Alex Dubov | a14a944 | 2011-01-23 21:59:10 -0800 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2011 Alex Dubov <oakad@yahoo.com> |
| 3 | * |
| 4 | * See file CREDITS for list of people who contributed to this |
| 5 | * project. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or |
| 8 | * modify it under the terms of the GNU General Public License as |
| 9 | * published by the Free Software Foundation; either version 2 of |
| 10 | * the License, or (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 20 | * MA 02111-1307 USA |
| 21 | */ |
| 22 | |
| 23 | #include <common.h> |
| 24 | #include <asm/processor.h> |
| 25 | #include <asm/mmu.h> |
| 26 | #include <asm/immap_85xx.h> |
| 27 | #include <asm/fsl_law.h> |
| 28 | #include <asm/io.h> |
| 29 | #include <miiphy.h> |
| 30 | #include <libfdt.h> |
| 31 | #include <fdt_support.h> |
| 32 | |
| 33 | /* |
| 34 | * Initialize Local Bus |
| 35 | */ |
| 36 | void local_bus_init(void) |
| 37 | { |
| 38 | fsl_lbc_t *lbc = LBC_BASE_ADDR; |
| 39 | |
| 40 | out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error interrupts */ |
| 41 | out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error interrupts */ |
| 42 | } |
| 43 | |
| 44 | int checkboard(void) |
| 45 | { |
| 46 | ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| 47 | ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); |
| 48 | |
| 49 | puts("Board: Mercury Computer Systems, Inc. MPQ-101 "); |
| 50 | #ifdef CONFIG_PHYS_64BIT |
| 51 | puts("(36-bit addrmap) "); |
| 52 | #endif |
| 53 | putc('\n'); |
| 54 | |
| 55 | /* |
| 56 | * Initialize local bus. |
| 57 | */ |
| 58 | local_bus_init(); |
| 59 | |
| 60 | /* |
| 61 | * Hack TSEC 3 and 4 IO voltages. |
| 62 | */ |
| 63 | out_be32(&gur->tsec34ioovcr, 0xe7e0); /* 1110 0111 1110 0xxx */ |
| 64 | |
| 65 | out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */ |
| 66 | out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */ |
| 67 | return 0; |
| 68 | } |
| 69 | |
| 70 | phys_size_t fixed_sdram(void) |
| 71 | { |
| 72 | ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); |
| 73 | const char *p_mode = getenv("perf_mode"); |
| 74 | |
| 75 | puts("Initializing...."); |
| 76 | |
| 77 | out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); |
| 78 | out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); |
| 79 | |
| 80 | out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); |
| 81 | out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); |
| 82 | |
| 83 | if (p_mode && !strcmp("performance", p_mode)) { |
| 84 | out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_PERF); |
| 85 | out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_PERF); |
| 86 | out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_PERF); |
| 87 | out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_PERF); |
| 88 | out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_PERF); |
| 89 | } else { |
| 90 | out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); |
| 91 | out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); |
| 92 | out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1); |
| 93 | out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2); |
| 94 | out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL); |
| 95 | } |
| 96 | |
| 97 | out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL); |
| 98 | out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2); |
| 99 | |
| 100 | asm("sync;isync"); |
| 101 | udelay(500); |
| 102 | |
| 103 | out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); |
| 104 | asm("sync; isync"); |
| 105 | udelay(500); |
| 106 | |
| 107 | return ((phys_size_t)1) << CONFIG_SYS_SDRAM_SIZE_LOG; |
| 108 | } |
| 109 | |
| 110 | void pci_init_board(void) |
| 111 | { |
| 112 | ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| 113 | |
| 114 | /* PCI is disabled */ |
| 115 | out_be32(&gur->devdisr, in_be32(&gur->devdisr) |
| 116 | | MPC85xx_DEVDISR_PCI1 |
| 117 | | MPC85xx_DEVDISR_PCI2 |
| 118 | | MPC85xx_DEVDISR_PCIE); |
| 119 | } |
| 120 | |
| 121 | |
| 122 | #if defined(CONFIG_OF_BOARD_SETUP) |
| 123 | |
| 124 | void ft_board_setup(void *blob, bd_t *bd) |
| 125 | { |
| 126 | ft_cpu_setup(blob, bd); |
| 127 | } |
| 128 | |
| 129 | #endif |