Codrin Ciubotariu | 6706b11 | 2015-01-12 14:08:33 +0200 | [diff] [blame] | 1 | This file contains information for VSC9953, a Vitesse L2 Switch IP |
| 2 | which is integrated in the T1040/T1020 Freescale SoCs. |
| 3 | |
| 4 | About Device: |
| 5 | ============= |
| 6 | VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: |
| 7 | - 8192 MAC addresses |
| 8 | - Static Address provisioning |
| 9 | - Dynamic learning of MAC addresses and aging |
| 10 | - 4096 VLANs |
| 11 | - Independent and shared VLAN learning (IVL, SVL) |
| 12 | - Policing with storm control and MC/BC protection |
| 13 | - IPv4 and IPv6 multicast |
| 14 | - Jumbo frames (9.6 KB) |
| 15 | - Access Control List |
| 16 | - VLAN editing, translation and remarking |
| 17 | - RMON counters per port |
| 18 | |
| 19 | Switch interfaces: |
| 20 | - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs |
| 21 | - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) |
| 22 | to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) |
| 23 | |
| 24 | Commands Overview: |
| 25 | ============= |
| 26 | Commands supported |
Codrin Ciubotariu | 3507cf7 | 2015-12-15 15:21:04 +0200 | [diff] [blame^] | 27 | - enable/disable a port or show its configuration (speed, duplexity, status, etc.) |
| 28 | - port statistics |
| 29 | - MAC learning |
| 30 | - add/remove FDB entries |
| 31 | - Port-based VLAN |
| 32 | - Private/Shared VLAN learning |
| 33 | - VLAN ingress filtering |
Codrin Ciubotariu | 6706b11 | 2015-01-12 14:08:33 +0200 | [diff] [blame] | 34 | |
| 35 | Commands syntax |
Codrin Ciubotariu | 3507cf7 | 2015-12-15 15:21:04 +0200 | [diff] [blame^] | 36 | ethsw [port <port_no>] { enable | disable | show } - enable/disable a port; show a port's configuration |
| 37 | ethsw [port <port_no>] statistics { [help] | [clear] } - show an l2 switch port's statistics |
| 38 | ethsw [port <port_no>] learning { [help] | show | auto | disable } - enable/disable/show learning configuration on a port |
| 39 | ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } - add/delete a mac entry in FDB; use show to see FDB entries; |
| 40 | if [vlan <vid>] is missing, VID 1 will be used |
| 41 | ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port |
| 42 | ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members) |
| 43 | ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mode for a port |
| 44 | ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - configure VID source for egress tag. |
| 45 | Tag's VID could be the frame's classified VID or the PVID of the port |
| 46 | ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private |
| 47 | ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port |
Codrin Ciubotariu | 6706b11 | 2015-01-12 14:08:33 +0200 | [diff] [blame] | 48 | |
Codrin Ciubotariu | 3507cf7 | 2015-12-15 15:21:04 +0200 | [diff] [blame^] | 49 | => ethsw show |
Codrin Ciubotariu | 6706b11 | 2015-01-12 14:08:33 +0200 | [diff] [blame] | 50 | Port Status Link Speed Duplex |
| 51 | 0 enabled down 10 half |
| 52 | 1 enabled down 10 half |
| 53 | 2 enabled down 10 half |
| 54 | 3 enabled up 1000 full |
| 55 | 4 disabled down - half |
| 56 | 5 disabled down - half |
| 57 | 6 disabled down - half |
| 58 | 7 disabled down - half |
| 59 | 8 enabled up 2500 full |
| 60 | 9 enabled up 2500 full |
| 61 | => |