Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / edd6cf20e1be63f84e0f5af0280473cf31f0e86c / . / include / configs / pcs440ep.h
blob: 50c1c4fd4cb0a6d91db463bf7cf459652718387f [file] [log] [blame]
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]1/*
2 * (C) Copyright 2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/************************************************************************
25 * pcs440ep.h - configuration for PCS440EP board
26 ***********************************************************************/
27#ifndef __CONFIG_H
28#define __CONFIG_H
29
30/*-----------------------------------------------------------------------
31 * High Level Configuration Options
32 *----------------------------------------------------------------------*/
33#define CONFIG_PCS440EP 1 /* Board is PCS440EP */
34#define CONFIG_440EP 1 /* Specific PPC440EP support */
35#define CONFIG_4xx 1 /* ... PPC4xx family */
36#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
37
38#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
39#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
40
41/*-----------------------------------------------------------------------
42 * Base addresses -- Note these are effective addresses where the
43 * actual resources get mapped (not physical addresses)
44 *----------------------------------------------------------------------*/
Wolfgang Denke461a242006-06-07 11:36:02 +0200[diff] [blame]45#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]46#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
47#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
48#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
49#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
50#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
51#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
52#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
53#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
54
55/*Don't change either of these*/
56#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/
57#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/
58/*Don't change either of these*/
59
60#define CFG_USB_DEVICE 0x50000000
61#define CFG_BOOT_BASE_ADDR 0xf0000000
62
63/*-----------------------------------------------------------------------
64 * Initial RAM & stack pointer (placed in SDRAM)
65 *----------------------------------------------------------------------*/
66#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
67#define CFG_INIT_RAM_END (8 << 10)
68#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
69#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
70#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
71
72/*-----------------------------------------------------------------------
73 * Serial Port
74 *----------------------------------------------------------------------*/
75#undef CFG_EXT_SERIAL_CLOCK /* no external clk used */
76#define CONFIG_BAUDRATE 115200
77#define CONFIG_SERIAL_MULTI 1
78/*define this if you want console on UART1*/
79#undef CONFIG_UART1_CONSOLE
80
81#define CFG_BAUDRATE_TABLE \
82 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
83
84/*-----------------------------------------------------------------------
85 * Environment
86 *----------------------------------------------------------------------*/
87#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
88
89/*-----------------------------------------------------------------------
90 * FLASH related
91 *----------------------------------------------------------------------*/
92#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
93#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
94
95#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
96#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
97
98#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */
99#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
100#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
101
102#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
103
104#ifdef CFG_ENV_IS_IN_FLASH
105#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
106#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
107#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
108
109/* Address and size of Redundant Environment Sector */
110#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
111#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
112#endif /* CFG_ENV_IS_IN_FLASH */
113
114/*-----------------------------------------------------------------------
115 * DDR SDRAM
116 *----------------------------------------------------------------------*/
117#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
118#undef CONFIG_DDR_ECC /* don't use ECC */
Stefan Roeseed4633c2006-06-13 18:55:07 +0200[diff] [blame]119#define SPD_EEPROM_ADDRESS {0x50}
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]120
121/*-----------------------------------------------------------------------
122 * I2C
123 *----------------------------------------------------------------------*/
124#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
125#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Stefan Roeseed4633c2006-06-13 18:55:07 +0200[diff] [blame]126#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]127#define CFG_I2C_SLAVE 0x7F
128
Stefan Roeseed4633c2006-06-13 18:55:07 +0200[diff] [blame]129#define CFG_I2C_EEPROM_ADDR (0xa4>>1)
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]130#define CFG_I2C_EEPROM_ADDR_LEN 1
131#define CFG_EEPROM_PAGE_WRITE_ENABLE
132#define CFG_EEPROM_PAGE_WRITE_BITS 3
133#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
134
135#define CONFIG_PREBOOT "echo;" \
136 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
137 "echo"
138
139#undef CONFIG_BOOTARGS
140
141#define CONFIG_EXTRA_ENV_SETTINGS \
142 "netdev=eth0\0" \
143 "hostname=pcs440ep\0" \
144 "nfsargs=setenv bootargs root=/dev/nfs rw " \
145 "nfsroot=${serverip}:${rootpath}\0" \
146 "ramargs=setenv bootargs root=/dev/ram rw\0" \
147 "addip=setenv bootargs ${bootargs} " \
148 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
149 ":${hostname}:${netdev}:off panic=1\0" \
150 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
151 "flash_nfs=run nfsargs addip addtty;" \
152 "bootm ${kernel_addr}\0" \
153 "flash_self=run ramargs addip addtty;" \
154 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
155 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
156 "bootm\0" \
157 "rootpath=/opt/eldk/ppc_4xx\0" \
158 "bootfile=/tftpboot/pcs440ep/uImage\0" \
Wolfgang Denke461a242006-06-07 11:36:02 +0200[diff] [blame]159 "kernel_addr=FFF00000\0" \
160 "ramdisk_addr=FFF00000\0" \
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]161 "load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0" \
Wolfgang Denke461a242006-06-07 11:36:02 +0200[diff] [blame]162 "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
163 "cp.b 100000 FFFA0000 60000\0" \
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]164 "upd=run load;run update\0" \
165 ""
166#define CONFIG_BOOTCOMMAND "run flash_self"
167
168#if 0
169#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
170#else
171#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
172#endif
173
174#define CONFIG_BAUDRATE 115200
175
176#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
177#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
178
179#define CONFIG_MII 1 /* MII PHY management */
180#define CONFIG_NET_MULTI 1 /* required for netconsole */
181#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
182#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
183#define CONFIG_PHY1_ADDR 2
184
185#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
186
187#define CONFIG_NETCONSOLE /* include NetConsole support */
188
189/* Partitions */
190#define CONFIG_MAC_PARTITION
191#define CONFIG_DOS_PARTITION
192#define CONFIG_ISO_PARTITION
193
194#ifdef CONFIG_440EP
195/* USB */
196#define CONFIG_USB_OHCI
197#define CONFIG_USB_STORAGE
198
199/*Comment this out to enable USB 1.1 device*/
200#define USB_2_0_DEVICE
201#endif /*CONFIG_440EP*/
202
203#ifdef DEBUG
204#define CONFIG_PANIC_HANG
205#else
206#define CONFIG_HW_WATCHDOG /* watchdog */
207#endif
208
209#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
210 CFG_CMD_ASKENV | \
211 CFG_CMD_DHCP | \
212 CFG_CMD_DIAG | \
Stefan Roeseed4633c2006-06-13 18:55:07 +0200[diff] [blame]213 CFG_CMD_EEPROM | \
