blob: 27a66a53e88c0edc48fd40651360fcbaf1f45c16 [file] [log] [blame]
Stefan Roese995b72d2012-05-30 22:59:08 +00001/*
2 * (C) Copyright 2009
3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4 *
5 * Copyright (C) 2012 Stefan Roese <sr@denx.de>
6 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Stefan Roese995b72d2012-05-30 22:59:08 +00008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13/*
14 * High Level Configuration Options
15 * (easy to change)
16 */
17#define CONFIG_SPEAR600 /* SPEAr600 SoC */
18#define CONFIG_X600 /* on X600 board */
Stefan Roese5822f5a2015-02-03 08:27:21 +010019#define CONFIG_SYS_GENERIC_BOARD
Stefan Roese995b72d2012-05-30 22:59:08 +000020
21#include <asm/arch/hardware.h>
22
23/* Timer, HZ specific defines */
Stefan Roese995b72d2012-05-30 22:59:08 +000024#define CONFIG_SYS_HZ_CLOCK 8300000
25
26#define CONFIG_SYS_TEXT_BASE 0x00800040
27#define CONFIG_SYS_FLASH_BASE 0xf8000000
28/* Reserve 8KiB for SPL */
29#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
30#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
31#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
32 CONFIG_SYS_SPL_LEN)
33#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
34#define CONFIG_SYS_MONITOR_LEN 0x60000
35
36#define CONFIG_ENV_IS_IN_FLASH
37
38/* Serial Configuration (PL011) */
39#define CONFIG_SYS_SERIAL0 0xD0000000
40#define CONFIG_SYS_SERIAL1 0xD0080000
41#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
42 (void *)CONFIG_SYS_SERIAL1 }
43#define CONFIG_PL011_SERIAL
44#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
45#define CONFIG_CONS_INDEX 0
46#define CONFIG_BAUDRATE 115200
47#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
48 57600, 115200 }
49#define CONFIG_SYS_LOADS_BAUD_CHANGE
50
51/* NOR FLASH config options */
52#define CONFIG_ST_SMI
53#define CONFIG_SYS_MAX_FLASH_BANKS 1
54#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
55#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
56#define CONFIG_SYS_MAX_FLASH_SECT 128
57#define CONFIG_SYS_FLASH_EMPTY_INFO
58#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
59#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
60
61/* NAND FLASH config options */
62#define CONFIG_NAND_FSMC
63#define CONFIG_SYS_NAND_SELF_INIT
64#define CONFIG_SYS_MAX_NAND_DEVICE 1
65#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
66#define CONFIG_MTD_ECC_SOFT
67#define CONFIG_SYS_FSMC_NAND_8BIT
68#define CONFIG_SYS_NAND_ONFI_DETECTION
69
70/* UBI/UBI config options */
71#define CONFIG_MTD_DEVICE
72#define CONFIG_MTD_PARTITIONS
73#define CONFIG_RBTREE
74
75/* Ethernet config options */
76#define CONFIG_MII
Stefan Roese995b72d2012-05-30 22:59:08 +000077#define CONFIG_NET_MULTI
Tom Rini1a78d282014-02-07 08:52:06 -050078#define CONFIG_PHYLIB
Stefan Roese995b72d2012-05-30 22:59:08 +000079#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
Stefan Roese995b72d2012-05-30 22:59:08 +000080#define CONFIG_PHY_ADDR 0 /* PHY address */
81#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
82
83#define CONFIG_SPEAR_GPIO
84
85/* I2C config options */
Stefan Roese678398b2014-10-28 12:12:00 +010086#define CONFIG_SYS_I2C
87#define CONFIG_SYS_I2C_DW
Alexey Brodkinf93f5892014-02-10 12:20:11 +040088#define CONFIG_SYS_I2C_BASE 0xD0200000
Stefan Roese995b72d2012-05-30 22:59:08 +000089#define CONFIG_SYS_I2C_SPEED 400000
90#define CONFIG_SYS_I2C_SLAVE 0x02
91#define CONFIG_I2C_CHIPADDRESS 0x50
92
93#define CONFIG_RTC_M41T62 1
94#define CONFIG_SYS_I2C_RTC_ADDR 0x68
95
96/* FPGA config options */
97#define CONFIG_FPGA
98#define CONFIG_FPGA_XILINX
99#define CONFIG_FPGA_SPARTAN3
100#define CONFIG_FPGA_COUNT 1
101
102/*
103 * Command support defines
104 */
105#define CONFIG_CMD_CACHE
106#define CONFIG_CMD_DATE
107#define CONFIG_CMD_DHCP
108#define CONFIG_CMD_ENV
109#define CONFIG_CMD_FPGA
Siva Durga Prasad Paladugu64e809a2014-03-14 16:35:38 +0530110#define CONFIG_CMD_FPGA_LOADMK
Stefan Roese995b72d2012-05-30 22:59:08 +0000111#define CONFIG_CMD_GPIO
112#define CONFIG_CMD_I2C
113#define CONFIG_CMD_MEMORY
114#define CONFIG_CMD_MII
