40 +01001/*
2 * (C) Copyright 2011
3 * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
4 *
5 * (C) Copyright 2015
6 * Kamil Lulko, <rev13@wp.pl>
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#ifndef _MACH_STM32_H_
12#define _MACH_STM32_H_
13
14/*
15 * Peripheral memory map
16 */
Antonio Borneo089fddf2015-07-19 22:19:46 +080017#define STM32_SYSMEM_BASE 0x1FFF0000
rev13@wp.pleaaa4f72015-03-01 12:44:40 +010018#define STM32_PERIPH_BASE 0x40000000
19#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000)
20#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000)
21#define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00020000)
22#define STM32_AHB2PERIPH_BASE (STM32_PERIPH_BASE + 0x10000000)
23
24#define STM32_BUS_MASK 0xFFFF0000
25
26/*
27 * Register maps
28 */
Antonio Borneo089fddf2015-07-19 22:19:46 +080029struct stm32_u_id_regs {
30 u32 u_id_low;
31 u32 u_id_mid;
32 u32 u_id_high;
33};
34
rev13@wp.pleaaa4f72015-03-01 12:44:40 +010035struct stm32_rcc_regs {
36 u32 cr; /* RCC clock control */
37 u32 pllcfgr; /* RCC PLL configuration */
38 u32 cfgr; /* RCC clock configuration */
39 u32 cir; /* RCC clock interrupt */
40 u32 ahb1rstr; /* RCC AHB1 peripheral reset */
41 u32 ahb2rstr; /* RCC AHB2 peripheral reset */
42 u32 ahb3rstr; /* RCC AHB3 peripheral reset */
43 u32 rsv0;
44 u32 apb1rstr; /* RCC APB1 peripheral reset */
45 u32 apb2rstr; /* RCC APB2 peripheral reset */
46 u32 rsv1[2];
47 u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
48 u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
49 u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
50 u32 rsv2;
51 u32 apb1enr; /* RCC APB1 peripheral clock enable */
52 u32 apb2enr; /* RCC APB2 peripheral clock enable */
53 u32 rsv3[2];
54 u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
55 u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
56 u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
57 u32 rsv4;
58 u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
59 u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
60 u32 rsv5[2];
61 u32 bdcr; /* RCC Backup domain control */
62 u32 csr; /* RCC clock control & status */
63 u32 rsv6[2];
64 u32 sscgr; /* RCC spread spectrum clock generation */
65 u32 plli2scfgr; /* RCC PLLI2S configuration */
66 u32 pllsaicfgr;
67 u32 dckcfgr;
68};
69
70struct stm32_pwr_regs {
71 u32 cr;
72 u32 csr;
73};
74
75struct stm32_flash_regs {
76 u32 acr;
77 u32 key;
78 u32 optkeyr;
79 u32 sr;
80 u32 cr;
81 u32 optcr;
82 u32 optcr1;
83};
84
85/*
86 * Registers access macros
87 */
Antonio Borneo089fddf2015-07-19 22:19:46 +080088#define STM32_U_ID_BASE (STM32_SYSMEM_BASE + 0x7A10)
89#define STM32_U_ID ((struct stm32_u_id_regs *)STM32_U_ID_BASE)
90
rev13@wp.pleaaa4f72015-03-01 12:44:40 +010091#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800)
92#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE)
93
94#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000)
95#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE)
96
97#define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0x3C00)
98#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE)
99
100#define STM32_FLASH_SR_BSY (1 << 16)
101
102#define STM32_FLASH_CR_PG (1 << 0)
103#define STM32_FLASH_CR_SER (1 << 1)
104#define STM32_FLASH_CR_STRT (1 << 16)
105#define STM32_FLASH_CR_LOCK (1 << 31)
106#define STM32_FLASH_CR_SNB_OFFSET 3
107
108enum clock {
109 CLOCK_CORE,
110 CLOCK_AHB,
111 CLOCK_APB1,
112 CLOCK_APB2
113};
114
115int configure_clocks(void);
116unsigned long clock_get(enum clock clck);
117
118#endif /* _MACH_STM32_H_ */