arch/powerpc/cpu/mpc85xx/cpu_init.c - github/trini/u-boot - Gitiles

 /*
  * Copyright 2007-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2003 Motorola Inc.
  * Modified by Xianghua Xiao, X.Xiao@motorola.com
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <watchdog.h>
 #include <asm/processor.h>
 #include <ioports.h>
 #include <sata.h>
 #include <fm_eth.h>
 #include <asm/io.h>
 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_srio.h>
 #include <linux/compiler.h>
 #include "mp.h"
 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #include <nand.h>
 #include <errno.h>
 #endif

 #include "../../../../drivers/block/fsl_sata.h"

 DECLARE_GLOBAL_DATA_PTR;

 #ifdef CONFIG_QE
 extern qe_iop_conf_t qe_iop_conf_tab[];
 extern void qe_config_iopin(u8 port, u8 pin, int dir,
 				int open_drain, int assign);
 extern void qe_init(uint qe_base);
 extern void qe_reset(void);

 static void config_qe_ioports(void)
 {
 	u8      port, pin;
 	int     dir, open_drain, assign;
 	int     i;

 	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
 		port		= qe_iop_conf_tab[i].port;
 		pin		= qe_iop_conf_tab[i].pin;
 		dir		= qe_iop_conf_tab[i].dir;
 		open_drain	= qe_iop_conf_tab[i].open_drain;
 		assign		= qe_iop_conf_tab[i].assign;
 		qe_config_iopin(port, pin, dir, open_drain, assign);
 	}
 }
 #endif

 #ifdef CONFIG_CPM2
 void config_8560_ioports (volatile ccsr_cpm_t * cpm)
 {
 	int portnum;

 	for (portnum = 0; portnum < 4; portnum++) {
 		uint pmsk = 0,
 		     ppar = 0,
 		     psor = 0,
 		     pdir = 0,
 		     podr = 0,
 		     pdat = 0;
 		iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
 		iop_conf_t *eiopc = iopc + 32;
 		uint msk = 1;

 		/*
 		 * NOTE:
 		 * index 0 refers to pin 31,
 		 * index 31 refers to pin 0
 		 */
 		while (iopc < eiopc) {
 			if (iopc->conf) {
 				pmsk |= msk;
 				if (iopc->ppar)
 					ppar |= msk;
 				if (iopc->psor)
 					psor |= msk;
 				if (iopc->pdir)
 					pdir |= msk;
 				if (iopc->podr)
 					podr |= msk;
 				if (iopc->pdat)
 					pdat |= msk;
 			}

 			msk <<= 1;
 			iopc++;
 		}

 		if (pmsk != 0) {
 			volatile ioport_t *iop = ioport_addr (cpm, portnum);
 			uint tpmsk = ~pmsk;

 			/*
 			 * the (somewhat confused) paragraph at the
 			 * bottom of page 35-5 warns that there might
 			 * be "unknown behaviour" when programming
 			 * PSORx and PDIRx, if PPARx = 1, so I
 			 * decided this meant I had to disable the
 			 * dedicated function first, and enable it
 			 * last.
 			 */
 			iop->ppar &= tpmsk;
 			iop->psor = (iop->psor & tpmsk) | psor;
 			iop->podr = (iop->podr & tpmsk) | podr;
 			iop->pdat = (iop->pdat & tpmsk) | pdat;
 			iop->pdir = (iop->pdir & tpmsk) | pdir;
 			iop->ppar |= ppar;
 		}
 	}
 }
 #endif

 #ifdef CONFIG_SYS_FSL_CPC
 static void enable_cpc(void)
 {
 	int i;
 	u32 size = 0;

 	cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;

 	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
 		u32 cpccfg0 = in_be32(&cpc->cpccfg0);
 		size += CPC_CFG0_SZ_K(cpccfg0);
 #ifdef CONFIG_RAMBOOT_PBL
 		if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
 			/* find and disable LAW of SRAM */
 			struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);

 			if (law.index == -1) {
 				printf("\nFatal error happened\n");
 				return;
 			}
 			disable_law(law.index);

 			clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
 			out_be32(&cpc->cpccsr0, 0);
 			out_be32(&cpc->cpcsrcr0, 0);
 		}
 #endif

 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
 		setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
 		setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
 #endif

 		out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
 		/* Read back to sync write */
 		in_be32(&cpc->cpccsr0);

