blob: d3287cea194e3d813d18ef6c169f85dce82bfd0e [file] [log] [blame]
Stefan Roese8a316c92005-08-01 16:49:12 +02001/*
2 * (C) Copyright 2000-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <asm/processor.h>
26#include <spd_sdram.h>
27
28int board_early_init_f(void)
29{
30 /*-------------------------------------------------------------------------+
31 | Interrupt controller setup for the Walnut/Sycamore board.
32 | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
33 | IRQ 16 405GP internally generated; active low; level sensitive
34 | IRQ 17-24 RESERVED
35 | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
36 | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
37 | IRQ 27 (EXT IRQ 2) Not Used
38 | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
39 | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
40 | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
41 | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
42 | Note for Walnut board:
43 | An interrupt taken for the FPGA (IRQ 25) indicates that either
44 | the Mouse, Keyboard, IRDA, or External Expansion caused the
45 | interrupt. The FPGA must be read to determine which device
46 | caused the interrupt. The default setting of the FPGA clears
47 |
48 +-------------------------------------------------------------------------*/
49
Stefan Roese952e7762009-09-24 09:55:50 +020050 mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
51 mtdcr(UIC0ER, 0x00000000); /* disable all ints */
52 mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */
53 mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */
54 mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
55 mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
56 mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
Stefan Roese8a316c92005-08-01 16:49:12 +020057
58 /* set UART1 control to select CTS/RTS */
59#define FPGA_BRDC 0xF0300004
60 *(volatile char *)(FPGA_BRDC) |= 0x1;
61
62 return 0;
63}
64
65/*
66 * Check Board Identity:
67 */
68int checkboard(void)
69{
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +000070 char buf[64];
71 int i = getenv_f("serial#", buf, sizeof(buf));
Stefan Roese8a316c92005-08-01 16:49:12 +020072 uint pvr = get_pvr();
73
74 if (pvr == PVR_405GPR_RB) {
75 puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
76 } else {
77 puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
78 }
79
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +000080 if (i > 0) {
Stefan Roese8a316c92005-08-01 16:49:12 +020081 puts(", serial# ");
Wolfgang Denkf0c0b3a2011-05-04 10:32:28 +000082 puts(buf);
Stefan Roese8a316c92005-08-01 16:49:12 +020083 }
84 putc('\n');
85
86 return (0);
87}
88
89/*
Stefan Roese8a316c92005-08-01 16:49:12 +020090 * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
91 * the necessary info for SDRAM controller configuration
92 */
Becky Bruce9973e3c2008-06-09 16:03:40 -050093phys_size_t initdram(int board_type)
Stefan Roese8a316c92005-08-01 16:49:12 +020094{
Wolfgang Denkd87080b2006-03-31 18:32:53 +020095 return spd_sdram();
Stefan Roese8a316c92005-08-01 16:49:12 +020096}