Stefan Roesea4c8d132006-06-02 16:18:04 +0200[diff] [blame]214 CFG_CMD_ELF | \
215 CFG_CMD_I2C | \
216 CFG_CMD_IRQ | \
217 CFG_CMD_MII | \
218 CFG_CMD_NET | \
219 CFG_CMD_NFS | \
220 CFG_CMD_PCI | \
221 CFG_CMD_PING | \
222 CFG_CMD_REGINFO | \
223 CFG_CMD_SDRAM | \
224 CFG_CMD_EXT2 | \
225 CFG_CMD_FAT | \
226 CFG_CMD_USB )
227
228
229#define CONFIG_SUPPORT_VFAT
230
231/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
232#include <cmd_confdefs.h>
233
234/*
235 * Miscellaneous configurable options
236 */
237#define CFG_LONGHELP /* undef to save memory */
238#define CFG_PROMPT "=> " /* Monitor Command Prompt */
239#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
240#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
241#else
242#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
243#endif
244#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
245#define CFG_MAXARGS 16 /* max number of command args */
246#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
247
248#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
249#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
250
251#define CFG_LOAD_ADDR 0x100000 /* default load address */
252#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
253#define CONFIG_LYNXKDI 1 /* support kdi files */
254
255#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
256
257/*-----------------------------------------------------------------------
258 * PCI stuff
259 *-----------------------------------------------------------------------
260 */
261/* General PCI */
262#define CONFIG_PCI /* include pci support */
263#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
264#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
265#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
266
267/* Board-specific PCI */
268#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
269#define CFG_PCI_TARGET_INIT
270#define CFG_PCI_MASTER_INIT
271
272#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
273#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
274
275/*
276 * For booting Linux, the board info and command line data
277 * have to be in the first 8 MB of memory, since this is
278 * the maximum mapped by the Linux kernel during initialization.
279 */
280#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
281
282/*-----------------------------------------------------------------------
283 * External Bus Controller (EBC) Setup
284 *----------------------------------------------------------------------*/
285#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */
286#define FLASH_BASE1_PRELIM 0xFFF80000 /* FLASH bank #1 */
287
288#define CFG_FLASH FLASH_BASE0_PRELIM
289#define CFG_SRAM 0xF1000000
290#define CFG_FPGA 0xF2000000
291#define CFG_CF1 0xF0000000
292#define CFG_CF2 0xF0100000
293
294/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
295#define CFG_EBC_PB0AP 0x02010000 /* TWT=4,OEN=1 */
296#define CFG_EBC_PB0CR (CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
297
298/* Memory Bank 1 (SRAM) initialization */
299#define CFG_EBC_PB1AP 0x01810040 /* TWT=3,OEN=1,BEM=1 */
300#define CFG_EBC_PB1CR (CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */
301
302/* Memory Bank 2 (FPGA) initialization */
303#define CFG_EBC_PB2AP 0x01010440 /* TWT=2,OEN=1,TH=2,BEM=1 */
304#define CFG_EBC_PB2CR (CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */
305
306/* Memory Bank 3 (CompactFlash) initialization */
307#define CFG_EBC_PB3AP 0x080BD400
308#define CFG_EBC_PB3CR (CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */
309
310/* Memory Bank 4 (CompactFlash) initialization */
311#define CFG_EBC_PB4AP 0x080BD400
312#define CFG_EBC_PB4CR (CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */
313
314/*-----------------------------------------------------------------------
315 * PPC440 GPIO Configuration
316 */
317#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \
318{ \
319/* GPIO Core 0 */ \
320{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
321{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
322{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
323{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
324{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
325{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
326{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \
327{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \
328{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \
329{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \
330{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \
331{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \
332{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \
333{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \
334{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \
335{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \
336{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \
337{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \
338{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \
339{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \
340{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \
341{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \
342{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \
343{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \
344{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \
345{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \
346{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \
347{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
348{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \
349{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
350{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
351{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
352}, \
353{ \
354/* GPIO Core 1 */ \
355{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \
356{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \
357{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
358{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
359{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \
360{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \
361{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
362{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \
363{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \
364{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \
365{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \
366{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \
367{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
368{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
369{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
370{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
371{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
372{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \
373{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \
374{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \
375{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \
376{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \
377{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \
378{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \
379{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \
380{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \
381{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \
382{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \
383{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \
384{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \
385{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \
386{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \
387} \
388}
389
390/*-----------------------------------------------------------------------
391 * Cache Configuration
392 */
393#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
394#define CFG_CACHELINE_SIZE 32 /* ... */
395#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
396#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
397#endif
398
399/*
400 * Internal Definitions
401 *
402 * Boot Flags
403 */
404#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
405#define BOOTFLAG_WARM 0x02 /* Software reboot */
406
407#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
408#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
409#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
410#endif
411
412#endif /* __CONFIG_H */