blob: 7c11e38d1c184ae62085c990a0541027b7843647 [file] [log] [blame]
Kyle Moffettf8bbb4d2011-12-07 16:39:16 -05001/*
2 * Copyright 2009-2011 eXMeritus, A Boeing Company
3 * Copyright 2007-2009 Freescale Semiconductor, Inc.
4 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02005 * SPDX-License-Identifier: GPL-2.0+
Kyle Moffettf8bbb4d2011-12-07 16:39:16 -05006 */
7
8#include <common.h>
9#include <command.h>
10#include <pci.h>
11#include <asm/processor.h>
12#include <asm/mmu.h>
13#include <asm/cache.h>
14#include <asm/immap_85xx.h>
15#include <asm/fsl_pci.h>
16#include <asm/fsl_ddr_sdram.h>
17#include <asm/io.h>
18#include <miiphy.h>
19#include <libfdt.h>
20#include <linux/ctype.h>
21#include <fdt_support.h>
22#include <fsl_mdio.h>
23#include <tsec.h>
24#include <asm/fsl_law.h>
25#include <netdev.h>
26#include <malloc.h>
27#include <i2c.h>
28#include <pca953x.h>
29
30#include "gpios.h"
31
32DECLARE_GLOBAL_DATA_PTR;
33
34int checkboard(void)
35{
36 unsigned int gpio_high = 0;
37 unsigned int gpio_low = 0;
38 unsigned int gpio_in = 0;
39 unsigned int i;
40
41 puts("Board: HWW-1U-1A ");
42
43 /*
44 * First just figure out which CPU we're on, then use that to
45 * configure the lists of other GPIOs to be programmed.
46 */
47 mpc85xx_gpio_set_in(GPIO_CPU_ID);
48 if (hww1u1a_is_cpu_a()) {
49 puts("CPU A\n");
50
51 /* We want to turn on some LEDs */
52 gpio_high |= GPIO_CPUA_CPU_READY;
53 gpio_low |= GPIO_CPUA_DEBUG_LED1;
54 gpio_low |= GPIO_CPUA_DEBUG_LED2;
55
56 /* Disable the unused transmitters */
57 gpio_low |= GPIO_CPUA_TDIS1A;
58 gpio_high |= GPIO_CPUA_TDIS1B;
59 gpio_low |= GPIO_CPUA_TDIS2A;
60 gpio_high |= GPIO_CPUA_TDIS2B;
61 } else {
62 puts("CPU B\n");
63
64 /* We want to turn on some LEDs */
65 gpio_high |= GPIO_CPUB_CPU_READY;
66 gpio_low |= GPIO_CPUB_DEBUG_LED1;
67 gpio_low |= GPIO_CPUB_DEBUG_LED2;
68
69 /* Enable the appropriate receivers */
70 gpio_high |= GPIO_CPUB_RMUX_SEL0A;
71 gpio_high |= GPIO_CPUB_RMUX_SEL0B;
72 gpio_low |= GPIO_CPUB_RMUX_SEL1A;
73 gpio_low |= GPIO_CPUB_RMUX_SEL1B;
74 }
75
76 /* These GPIOs are common */
77 gpio_in |= IRQ_I2CINT | IRQ_FANINT | IRQ_DIMM_EVENT;
78 gpio_low |= GPIO_RS422_RE;
79 gpio_high |= GPIO_RS422_DE;
80
81 /* Ok, now go ahead and program all of those in one go */
82 mpc85xx_gpio_set(gpio_high|gpio_low|gpio_in,
83 gpio_high|gpio_low,
84 gpio_high);
85
86 /*
87 * If things have been taken out of reset early (for example, by one
88 * of the BDI3000 debuggers), then we need to put them back in reset
89 * and delay a while before we continue.
90 */
91 if (mpc85xx_gpio_get(GPIO_RESETS)) {
Andy Fleminge76cd5d2012-10-23 19:03:46 -050092 ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
Kyle Moffettf8bbb4d2011-12-07 16:39:16 -050093
94 puts("Debugger detected... extra device reset enabled!\n");
95
96 /* Put stuff into reset and disable the DDR controller */
97 mpc85xx_gpio_set_low(GPIO_RESETS);
98 out_be32(&ddr->sdram_cfg, 0x00000000);
99
100 puts(" Waiting 1 sec for reset...");
101 for (i = 0; i < 10; i++) {
102 udelay(100000);
103 puts(".");
104 }
105 puts("\n");
106 }
107
108 /* Now bring everything back out of reset again */
109 mpc85xx_gpio_set_high(GPIO_RESETS);
110 return 0;
111}
112
113/*
114 * This little shell function just returns whether or not it's CPU A.
115 * It can be used to select the right device-tree when booting, etc.