 	}

 	printf("Corenet Platform Cache: %d KB enabled\n", size);
 }

 void invalidate_cpc(void)
 {
 	int i;
 	cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;

 	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
 		/* skip CPC when it used as all SRAM */
 		if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
 			continue;
 		/* Flash invalidate the CPC and clear all the locks */
 		out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
 		while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
 			;
 	}
 }
 #else
 #define enable_cpc()
 #define invalidate_cpc()
 #endif /* CONFIG_SYS_FSL_CPC */

 /*
  * Breathe some life into the CPU...
  *
  * Set up the memory map
  * initialize a bunch of registers
  */

 #ifdef CONFIG_FSL_CORENET
 static void corenet_tb_init(void)
 {
 	volatile ccsr_rcpm_t *rcpm =
 		(void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
 	volatile ccsr_pic_t *pic =
 		(void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
 	u32 whoami = in_be32(&pic->whoami);

 	/* Enable the timebase register for this core */
 	out_be32(&rcpm->ctbenrl, (1 << whoami));
 }
 #endif

 void cpu_init_f (void)
 {
 	extern void m8560_cpm_reset (void);
 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 #if defined(CONFIG_SECURE_BOOT)
 	struct law_entry law;
 #endif
 #ifdef CONFIG_MPC8548
 	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	uint svr = get_svr();

 	/*
 	 * CPU2 errata workaround: A core hang possible while executing
 	 * a msync instruction and a snoopable transaction from an I/O
 	 * master tagged to make quick forward progress is present.
 	 * Fixed in silicon rev 2.1.
 	 */
 	if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
 		out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
 #endif

 	disable_tlb(14);
 	disable_tlb(15);

 #if defined(CONFIG_SECURE_BOOT)
 	/* Disable the LAW created for NOR flash by the PBI commands */
 	law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
 	if (law.index != -1)
 		disable_law(law.index);
 #endif

 #ifdef CONFIG_CPM2
 	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 #endif

        init_early_memctl_regs();

 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
 #endif
 #ifdef CONFIG_QE
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif
 #ifdef CONFIG_FSL_CORENET
 	corenet_tb_init();
 #endif
 	init_used_tlb_cams();

 	/* Invalidate the CPC before DDR gets enabled */
 	invalidate_cpc();

  #ifdef CONFIG_SYS_DCSRBAR_PHYS
 	/* set DCSRCR so that DCSR space is 1G */
 	setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
 	in_be32(&gur->dcsrcr);
 #endif

 }

 /* Implement a dummy function for those platforms w/o SERDES */
 static void __fsl_serdes__init(void)
 {
 	return ;
 }
 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);

 /*
  * Initialize L2 as cache.
  *
  * The newer 8548, etc, parts have twice as much cache, but
  * use the same bit-encoding as the older 8555, etc, parts.
  *
  */
 int cpu_init_r(void)
 {
 	__maybe_unused u32 svr = get_svr();
 #ifdef CONFIG_SYS_LBC_LCRR
 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 #endif

 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
 	flush_dcache();
 	mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
 	sync();
 #endif

 	puts ("L2:    ");

 #if defined(CONFIG_L2_CACHE)
 	volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	volatile uint cache_ctl;
 	uint ver;
 	u32 l2siz_field;

 	ver = SVR_SOC_VER(svr);

 	asm("msync;isync");
 	cache_ctl = l2cache->l2ctl;

 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
 	if (cache_ctl & MPC85xx_L2CTL_L2E) {
 		/* Clear L2 SRAM memory-mapped base address */
 		out_be32(&l2cache->l2srbar0, 0x0);
 		out_be32(&l2cache->l2srbar1, 0x0);

 		/* set MBECCDIS=0, SBECCDIS=0 */
 		clrbits_be32(&l2cache->l2errdis,
 				(MPC85xx_L2ERRDIS_MBECC |
 				 MPC85xx_L2ERRDIS_SBECC));

