blob: a34e2515e8002416f887a6a764ef0717f0173fbb [file] [log] [blame]
/*
* Copyright 2004,2007,2008 Freescale Semiconductor, Inc.
* (C) Copyright 2002, 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <tsec.h>
#include <netdev.h>
#include <asm/cache.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(8533, 8533),
CPU_TYPE_ENTRY(8533, 8533_E),
CPU_TYPE_ENTRY(8536, 8536),
CPU_TYPE_ENTRY(8536, 8536_E),
CPU_TYPE_ENTRY(8540, 8540),
CPU_TYPE_ENTRY(8541, 8541),
CPU_TYPE_ENTRY(8541, 8541_E),
CPU_TYPE_ENTRY(8543, 8543),
CPU_TYPE_ENTRY(8543, 8543_E),
CPU_TYPE_ENTRY(8544, 8544),
CPU_TYPE_ENTRY(8544, 8544_E),
CPU_TYPE_ENTRY(8545, 8545),
CPU_TYPE_ENTRY(8545, 8545_E),
CPU_TYPE_ENTRY(8547, 8547_E),
CPU_TYPE_ENTRY(8548, 8548),
CPU_TYPE_ENTRY(8548, 8548_E),
CPU_TYPE_ENTRY(8555, 8555),
CPU_TYPE_ENTRY(8555, 8555_E),
CPU_TYPE_ENTRY(8560, 8560),
CPU_TYPE_ENTRY(8567, 8567),
CPU_TYPE_ENTRY(8567, 8567_E),
CPU_TYPE_ENTRY(8568, 8568),
CPU_TYPE_ENTRY(8568, 8568_E),
CPU_TYPE_ENTRY(8572, 8572),
CPU_TYPE_ENTRY(8572, 8572_E),
};
struct cpu_type *identify_cpu(u32 ver)
{
int i;
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
if (cpu_type_list[i].soc_ver == ver)
return &cpu_type_list[i];
return NULL;
}
int checkcpu (void)
{
sys_info_t sysinfo;
uint pvr, svr;
uint fam;
uint ver;
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
#endif
int i;
svr = get_svr();
ver = SVR_SOC_VER(svr);
major = SVR_MAJ(svr);
#ifdef CONFIG_MPC8536
major &= 0x7; /* the msb of this nibble is a mfg code */
#endif
minor = SVR_MIN(svr);
#if (CONFIG_NUM_CPUS > 1)
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
printf("CPU%d: ", pic->whoami);
#else
puts("CPU: ");
#endif
cpu = identify_cpu(ver);
if (cpu) {
puts(cpu->name);
if (IS_E_PROCESSOR(svr))
puts("E");
} else {
puts("Unknown");
}
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
pvr = get_pvr();
fam = PVR_FAM(pvr);
ver = PVR_VER(pvr);
major = PVR_MAJ(pvr);
minor = PVR_MIN(pvr);
printf("Core: ");
switch (fam) {
case PVR_FAM(PVR_85xx):
puts("E500");
break;
default:
puts("Unknown");
break;
}
if (PVR_MEM(pvr) == 0x03)
puts("MC");
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
get_sys_info(&sysinfo);
puts("Clock Configuration:\n ");
for (i = 0; i < CONFIG_NUM_CPUS; i++)
printf("CPU%d:%-4s MHz, ",
i,strmhz(buf1, sysinfo.freqProcessor[i]));
printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
strmhz(buf1, sysinfo.freqDDRBus/2),
strmhz(buf2, sysinfo.freqDDRBus));
break;
case 0x7:
printf(" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
strmhz(buf1, sysinfo.freqDDRBus/2),
strmhz(buf2, sysinfo.freqDDRBus));
break;
default:
printf(" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
strmhz(buf1, sysinfo.freqDDRBus/2),
strmhz(buf2, sysinfo.freqDDRBus));
break;
}
if (sysinfo.freqLocalBus > LCRR_CLKDIV)
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
else
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
sysinfo.freqLocalBus);
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
return 0;
}
/* ------------------------------------------------------------------------- */
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
{
uint pvr;
uint ver;
unsigned long val, msr;
pvr = get_pvr();
ver = PVR_VER(pvr);
if (ver & 1){
/* e500 v2 core has reset control register */
volatile unsigned int * rstcr;
rstcr = (volatile unsigned int *)(CONFIG_SYS_IMMR + 0xE00B0);
*rstcr = 0x2; /* HRESET_REQ */
udelay(100);
}
/*
* Fallthrough if the code above failed
* Initiate hard reset in debug control register DBCR0