115#define CONFIG_CMD_MTDPARTS
116#define CONFIG_CMD_NAND
117#define CONFIG_CMD_NET
118#define CONFIG_CMD_PING
119#define CONFIG_CMD_RUN
120#define CONFIG_CMD_SAVES
121#define CONFIG_CMD_UBI
122#define CONFIG_CMD_UBIFS
123#define CONFIG_LZO
124
125/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
126#include <config_cmd_default.h>
127
128#define CONFIG_BOOTDELAY 3
129
130#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
131#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
132
133/*
134 * U-Boot Environment placing definitions.
135 */
136#define CONFIG_ENV_SECT_SIZE 0x00010000
137#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
138 CONFIG_SYS_MONITOR_LEN)
139#define CONFIG_ENV_SIZE 0x02000
140#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
141 CONFIG_ENV_SECT_SIZE)
142#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
143
144/* Miscellaneous configurable options */
145#define CONFIG_ARCH_CPU_INIT
146#define CONFIG_DISPLAY_CPUINFO
147#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
148#define CONFIG_CMDLINE_TAG
149#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
150#define CONFIG_SETUP_MEMORY_TAGS
151#define CONFIG_MISC_INIT_R
152#define CONFIG_BOARD_LATE_INIT
153#define CONFIG_LOOPW /* enable loopw command */
154#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
155#define CONFIG_ZERO_BOOTDELAY_CHECK
156#define CONFIG_AUTOBOOT_KEYED
157#define CONFIG_AUTOBOOT_STOP_STR " "
158#define CONFIG_AUTOBOOT_PROMPT \
159 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
160
161#define CONFIG_SYS_MEMTEST_START 0x00800000
162#define CONFIG_SYS_MEMTEST_END 0x04000000
163#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
164#define CONFIG_IDENT_STRING "-SPEAr"
165#define CONFIG_SYS_LONGHELP
166#define CONFIG_SYS_PROMPT "X600> "
167#define CONFIG_CMDLINE_EDITING
168#define CONFIG_SYS_CBSIZE 256
169#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
170 sizeof(CONFIG_SYS_PROMPT) + 16)
171#define CONFIG_SYS_MAXARGS 16
172#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
173#define CONFIG_SYS_LOAD_ADDR 0x00800000
174#define CONFIG_SYS_CONSOLE_INFO_QUIET
Stefan Roese995b72d2012-05-30 22:59:08 +0000175
176/* Use last 2 lwords in internal SRAM for bootcounter */
177#define CONFIG_BOOTCOUNT_LIMIT
178#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8
179
180#define CONFIG_HOSTNAME x600
181#define CONFIG_UBI_PART ubi0
182#define CONFIG_UBIFS_VOLUME rootfs
183
Stefan Roese995b72d2012-05-30 22:59:08 +0000184#define MTDIDS_DEFAULT "nand0=nand"
185#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)"
186
187#define CONFIG_EXTRA_ENV_SETTINGS \
188 "u-boot_addr=1000000\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200189 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000190 "load=tftp ${u-boot_addr} ${u-boot}\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200191 "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
192 " +${filesize};" \
193 "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
194 "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
Stefan Roese995b72d2012-05-30 22:59:08 +0000195 " ${filesize};" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200196 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
Stefan Roese995b72d2012-05-30 22:59:08 +0000197 " +${filesize}\0" \
198 "upd=run load update\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200199 "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
200 "part=" __stringify(CONFIG_UBI_PART) "\0" \
201 "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000202 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
203 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
204 " ${filesize}\0" \
205 "upd_ubifs=run load_ubifs update_ubifs\0" \
206 "init_ubifs=nand erase.part ubi0;ubi part ${part};" \
207 "ubi create ${vol} 4000000\0" \
208 "netdev=eth0\0" \
209 "rootpath=/opt/eldk-4.2/arm\0" \
210 "nfsargs=setenv bootargs root=/dev/nfs rw " \
211 "nfsroot=${serverip}:${rootpath}\0" \
212 "ramargs=setenv bootargs root=/dev/ram rw\0" \
213 "boot_part=0\0" \
