blob: 4b850131c176ad3f993213f107f3de35dec44f96 [file] [log] [blame]
wdenkd4ca31c2004-01-02 14:00:00 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2000-2005
wdenkd4ca31c2004-01-02 14:00:00 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
wdenkc178d3d2004-01-24 20:25:54 +000015 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
wdenkd4ca31c2004-01-02 14:00:00 +000016 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
37#define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */
38
wdenk66ca92a2004-09-28 17:59:53 +000039#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */
40#define CFG_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */
41#define CFG_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */
42#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 /* 50 MHz - CPU default clock */
wdenkc178d3d2004-01-24 20:25:54 +000043 /* (it will be used if there is no */
44 /* 'cpuclk' variable with valid value) */
wdenkd4ca31c2004-01-02 14:00:00 +000045
wdenk75d1ea72004-01-31 20:06:54 +000046#undef CFG_MEASURE_CPUCLK /* Measure real cpu clock */
47 /* (function measure_gclk() */
48 /* will be called) */
49#ifdef CFG_MEASURE_CPUCLK
50#define CFG_8XX_XIN 10000000 /* measure_gclk() needs this */
51#endif
52
wdenkc178d3d2004-01-24 20:25:54 +000053#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
wdenkd4ca31c2004-01-02 14:00:00 +000054
55#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
56
wdenkc178d3d2004-01-24 20:25:54 +000057#define CONFIG_BOOTCOUNT_LIMIT
wdenkd4ca31c2004-01-02 14:00:00 +000058
59#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
60
61#define CONFIG_BOARD_TYPES 1 /* support board types */
62
wdenkc178d3d2004-01-24 20:25:54 +000063#define CONFIG_PREBOOT "echo;" \
wdenkd4ca31c2004-01-02 14:00:00 +000064 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
65 "echo"
66
67#undef CONFIG_BOOTARGS
68
wdenkc178d3d2004-01-24 20:25:54 +000069#define CONFIG_EXTRA_ENV_SETTINGS \
wdenkd4ca31c2004-01-02 14:00:00 +000070 "netdev=eth0\0" \
71 "nfsargs=setenv bootargs root=/dev/nfs rw " \
72 "nfsroot=$(serverip):$(rootpath)\0" \
73 "ramargs=setenv bootargs root=/dev/ram rw\0" \
74 "addip=setenv bootargs $(bootargs) " \
75 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
76 ":$(hostname):$(netdev):off panic=1\0" \
77 "flash_nfs=run nfsargs addip;" \
78 "bootm $(kernel_addr)\0" \
79 "flash_self=run ramargs addip;" \
80 "bootm $(kernel_addr) $(ramdisk_addr)\0" \
81 "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
82 "rootpath=/opt/eldk/ppc_8xx\0" \
wdenk5e4be002004-01-31 20:13:31 +000083 "bootfile=/tftpboot/TQM866M/uImage\0" \
wdenkd4ca31c2004-01-02 14:00:00 +000084 "kernel_addr=40080000\0" \
85 "ramdisk_addr=40180000\0" \
86 ""
87#define CONFIG_BOOTCOMMAND "run flash_self"
88
89#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
90#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
91
92#undef CONFIG_WATCHDOG /* watchdog disabled */
93
wdenkc178d3d2004-01-24 20:25:54 +000094#define CONFIG_STATUS_LED 1 /* Status LED enabled */
wdenkd4ca31c2004-01-02 14:00:00 +000095
96#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
97
98/* enable I2C and select the hardware/software driver */
99#undef CONFIG_HARD_I2C /* I2C with hardware support */
wdenkc178d3d2004-01-24 20:25:54 +0000100#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
wdenkd4ca31c2004-01-02 14:00:00 +0000101
102#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
103#define CFG_I2C_SLAVE 0xFE
104
105#ifdef CONFIG_SOFT_I2C
106/*
107 * Software (bit-bang) I2C driver configuration
108 */
109#define PB_SCL 0x00000020 /* PB 26 */
110#define PB_SDA 0x00000010 /* PB 27 */
111
112#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
113#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
114#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
115#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
116#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
wdenkc178d3d2004-01-24 20:25:54 +0000117 else immr->im_cpm.cp_pbdat &= ~PB_SDA
wdenkd4ca31c2004-01-02 14:00:00 +0000118#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
wdenkc178d3d2004-01-24 20:25:54 +0000119 else immr->im_cpm.cp_pbdat &= ~PB_SCL
wdenkd4ca31c2004-01-02 14:00:00 +0000120#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
121#endif /* CONFIG_SOFT_I2C */
122
123#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C256 */
