Lei Wen | 26cc512 | 2011-10-05 08:11:40 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2011, Marvell Semiconductor Inc. |
| 3 | * Lei Wen <leiwen@marvell.com> |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | * |
| 23 | * Back ported to the 8xx platform (from the 8260 platform) by |
| 24 | * Murray.Jensen@cmst.csiro.au, 27-Jan-01. |
| 25 | */ |
| 26 | |
| 27 | #include <common.h> |
| 28 | #include <command.h> |
| 29 | #include <config.h> |
| 30 | #include <net.h> |
| 31 | #include <malloc.h> |
| 32 | #include <asm/io.h> |
| 33 | #include <linux/types.h> |
| 34 | #include <usb/mv_udc.h> |
| 35 | |
| 36 | #ifndef DEBUG |
| 37 | #define DBG(x...) do {} while (0) |
| 38 | #else |
| 39 | #define DBG(x...) printf(x) |
| 40 | static const char *reqname(unsigned r) |
| 41 | { |
| 42 | switch (r) { |
| 43 | case USB_REQ_GET_STATUS: return "GET_STATUS"; |
| 44 | case USB_REQ_CLEAR_FEATURE: return "CLEAR_FEATURE"; |
| 45 | case USB_REQ_SET_FEATURE: return "SET_FEATURE"; |
| 46 | case USB_REQ_SET_ADDRESS: return "SET_ADDRESS"; |
| 47 | case USB_REQ_GET_DESCRIPTOR: return "GET_DESCRIPTOR"; |
| 48 | case USB_REQ_SET_DESCRIPTOR: return "SET_DESCRIPTOR"; |
| 49 | case USB_REQ_GET_CONFIGURATION: return "GET_CONFIGURATION"; |
| 50 | case USB_REQ_SET_CONFIGURATION: return "SET_CONFIGURATION"; |
| 51 | case USB_REQ_GET_INTERFACE: return "GET_INTERFACE"; |
| 52 | case USB_REQ_SET_INTERFACE: return "SET_INTERFACE"; |
| 53 | default: return "*UNKNOWN*"; |
| 54 | } |
| 55 | } |
| 56 | #endif |
| 57 | |
| 58 | #define PAGE_SIZE 4096 |
| 59 | #define QH_MAXNUM 32 |
| 60 | static struct usb_endpoint_descriptor ep0_out_desc = { |
| 61 | .bLength = sizeof(struct usb_endpoint_descriptor), |
| 62 | .bDescriptorType = USB_DT_ENDPOINT, |
| 63 | .bEndpointAddress = 0, |
| 64 | .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| 65 | }; |
| 66 | |
| 67 | static struct usb_endpoint_descriptor ep0_in_desc = { |
| 68 | .bLength = sizeof(struct usb_endpoint_descriptor), |
| 69 | .bDescriptorType = USB_DT_ENDPOINT, |
| 70 | .bEndpointAddress = USB_DIR_IN, |
| 71 | .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| 72 | }; |
| 73 | |
| 74 | struct ept_queue_head *epts; |
| 75 | struct ept_queue_item *items[2 * NUM_ENDPOINTS]; |
| 76 | static int mv_pullup(struct usb_gadget *gadget, int is_on); |
| 77 | static int mv_ep_enable(struct usb_ep *ep, |
| 78 | const struct usb_endpoint_descriptor *desc); |
| 79 | static int mv_ep_disable(struct usb_ep *ep); |
| 80 | static int mv_ep_queue(struct usb_ep *ep, |
| 81 | struct usb_request *req, gfp_t gfp_flags); |
| 82 | static struct usb_request * |
| 83 | mv_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags); |
| 84 | static void mv_ep_free_request(struct usb_ep *ep, struct usb_request *_req); |
| 85 | |
| 86 | static struct usb_gadget_ops mv_udc_ops = { |
| 87 | .pullup = mv_pullup, |
| 88 | }; |
| 89 | |
| 90 | static struct usb_ep_ops mv_ep_ops = { |
| 91 | .enable = mv_ep_enable, |
| 92 | .disable = mv_ep_disable, |
| 93 | .queue = mv_ep_queue, |
| 94 | .alloc_request = mv_ep_alloc_request, |
| 95 | .free_request = mv_ep_free_request, |
| 96 | }; |
| 97 | |
| 98 | static struct mv_ep ep[2 * NUM_ENDPOINTS]; |
| 99 | static struct mv_drv controller = { |