 		/* set L2E=0, L2SRAM=0 */
 		clrbits_be32(&l2cache->l2ctl,
 				(MPC85xx_L2CTL_L2E |
 				 MPC85xx_L2CTL_L2SRAM_ENTIRE));
 	}
 #endif

 	l2siz_field = (cache_ctl >> 28) & 0x3;

 	switch (l2siz_field) {
 	case 0x0:
 		printf(" unknown size (0x%08x)\n", cache_ctl);
 		return -1;
 		break;
 	case 0x1:
 		if (ver == SVR_8540 || ver == SVR_8560   ||
 		    ver == SVR_8541 || ver == SVR_8541_E ||
 		    ver == SVR_8555 || ver == SVR_8555_E) {
 			puts("128 KB ");
 			/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
 			cache_ctl = 0xc4000000;
 		} else {
 			puts("256 KB ");
 			cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
 		}
 		break;
 	case 0x2:
 		if (ver == SVR_8540 || ver == SVR_8560   ||
 		    ver == SVR_8541 || ver == SVR_8541_E ||
 		    ver == SVR_8555 || ver == SVR_8555_E) {
 			puts("256 KB ");
 			/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
 			cache_ctl = 0xc8000000;
 		} else {
 			puts ("512 KB ");
 			/* set L2E=1, L2I=1, & L2SRAM=0 */
 			cache_ctl = 0xc0000000;
 		}
 		break;
 	case 0x3:
 		puts("1024 KB ");
 		/* set L2E=1, L2I=1, & L2SRAM=0 */
 		cache_ctl = 0xc0000000;
 		break;
 	}

 	if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
 		puts("already enabled");
 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
 		u32 l2srbar = l2cache->l2srbar0;
 		if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
 				&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
 			l2srbar = CONFIG_SYS_INIT_L2_ADDR;
 			l2cache->l2srbar0 = l2srbar;
 			printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
 		}
 #endif /* CONFIG_SYS_INIT_L2_ADDR */
 		puts("\n");
 	} else {
 		asm("msync;isync");
 		l2cache->l2ctl = cache_ctl; /* invalidate & enable */
 		asm("msync;isync");
 		puts("enabled\n");
 	}
 #elif defined(CONFIG_BACKSIDE_L2_CACHE)
 	if ((SVR_SOC_VER(svr) == SVR_P2040) ||
 	    (SVR_SOC_VER(svr) == SVR_P2040_E)) {
 		puts("N/A\n");
 		goto skip_l2;
 	}

 	u32 l2cfg0 = mfspr(SPRN_L2CFG0);

 	/* invalidate the L2 cache */
 	mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
 	while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
 		;

 #ifdef CONFIG_SYS_CACHE_STASHING
 	/* set stash id to (coreID) * 2 + 32 + L2 (1) */
 	mtspr(SPRN_L2CSR1, (32 + 1));
 #endif

 	/* enable the cache */
 	mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);

 	if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
 		while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
 			;
 		printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
 	}

 skip_l2:
 #else
 	puts("disabled\n");
 #endif

 	enable_cpc();

 	/* needs to be in ram since code uses global static vars */
 	fsl_serdes_init();

 #ifdef CONFIG_SYS_SRIO
 	srio_init();
 #ifdef CONFIG_SRIOBOOT_MASTER
 	srio_boot_master();
 #ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
 	srio_boot_master_release_slave();
 #endif
 #endif
 #endif

 #if defined(CONFIG_MP)
 	setup_mp();
 #endif

 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
 	{
 		void *p;
 		p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
 		setbits_be32(p, 1 << (31 - 14));
 	}
 #endif

 #ifdef CONFIG_SYS_LBC_LCRR
 	/*
 	 * Modify the CLKDIV field of LCRR register to improve the writing
 	 * speed for NOR flash.
 	 */
 	clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
 	__raw_readl(&lbc->lcrr);
 	isync();
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
 	udelay(100);
 #endif
 #endif

 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
 	{
 		ccsr_usb_phy_t *usb_phy1 =
 			(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
 		out_be32(&usb_phy1->usb_enable_override,
 				CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
 	}
 #endif
 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
 	{
 		ccsr_usb_phy_t *usb_phy2 =
 			(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
 		out_be32(&usb_phy2->usb_enable_override,
 				CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
 	}
 #endif

 #ifdef CONFIG_FMAN_ENET
 	fman_enet_init();
 #endif

 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
 	/*
 	 * For P1022/1013 Rev1.0 silicon, after power on SATA host
 	 * controller is configured in legacy mode instead of the
 	 * expected enterprise mode. Software needs to clear bit[28]
 	 * of HControl register to change to enterprise mode from
 	 * legacy mode.  We assume that the controller is offline.
 	 */
 	if (IS_SVR_REV(svr, 1, 0) &&
 	    ((SVR_SOC_VER(svr) == SVR_P1022) ||
 	     (SVR_SOC_VER(svr) == SVR_P1022_E) ||
 	     (SVR_SOC_VER(svr) == SVR_P1013) ||
 	     (SVR_SOC_VER(svr) == SVR_P1013_E))) {
 		fsl_sata_reg_t *reg;

