blob: 1a744895020cab5129ef2224c56c3e944d60140d [file] [log] [blame]
Masahiro Yamada5894ca02014-10-03 19:21:06 +09001/*
Masahiro Yamadaf8f35942015-05-29 17:30:05 +09002 * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada5894ca02014-10-03 19:21:06 +09003 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
Bin Menga1875592016-02-05 19:30:11 -08007/* U-Boot - Common settings for UniPhier Family */
Masahiro Yamada5894ca02014-10-03 19:21:06 +09008
9#ifndef __CONFIG_UNIPHIER_COMMON_H__
10#define __CONFIG_UNIPHIER_COMMON_H__
11
Masahiro Yamada233e42a2015-01-13 12:44:39 +090012#define CONFIG_I2C_EEPROM
13#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
14
Masahiro Yamadad064cbf2014-10-23 22:26:10 +090015#ifdef CONFIG_SYS_NS16550_SERIAL
Masahiro Yamada5894ca02014-10-03 19:21:06 +090016#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE
17#define CONFIG_SYS_NS16550_CLK 12288000
18#define CONFIG_SYS_NS16550_REG_SIZE -2
Masahiro Yamadad064cbf2014-10-23 22:26:10 +090019#endif
Masahiro Yamada5894ca02014-10-03 19:21:06 +090020
Masahiro Yamadaf5d0b9b2014-12-06 00:03:22 +090021/* TODO: move to Kconfig and device tree */
22#if 0
23#define CONFIG_SYS_NS16550_SERIAL
24#endif
25
26#define CONFIG_SMC911X
27
Masahiro Yamadad7728aa2015-09-22 00:27:32 +090028/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
29#define CONFIG_SMC911X_BASE 0
Masahiro Yamada5894ca02014-10-03 19:21:06 +090030#define CONFIG_SMC911X_32_BIT
31
Masahiro Yamada5894ca02014-10-03 19:21:06 +090032/*-----------------------------------------------------------------------
33 * MMU and Cache Setting
34 *----------------------------------------------------------------------*/
35
36/* Comment out the following to enable L1 cache */
37/* #define CONFIG_SYS_ICACHE_OFF */
38/* #define CONFIG_SYS_DCACHE_OFF */
39
Masahiro Yamada53c45d42015-02-27 02:27:01 +090040#define CONFIG_SYS_CACHELINE_SIZE 32
41
Masahiro Yamada5894ca02014-10-03 19:21:06 +090042/* Comment out the following to enable L2 cache */
43#define CONFIG_UNIPHIER_L2CACHE_ON
44
45#define CONFIG_DISPLAY_CPUINFO
46#define CONFIG_DISPLAY_BOARDINFO
Masahiro Yamada08fda252015-02-05 14:42:56 +090047#define CONFIG_MISC_INIT_F
Masahiro Yamada84ccd792015-02-05 14:42:54 +090048#define CONFIG_BOARD_EARLY_INIT_F
Masahiro Yamada7a3620b2014-12-06 00:03:26 +090049#define CONFIG_BOARD_EARLY_INIT_R
Masahiro Yamada5894ca02014-10-03 19:21:06 +090050#define CONFIG_BOARD_LATE_INIT
51
52#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
53
54#define CONFIG_TIMESTAMP
55
56/* FLASH related */
57#define CONFIG_MTD_DEVICE
58
59/*
60 * uncomment the following to disable FLASH related code.
61 */
62/* #define CONFIG_SYS_NO_FLASH */
63
64#define CONFIG_FLASH_CFI_DRIVER
65#define CONFIG_SYS_FLASH_CFI
66
67#define CONFIG_SYS_MAX_FLASH_SECT 256
68#define CONFIG_SYS_MONITOR_BASE 0
69#define CONFIG_SYS_FLASH_BASE 0
70
71/*
72 * flash_toggle does not work for out supoort card.
73 * We need to use flash_status_poll.
74 */
75#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
76
77#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
78
Masahiro Yamada98798422015-09-11 20:17:45 +090079#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
Masahiro Yamada5894ca02014-10-03 19:21:06 +090080
81/* serial console configuration */
82#define CONFIG_BAUDRATE 115200
83
Masahiro Yamada5894ca02014-10-03 19:21:06 +090084
85#if !defined(CONFIG_SPL_BUILD)
86#define CONFIG_USE_ARCH_MEMSET
87#define CONFIG_USE_ARCH_MEMCPY
88#endif
89
90#define CONFIG_SYS_LONGHELP /* undef to save memory */
91
92#define CONFIG_CMDLINE_EDITING /* add command line history */
Masahiro Yamada5894ca02014-10-03 19:21:06 +090093#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
94/* Print Buffer Size */
95#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
96#define CONFIG_SYS_MAXARGS 16 /* max number of command */
97/* Boot Argument Buffer Size */
98#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
99
100#define CONFIG_CONS_INDEX 1
101
Masahiro Yamadaaa8a9342016-02-16 17:08:42 +0900102/* #define CONFIG_ENV_IS_NOWHERE */
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900103/* #define CONFIG_ENV_IS_IN_NAND */
Masahiro Yamadaaa8a9342016-02-16 17:08:42 +0900104#define CONFIG_ENV_IS_IN_MMC
105#define CONFIG_ENV_OFFSET 0x80000
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900106#define CONFIG_ENV_SIZE 0x2000
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900107/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
108
Masahiro Yamadaaa8a9342016-02-16 17:08:42 +0900109#define CONFIG_SYS_MMC_ENV_DEV 0
110#define CONFIG_SYS_MMC_ENV_PART 1
111
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900112/* Time clock 1MHz */
113#define CONFIG_SYS_TIMER_RATE 1000000
114
115/*
116 * By default, ARP timeout is 5 sec.