| 100 | .gadget = { |
| 101 | .ep0 = &ep[0].ep, |
| 102 | .name = "mv_udc", |
| 103 | }, |
| 104 | }; |
| 105 | |
| 106 | static struct usb_request * |
| 107 | mv_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags) |
| 108 | { |
| 109 | struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep); |
| 110 | return &mv_ep->req; |
| 111 | } |
| 112 | |
| 113 | static void mv_ep_free_request(struct usb_ep *ep, struct usb_request *_req) |
| 114 | { |
| 115 | return; |
| 116 | } |
| 117 | |
| 118 | static void ep_enable(int num, int in) |
| 119 | { |
| 120 | struct ept_queue_head *head; |
| 121 | struct mv_udc *udc = controller.udc; |
| 122 | unsigned n; |
| 123 | head = epts + 2*num + in; |
| 124 | |
| 125 | n = readl(&udc->epctrl[num]); |
| 126 | if (in) |
| 127 | n |= (CTRL_TXE | CTRL_TXR | CTRL_TXT_BULK); |
| 128 | else |
| 129 | n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK); |
| 130 | |
| 131 | if (num != 0) |
| 132 | head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) | CONFIG_ZLT; |
| 133 | writel(n, &udc->epctrl[num]); |
| 134 | } |
| 135 | |
| 136 | static int mv_ep_enable(struct usb_ep *ep, |
| 137 | const struct usb_endpoint_descriptor *desc) |
| 138 | { |
| 139 | struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep); |
| 140 | int num, in; |
| 141 | num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 142 | in = (desc->bEndpointAddress & USB_DIR_IN) != 0; |
| 143 | ep_enable(num, in); |
| 144 | mv_ep->desc = desc; |
| 145 | return 0; |
| 146 | } |
| 147 | |
| 148 | static int mv_ep_disable(struct usb_ep *ep) |
| 149 | { |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | static int mv_ep_queue(struct usb_ep *ep, |
| 154 | struct usb_request *req, gfp_t gfp_flags) |
| 155 | { |
| 156 | struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep); |
| 157 | struct mv_udc *udc = controller.udc; |
| 158 | struct ept_queue_item *item; |
| 159 | struct ept_queue_head *head; |
| 160 | unsigned phys; |
| 161 | int bit, num, len, in; |
| 162 | num = mv_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 163 | in = (mv_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; |
| 164 | item = items[2 * num + in]; |
| 165 | head = epts + 2 * num + in; |
| 166 | phys = (unsigned)req->buf; |
| 167 | len = req->length; |
| 168 | |
| 169 | item->next = TERMINATE; |
| 170 | item->info = INFO_BYTES(len) | INFO_IOC | INFO_ACTIVE; |
| 171 | item->page0 = phys; |
| 172 | item->page1 = (phys & 0xfffff000) + 0x1000; |
| 173 | |
| 174 | head->next = (unsigned) item; |
| 175 | head->info = 0; |
| 176 | |
| 177 | DBG("ept%d %s queue len %x, buffer %x\n", |
| 178 | num, in ? "in" : "out", len, phys); |
| 179 | |
| 180 | if (in) |
| 181 | bit = EPT_TX(num); |
| 182 | else |
| 183 | bit = EPT_RX(num); |
| 184 | |
| 185 | flush_cache(phys, len); |
| 186 | flush_cache((unsigned long)item, sizeof(struct ept_queue_item)); |
| 187 | writel(bit, &udc->epprime); |
| 188 | |
| 189 | return 0; |
| 190 | } |
| 191 | |
| 192 | static void handle_ep_complete(struct mv_ep *ep) |
| 193 | { |
| 194 | struct ept_queue_item *item; |
| 195 | int num, in, len; |
| 196 | num = ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| 197 | in = (ep->desc->bEndpointAddress & USB_DIR_IN) != 0; |