wdenkc178d3d2004-01-24 20:25:54 +0000124#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
wdenkd4ca31c2004-01-02 14:00:00 +0000125#define CFG_EEPROM_PAGE_WRITE_BITS 4
126#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
127
128#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
129
130#define CONFIG_MAC_PARTITION
131#define CONFIG_DOS_PARTITION
132
wdenka6cccae2004-02-06 21:48:22 +0000133#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */
134
135#define CONFIG_TIMESTAMP /* but print image timestmps */
wdenkd4ca31c2004-01-02 14:00:00 +0000136
137#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
138 CFG_CMD_ASKENV | \
wdenk414eec32005-04-02 22:37:54 +0000139 CFG_CMD_DATE | \
wdenkd4ca31c2004-01-02 14:00:00 +0000140 CFG_CMD_DHCP | \
141 CFG_CMD_EEPROM | \
wdenk414eec32005-04-02 22:37:54 +0000142 CFG_CMD_I2C | \
wdenkd4ca31c2004-01-02 14:00:00 +0000143 CFG_CMD_IDE | \
wdenk414eec32005-04-02 22:37:54 +0000144 CFG_CMD_NFS | \
145 CFG_CMD_SNTP )
wdenkd4ca31c2004-01-02 14:00:00 +0000146
147/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
148#include <cmd_confdefs.h>
149
150/*
151 * Miscellaneous configurable options
152 */
wdenkc178d3d2004-01-24 20:25:54 +0000153#define CFG_LONGHELP /* undef to save memory */
154#define CFG_PROMPT "=> " /* Monitor Command Prompt */
wdenkd4ca31c2004-01-02 14:00:00 +0000155
156#if 0
wdenkc178d3d2004-01-24 20:25:54 +0000157#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
wdenkd4ca31c2004-01-02 14:00:00 +0000158#endif
159#ifdef CFG_HUSH_PARSER
wdenkc178d3d2004-01-24 20:25:54 +0000160#define CFG_PROMPT_HUSH_PS2 "> "
wdenkd4ca31c2004-01-02 14:00:00 +0000161#endif
162
163#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
wdenkc178d3d2004-01-24 20:25:54 +0000164#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkd4ca31c2004-01-02 14:00:00 +0000165#else
wdenkc178d3d2004-01-24 20:25:54 +0000166#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
wdenkd4ca31c2004-01-02 14:00:00 +0000167#endif
wdenkc178d3d2004-01-24 20:25:54 +0000168#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
169#define CFG_MAXARGS 16 /* max number of command args */
wdenkd4ca31c2004-01-02 14:00:00 +0000170#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
171
172#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
173#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
174
wdenkc178d3d2004-01-24 20:25:54 +0000175#define CFG_LOAD_ADDR 0x100000 /* default load address */
wdenkd4ca31c2004-01-02 14:00:00 +0000176
wdenkc178d3d2004-01-24 20:25:54 +0000177#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkd4ca31c2004-01-02 14:00:00 +0000178
179#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
180
181/*
182 * Low Level Configuration Settings
183 * (address mappings, register initial values, etc.)
184 * You should know what you are doing if you make changes here.
185 */
186/*-----------------------------------------------------------------------
187 * Internal Memory Mapped Register
188 */
189#define CFG_IMMR 0xFFF00000
190
191/*-----------------------------------------------------------------------
192 * Definitions for initial stack pointer and data area (in DPRAM)
193 */
194#define CFG_INIT_RAM_ADDR CFG_IMMR
wdenkc178d3d2004-01-24 20:25:54 +0000195#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
196#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
wdenkd4ca31c2004-01-02 14:00:00 +0000197#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
wdenkc178d3d2004-01-24 20:25:54 +0000198#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
wdenkd4ca31c2004-01-02 14:00:00 +0000199
200/*-----------------------------------------------------------------------
201 * Start addresses for the final memory configuration
202 * (Set up by the startup code)
203 * Please note that CFG_SDRAM_BASE _must_ start at 0
204 */
wdenkc178d3d2004-01-24 20:25:54 +0000205#define CFG_SDRAM_BASE 0x00000000
wdenkd4ca31c2004-01-02 14:00:00 +0000206#define CFG_FLASH_BASE 0x40000000
wdenkc178d3d2004-01-24 20:25:54 +0000207#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
wdenkd4ca31c2004-01-02 14:00:00 +0000208#define CFG_MONITOR_BASE CFG_FLASH_BASE
wdenkc178d3d2004-01-24 20:25:54 +0000209#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenkd4ca31c2004-01-02 14:00:00 +0000210
211/*
212 * For booting Linux, the board info and command line data
213 * have to be in the first 8 MB of memory, since this is
214 * the maximum mapped by the Linux kernel during initialization.