* Make sure MSR[DE] = 1
*/
msr = mfmsr ();
msr |= MSR_DE;
mtmsr (msr);
val = mfspr(DBCR0);
val |= 0x70000000;
mtspr(DBCR0,val);
return 1;
}
/*
* Get timebase clock frequency
*/
unsigned long get_tbclk (void)
{
return (gd->bus_clk + 4UL)/8UL;
}
#if defined(CONFIG_WATCHDOG)
void
watchdog_reset(void)
{
int re_enable = disable_interrupts();
reset_85xx_watchdog();
if (re_enable) enable_interrupts();
}
void
reset_85xx_watchdog(void)
{
/*
* Clear TSR(WIS) bit by writing 1
*/
unsigned long val;
val = mfspr(SPRN_TSR);
val |= TSR_WIS;
mtspr(SPRN_TSR, val);
}
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_DDR_ECC)
void dma_init(void) {
volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
dma->satr0 = 0x02c40000;
dma->datr0 = 0x02c40000;
dma->sr0 = 0xfffffff; /* clear any errors */
asm("sync; isync; msync");
return;
}
uint dma_check(void) {
volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
volatile uint status = dma->sr0;
/* While the channel is busy, spin */
while((status & 4) == 4) {
status = dma->sr0;
}
/* clear MR0[CS] channel start bit */
dma->mr0 &= 0x00000001;
asm("sync;isync;msync");
if (status != 0) {
printf ("DMA Error: status = %x\n", status);
}
return status;
}
int dma_xfer(void *dest, uint count, void *src) {
volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
dma->dar0 = (uint) dest;
dma->sar0 = (uint) src;
dma->bcr0 = count;
dma->mr0 = 0xf000004;
asm("sync;isync;msync");
dma->mr0 = 0xf000005;
asm("sync;isync;msync");
return dma_check();
}
#endif
/*
* Configures a UPM. The function requires the respective MxMR to be set
* before calling this function. "size" is the number or entries, not a sizeof.
*/
void upmconfig (uint upm, uint * table, uint size)
{
int i, mdr, mad, old_mad = 0;
volatile u32 *mxmr;
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
volatile u32 *brp,*orp;
volatile u8* dummy = NULL;
int upmmask;
switch (upm) {
case UPMA:
mxmr = &lbc->mamr;
upmmask = BR_MS_UPMA;
break;
case UPMB:
mxmr = &lbc->mbmr;
upmmask = BR_MS_UPMB;
break;
case UPMC:
mxmr = &lbc->mcmr;
upmmask = BR_MS_UPMC;
break;
default:
printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
hang();
}
/* Find the address for the dummy write transaction */
for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
i++, brp += 2, orp += 2) {
/* Look for a valid BR with selected UPM */
if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
dummy = (volatile u8*)(in_be32(brp) & BR_BA);
break;
}
}
if (i == 8) {
printf("Error: %s() could not find matching BR\n", __FUNCTION__);
hang();
}
for (i = 0; i < size; i++) {
/* 1 */
out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
/* 2 */
out_be32(&lbc->mdr, table[i]);
/* 3 */
mdr = in_be32(&lbc->mdr);
/* 4 */
*(volatile u8 *)dummy = 0;
/* 5 */
do {
mad = in_be32(mxmr) & MxMR_MAD_MSK;
} while (mad <= old_mad && !(!mad && i == (size-1)));
old_mad = mad;
}
out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
}
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
#if defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
#endif
#if defined(CONFIG_UEC_ETH1)
uec_initialize(0);
#endif
#if defined(CONFIG_UEC_ETH2)
uec_initialize(1);
#endif
#if defined(CONFIG_UEC_ETH3)
uec_initialize(2);
#endif
#if defined(CONFIG_UEC_ETH4)
uec_initialize(3);
#endif
#if defined(CONFIG_UEC_ETH5)
uec_initialize(4);
#endif
#if defined(CONFIG_UEC_ETH6)
uec_initialize(5);
#endif
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
tsec_standard_init(bis);
#endif
return 0;
}