| 198 | if (num == 0) |
| 199 | ep->desc = &ep0_out_desc; |
| 200 | item = items[2 * num + in]; |
| 201 | |
| 202 | if (item->info & 0xff) |
| 203 | printf("EP%d/%s FAIL nfo=%x pg0=%x\n", |
| 204 | num, in ? "in" : "out", item->info, item->page0); |
| 205 | |
| 206 | len = (item->info >> 16) & 0x7fff; |
| 207 | ep->req.length -= len; |
| 208 | DBG("ept%d %s complete %x\n", |
| 209 | num, in ? "in" : "out", len); |
| 210 | ep->req.complete(&ep->ep, &ep->req); |
| 211 | if (num == 0) { |
| 212 | ep->req.length = 0; |
| 213 | usb_ep_queue(&ep->ep, &ep->req, 0); |
| 214 | ep->desc = &ep0_in_desc; |
| 215 | } |
| 216 | } |
| 217 | |
| 218 | #define SETUP(type, request) (((type) << 8) | (request)) |
| 219 | |
| 220 | static void handle_setup(void) |
| 221 | { |
| 222 | struct usb_request *req = &ep[0].req; |
| 223 | struct mv_udc *udc = controller.udc; |
| 224 | struct ept_queue_head *head; |
| 225 | struct usb_ctrlrequest r; |
| 226 | int status = 0; |
| 227 | int num, in, _num, _in, i; |
| 228 | char *buf; |
| 229 | head = epts; |
| 230 | |
| 231 | flush_cache((unsigned long)head, sizeof(struct ept_queue_head)); |
| 232 | memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest)); |
| 233 | writel(EPT_RX(0), &udc->epstat); |
| 234 | DBG("handle setup %s, %x, %x index %x value %x\n", reqname(r.bRequest), |
| 235 | r.bRequestType, r.bRequest, r.wIndex, r.wValue); |
| 236 | |
| 237 | switch (SETUP(r.bRequestType, r.bRequest)) { |
| 238 | case SETUP(USB_RECIP_ENDPOINT, USB_REQ_CLEAR_FEATURE): |
| 239 | _num = r.wIndex & 15; |
| 240 | _in = !!(r.wIndex & 0x80); |
| 241 | |
| 242 | if ((r.wValue == 0) && (r.wLength == 0)) { |
| 243 | req->length = 0; |
| 244 | for (i = 0; i < NUM_ENDPOINTS; i++) { |
| 245 | if (!ep[i].desc) |
| 246 | continue; |
| 247 | num = ep[i].desc->bEndpointAddress |
| 248 | & USB_ENDPOINT_NUMBER_MASK; |
| 249 | in = (ep[i].desc->bEndpointAddress |
| 250 | & USB_DIR_IN) != 0; |
| 251 | if ((num == _num) && (in == _in)) { |
| 252 | ep_enable(num, in); |
| 253 | usb_ep_queue(controller.gadget.ep0, |
| 254 | req, 0); |
| 255 | break; |
| 256 | } |
| 257 | } |
| 258 | } |
| 259 | return; |
| 260 | |
| 261 | case SETUP(USB_RECIP_DEVICE, USB_REQ_SET_ADDRESS): |
| 262 | /* |
| 263 | * write address delayed (will take effect |
| 264 | * after the next IN txn) |
| 265 | */ |
| 266 | writel((r.wValue << 25) | (1 << 24), &udc->devaddr); |
| 267 | req->length = 0; |
| 268 | usb_ep_queue(controller.gadget.ep0, req, 0); |
| 269 | return; |
| 270 | |
| 271 | case SETUP(USB_DIR_IN | USB_RECIP_DEVICE, USB_REQ_GET_STATUS): |
| 272 | req->length = 2; |
| 273 | buf = (char *)req->buf; |
| 274 | buf[0] = 1 << USB_DEVICE_SELF_POWERED; |
| 275 | buf[1] = 0; |
| 276 | usb_ep_queue(controller.gadget.ep0, req, 0); |
| 277 | return; |
| 278 | } |
| 279 | /* pass request up to the gadget driver */ |
| 280 | if (controller.driver) |
| 281 | status = controller.driver->setup(&controller.gadget, &r); |
| 282 | else |
| 283 | status = -ENODEV; |
| 284 | |
| 285 | if (!status) |
| 286 | return; |
| 287 | DBG("STALL reqname %s type %x value %x, index %x\n", |
| 288 | reqname(r.bRequest), r.bRequestType, r.wValue, r.wIndex); |
| 289 | writel((1<<16) | (1 << 0), &udc->epctrl[0]); |
