blob: 48b4b2e09cd876637f5579f8777e73df2db40d3c [file] [log] [blame]
Stefan Roese2bae75a2015-04-25 06:29:56 +02001/*
2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef _CONFIG_DB_88F6820_GP_H
8#define _CONFIG_DB_88F6820_GP_H
9
10/*
11 * High Level Configuration Options (easy to change)
12 */
Stefan Roese2bae75a2015-04-25 06:29:56 +020013
Stefan Roese2bae75a2015-04-25 06:29:56 +020014#define CONFIG_DISPLAY_BOARDINFO_LATE
15
Stefan Roese2923c2d2015-08-06 14:27:36 +020016/*
17 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
18 * for DDR ECC byte filling in the SPL before loading the main
19 * U-Boot into it.
20 */
21#define CONFIG_SYS_TEXT_BASE 0x00800000
Stefan Roese2bae75a2015-04-25 06:29:56 +020022#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
23
24/*
25 * Commands configuration
26 */
27#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
Stefan Roese2bae75a2015-04-25 06:29:56 +020028#define CONFIG_CMD_ENV
Stefan Roesece2cb1d2015-08-11 12:50:58 +020029#define CONFIG_CMD_PCI
Simon Glassc649e3c2016-05-01 11:36:02 -060030#define CONFIG_SCSI
Stefan Roese2bae75a2015-04-25 06:29:56 +020031
32/* I2C */
33#define CONFIG_SYS_I2C
34#define CONFIG_SYS_I2C_MVTWSI
35#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
36#define CONFIG_SYS_I2C_SLAVE 0x0
37#define CONFIG_SYS_I2C_SPEED 100000
38
39/* SPI NOR flash default params, used by sf commands */
40#define CONFIG_SF_DEFAULT_SPEED 1000000
41#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
Stefan Roese2bae75a2015-04-25 06:29:56 +020042
Stefan Roesee80f1e82015-06-29 14:58:11 +020043/*
44 * SDIO/MMC Card Configuration
45 */
46#define CONFIG_MMC
47#define CONFIG_MMC_SDMA
48#define CONFIG_GENERIC_MMC
49#define CONFIG_SDHCI
50#define CONFIG_MV_SDHCI
51#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
52
Stefan Roese7cbaff92015-06-29 14:58:14 +020053/*
54 * SATA/SCSI/AHCI configuration
55 */
56#define CONFIG_LIBATA
57#define CONFIG_SCSI_AHCI
58#define CONFIG_SCSI_AHCI_PLAT
59#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
60#define CONFIG_SYS_SCSI_MAX_LUN 1
61#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
62 CONFIG_SYS_SCSI_MAX_LUN)
63
Stefan Roesee80f1e82015-06-29 14:58:11 +020064/* Partition support */
65#define CONFIG_DOS_PARTITION
66#define CONFIG_EFI_PARTITION
67
68/* Additional FS support/configuration */
69#define CONFIG_SUPPORT_VFAT
70
Stefan Roese59565732015-06-29 14:58:16 +020071/* USB/EHCI configuration */
Stefan Roese59565732015-06-29 14:58:16 +020072#define CONFIG_EHCI_IS_TDI
73
Stefan Roese2bae75a2015-04-25 06:29:56 +020074/* Environment in SPI NOR flash */
75#define CONFIG_ENV_IS_IN_SPI_FLASH
76#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
77#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
78#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
79
80#define CONFIG_PHY_MARVELL /* there is a marvell phy */
Stefan Roese2bae75a2015-04-25 06:29:56 +020081#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
82
Stefan Roesece2cb1d2015-08-11 12:50:58 +020083/* PCIe support */
Stefan Roese64512232015-11-25 07:37:00 +010084#ifndef CONFIG_SPL_BUILD
Stefan Roesece2cb1d2015-08-11 12:50:58 +020085#define CONFIG_PCI
86#define CONFIG_PCI_MVEBU
87#define CONFIG_PCI_PNP
88#define CONFIG_PCI_SCAN_SHOW
Stefan Roese64512232015-11-25 07:37:00 +010089#endif
Stefan Roesece2cb1d2015-08-11 12:50:58 +020090
Stefan Roese2bae75a2015-04-25 06:29:56 +020091#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
92#define CONFIG_SYS_ALT_MEMTEST
93
Kevin Smith3fd38af2015-05-18 16:09:46 +000094/* Keep device tree and initrd in lower memory so the kernel can access them */
95#define CONFIG_EXTRA_ENV_SETTINGS \
96 "fdt_high=0x10000000\0" \
97 "initrd_high=0x10000000\0"
98
Stefan Roese9e30b312015-03-25 13:35:15 +010099/* SPL */
Stefan Roese7853c502015-07-20 11:20:40 +0200100/*
101 * Select the boot device here
102 *
103 * Currently supported are:
104 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
105 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
106 */
107#define SPL_BOOT_SPI_NOR_FLASH 1
108#define SPL_BOOT_SDIO_MMC_CARD 2
109#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
110
Stefan Roese9e30b312015-03-25 13:35:15 +0100111/* Defines for SPL */
112#define CONFIG_SPL_FRAMEWORK
113#define CONFIG_SPL_SIZE (140 << 10)
114#define CONFIG_SPL_TEXT_BASE 0x40000030
115#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
116
117#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
118#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
119
Stefan Roese64512232015-11-25 07:37:00 +0100120#ifdef CONFIG_SPL_BUILD
121#define CONFIG_SYS_MALLOC_SIMPLE
122#endif
Stefan Roese9e30b312015-03-25 13:35:15 +0100123
124#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
125#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
126
Stefan Roese7853c502015-07-20 11:20:40 +0200127#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
Stefan Roese9e30b312015-03-25 13:35:15 +0100128/* SPL related SPI defines */
Stefan Roese9e30b312015-03-25 13:35:15 +0100129#define CONFIG_SPL_SPI_LOAD
Stefan Roese09a54c02015-11-20 13:51:57 +0100130#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
Stefan Roese7853c502015-07-20 11:20:40 +0200131#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
132#endif
133
134#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
135/* SPL related MMC defines */
Stefan Roese7853c502015-07-20 11:20:40 +0200136#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
137#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
138#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
139#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
140#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */
141#ifdef CONFIG_SPL_BUILD
142#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
143#endif
144#endif
Stefan Roese9e30b312015-03-25 13:35:15 +0100145
Stefan Roese2bae75a2015-04-25 06:29:56 +0200146/*
147 * mv-common.h should be defined after CMD configs since it used them
148 * to enable certain macros
149 */
150#include "mv-common.h"
151
152#endif /* _CONFIG_DB_88F6820_GP_H */