blob: b00e2f2c366dcb792a2a3e34785bdf55ac515663 [file] [log] [blame]
Weijie Gao2161f1f2020-11-12 16:36:05 +08001// SPDX-License-Identifier: GPL-2.0
2/*
3 * UART driver for MediaTek MT7620 and earlier SoCs
4 *
5 * Copyright (C) 2020 MediaTek Inc.
6 * Author: Weijie Gao <weijie.gao@mediatek.com>
7 */
8
9#include <clk.h>
10#include <div64.h>
11#include <dm.h>
12#include <errno.h>
13#include <log.h>
14#include <reset.h>
15#include <serial.h>
16#include <watchdog.h>
17#include <asm/io.h>
18#include <asm/types.h>
19#include <asm/addrspace.h>
20#include <dm/device_compat.h>
21#include <linux/err.h>
22
23#if CONFIG_IS_ENABLED(OF_PLATDATA)
24#include <dt-structs.h>
25#endif
26
27struct mt7620_serial_regs {
28 u32 rbr;
29 u32 thr;
30 u32 ier;
31 u32 iir;
32 u32 fcr;
33 u32 lcr;
34 u32 mcr;
35 u32 lsr;
36 u32 msr;
37 u32 scratch;
38 u32 dl;
39 u32 dll;
40 u32 dlm;
41 u32 ifctl;
42};
43
44#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
45
46#define UART_LSR_DR 0x01 /* Data ready */
47#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
48#define UART_LSR_TEMT 0x40 /* Xmitter empty */
49
50#define UART_MCR_DTR 0x01 /* DTR */
51#define UART_MCR_RTS 0x02 /* RTS */
52
53#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
54#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
55#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
56
57#define UART_MCRVAL (UART_MCR_DTR | \
58 UART_MCR_RTS)
59
60/* Clear & enable FIFOs */
61#define UART_FCRVAL (UART_FCR_FIFO_EN | \
62 UART_FCR_RXSR | \
63 UART_FCR_TXSR)
64
65struct mt7620_serial_plat {
66#if CONFIG_IS_ENABLED(OF_PLATDATA)
67 struct dtd_serial_mt7620 dtplat;
68#endif
69
70 struct mt7620_serial_regs __iomem *regs;
71 u32 clock;
72};
73
74static void _mt7620_serial_setbrg(struct mt7620_serial_plat *plat, int baud)
75{
76 u32 quot;
77
78 /* set divisor */
79 quot = DIV_ROUND_CLOSEST(plat->clock, 16 * baud);
80 writel(quot, &plat->regs->dl);
81
82 /* set character length and stop bits */
83 writel(UART_LCR_WLS_8, &plat->regs->lcr);
84}
85
86static int mt7620_serial_setbrg(struct udevice *dev, int baudrate)
87{
88 struct mt7620_serial_plat *plat = dev_get_plat(dev);
89
90 _mt7620_serial_setbrg(plat, baudrate);
91
92 return 0;
93}
94
95static int mt7620_serial_putc(struct udevice *dev, const char ch)
96{
97 struct mt7620_serial_plat *plat = dev_get_plat(dev);
98
99 if (!(readl(&plat->regs->lsr) & UART_LSR_THRE))
100 return -EAGAIN;
101
102 writel(ch, &plat->regs->thr);
103
104 if (ch == '\n')
Stefan Roese29caf932022-09-02 14:10:46 +0200105 schedule();
Weijie Gao2161f1f2020-11-12 16:36:05 +0800106
107 return 0;
108}
109
110static int mt7620_serial_getc(struct udevice *dev)
111{
112 struct mt7620_serial_plat *plat = dev_get_plat(dev);
113
114 if (!(readl(&plat->regs->lsr) & UART_LSR_DR))
115 return -EAGAIN;
116
117 return readl(&plat->regs->rbr);
118}
119
120static int mt7620_serial_pending(struct udevice *dev, bool input)
121{
122 struct mt7620_serial_plat *plat = dev_get_plat(dev);
123
124 if (input)
125 return (readl(&plat->regs->lsr) & UART_LSR_DR) ? 1 : 0;
126
127 return (readl(&plat->regs->lsr) & UART_LSR_THRE) ? 0 : 1;
128}
129
130static int mt7620_serial_probe(struct udevice *dev)
131{