215 */
wdenkc178d3d2004-01-24 20:25:54 +0000216#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkd4ca31c2004-01-02 14:00:00 +0000217
218/*-----------------------------------------------------------------------
219 * FLASH organization
220 */
221#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
222#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
223
224#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
225#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
226
wdenkc178d3d2004-01-24 20:25:54 +0000227#define CFG_ENV_IS_IN_FLASH 1
228#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
229#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
230#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
wdenkd4ca31c2004-01-02 14:00:00 +0000231
232/* Address and size of Redundant Environment Sector */
233#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
234#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
235
236/*-----------------------------------------------------------------------
237 * Hardware Information Block
238 */
239#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
wdenkc178d3d2004-01-24 20:25:54 +0000240#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
wdenkd4ca31c2004-01-02 14:00:00 +0000241#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
242
243/*-----------------------------------------------------------------------
244 * Cache Configuration
245 */
246#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
247#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
248#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
249#endif
250
251/*-----------------------------------------------------------------------
252 * SYPCR - System Protection Control 11-9
253 * SYPCR can only be written once after reset!
254 *-----------------------------------------------------------------------
255 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
256 */
257#if defined(CONFIG_WATCHDOG)
258#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
259 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
260#else
261#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
262#endif
263
264/*-----------------------------------------------------------------------
265 * SIUMCR - SIU Module Configuration 11-6
266 *-----------------------------------------------------------------------
267 * PCMCIA config., multi-function pin tri-state
268 */
wdenkc178d3d2004-01-24 20:25:54 +0000269#ifndef CONFIG_CAN_DRIVER
wdenkd4ca31c2004-01-02 14:00:00 +0000270#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
271#else /* we must activate GPL5 in the SIUMCR for CAN */
272#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
273#endif /* CONFIG_CAN_DRIVER */
274
275/*-----------------------------------------------------------------------
276 * TBSCR - Time Base Status and Control 11-26
277 *-----------------------------------------------------------------------
278 * Clear Reference Interrupt Status, Timebase freezing enabled
279 */
280#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
281
282/*-----------------------------------------------------------------------
wdenkd4ca31c2004-01-02 14:00:00 +0000283 * PISCR - Periodic Interrupt Status and Control 11-31
284 *-----------------------------------------------------------------------
285 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
286 */
287#define CFG_PISCR (PISCR_PS | PISCR_PITF)
288
289/*-----------------------------------------------------------------------
wdenkd4ca31c2004-01-02 14:00:00 +0000290 * SCCR - System Clock and reset Control Register 15-27
291 *-----------------------------------------------------------------------
292 * Set clock output, timebase and RTC source and divider,
293 * power management and some other internal clocks
294 */
295#define SCCR_MASK SCCR_EBDF11
wdenkc178d3d2004-01-24 20:25:54 +0000296#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkd4ca31c2004-01-02 14:00:00 +0000297 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
298 SCCR_DFALCD00)
wdenkd4ca31c2004-01-02 14:00:00 +0000299
300/*-----------------------------------------------------------------------
301 * PCMCIA stuff
302 *-----------------------------------------------------------------------
303 *
304 */
305#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
306#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
307#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
308#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
309#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
310#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
311#define CFG_PCMCIA_IO_ADDR (0xEC000000)
312#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
313
314/*-----------------------------------------------------------------------
315 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
316 *-----------------------------------------------------------------------
317 */
318
wdenkc178d3d2004-01-24 20:25:54 +0000319#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
wdenkd4ca31c2004-01-02 14:00:00 +0000320
wdenkc178d3d2004-01-24 20:25:54 +0000321#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
322#undef CONFIG_IDE_LED /* LED for ide not supported */
wdenkd4ca31c2004-01-02 14:00:00 +0000323#undef CONFIG_IDE_RESET /* reset for ide not supported */
324
325#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
326#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
