blob: a647a65c20a0dbd3331445956a489f4b38c1f6fa [file] [log] [blame]
Chris Packham4bb0dea2018-05-17 21:45:57 +12001// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8 model = "Globalscale Technologies Dreamplug";
9 compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 pinctrl: pin-controller@10000 {
23 pmx_led_bluetooth: pmx-led-bluetooth {
24 marvell,pins = "mpp47";
25 marvell,function = "gpio";
26 };
27 pmx_led_wifi: pmx-led-wifi {
28 marvell,pins = "mpp48";
29 marvell,function = "gpio";
30 };
31 pmx_led_wifi_ap: pmx-led-wifi-ap {
32 marvell,pins = "mpp49";
33 marvell,function = "gpio";
34 };
35 };
36 serial@12000 {
37 status = "ok";
38 };
39
40 spi@10600 {
41 status = "okay";
42
43 m25p40@0 {
44 #address-cells = <1>;
45 #size-cells = <1>;
46 compatible = "mxicy,mx25l1606e", "jedec,spi-nor", "spi-flash";
47 reg = <0>;
48 spi-max-frequency = <50000000>;
49 mode = <0>;
50
51 partition@0 {
52 reg = <0x0 0x80000>;
53 label = "u-boot";
54 };
55
56 partition@100000 {
57 reg = <0x100000 0x10000>;
58 label = "u-boot env";
59 };
60
61 partition@180000 {
62 reg = <0x180000 0x10000>;
63 label = "dtb";
64 };
65 };
66 };
67
68 sata@80000 {
69 status = "okay";
70 nr-ports = <1>;
71 };
72
73 mvsdio@90000 {
74 pinctrl-0 = <&pmx_sdio>;
75 pinctrl-names = "default";
76 status = "okay";
77 /* No CD or WP GPIOs */
78 broken-cd;
79 };
80 };
81
82 gpio-leds {
83 compatible = "gpio-leds";
84 pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
85 &pmx_led_wifi_ap >;
86 pinctrl-names = "default";
87
88 bluetooth {
89 label = "dreamplug:blue:bluetooth";
90 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
91 };
92 wifi {
93 label = "dreamplug:green:wifi";
94 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
95 };
96 wifi-ap {
97 label = "dreamplug:green:wifi_ap";
98 gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
99 };
100 };
101};
102
103&mdio {
104 status = "okay";
105
106 ethphy0: ethernet-phy@0 {
107 reg = <0>;
108 };
109
110 ethphy1: ethernet-phy@1 {
111 reg = <1>;
112 };
113};
114
115&eth0 {
116 status = "okay";
117 ethernet0-port@0 {
118 phy-handle = <&ethphy0>;
119 };
120};
121
122&eth1 {
123 status = "okay";
124 ethernet1-port@0 {
125 phy-handle = <&ethphy1>;
126 };
127};