132 struct mt7620_serial_plat *plat = dev_get_plat(dev);
133
134#if CONFIG_IS_ENABLED(OF_PLATDATA)
135 plat->regs = (void __iomem *)KSEG1ADDR(plat->dtplat.reg[0]);
136 plat->clock = plat->dtplat.clock_frequency;
137#endif
138
139 /* Disable interrupt */
140 writel(0, &plat->regs->ier);
141
142 writel(UART_MCRVAL, &plat->regs->mcr);
143 writel(UART_FCRVAL, &plat->regs->fcr);
144
145 return 0;
146}
147
Simon Glass95397382021-08-07 07:24:04 -0600148#if CONFIG_IS_ENABLED(OF_REAL)
Weijie Gao2161f1f2020-11-12 16:36:05 +0800149static int mt7620_serial_of_to_plat(struct udevice *dev)
150{
151 struct mt7620_serial_plat *plat = dev_get_plat(dev);
152 struct reset_ctl reset_uart;
153 struct clk clk;
154 int err;
155
156 err = reset_get_by_index(dev, 0, &reset_uart);
157 if (!err)
158 reset_deassert(&reset_uart);
159
160 plat->regs = dev_remap_addr_index(dev, 0);
161 if (!plat->regs) {
162 dev_err(dev, "mt7620_serial: unable to map UART registers\n");
163 return -EINVAL;
164 }
165
166 err = clk_get_by_index(dev, 0, &clk);
167 if (!err) {
168 err = clk_get_rate(&clk);
169 if (!IS_ERR_VALUE(err))
170 plat->clock = err;
171 } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
172 dev_err(dev, "mt7620_serial: failed to get clock\n");
173 return err;
174 }
175
176 if (!plat->clock)
177 plat->clock = dev_read_u32_default(dev, "clock-frequency", 0);
178
179 if (!plat->clock) {
180 dev_err(dev, "mt7620_serial: clock not defined\n");
181 return -EINVAL;
182 }
183
184 return 0;
185}
186
187static const struct udevice_id mt7620_serial_ids[] = {
188 { .compatible = "mediatek,mt7620-uart" },
189 { }
190};
191#endif
192
193static const struct dm_serial_ops mt7620_serial_ops = {
194 .putc = mt7620_serial_putc,
195 .pending = mt7620_serial_pending,
196 .getc = mt7620_serial_getc,
197 .setbrg = mt7620_serial_setbrg,
198};
199
200U_BOOT_DRIVER(serial_mt7620) = {
201 .name = "serial_mt7620",
202 .id = UCLASS_SERIAL,
Simon Glass95397382021-08-07 07:24:04 -0600203#if CONFIG_IS_ENABLED(OF_REAL)
Weijie Gao2161f1f2020-11-12 16:36:05 +0800204 .of_match = mt7620_serial_ids,
205 .of_to_plat = mt7620_serial_of_to_plat,
206#endif
207 .plat_auto = sizeof(struct mt7620_serial_plat),
208 .probe = mt7620_serial_probe,
209 .ops = &mt7620_serial_ops,
210 .flags = DM_FLAG_PRE_RELOC,
211};
212
213DM_DRIVER_ALIAS(serial_mt7620, mediatek_mt7620_uart);
214
215#ifdef CONFIG_DEBUG_UART_MT7620
216
217#include <debug_uart.h>
218
219static inline void _debug_uart_init(void)
220{
221 struct mt7620_serial_plat plat;
222
Pali Rohárb62450c2022-05-27 22:15:24 +0200223 plat.regs = (void *)CONFIG_VAL(DEBUG_UART_BASE);
Weijie Gao2161f1f2020-11-12 16:36:05 +0800224 plat.clock = CONFIG_DEBUG_UART_CLOCK;
225
226 writel(0, &plat.regs->ier);
227 writel(UART_MCRVAL, &plat.regs->mcr);
228 writel(UART_FCRVAL, &plat.regs->fcr);
229
230 _mt7620_serial_setbrg(&plat, CONFIG_BAUDRATE);
231}
232
233static inline void _debug_uart_putc(int ch)
234{
235 struct mt7620_serial_regs __iomem *regs =
Pali Rohárb62450c2022-05-27 22:15:24 +0200236 (void *)CONFIG_VAL(DEBUG_UART_BASE);
Weijie Gao2161f1f2020-11-12 16:36:05 +0800237
238 while (!(readl(&regs->lsr) & UART_LSR_THRE))
239 ;
240
241 writel(ch, &regs->thr);
242}
243
244DEBUG_UART_FUNCS
245
246#endif