 		/* first SATA controller */
 		reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
 		clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);

 		/* second SATA controller */
 		reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
 		clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
 	}
 #endif


 	return 0;
 }

 extern void setup_ivors(void);

 void arch_preboot_os(void)
 {
 	u32 msr;

 	/*
 	 * We are changing interrupt offsets and are about to boot the OS so
 	 * we need to make sure we disable all async interrupts. EE is already
 	 * disabled by the time we get called.
 	 */
 	msr = mfmsr();
 	msr &= ~(MSR_ME|MSR_CE|MSR_DE);
 	mtmsr(msr);

 	setup_ivors();
 }

 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
 int sata_initialize(void)
 {
 	if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
 		return __sata_initialize();

 	return 1;
 }
 #endif

 void cpu_secondary_init_r(void)
 {
 #ifdef CONFIG_QE
 	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
 	int ret;
 	size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;

 	/* load QE firmware from NAND flash to DDR first */
 	ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
 			&fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);

 	if (ret && ret == -EUCLEAN) {
 		printf ("NAND read for QE firmware at offset %x failed %d\n",
 				CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
 	}
 #endif
 	qe_init(qe_base);
 	qe_reset();
 #endif
 }
	/*
	* Copyright 2007-2011 Freescale Semiconductor, Inc.
	*
	* (C) Copyright 2003 Motorola Inc.
	* Modified by Xianghua Xiao, X.Xiao@motorola.com
	*
	* (C) Copyright 2000
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <watchdog.h>
	#include <asm/processor.h>
	#include <ioports.h>
	#include <sata.h>
	#include <fm_eth.h>
	#include <asm/io.h>
	#include <asm/cache.h>
	#include <asm/mmu.h>
	#include <asm/fsl_law.h>
	#include <asm/fsl_serdes.h>
	#include <asm/fsl_srio.h>
	#include <linux/compiler.h>
	#include "mp.h"
	#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
	#include <nand.h>
	#include <errno.h>
	#endif

	#include "../../../../drivers/block/fsl_sata.h"

	DECLARE_GLOBAL_DATA_PTR;

	#ifdef CONFIG_QE
	extern qe_iop_conf_t qe_iop_conf_tab[];
	extern void qe_config_iopin(u8 port, u8 pin, int dir,
	int open_drain, int assign);
	extern void qe_init(uint qe_base);
	extern void qe_reset(void);

	static void config_qe_ioports(void)
	{
	u8 port, pin;
	int dir, open_drain, assign;
	int i;

	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
	port = qe_iop_conf_tab[i].port;
	pin = qe_iop_conf_tab[i].pin;
	dir = qe_iop_conf_tab[i].dir;
	open_drain = qe_iop_conf_tab[i].open_drain;
	assign = qe_iop_conf_tab[i].assign;
	qe_config_iopin(port, pin, dir, open_drain, assign);
	}
	}
	#endif

	#ifdef CONFIG_CPM2
	void config_8560_ioports (volatile ccsr_cpm_t * cpm)
	{
	int portnum;

	for (portnum = 0; portnum < 4; portnum++) {
	uint pmsk = 0,
	ppar = 0,
	psor = 0,
	pdir = 0,
	podr = 0,
	pdat = 0;
	iop_conf_t iopc = (iop_conf_t ) & iop_conf_tab[portnum][0];
	iop_conf_t *eiopc = iopc + 32;
	uint msk = 1;

	/*
	* NOTE:
	* index 0 refers to pin 31,
	* index 31 refers to pin 0
	*/
	while (iopc < eiopc) {
	if (iopc->conf) {
	pmsk \|= msk;
	if (iopc->ppar)
	ppar \|= msk;
	if (iopc->psor)
	psor \|= msk;
	if (iopc->pdir)
	pdir \|= msk;
	if (iopc->podr)
	podr \|= msk;
	if (iopc->pdat)
	pdat \|= msk;
	}

	msk <<= 1;
	iopc++;
	}

	if (pmsk != 0) {
	volatile ioport_t *iop = ioport_addr (cpm, portnum);
	uint tpmsk = ~pmsk;