117 * The first ARP request does not seem to work.
118 * So we need to retry ARP request anyway.
119 * We want to shrink the interval until the second ARP request.
120 */
121#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */
122
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900123#define CONFIG_SYS_MAX_NAND_DEVICE 1
124#define CONFIG_SYS_NAND_MAX_CHIPS 2
125#define CONFIG_SYS_NAND_ONFI_DETECTION
126
127#define CONFIG_NAND_DENALI_ECC_SIZE 1024
128
Masahiro Yamada8497ccc2015-09-22 00:27:34 +0900129#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3
Masahiro Yamada3365b4e2015-07-21 14:04:22 +0900130#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
131#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
132#else
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900133#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
134#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
Masahiro Yamada3365b4e2015-07-21 14:04:22 +0900135#endif
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900136
137#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
138
139#define CONFIG_SYS_NAND_USE_FLASH_BBT
140#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
141
Masahiro Yamada495deb42014-11-07 18:48:34 +0900142/* USB */
Masahiro Yamada495deb42014-11-07 18:48:34 +0900143#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
Masahiro Yamada53c45d42015-02-27 02:27:01 +0900144#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
Masahiro Yamada495deb42014-11-07 18:48:34 +0900145#define CONFIG_CMD_FAT
146#define CONFIG_FAT_WRITE
147#define CONFIG_DOS_PARTITION
148
Masahiro Yamada4aceb3f2016-02-18 19:52:49 +0900149/* SD/MMC */
150#define CONFIG_CMD_MMC
Masahiro Yamadaa55d9fe2016-02-16 17:08:39 +0900151#define CONFIG_SUPPORT_EMMC_BOOT
Masahiro Yamada4aceb3f2016-02-18 19:52:49 +0900152#define CONFIG_GENERIC_MMC
153
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900154/* memtest works on */
155#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
156#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
157
158#define CONFIG_BOOTDELAY 3
159#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900160
161/*
162 * Network Configuration
163 */
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900164#define CONFIG_SERVERIP 192.168.11.1
165#define CONFIG_IPADDR 192.168.11.10
166#define CONFIG_GATEWAYIP 192.168.11.1
167#define CONFIG_NETMASK 255.255.255.0
168
169#define CONFIG_LOADADDR 0x84000000
170#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900171
172#define CONFIG_CMDLINE_EDITING /* add command line history */
173
174#define CONFIG_BOOTCOMMAND "run $bootmode"
175
176#define CONFIG_ROOTPATH "/nfs/root/path"
177#define CONFIG_NFSBOOTCOMMAND \
178 "setenv bootargs $bootargs root=/dev/nfs rw " \
179 "nfsroot=$serverip:$rootpath " \
180 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
Masahiro Yamadad566f752016-01-21 14:56:09 +0900181 "run __nfsboot"
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900182
Masahiro Yamada421376a2015-07-21 14:04:18 +0900183#ifdef CONFIG_FIT
184#define CONFIG_BOOTFILE "fitImage"
185#define LINUXBOOT_ENV_SETTINGS \
186 "fit_addr=0x00100000\0" \
187 "fit_addr_r=0x84100000\0" \
188 "fit_size=0x00f00000\0" \
Masahiro Yamada5451b772015-09-22 00:27:38 +0900189 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900190 "bootm $fit_addr\0" \
Masahiro Yamada5451b772015-09-22 00:27:38 +0900191 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
Masahiro Yamadae037db02015-07-21 14:04:19 +0900192 "bootm $fit_addr_r\0" \
Masahiro Yamada5451b772015-09-22 00:27:38 +0900193 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
Masahiro Yamadad566f752016-01-21 14:56:09 +0900194 "bootm $fit_addr_r\0" \
195 "__nfsboot=run tftpboot\0"
Masahiro Yamada421376a2015-07-21 14:04:18 +0900196#else
Masahiro Yamada89835b32015-12-18 14:52:32 +0900197#define CONFIG_CMD_BOOTZ
198#define CONFIG_BOOTFILE "zImage"
Masahiro Yamada421376a2015-07-21 14:04:18 +0900199#define LINUXBOOT_ENV_SETTINGS \
200 "fdt_addr=0x00100000\0" \
201 "fdt_addr_r=0x84100000\0" \
202 "fdt_size=0x00008000\0" \
203 "kernel_addr=0x00200000\0" \
Masahiro Yamada89835b32015-12-18 14:52:32 +0900204 "kernel_addr_r=0x80208000\0" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900205 "kernel_size=0x00800000\0" \
206 "ramdisk_addr=0x00a00000\0" \
207 "ramdisk_addr_r=0x84a00000\0" \
208 "ramdisk_size=0x00600000\0" \
Masahiro Yamadae037db02015-07-21 14:04:19 +0900209 "ramdisk_file=rootfs.cpio.uboot\0" \