327
328#define CFG_ATA_IDE0_OFFSET 0x0000
329
330#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
331
332/* Offset for data I/O */
333#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
334
335/* Offset for normal register accesses */
336#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
337
338/* Offset for alternate registers */
339#define CFG_ATA_ALT_OFFSET 0x0100
340
341/*-----------------------------------------------------------------------
342 *
343 *-----------------------------------------------------------------------
344 *
345 */
wdenkc178d3d2004-01-24 20:25:54 +0000346#define CFG_DER 0
wdenkd4ca31c2004-01-02 14:00:00 +0000347
348/*
349 * Init Memory Controller:
350 *
351 * BR0/1 and OR0/1 (FLASH)
352 */
353
354#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
355#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
356
357/* used to re-map FLASH both when starting from SRAM or FLASH:
358 * restrict access enough to keep SRAM working (if any)
359 * but not too much to meddle with FLASH accesses
360 */
361#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
362#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
363
364/*
wdenkc178d3d2004-01-24 20:25:54 +0000365 * FLASH timing: Default value of OR0 after reset
wdenkd4ca31c2004-01-02 14:00:00 +0000366 */
wdenkc178d3d2004-01-24 20:25:54 +0000367#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
368 OR_SCY_15_CLK | OR_TRLX)
wdenkd4ca31c2004-01-02 14:00:00 +0000369
370#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
371#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
372#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
373
374#define CFG_OR1_REMAP CFG_OR0_REMAP
375#define CFG_OR1_PRELIM CFG_OR0_PRELIM
376#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
377
378/*
379 * BR2/3 and OR2/3 (SDRAM)
380 *
381 */
382#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
383#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
wdenkc178d3d2004-01-24 20:25:54 +0000384#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */
wdenkd4ca31c2004-01-02 14:00:00 +0000385
386/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
387#define CFG_OR_TIMING_SDRAM 0x00000A00
388
389#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
390#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
391
wdenkc178d3d2004-01-24 20:25:54 +0000392#ifndef CONFIG_CAN_DRIVER
393#define CFG_OR3_PRELIM CFG_OR2_PRELIM
wdenkd4ca31c2004-01-02 14:00:00 +0000394#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
395#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
wdenkc178d3d2004-01-24 20:25:54 +0000396#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
wdenkd4ca31c2004-01-02 14:00:00 +0000397#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
398#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
399#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
400 BR_PS_8 | BR_MS_UPMB | BR_V )
401#endif /* CONFIG_CAN_DRIVER */
402
403/*
wdenkc178d3d2004-01-24 20:25:54 +0000404 * 4096 Rows from SDRAM example configuration
405 * 1000 factor s -> ms
406 * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
407 * 4 Number of refresh cycles per period
408 * 64 Refresh cycle in ms per number of rows
wdenkd4ca31c2004-01-02 14:00:00 +0000409 */
wdenk66ca92a2004-09-28 17:59:53 +0000410#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
wdenkc178d3d2004-01-24 20:25:54 +0000411
412/*
413 * Memory Periodic Timer Prescaler
414 * Periodic timer for refresh, start with refresh rate for 40 MHz clock
wdenk66ca92a2004-09-28 17:59:53 +0000415 * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
wdenkc178d3d2004-01-24 20:25:54 +0000416 */
417#define CFG_MAMR_PTA 39
wdenkd4ca31c2004-01-02 14:00:00 +0000418
419/*
420 * For 16 MBit, refresh rates could be 31.3 us
421 * (= 64 ms / 2K = 125 / quad bursts).
422 * For a simpler initialization, 15.6 us is used instead.
423 *
424 * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
425 * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
426 */
427#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
428#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
429
430/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
431#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
432#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
433
434/*
435 * MAMR settings for SDRAM
436 */
437
438/* 8 column SDRAM */
439#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
440 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
441 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
442/* 9 column SDRAM */
443#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
444 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
445 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
wdenkc178d3d2004-01-24 20:25:54 +0000446/* 10 column SDRAM */
447#define CFG_MAMR_10COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
448 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \
449 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
wdenkd4ca31c2004-01-02 14:00:00 +0000450
451/*
452 * Internal Definitions
453 *
454 * Boot Flags
455 */
wdenkc178d3d2004-01-24 20:25:54 +0000456#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
wdenkd4ca31c2004-01-02 14:00:00 +0000457#define BOOTFLAG_WARM 0x02 /* Software reboot */
458
459#define CONFIG_SCC1_ENET
460#define CONFIG_FEC_ENET
461#define CONFIG_ETHPRIME "SCC ETHERNET"
462
463#endif /* __CONFIG_H */