	/*
	* the (somewhat confused) paragraph at the
	* bottom of page 35-5 warns that there might
	* be "unknown behaviour" when programming
	* PSORx and PDIRx, if PPARx = 1, so I
	* decided this meant I had to disable the
	* dedicated function first, and enable it
	* last.
	*/
	iop->ppar &= tpmsk;
	iop->psor = (iop->psor & tpmsk) \| psor;
	iop->podr = (iop->podr & tpmsk) \| podr;
	iop->pdat = (iop->pdat & tpmsk) \| pdat;
	iop->pdir = (iop->pdir & tpmsk) \| pdir;
	iop->ppar \|= ppar;
	}
	}
	}
	#endif

	#ifdef CONFIG_SYS_FSL_CPC
	static void enable_cpc(void)
	{
	int i;
	u32 size = 0;

	cpc_corenet_t cpc = (cpc_corenet_t )CONFIG_SYS_FSL_CPC_ADDR;

	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
	u32 cpccfg0 = in_be32(&cpc->cpccfg0);
	size += CPC_CFG0_SZ_K(cpccfg0);
	#ifdef CONFIG_RAMBOOT_PBL
	if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
	/* find and disable LAW of SRAM */
	struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);

	if (law.index == -1) {
	printf("\nFatal error happened\n");
	return;
	}
	disable_law(law.index);

	clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);
	out_be32(&cpc->cpccsr0, 0);
	out_be32(&cpc->cpcsrcr0, 0);
	}
	#endif

	#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
	setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
	#endif
	#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
	setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
	#endif

	out_be32(&cpc->cpccsr0, CPC_CSR0_CE \| CPC_CSR0_PE);
	/* Read back to sync write */
	in_be32(&cpc->cpccsr0);

	}

	printf("Corenet Platform Cache: %d KB enabled\n", size);
	}

	void invalidate_cpc(void)
	{
	int i;
	cpc_corenet_t cpc = (cpc_corenet_t )CONFIG_SYS_FSL_CPC_ADDR;

	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
	/* skip CPC when it used as all SRAM */
	if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)
	continue;
	/* Flash invalidate the CPC and clear all the locks */
	out_be32(&cpc->cpccsr0, CPC_CSR0_FI \| CPC_CSR0_LFC);
	while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI \| CPC_CSR0_LFC))
	;
	}
	}
	#else
	#define enable_cpc()
	#define invalidate_cpc()
	#endif /* CONFIG_SYS_FSL_CPC */

	/*
	* Breathe some life into the CPU...
	*
	* Set up the memory map
	* initialize a bunch of registers
	*/

	#ifdef CONFIG_FSL_CORENET
	static void corenet_tb_init(void)
	{
	volatile ccsr_rcpm_t *rcpm =
	(void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
	volatile ccsr_pic_t *pic =
	(void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
	u32 whoami = in_be32(&pic->whoami);

	/* Enable the timebase register for this core */
	out_be32(&rcpm->ctbenrl, (1 << whoami));
	}
	#endif

	void cpu_init_f (void)
	{
	extern void m8560_cpm_reset (void);
	#ifdef CONFIG_SYS_DCSRBAR_PHYS
	ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	#endif
	#if defined(CONFIG_SECURE_BOOT)
	struct law_entry law;
	#endif
	#ifdef CONFIG_MPC8548
	ccsr_local_ecm_t ecm = (void )(CONFIG_SYS_MPC85xx_ECM_ADDR);
	uint svr = get_svr();

	/*
	* CPU2 errata workaround: A core hang possible while executing
	* a msync instruction and a snoopable transaction from an I/O
	* master tagged to make quick forward progress is present.
	* Fixed in silicon rev 2.1.
	*/
	if ((SVR_MAJ(svr) == 1) \|\| ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
	out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) \| (1 << 16));
	#endif

	disable_tlb(14);
	disable_tlb(15);

	#if defined(CONFIG_SECURE_BOOT)
	/* Disable the LAW created for NOR flash by the PBI commands */
	law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
	if (law.index != -1)
	disable_law(law.index);
	#endif

	#ifdef CONFIG_CPM2
	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
	#endif

	init_early_memctl_regs();