214 "altbootcmd=if test $boot_part -eq 0;then " \
215 "echo Switching to partition 1!;" \
216 "setenv boot_part 1;" \
217 "else; " \
218 "echo Switching to partition 0!;" \
219 "setenv boot_part 0;" \
220 "fi;" \
221 "saveenv;boot\0" \
222 "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
223 "root=ubi0:rootfs rootfstype=ubifs\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200224 "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000225 "kernel_fs=/boot/uImage \0" \
226 "kernel_addr=1000000\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200227 "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
228 __stringify(CONFIG_HOSTNAME) ".dtb\0" \
229 "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000230 "dtb_addr=1800000\0" \
231 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
232 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
233 "addip=setenv bootargs ${bootargs} " \
234 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
235 ":${hostname}:${netdev}:off panic=1\0" \
236 "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
237 "${baudrate}\0" \
238 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
239 "net_nfs=run load_dtb load_kernel; " \
240 "run nfsargs addip addcon addmtd addmisc;" \
241 "bootm ${kernel_addr} - ${dtb_addr}\0" \
242 "mtdids=" MTDIDS_DEFAULT "\0" \
243 "mtdparts=" MTDPARTS_DEFAULT "\0" \
244 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
245 " addcon addmisc addmtd;" \
246 "bootm ${kernel_addr} - ${dtb_addr}\0" \
Joe Hershberger949a7712012-11-01 16:54:18 +0000247 "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \
Stefan Roese995b72d2012-05-30 22:59:08 +0000248 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
249 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
250 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
251 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
252 "bootcmd=run nand_ubifs\0" \
253 "\0"
254
255/* Stack sizes */
256#define CONFIG_STACKSIZE (512 * 1024)
257
258/* Physical Memory Map */
259#define CONFIG_NR_DRAM_BANKS 1
260#define PHYS_SDRAM_1 0x00000000
261#define PHYS_SDRAM_1_MAXSIZE 0x40000000
262
263#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
264#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
265#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
266
267#define CONFIG_SYS_INIT_SP_OFFSET \
268 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
269
270#define CONFIG_SYS_INIT_SP_ADDR \
271 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
272
273/*
274 * SPL related defines
275 */
Stefan Roese995b72d2012-05-30 22:59:08 +0000276#define CONFIG_SPL_TEXT_BASE 0xd2800b00
277#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
278#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
279
280#define CONFIG_SPL_SERIAL_SUPPORT
281#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
282#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
283#define CONFIG_SPL_NO_PRINTF
284
285/*
286 * Please select/define only one of the following
287 * Each definition corresponds to a supported DDR chip.
288 * DDR configuration is based on the following selection
289 */
290#define CONFIG_DDR_MT47H64M16 1
291#define CONFIG_DDR_MT47H32M16 0
292#define CONFIG_DDR_MT47H128M8 0
293
294/*
295 * Synchronous/Asynchronous operation of DDR
296 *
297 * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
298 * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
299 * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
300 */
301#define CONFIG_DDR_2HCLK 1
302#define CONFIG_DDR_HCLK 0
303#define CONFIG_DDR_PLL2 0
304
305/*
306 * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
307 * or not. Modify/Add to only these macros to define new boot types
308 */
309#define USB_BOOT_SUPPORTED 0
310#define PCIE_BOOT_SUPPORTED 0
311#define SNOR_BOOT_SUPPORTED 1
312#define NAND_BOOT_SUPPORTED 1
313#define PNOR_BOOT_SUPPORTED 0
314#define TFTP_BOOT_SUPPORTED 0
315#define UART_BOOT_SUPPORTED 0
316#define SPI_BOOT_SUPPORTED 0
317#define I2C_BOOT_SUPPORTED 0
318#define MMC_BOOT_SUPPORTED 0
319
320#endif /* __CONFIG_H */