| 290 | } |
| 291 | |
| 292 | static void stop_activity(void) |
| 293 | { |
| 294 | int i, num, in; |
| 295 | struct ept_queue_head *head; |
| 296 | struct mv_udc *udc = controller.udc; |
| 297 | writel(readl(&udc->epcomp), &udc->epcomp); |
| 298 | writel(readl(&udc->epstat), &udc->epstat); |
| 299 | writel(0xffffffff, &udc->epflush); |
| 300 | |
| 301 | /* error out any pending reqs */ |
| 302 | for (i = 0; i < NUM_ENDPOINTS; i++) { |
| 303 | if (i != 0) |
| 304 | writel(0, &udc->epctrl[i]); |
| 305 | if (ep[i].desc) { |
| 306 | num = ep[i].desc->bEndpointAddress |
| 307 | & USB_ENDPOINT_NUMBER_MASK; |
| 308 | in = (ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; |
| 309 | head = epts + (num * 2) + (in); |
| 310 | head->info = INFO_ACTIVE; |
| 311 | } |
| 312 | } |
| 313 | } |
| 314 | |
| 315 | void udc_irq(void) |
| 316 | { |
| 317 | struct mv_udc *udc = controller.udc; |
| 318 | unsigned n = readl(&udc->usbsts); |
| 319 | writel(n, &udc->usbsts); |
| 320 | int bit, i, num, in; |
| 321 | |
| 322 | n &= (STS_SLI | STS_URI | STS_PCI | STS_UI | STS_UEI); |
| 323 | if (n == 0) |
| 324 | return; |
| 325 | |
| 326 | if (n & STS_URI) { |
| 327 | DBG("-- reset --\n"); |
| 328 | stop_activity(); |
| 329 | } |
| 330 | if (n & STS_SLI) |
| 331 | DBG("-- suspend --\n"); |
| 332 | |
| 333 | if (n & STS_PCI) { |
| 334 | DBG("-- portchange --\n"); |
| 335 | bit = (readl(&udc->portsc) >> 26) & 3; |
| 336 | if (bit == 2) { |
| 337 | controller.gadget.speed = USB_SPEED_HIGH; |
| 338 | for (i = 1; i < NUM_ENDPOINTS && n; i++) |
| 339 | if (ep[i].desc) |
| 340 | ep[i].ep.maxpacket = 512; |
| 341 | } else { |
| 342 | controller.gadget.speed = USB_SPEED_FULL; |
| 343 | } |
| 344 | } |
| 345 | |
| 346 | if (n & STS_UEI) |
| 347 | printf("<UEI %x>\n", readl(&udc->epcomp)); |
| 348 | |
| 349 | if ((n & STS_UI) || (n & STS_UEI)) { |
| 350 | n = readl(&udc->epstat); |
| 351 | if (n & EPT_RX(0)) |
| 352 | handle_setup(); |
| 353 | |
| 354 | n = readl(&udc->epcomp); |
| 355 | if (n != 0) |
| 356 | writel(n, &udc->epcomp); |
| 357 | |
| 358 | for (i = 0; i < NUM_ENDPOINTS && n; i++) { |
| 359 | if (ep[i].desc) { |
| 360 | num = ep[i].desc->bEndpointAddress |
| 361 | & USB_ENDPOINT_NUMBER_MASK; |
| 362 | in = (ep[i].desc->bEndpointAddress |
| 363 | & USB_DIR_IN) != 0; |
| 364 | bit = (in) ? EPT_TX(num) : EPT_RX(num); |
| 365 | if (n & bit) |
| 366 | handle_ep_complete(&ep[i]); |
| 367 | } |
| 368 | } |
| 369 | } |
| 370 | } |
| 371 | |
| 372 | int usb_gadget_handle_interrupts(void) |
| 373 | { |
| 374 | u32 value; |
| 375 | struct mv_udc *udc = controller.udc; |
| 376 | |
| 377 | value = readl(&udc->usbsts); |
| 378 | if (value) |
| 379 | udc_irq(); |
| 380 | |
| 381 | return value; |
| 382 | } |
| 383 | |
| 384 | static int mv_pullup(struct usb_gadget *gadget, int is_on) |
| 385 | { |
| 386 | struct mv_udc *udc = controller.udc; |
| 387 | if (is_on) { |
| 388 | /* RESET */ |
| 389 | writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd); |
| 390 | udelay(200); |
| 391 | |
| 392 | writel((unsigned) epts, &udc->epinitaddr); |
| 393 | |
| 394 | /* select DEVICE mode */ |
| 395 | writel(USBMODE_DEVICE, &udc->usbmode); |
| 396 | |
| 397 | writel(0xffffffff, &udc->epflush); |