	#if defined(CONFIG_CPM2)
	m8560_cpm_reset();
	#endif
	#ifdef CONFIG_QE
	/* Config QE ioports */
	config_qe_ioports();
	#endif
	#if defined(CONFIG_FSL_DMA)
	dma_init();
	#endif
	#ifdef CONFIG_FSL_CORENET
	corenet_tb_init();
	#endif
	init_used_tlb_cams();

	/* Invalidate the CPC before DDR gets enabled */
	invalidate_cpc();

	#ifdef CONFIG_SYS_DCSRBAR_PHYS
	/* set DCSRCR so that DCSR space is 1G */
	setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
	in_be32(&gur->dcsrcr);
	#endif

	}

	/* Implement a dummy function for those platforms w/o SERDES */
	static void __fsl_serdes__init(void)
	{
	return ;
	}
	__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);

	/*
	* Initialize L2 as cache.
	*
	* The newer 8548, etc, parts have twice as much cache, but
	* use the same bit-encoding as the older 8555, etc, parts.
	*
	*/
	int cpu_init_r(void)
	{
	__maybe_unused u32 svr = get_svr();
	#ifdef CONFIG_SYS_LBC_LCRR
	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
	#endif

	#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
	flush_dcache();
	mtspr(L1CSR2, (mfspr(L1CSR2) \| L1CSR2_DCWS));
	sync();
	#endif

	puts ("L2: ");

	#if defined(CONFIG_L2_CACHE)
	volatile ccsr_l2cache_t l2cache = (void )CONFIG_SYS_MPC85xx_L2_ADDR;
	volatile uint cache_ctl;
	uint ver;
	u32 l2siz_field;

	ver = SVR_SOC_VER(svr);

	asm("msync;isync");
	cache_ctl = l2cache->l2ctl;

	#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
	if (cache_ctl & MPC85xx_L2CTL_L2E) {
	/* Clear L2 SRAM memory-mapped base address */
	out_be32(&l2cache->l2srbar0, 0x0);
	out_be32(&l2cache->l2srbar1, 0x0);

	/* set MBECCDIS=0, SBECCDIS=0 */
	clrbits_be32(&l2cache->l2errdis,
	(MPC85xx_L2ERRDIS_MBECC \|
	MPC85xx_L2ERRDIS_SBECC));

	/* set L2E=0, L2SRAM=0 */
	clrbits_be32(&l2cache->l2ctl,
	(MPC85xx_L2CTL_L2E \|
	MPC85xx_L2CTL_L2SRAM_ENTIRE));
	}
	#endif

	l2siz_field = (cache_ctl >> 28) & 0x3;

	switch (l2siz_field) {
	case 0x0:
	printf(" unknown size (0x%08x)\n", cache_ctl);
	return -1;
	break;
	case 0x1:
	if (ver == SVR_8540 \|\| ver == SVR_8560 \|\|
	ver == SVR_8541 \|\| ver == SVR_8541_E \|\|
	ver == SVR_8555 \|\| ver == SVR_8555_E) {
	puts("128 KB ");
	/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
	cache_ctl = 0xc4000000;
	} else {
	puts("256 KB ");
	cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
	}
	break;
	case 0x2:
	if (ver == SVR_8540 \|\| ver == SVR_8560 \|\|
	ver == SVR_8541 \|\| ver == SVR_8541_E \|\|
	ver == SVR_8555 \|\| ver == SVR_8555_E) {
	puts("256 KB ");
	/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
	cache_ctl = 0xc8000000;
	} else {
	puts ("512 KB ");
	/* set L2E=1, L2I=1, & L2SRAM=0 */
	cache_ctl = 0xc0000000;
	}
	break;
	case 0x3:
	puts("1024 KB ");
	/* set L2E=1, L2I=1, & L2SRAM=0 */
	cache_ctl = 0xc0000000;
	break;
	}

	if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
	puts("already enabled");
	#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
	u32 l2srbar = l2cache->l2srbar0;
	if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
	&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
	l2srbar = CONFIG_SYS_INIT_L2_ADDR;
	l2cache->l2srbar0 = l2srbar;
	printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
	}
	#endif /* CONFIG_SYS_INIT_L2_ADDR */
	puts("\n");
	} else {
	asm("msync;isync");
	l2cache->l2ctl = cache_ctl; /* invalidate & enable */
	asm("msync;isync");
	puts("enabled\n");
	}
	#elif defined(CONFIG_BACKSIDE_L2_CACHE)
	if ((SVR_SOC_VER(svr) == SVR_P2040) \|\|
	(SVR_SOC_VER(svr) == SVR_P2040_E)) {
	puts("N/A\n");
	goto skip_l2;
	}

	u32 l2cfg0 = mfspr(SPRN_L2CFG0);

