| /* |
| * (C) Copyright 2011 |
| * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com |
| * |
| * (C) Copyright 2015 |
| * Kamil Lulko, <rev13@wp.pl> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _MACH_STM32_H_ |
| #define _MACH_STM32_H_ |
| |
| /* |
| * Peripheral memory map |
| */ |
| #define STM32_SYSMEM_BASE 0x1FFF0000 |
| #define STM32_PERIPH_BASE 0x40000000 |
| #define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) |
| #define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) |
| #define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00020000) |
| #define STM32_AHB2PERIPH_BASE (STM32_PERIPH_BASE + 0x10000000) |
| |
| #define STM32_BUS_MASK 0xFFFF0000 |
| |
| /* |
| * Register maps |
| */ |
| struct stm32_u_id_regs { |
| u32 u_id_low; |
| u32 u_id_mid; |
| u32 u_id_high; |
| }; |
| |
| struct stm32_rcc_regs { |
| u32 cr; /* RCC clock control */ |
| u32 pllcfgr; /* RCC PLL configuration */ |
| u32 cfgr; /* RCC clock configuration */ |
| u32 cir; /* RCC clock interrupt */ |
| u32 ahb1rstr; /* RCC AHB1 peripheral reset */ |
| u32 ahb2rstr; /* RCC AHB2 peripheral reset */ |
| u32 ahb3rstr; /* RCC AHB3 peripheral reset */ |
| u32 rsv0; |
| u32 apb1rstr; /* RCC APB1 peripheral reset */ |
| u32 apb2rstr; /* RCC APB2 peripheral reset */ |
| u32 rsv1[2]; |
| u32 ahb1enr; /* RCC AHB1 peripheral clock enable */ |
| u32 ahb2enr; /* RCC AHB2 peripheral clock enable */ |
| u32 ahb3enr; /* RCC AHB3 peripheral clock enable */ |
| u32 rsv2; |
| u32 apb1enr; /* RCC APB1 peripheral clock enable */ |
| u32 apb2enr; /* RCC APB2 peripheral clock enable */ |
| u32 rsv3[2]; |
| u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */ |
| u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */ |
| u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */ |
| u32 rsv4; |
| u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */ |
| u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */ |
| u32 rsv5[2]; |
| u32 bdcr; /* RCC Backup domain control */ |
| u32 csr; /* RCC clock control & status */ |
| u32 rsv6[2]; |
| u32 sscgr; /* RCC spread spectrum clock generation */ |
| u32 plli2scfgr; /* RCC PLLI2S configuration */ |
| u32 pllsaicfgr; |
| u32 dckcfgr; |
| }; |
| |
| struct stm32_pwr_regs { |
| u32 cr; |
| u32 csr; |
| }; |
| |
| struct stm32_flash_regs { |
| u32 acr; |
| u32 key; |
| u32 optkeyr; |
| u32 sr; |
| u32 cr; |
| u32 optcr; |
| u32 optcr1; |
| }; |
| |
| /* |
| * Registers access macros |
| */ |
| #define STM32_U_ID_BASE (STM32_SYSMEM_BASE + 0x7A10) |
| #define STM32_U_ID ((struct stm32_u_id_regs *)STM32_U_ID_BASE) |
| |
| #define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800) |
| #define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) |
| |
| #define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) |
| #define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) |
| |
| #define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0x3C00) |
| #define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE) |
| |
| #define STM32_FLASH_SR_BSY (1 << 16) |
| |
| #define STM32_FLASH_CR_PG (1 << 0) |
| #define STM32_FLASH_CR_SER (1 << 1) |
| #define STM32_FLASH_CR_STRT (1 << 16) |
| #define STM32_FLASH_CR_LOCK (1 << 31) |
| #define STM32_FLASH_CR_SNB_OFFSET 3 |
| |
| enum clock { |
| CLOCK_CORE, |
| CLOCK_AHB, |
| CLOCK_APB1, |
| CLOCK_APB2 |
| }; |
| |
| int configure_clocks(void); |
| unsigned long clock_get(enum clock clck); |
| |
| #endif /* _MACH_STM32_H_ */ |