| 398 | |
| 399 | /* Turn on the USB connection by enabling the pullup resistor */ |
| 400 | writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RUN, &udc->usbcmd); |
| 401 | } else { |
| 402 | stop_activity(); |
| 403 | writel(USBCMD_FS2, &udc->usbcmd); |
| 404 | udelay(800); |
| 405 | if (controller.driver) |
| 406 | controller.driver->disconnect(gadget); |
| 407 | } |
| 408 | |
| 409 | return 0; |
| 410 | } |
| 411 | |
| 412 | void udc_disconnect(void) |
| 413 | { |
| 414 | struct mv_udc *udc = controller.udc; |
| 415 | /* disable pullup */ |
| 416 | stop_activity(); |
| 417 | writel(USBCMD_FS2, &udc->usbcmd); |
| 418 | udelay(800); |
| 419 | if (controller.driver) |
| 420 | controller.driver->disconnect(&controller.gadget); |
| 421 | } |
| 422 | |
| 423 | static int mvudc_probe(void) |
| 424 | { |
| 425 | struct ept_queue_head *head; |
| 426 | int i; |
| 427 | |
| 428 | controller.gadget.ops = &mv_udc_ops; |
| 429 | controller.udc = (struct mv_udc *)CONFIG_USB_REG_BASE; |
| 430 | epts = memalign(PAGE_SIZE, QH_MAXNUM * sizeof(struct ept_queue_head)); |
| 431 | memset(epts, 0, QH_MAXNUM * sizeof(struct ept_queue_head)); |
| 432 | for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { |
| 433 | /* |
| 434 | * For item0 and item1, they are served as ep0 |
| 435 | * out&in seperately |
| 436 | */ |
| 437 | head = epts + i; |
| 438 | if (i < 2) |
| 439 | head->config = CONFIG_MAX_PKT(EP0_MAX_PACKET_SIZE) |
| 440 | | CONFIG_ZLT | CONFIG_IOS; |
| 441 | else |
| 442 | head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) |
| 443 | | CONFIG_ZLT; |
| 444 | head->next = TERMINATE; |
| 445 | head->info = 0; |
| 446 | |
| 447 | items[i] = memalign(PAGE_SIZE, sizeof(struct ept_queue_item)); |
| 448 | } |
| 449 | |
| 450 | INIT_LIST_HEAD(&controller.gadget.ep_list); |
| 451 | ep[0].ep.maxpacket = 64; |
| 452 | ep[0].ep.name = "ep0"; |
| 453 | ep[0].desc = &ep0_in_desc; |
| 454 | INIT_LIST_HEAD(&controller.gadget.ep0->ep_list); |
| 455 | for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { |
| 456 | if (i != 0) { |
| 457 | ep[i].ep.maxpacket = 512; |
| 458 | ep[i].ep.name = "ep-"; |
| 459 | list_add_tail(&ep[i].ep.ep_list, |
| 460 | &controller.gadget.ep_list); |
| 461 | ep[i].desc = NULL; |
| 462 | } |
| 463 | ep[i].ep.ops = &mv_ep_ops; |
| 464 | } |
| 465 | return 0; |
| 466 | } |
| 467 | |
| 468 | int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| 469 | { |
| 470 | struct mv_udc *udc = controller.udc; |
| 471 | int retval; |
| 472 | |
| 473 | if (!driver |
| 474 | || driver->speed < USB_SPEED_FULL |
| 475 | || !driver->bind |
| 476 | || !driver->setup) { |
| 477 | DBG("bad parameter.\n"); |
| 478 | return -EINVAL; |
| 479 | } |
| 480 | |
| 481 | if (!mvudc_probe()) { |
| 482 | usb_lowlevel_init(); |
| 483 | /* select ULPI phy */ |
| 484 | writel(PTS(PTS_ENABLE) | PFSC, &udc->portsc); |
| 485 | } |
| 486 | retval = driver->bind(&controller.gadget); |
| 487 | if (retval) { |
| 488 | DBG("driver->bind() returned %d\n", retval); |
| 489 | return retval; |
| 490 | } |
| 491 | controller.driver = driver; |
| 492 | |
| 493 | return 0; |
| 494 | } |
| 495 | |
| 496 | int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| 497 | { |
| 498 | return 0; |
| 499 | } |