	/* invalidate the L2 cache */
	mtspr(SPRN_L2CSR0, (L2CSR0_L2FI\|L2CSR0_L2LFC));
	while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI\|L2CSR0_L2LFC))
	;

	#ifdef CONFIG_SYS_CACHE_STASHING
	/* set stash id to (coreID) * 2 + 32 + L2 (1) */
	mtspr(SPRN_L2CSR1, (32 + 1));
	#endif

	/* enable the cache */
	mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);

	if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
	while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
	;
	printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
	}

	skip_l2:
	#else
	puts("disabled\n");
	#endif

	enable_cpc();

	/* needs to be in ram since code uses global static vars */
	fsl_serdes_init();

	#ifdef CONFIG_SYS_SRIO
	srio_init();
	#ifdef CONFIG_SRIOBOOT_MASTER
	srio_boot_master();
	#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
	srio_boot_master_release_slave();
	#endif
	#endif
	#endif

	#if defined(CONFIG_MP)
	setup_mp();
	#endif

	#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
	{
	void *p;
	p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
	setbits_be32(p, 1 << (31 - 14));
	}
	#endif

	#ifdef CONFIG_SYS_LBC_LCRR
	/*
	* Modify the CLKDIV field of LCRR register to improve the writing
	* speed for NOR flash.
	*/
	clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
	__raw_readl(&lbc->lcrr);
	isync();
	#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
	udelay(100);
	#endif
	#endif

	#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
	{
	ccsr_usb_phy_t *usb_phy1 =
	(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
	out_be32(&usb_phy1->usb_enable_override,
	CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
	}
	#endif
	#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
	{
	ccsr_usb_phy_t *usb_phy2 =
	(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
	out_be32(&usb_phy2->usb_enable_override,
	CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
	}
	#endif

	#ifdef CONFIG_FMAN_ENET
	fman_enet_init();
	#endif

	#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
	/*
	* For P1022/1013 Rev1.0 silicon, after power on SATA host
	* controller is configured in legacy mode instead of the
	* expected enterprise mode. Software needs to clear bit[28]
	* of HControl register to change to enterprise mode from
	* legacy mode. We assume that the controller is offline.
	*/
	if (IS_SVR_REV(svr, 1, 0) &&
	((SVR_SOC_VER(svr) == SVR_P1022) \|\|
	(SVR_SOC_VER(svr) == SVR_P1022_E) \|\|
	(SVR_SOC_VER(svr) == SVR_P1013) \|\|
	(SVR_SOC_VER(svr) == SVR_P1013_E))) {
	fsl_sata_reg_t *reg;

	/* first SATA controller */
	reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR;
	clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);

	/* second SATA controller */
	reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR;
	clrbits_le32(&reg->hcontrol, HCONTROL_ENTERPRISE_EN);
	}
	#endif


	return 0;
	}

	extern void setup_ivors(void);

	void arch_preboot_os(void)
	{
	u32 msr;

	/*
	* We are changing interrupt offsets and are about to boot the OS so
	* we need to make sure we disable all async interrupts. EE is already
	* disabled by the time we get called.
	*/
	msr = mfmsr();
	msr &= ~(MSR_ME\|MSR_CE\|MSR_DE);
	mtmsr(msr);

	setup_ivors();
	}

	#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
	int sata_initialize(void)
	{
	if (is_serdes_configured(SATA1) \|\| is_serdes_configured(SATA2))
	return __sata_initialize();

	return 1;
	}
	#endif

	void cpu_secondary_init_r(void)
	{
	#ifdef CONFIG_QE
	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
	#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
	int ret;
	size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;

	/* load QE firmware from NAND flash to DDR first */
	ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
	&fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);

	if (ret && ret == -EUCLEAN) {
	printf ("NAND read for QE firmware at offset %x failed %d\n",
	CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
	}
	#endif
	qe_init(qe_base);
	qe_reset();
	#endif
	}