blob: de1a018c1fbd5abb3cfd199a46872101e7486650 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Heiko Schocher7254d922015-05-18 13:32:31 +02002/*
3 * (C) Copyright 2015
4 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 *
9 * Author: Fabio Estevam <fabio.estevam@freescale.com>
Heiko Schocher7254d922015-05-18 13:32:31 +020010 */
11
12#include <asm/arch/clock.h>
13#include <asm/arch/imx-regs.h>
14#include <asm/arch/iomux.h>
15#include <asm/arch/mx6-pins.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090016#include <linux/errno.h>
Heiko Schocher7254d922015-05-18 13:32:31 +020017#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020018#include <asm/mach-imx/iomux-v3.h>
19#include <asm/mach-imx/boot_mode.h>
20#include <asm/mach-imx/mxc_i2c.h>
21#include <asm/mach-imx/video.h>
Heiko Schocher7254d922015-05-18 13:32:31 +020022#include <mmc.h>
Yangbo Lue37ac712019-06-21 11:42:28 +080023#include <fsl_esdhc_imx.h>
Heiko Schocher7254d922015-05-18 13:32:31 +020024#include <miiphy.h>
25#include <netdev.h>
26#include <asm/arch/mxc_hdmi.h>
27#include <asm/arch/crm_regs.h>
28#include <linux/fb.h>
29#include <ipu_pixfmt.h>
30#include <asm/io.h>
31#include <asm/arch/sys_proto.h>
32#include <pwm.h>
33
34struct i2c_pads_info i2c_pad_info3 = {
35 .scl = {
36 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
37 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
38 .gp = IMX_GPIO_NR(3, 17)
39 },
40 .sda = {
41 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
42 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
43 .gp = IMX_GPIO_NR(3, 18)
44 }
45};
46
47iomux_v3_cfg_t const uart1_pads[] = {
48 MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
49 MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
50};
51
52iomux_v3_cfg_t const uart5_pads[] = {
53 MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
54 MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
55};
56
57iomux_v3_cfg_t const gpio_pads[] = {
58 /* LED enable */
59 MX6_PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
60 /* spi flash WP protect */
61 MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
62 /* backlight enable */
63 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
64 /* LED yellow */
65 MX6_PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
66 /* LED red */
67 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
68 /* LED green */
69 MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
70 /* LED blue */
71 MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
72 /* i2c4 scl */
73 MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
74 /* i2c4 sda */
75 MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
76 /* spi CS 1 */
77 MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
78};
79
80static iomux_v3_cfg_t const misc_pads[] = {
81 MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
82 /* OTG Power enable */
83 MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
84 MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
85};
86
87iomux_v3_cfg_t const enet_pads[] = {
88 MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(0x4001b0a8),
89 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
90 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
91 MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
92 MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
93 MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
94 MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
95 MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
96 MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
97 MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
98};
99
100static void setup_iomux_enet(void)
101{
102 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
103
104 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
105
106 /* set GPIO_16 as ENET_REF_CLK_OUT */
107 setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
108}
109
110static iomux_v3_cfg_t const backlight_pads[] = {
111 MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
112 MX6_PAD_SD4_DAT1__PWM3_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
113 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
114};
115
116iomux_v3_cfg_t const ecspi4_pads[] = {
117 MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
118 MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
119 MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
120 MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
121};
122
123static iomux_v3_cfg_t const display_pads[] = {
124 MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
125 MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
126 MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
127 MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
128 MX6_PAD_DI0_PIN4__GPIO4_IO20,
129 MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
130 MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
131 MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
132 MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
133 MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
134 MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
135 MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
136 MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
137 MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
138 MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
139 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
140 MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
141 MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
142 MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
143 MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
144 MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
145 MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
146 MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
147 MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
148 MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
149 MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
150 MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
151 MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
152 MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
153};
154
155int board_spi_cs_gpio(unsigned bus, unsigned cs)
156{
157 return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
158 ? (IMX_GPIO_NR(3, 20)) : -1;
159}
160
161static void setup_spi(void)
162{
163 int i;
164
165 imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
166 for (i = 0; i < 3; i++)
167 enable_spi_clk(true, i);
168
169 /* set cs1 to high */
170 gpio_direction_output(ECSPI4_CS1, 1);
171}
172
173static void setup_iomux_uart(void)
174{
175 imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
176}
177
178int board_eth_init(bd_t *bis)
179{
180 struct iomuxc *iomuxc_regs =
181 (struct iomuxc *)IOMUXC_BASE_ADDR;
182 int ret;
183
184 /* clear gpr1[14], gpr1[18:17] to select anatop clock */
185 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
186
Peng Fan6d97dc12015-08-12 17:46:50 +0800187 ret = enable_fec_anatop_clock(0, ENET_50MHZ);
Heiko Schocher7254d922015-05-18 13:32:31 +0200188 if (ret)
189 return ret;
190
191 setup_iomux_enet();
192 return cpu_eth_init(bis);
193}
194
195static void enable_lvds(struct display_info_t const *dev)
196{
197 imx_iomux_v3_setup_multiple_pads(
198 display_pads,
199 ARRAY_SIZE(display_pads));
200 imx_iomux_v3_setup_multiple_pads(
201 backlight_pads,
202 ARRAY_SIZE(backlight_pads));
203
204 /* enable backlight PWM 3 */
205 if (pwm_init(2, 0, 0))
206 goto error;
207 /* duty cycle 500ns, period: 3000ns */
208 if (pwm_config(2, 500, 3000))
209 goto error;
210 if (pwm_enable(2))
211 goto error;
212 return;
213
214error:
215 puts("error init pwm for backlight\n");
216 return;
217}
218
219static void setup_display(void)
220{
221 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
222 int reg;
223
224 enable_ipu_clock();
225
226 reg = readl(&mxc_ccm->cs2cdr);
227 /* select pll 5 clock */
228 reg &= MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK;
229 reg &= MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK;
230 writel(reg, &mxc_ccm->cs2cdr);
231
232 imx_iomux_v3_setup_multiple_pads(backlight_pads,
233 ARRAY_SIZE(backlight_pads));
234}
235
236static void setup_iomux_gpio(void)
237{
238 imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
239}
240
241int board_early_init_f(void)
242{
243 setup_iomux_uart();
244 setup_iomux_gpio();
245
246 setup_display();
247 return 0;
248}
249
250
251static void setup_i2c4(void)
252{
253 /* i2c4 not used, set it to gpio input */
254 gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl");
255 gpio_direction_input(IMX_GPIO_NR(1, 7));
256 gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda");
257 gpio_direction_input(IMX_GPIO_NR(1, 8));
258}
259
260static void setup_board_gpio(void)
261{
262 /* enable LED */
263 gpio_request(IMX_GPIO_NR(2, 13), "LED ena");
264 gpio_direction_output(IMX_GPIO_NR(2, 13), 0);
265
266 gpio_request(IMX_GPIO_NR(1, 3), "LED yellow");
267 gpio_direction_output(IMX_GPIO_NR(1, 3), 1);
268 gpio_request(IMX_GPIO_NR(1, 4), "LED red");
269 gpio_direction_output(IMX_GPIO_NR(1, 4), 1);
270 gpio_request(IMX_GPIO_NR(1, 5), "LED green");
271 gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
272 gpio_request(IMX_GPIO_NR(1, 6), "LED blue");
273 gpio_direction_output(IMX_GPIO_NR(1, 6), 1);
274}
275
276static void setup_board_spi(void)
277{
278}