116 */
117int do_hww1u1a_test_cpu_a(cmd_tbl_t *cmdtp, int flag,
118 int argc, char * const argv[])
119{
120 if (argc > 1)
121 cmd_usage(cmdtp);
122
123 if (hww1u1a_is_cpu_a())
124 return 0;
125 else
126 return 1;
127}
128U_BOOT_CMD(
129 test_cpu_a, 1, 0, do_hww1u1a_test_cpu_a,
130 "Test if this is CPU A (versus B) on the eXMeritus HWW-1U-1A board",
131 ""
132);
133
134/* Create a prompt-like string: "uboot@HOSTNAME% " */
135#define PROMPT_PREFIX "uboot@exm"
136#define PROMPT_SUFFIX "% "
137
138/* This function returns a PS1 prompt based on the serial number */
139static char *hww1u1a_prompt;
140const char *hww1u1a_get_ps1(void)
141{
142 unsigned long len, i, j;
143 const char *serialnr;
144
145 /* If our prompt was already set, just use that */
146 if (hww1u1a_prompt)
147 return hww1u1a_prompt;
148
149 /* Use our serial number if present, otherwise a default */
150 serialnr = getenv("serial#");
151 if (!serialnr || !serialnr[0])
152 serialnr = "999999-X";
153
154 /*
155 * We will turn the serial number into a hostname by:
156 * (A) Delete all non-alphanumerics.
157 * (B) Lowercase all letters.
158 * (C) Prefix "exm".
159 * (D) Suffix "a" for CPU A and "b" for CPU B.
160 */
161 for (i = 0, len = 0; serialnr[i]; i++) {
162 if (isalnum(serialnr[i]))
163 len++;
164 }
165
166 len += sizeof(PROMPT_PREFIX PROMPT_SUFFIX) + 1; /* Includes NUL */
167 hww1u1a_prompt = malloc(len);
168 if (!hww1u1a_prompt)
169 return PROMPT_PREFIX "UNKNOWN(ENOMEM)" PROMPT_SUFFIX;
170
171 /* Now actually fill it in */
172 i = 0;
173
174 /* Handle the prefix */
175 for (j = 0; j < sizeof(PROMPT_PREFIX) - 1; j++)
176 hww1u1a_prompt[i++] = PROMPT_PREFIX[j];
177
178 /* Now the serial# part of the hostname */
179 for (j = 0; serialnr[j]; j++)
180 if (isalnum(serialnr[j]))
181 hww1u1a_prompt[i++] = tolower(serialnr[j]);
182
183 /* Now the CPU id ("a" or "b") */
184 hww1u1a_prompt[i++] = hww1u1a_is_cpu_a() ? 'a' : 'b';
185
186 /* Finally the suffix */
187 for (j = 0; j < sizeof(PROMPT_SUFFIX); j++)
188 hww1u1a_prompt[i++] = PROMPT_SUFFIX[j];
189
190 /* This should all have added up, but just in case */
191 hww1u1a_prompt[len - 1] = '\0';
192
193 /* Now we're done */
194 return hww1u1a_prompt;
195}
196
197void pci_init_board(void)
198{
199 fsl_pcie_init_board(0);
200}
201
202int board_early_init_r(void)
203{
204 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
205 const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
206
207 /*
208 * Remap bootflash region to caching-inhibited
209 * so that flash can be erased properly.
210 */
211
212 /* Flush d-cache and invalidate i-cache of any FLASH data */
213 flush_dcache();
214 invalidate_icache();
215
216 /* invalidate existing TLB entry for FLASH */
217 disable_tlb(flash_esel);
218
219 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
220 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
221 0, flash_esel, BOOKE_PAGESZ_256M, 1);
222
223 return 0;
224}
225
226int board_eth_init(bd_t *bis)
227{
228 struct tsec_info_struct tsec_info[4];
229 struct fsl_pq_mdio_info mdio_info;
230
231 SET_STD_TSEC_INFO(tsec_info[0], 1);
232 SET_STD_TSEC_INFO(tsec_info[1], 2);
233 SET_STD_TSEC_INFO(tsec_info[2], 3);
234
235 if (hww1u1a_is_cpu_a())
236 tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUA;
237 else
238 tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUB;
239
240 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
241 mdio_info.name = DEFAULT_MII_NAME;
242 fsl_pq_mdio_init(bis, &mdio_info);
243
244 tsec_eth_init(bis, tsec_info, 3);
245 return pci_eth_init(bis);
246}
247
248void ft_board_setup(void *blob, bd_t *bd)
249{
250 phys_addr_t base;
251 phys_size_t size;
252
253 ft_cpu_setup(blob, bd);
254
255 base = getenv_bootm_low();
256 size = getenv_bootm_size();
257
258 fdt_fixup_memory(blob, (u64)base, (u64)size);
259
260 FT_FSL_PCI_SETUP;
261}