Masahiro Yamadacd5d9562016-01-21 14:56:08 +0900210 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
211 "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
212 "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
Masahiro Yamada90a6e922016-01-21 14:56:06 +0900213 "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
Masahiro Yamadacd5d9562016-01-21 14:56:08 +0900214 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
215 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
216 "run boot_common\0" \
217 "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900218 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
219 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
Masahiro Yamadacd5d9562016-01-21 14:56:08 +0900220 "run boot_common\0" \
221 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
Masahiro Yamadae037db02015-07-21 14:04:19 +0900222 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
223 "tftpboot $fdt_addr_r $fdt_file &&" \
Masahiro Yamadad566f752016-01-21 14:56:09 +0900224 "run boot_common\0" \
225 "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
226 "tftpboot $fdt_addr_r $fdt_file &&" \
227 "tftpboot $fdt_addr_r $fdt_file &&" \
228 "setenv ramdisk_addr_r - &&" \
Masahiro Yamadacd5d9562016-01-21 14:56:08 +0900229 "run boot_common\0"
Masahiro Yamada421376a2015-07-21 14:04:18 +0900230#endif
231
232#define CONFIG_EXTRA_ENV_SETTINGS \
233 "netdev=eth0\0" \
234 "verify=n\0" \
Masahiro Yamada90a6e922016-01-21 14:56:06 +0900235 "nor_base=0x42000000\0" \
Masahiro Yamadac231c432016-02-16 17:08:41 +0900236 "emmcupdate=mmcsetn &&" \
237 "mmc partconf $mmc_first_dev 0 1 1 &&" \
238 "mmc erase 0 800 &&" \
239 "tftpboot u-boot-spl.bin &&" \
240 "mmc write $loadaddr 0 80 &&" \
241 "tftpboot u-boot.img &&" \
242 "mmc write $loadaddr 80 780\0" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900243 "nandupdate=nand erase 0 0x00100000 &&" \
Masahiro Yamada3cb9abc2016-02-02 12:53:31 +0900244 "tftpboot u-boot-spl.bin &&" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900245 "nand write $loadaddr 0 0x00010000 &&" \
Masahiro Yamada3cb9abc2016-02-02 12:53:31 +0900246 "tftpboot u-boot.img &&" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900247 "nand write $loadaddr 0x00010000 0x000f0000\0" \
Masahiro Yamada421376a2015-07-21 14:04:18 +0900248 LINUXBOOT_ENV_SETTINGS
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900249
Masahiro Yamada17bd4a22016-01-09 02:12:26 +0900250#define CONFIG_SYS_BOOTMAPSZ 0x20000000
251
Masahiro Yamadacf88aff2015-09-11 20:17:49 +0900252#define CONFIG_SYS_SDRAM_BASE 0x80000000
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900253#define CONFIG_NR_DRAM_BANKS 2
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900254
Masahiro Yamada8497ccc2015-09-22 00:27:34 +0900255#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) || \
256 defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
257 defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
Masahiro Yamadaf5d0b9b2014-12-06 00:03:22 +0900258#define CONFIG_SPL_TEXT_BASE 0x00040000
Masahiro Yamada323d1f92015-09-22 00:27:39 +0900259#else
Masahiro Yamadaf5d0b9b2014-12-06 00:03:22 +0900260#define CONFIG_SPL_TEXT_BASE 0x00100000
261#endif
262
Masahiro Yamada755c7d92016-02-02 21:11:28 +0900263#define CONFIG_SPL_STACK (0x00100000)
Masahiro Yamada8cddc272015-03-23 00:07:28 +0900264#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900265
Masahiro Yamadaa2860392015-03-23 00:07:24 +0900266#define CONFIG_PANIC_HANG
267
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900268#define CONFIG_SPL_FRAMEWORK
Masahiro Yamada499785b2015-03-23 00:07:25 +0900269#define CONFIG_SPL_SERIAL_SUPPORT
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900270#define CONFIG_SPL_NAND_SUPPORT
Masahiro Yamadaa55d9fe2016-02-16 17:08:39 +0900271#define CONFIG_SPL_MMC_SUPPORT
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900272
273#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
274#define CONFIG_SPL_LIBGENERIC_SUPPORT
275
276#define CONFIG_SPL_BOARD_INIT
277
278#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
Masahiro Yamadaa55d9fe2016-02-16 17:08:39 +0900279#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900280
Masahiro Yamada6a3cffe2015-03-23 00:07:27 +0900281#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
282
Masahiro Yamada5894ca02014-10-03 19:21:06 +0900283#endif /* __CONFIG_UNIPHIER_COMMON_H__ */