| /* |
| * (C) Copyright 2006 |
| * DENX Software Engineering <mk@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| |
| #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) |
| |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/at91_pmc.h> |
| #include <asm/arch/clk.h> |
| |
| int usb_cpu_init(void) |
| { |
| at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; |
| |
| #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB |
| /* Enable PLLB */ |
| writel(get_pllb_init(), &pmc->pllbr); |
| while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) |
| ; |
| #ifdef CONFIG_AT91SAM9N12 |
| writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb); |
| #endif |
| #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) |
| /* Enable UPLL */ |
| writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, |
| &pmc->uckr); |
| while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) |
| ; |
| |
| /* Select PLLA as input clock of OHCI */ |
| writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); |
| #endif |
| |
| /* Enable USB host clock. */ |
| #ifdef CPU_HAS_PCR |
| at91_periph_clk_enable(ATMEL_ID_UHP); |
| #else |
| writel(1 << ATMEL_ID_UHP, &pmc->pcer); |
| #endif |
| |
| #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) |
| writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); |
| #else |
| writel(ATMEL_PMC_UHP, &pmc->scer); |
| #endif |
| |
| return 0; |
| } |
| |
| int usb_cpu_stop(void) |
| { |
| at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; |
| |
| /* Disable USB host clock. */ |
| #ifdef CPU_HAS_PCR |
| at91_periph_clk_disable(ATMEL_ID_UHP); |
| #else |
| writel(1 << ATMEL_ID_UHP, &pmc->pcdr); |
| #endif |
| |
| #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) |
| writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); |
| #else |
| writel(ATMEL_PMC_UHP, &pmc->scdr); |
| #endif |
| |
| #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB |
| #ifdef CONFIG_AT91SAM9N12 |
| writel(0, &pmc->usb); |
| #endif |
| /* Disable PLLB */ |
| writel(0, &pmc->pllbr); |
| while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) |
| ; |
| #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) |
| /* Disable UPLL */ |
| writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); |
| while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) |
| ; |
| #endif |
| |
| return 0; |
| } |
| |
| int usb_cpu_init_fail(void) |
| { |
| return usb_cpu_stop(); |
| } |
| |
| #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ |