blob: f1915a8200680b6658a6b31d6179c5c0c6bbc76d [file] [log] [blame]
Fabio Estevam57ca4322013-04-10 09:32:58 +00001/*
2 * Copyright (C) 2013 Freescale Semiconductor, Inc.
3 *
4 * Author: Fabio Estevam <fabio.estevam@freescale.com>
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Fabio Estevam57ca4322013-04-10 09:32:58 +00007 */
8
9#include <asm/arch/clock.h>
10#include <asm/arch/iomux.h>
Peng Fane7d3b212015-08-17 16:11:05 +080011#include <asm/arch/crm_regs.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000012#include <asm/arch/imx-regs.h>
Peng Fane7d3b212015-08-17 16:11:05 +080013#include <asm/arch/mx6-ddr.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000014#include <asm/arch/mx6-pins.h>
15#include <asm/arch/sys_proto.h>
16#include <asm/gpio.h>
17#include <asm/imx-common/iomux-v3.h>
Peng Fanaf38bf62015-02-12 09:36:29 +080018#include <asm/imx-common/mxc_i2c.h>
Eric Nelson3acb0112014-09-30 15:40:03 -070019#include <asm/imx-common/spi.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000020#include <asm/io.h>
Alexey Brodkin1ace4022014-02-26 17:47:58 +040021#include <linux/sizes.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000022#include <common.h>
23#include <fsl_esdhc.h>
Peng Fanaf38bf62015-02-12 09:36:29 +080024#include <i2c.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000025#include <mmc.h>
Fabio Estevam31f07962013-09-13 00:36:28 -030026#include <netdev.h>
Peng Fanaf38bf62015-02-12 09:36:29 +080027#include <power/pmic.h>
28#include <power/pfuze100_pmic.h>
29#include "../common/pfuze.h"
Peng Fan3b9c1a52014-11-10 08:50:41 +080030#include <usb.h>
Mateusz Kulikowskie162c6b2016-03-31 23:12:23 +020031#include <usb/ehci-ci.h>
Fabio Estevam57ca4322013-04-10 09:32:58 +000032
33DECLARE_GLOBAL_DATA_PTR;
34
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000035#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
36 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
37 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
Fabio Estevam57ca4322013-04-10 09:32:58 +000038
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000039#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
40 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
41 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
Fabio Estevam57ca4322013-04-10 09:32:58 +000042
Fabio Estevam31f07962013-09-13 00:36:28 -030043#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
44 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
45 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
46
Fabio Estevam694c3bc2014-04-11 08:39:43 -030047#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
48 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
49
Peng Fanaf38bf62015-02-12 09:36:29 +080050#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
51 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
52 PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
53 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
54
Fabio Estevam16edd342015-02-28 14:25:46 -030055#define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
56 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
57 PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \
58 PAD_CTL_SRE_FAST)
59
Fabio Estevamae765f32016-03-11 10:50:22 -030060#define ETH_PHY_POWER IMX_GPIO_NR(4, 21)
Fabio Estevam31f07962013-09-13 00:36:28 -030061
Fabio Estevam57ca4322013-04-10 09:32:58 +000062int dram_init(void)
63{
64 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
65
66 return 0;
67}
68
69static iomux_v3_cfg_t const uart1_pads[] = {
70 MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
71 MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
72};
73
Ye.Li36255d62014-10-30 18:30:54 +080074static iomux_v3_cfg_t const usdhc1_pads[] = {
75 /* 8 bit SD */
76 MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
77 MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
78 MX6_PAD_SD1_DAT0__USDHC1_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
79 MX6_PAD_SD1_DAT1__USDHC1_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
80 MX6_PAD_SD1_DAT2__USDHC1_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
81 MX6_PAD_SD1_DAT3__USDHC1_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
82 MX6_PAD_SD1_DAT4__USDHC1_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
83 MX6_PAD_SD1_DAT5__USDHC1_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
84 MX6_PAD_SD1_DAT6__USDHC1_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
85 MX6_PAD_SD1_DAT7__USDHC1_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
86
87 /*CD pin*/
88 MX6_PAD_KEY_ROW7__GPIO_4_7 | MUX_PAD_CTRL(NO_PAD_CTRL),
89};
90
Fabio Estevam57ca4322013-04-10 09:32:58 +000091static iomux_v3_cfg_t const usdhc2_pads[] = {
92 MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
93 MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
94 MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
95 MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
96 MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
97 MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
Ye.Li36255d62014-10-30 18:30:54 +080098
99 /*CD pin*/
100 MX6_PAD_SD2_DAT7__GPIO_5_0 | MUX_PAD_CTRL(NO_PAD_CTRL),
101};
102
103static iomux_v3_cfg_t const usdhc3_pads[] = {
104 MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
105 MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
106 MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
107 MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
108 MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
109 MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
110
111 /*CD pin*/
112 MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL),
Fabio Estevam57ca4322013-04-10 09:32:58 +0000113};
114
Fabio Estevam31f07962013-09-13 00:36:28 -0300115static iomux_v3_cfg_t const fec_pads[] = {
116 MX6_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
117 MX6_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
118 MX6_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(ENET_PAD_CTRL),
119 MX6_PAD_FEC_RXD0__FEC_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
120 MX6_PAD_FEC_RXD1__FEC_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
121 MX6_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
122 MX6_PAD_FEC_TXD0__FEC_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
123 MX6_PAD_FEC_TXD1__FEC_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
124 MX6_PAD_FEC_REF_CLK__FEC_REF_OUT | MUX_PAD_CTRL(ENET_PAD_CTRL),
125 MX6_PAD_FEC_RX_ER__GPIO_4_19 | MUX_PAD_CTRL(NO_PAD_CTRL),
126 MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
127};
128
Fabio Estevam694c3bc2014-04-11 08:39:43 -0300129#ifdef CONFIG_MXC_SPI
130static iomux_v3_cfg_t ecspi1_pads[] = {
131 MX6_PAD_ECSPI1_MISO__ECSPI_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
132 MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
133 MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
134 MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
135};
136
Nikita Kiryanov155fa9a2014-08-20 15:08:50 +0300137int board_spi_cs_gpio(unsigned bus, unsigned cs)
138{
139 return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1;
140}
141
Fabio Estevam694c3bc2014-04-11 08:39:43 -0300142static void setup_spi(void)
143{
144 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
145}
146#endif
147
Fabio Estevam57ca4322013-04-10 09:32:58 +0000148static void setup_iomux_uart(void)
149{
150 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
151}
152
Fabio Estevam31f07962013-09-13 00:36:28 -0300153static void setup_iomux_fec(void)
154{
155 imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
156
Fabio Estevamae765f32016-03-11 10:50:22 -0300157 /* Power up LAN8720 PHY */
158 gpio_direction_output(ETH_PHY_POWER , 1);
159 udelay(15000);
Fabio Estevam31f07962013-09-13 00:36:28 -0300160}
161
Ye.Li36255d62014-10-30 18:30:54 +0800162#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7)
163#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0)
164#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22)
165
166static struct fsl_esdhc_cfg usdhc_cfg[3] = {
167 {USDHC1_BASE_ADDR},
168 {USDHC2_BASE_ADDR, 0, 4},
169 {USDHC3_BASE_ADDR, 0, 4},
Fabio Estevam57ca4322013-04-10 09:32:58 +0000170};
171
Peng Fanfb0d0422016-01-28 16:51:27 +0800172int board_mmc_get_env_dev(int devno)
173{
174 return devno;
175}
176
Fabio Estevam57ca4322013-04-10 09:32:58 +0000177int board_mmc_getcd(struct mmc *mmc)
178{
Ye.Li36255d62014-10-30 18:30:54 +0800179 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
180 int ret = 0;
181
182 switch (cfg->esdhc_base) {
183 case USDHC1_BASE_ADDR:
184 ret = !gpio_get_value(USDHC1_CD_GPIO);
185 break;
186 case USDHC2_BASE_ADDR:
187 ret = !gpio_get_value(USDHC2_CD_GPIO);
188 break;
189 case USDHC3_BASE_ADDR:
190 ret = !gpio_get_value(USDHC3_CD_GPIO);
191 break;
192 }
193
194 return ret;
Fabio Estevam57ca4322013-04-10 09:32:58 +0000195}
196
197int board_mmc_init(bd_t *bis)
198{
Peng Fane7d3b212015-08-17 16:11:05 +0800199#ifndef CONFIG_SPL_BUILD
Ye.Li36255d62014-10-30 18:30:54 +0800200 int i, ret;
Fabio Estevam57ca4322013-04-10 09:32:58 +0000201
Ye.Li36255d62014-10-30 18:30:54 +0800202 /*
203 * According to the board_mmc_init() the following map is done:
Bin Menga1875592016-02-05 19:30:11 -0800204 * (U-Boot device node) (Physical Port)
Ye.Li36255d62014-10-30 18:30:54 +0800205 * mmc0 USDHC1
206 * mmc1 USDHC2
207 * mmc2 USDHC3
208 */
209 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
210 switch (i) {
211 case 0:
212 imx_iomux_v3_setup_multiple_pads(
213 usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
214 gpio_direction_input(USDHC1_CD_GPIO);
215 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
216 break;
217 case 1:
218 imx_iomux_v3_setup_multiple_pads(
219 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
220 gpio_direction_input(USDHC2_CD_GPIO);
221 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
222 break;
223 case 2:
224 imx_iomux_v3_setup_multiple_pads(
225 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
226 gpio_direction_input(USDHC3_CD_GPIO);
227 usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
228 break;
229 default:
230 printf("Warning: you configured more USDHC controllers"
231 "(%d) than supported by the board\n", i + 1);
232 return -EINVAL;
233 }
234
235 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
236 if (ret) {
237 printf("Warning: failed to initialize "
238 "mmc dev %d\n", i);
239 return ret;
240 }
241 }
242
243 return 0;
Peng Fane7d3b212015-08-17 16:11:05 +0800244#else
245 struct src *src_regs = (struct src *)SRC_BASE_ADDR;
246 u32 val;
247 u32 port;
248
249 val = readl(&src_regs->sbmr1);
250
251 /* Boot from USDHC */
252 port = (val >> 11) & 0x3;
253 switch (port) {
254 case 0:
255 imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
256 ARRAY_SIZE(usdhc1_pads));
257 gpio_direction_input(USDHC1_CD_GPIO);
258 usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
259 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
260 break;
261 case 1:
262 imx_iomux_v3_setup_multiple_pads(usdhc2_pads,
263 ARRAY_SIZE(usdhc2_pads));
264 gpio_direction_input(USDHC2_CD_GPIO);
265 usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
266 usdhc_cfg[0].max_bus_width = 4;
267 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
268 break;
269 case 2:
270 imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
271 ARRAY_SIZE(usdhc3_pads));
272 gpio_direction_input(USDHC3_CD_GPIO);
273 usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
274 usdhc_cfg[0].max_bus_width = 4;
275 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
276 break;
277 }
278
279 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
280 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
281#endif
Fabio Estevam57ca4322013-04-10 09:32:58 +0000282}
283
Peng Fanaf38bf62015-02-12 09:36:29 +0800284#ifdef CONFIG_SYS_I2C_MXC
285#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
286/* I2C1 for PMIC */
287struct i2c_pads_info i2c_pad_info1 = {
288 .sda = {
289 .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
290 .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
291 .gp = IMX_GPIO_NR(3, 13),
292 },
293 .scl = {
294 .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
295 .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
296 .gp = IMX_GPIO_NR(3, 12),
297 },
298};
299
300int power_init_board(void)
301{
302 struct pmic *p;
303
304 p = pfuze_common_init(I2C_PMIC);
305 if (!p)
306 return -ENODEV;
307
308 return pfuze_mode_init(p, APS_PFM);
309}
310#endif
311
Fabio Estevam31f07962013-09-13 00:36:28 -0300312#ifdef CONFIG_FEC_MXC
313int board_eth_init(bd_t *bis)
314{
Fabio Estevam31f07962013-09-13 00:36:28 -0300315 setup_iomux_fec();
316
Fabio Estevam12c20c02014-01-04 17:36:33 -0200317 return cpu_eth_init(bis);
Fabio Estevam31f07962013-09-13 00:36:28 -0300318}
319
320static int setup_fec(void)
321{
Fabio Estevam0a11d6f2014-07-09 17:59:54 -0300322 struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
Fabio Estevam31f07962013-09-13 00:36:28 -0300323
324 /* clear gpr1[14], gpr1[18:17] to select anatop clock */
325 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
326
Peng Fan6d97dc12015-08-12 17:46:50 +0800327 return enable_fec_anatop_clock(0, ENET_50MHZ);
Fabio Estevam31f07962013-09-13 00:36:28 -0300328}
329#endif
330
Peng Fan3b9c1a52014-11-10 08:50:41 +0800331#ifdef CONFIG_USB_EHCI_MX6
332#define USB_OTHERREGS_OFFSET 0x800
333#define UCTRL_PWR_POL (1 << 9)
334
335static iomux_v3_cfg_t const usb_otg_pads[] = {
336 /* OTG1 */
337 MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
Fabio Estevam16edd342015-02-28 14:25:46 -0300338 MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(OTGID_PAD_CTRL),
Peng Fan3b9c1a52014-11-10 08:50:41 +0800339 /* OTG2 */
340 MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
341};
342
343static void setup_usb(void)
344{
345 imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
346 ARRAY_SIZE(usb_otg_pads));
347}
348
349int board_usb_phy_mode(int port)
350{
351 if (port == 1)
352 return USB_INIT_HOST;
353 else
354 return usb_phy_mode(port);
355}
356
357int board_ehci_hcd_init(int port)
358{
359 u32 *usbnc_usb_ctrl;
360
361 if (port > 1)
362 return -EINVAL;
363
364 usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
365 port * 4);
366
367 /* Set Power polarity */
368 setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
369
370 return 0;
371}
372#endif
Fabio Estevam31f07962013-09-13 00:36:28 -0300373
Fabio Estevam57ca4322013-04-10 09:32:58 +0000374int board_early_init_f(void)
375{
376 setup_iomux_uart();
Fabio Estevam694c3bc2014-04-11 08:39:43 -0300377#ifdef CONFIG_MXC_SPI
378 setup_spi();
379#endif
Fabio Estevam57ca4322013-04-10 09:32:58 +0000380 return 0;
381}
382
383int board_init(void)
384{
385 /* address of boot parameters */
386 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
387
Peng Fanaf38bf62015-02-12 09:36:29 +0800388#ifdef CONFIG_SYS_I2C_MXC
389 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
390#endif
391
Fabio Estevam31f07962013-09-13 00:36:28 -0300392#ifdef CONFIG_FEC_MXC
393 setup_fec();
394#endif
Peng Fan3b9c1a52014-11-10 08:50:41 +0800395
396#ifdef CONFIG_USB_EHCI_MX6
397 setup_usb();
398#endif
399
Fabio Estevam57ca4322013-04-10 09:32:58 +0000400 return 0;
401}
402
Fabio Estevam57ca4322013-04-10 09:32:58 +0000403int checkboard(void)
404{
405 puts("Board: MX6SLEVK\n");
406
407 return 0;
408}
Peng Fane7d3b212015-08-17 16:11:05 +0800409
410#ifdef CONFIG_SPL_BUILD
411#include <spl.h>
412#include <libfdt.h>
413
414const struct mx6sl_iomux_ddr_regs mx6_ddr_ioregs = {
415 .dram_sdqs0 = 0x00003030,
416 .dram_sdqs1 = 0x00003030,
417 .dram_sdqs2 = 0x00003030,
418 .dram_sdqs3 = 0x00003030,
419 .dram_dqm0 = 0x00000030,
420 .dram_dqm1 = 0x00000030,
421 .dram_dqm2 = 0x00000030,
422 .dram_dqm3 = 0x00000030,
423 .dram_cas = 0x00000030,
424 .dram_ras = 0x00000030,
425 .dram_sdclk_0 = 0x00000028,
426 .dram_reset = 0x00000030,
427 .dram_sdba2 = 0x00000000,
428 .dram_odt0 = 0x00000008,
429 .dram_odt1 = 0x00000008,
430};
431
432const struct mx6sl_iomux_grp_regs mx6_grp_ioregs = {
433 .grp_b0ds = 0x00000030,
434 .grp_b1ds = 0x00000030,
435 .grp_b2ds = 0x00000030,
436 .grp_b3ds = 0x00000030,
437 .grp_addds = 0x00000030,
438 .grp_ctlds = 0x00000030,
439 .grp_ddrmode_ctl = 0x00020000,
440 .grp_ddrpke = 0x00000000,
441 .grp_ddrmode = 0x00020000,
442 .grp_ddr_type = 0x00080000,
443};
444
445const struct mx6_mmdc_calibration mx6_mmcd_calib = {
446 .p0_mpdgctrl0 = 0x20000000,
447 .p0_mpdgctrl1 = 0x00000000,
448 .p0_mprddlctl = 0x4241444a,
449 .p0_mpwrdlctl = 0x3030312b,
450 .mpzqlp2ctl = 0x1b4700c7,
451};
452
453static struct mx6_lpddr2_cfg mem_ddr = {
454 .mem_speed = 800,
455 .density = 4,
456 .width = 32,
457 .banks = 8,
458 .rowaddr = 14,
459 .coladdr = 10,
460 .trcd_lp = 2000,
461 .trppb_lp = 2000,
462 .trpab_lp = 2250,
463 .trasmin = 4200,
464};
465
466static void ccgr_init(void)
467{
468 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
469
470 writel(0xFFFFFFFF, &ccm->CCGR0);
471 writel(0xFFFFFFFF, &ccm->CCGR1);
472 writel(0xFFFFFFFF, &ccm->CCGR2);
473 writel(0xFFFFFFFF, &ccm->CCGR3);
474 writel(0xFFFFFFFF, &ccm->CCGR4);
475 writel(0xFFFFFFFF, &ccm->CCGR5);
476 writel(0xFFFFFFFF, &ccm->CCGR6);
477
478 writel(0x00260324, &ccm->cbcmr);
479}
480
481static void spl_dram_init(void)
482{
483 struct mx6_ddr_sysinfo sysinfo = {
484 .dsize = mem_ddr.width / 32,
485 .cs_density = 20,
486 .ncs = 2,
487 .cs1_mirror = 0,
488 .walat = 0,
489 .ralat = 2,
490 .mif3_mode = 3,
491 .bi_on = 1,
492 .rtt_wr = 0, /* LPDDR2 does not need rtt_wr rtt_nom */
493 .rtt_nom = 0,
494 .sde_to_rst = 0, /* LPDDR2 does not need this field */
495 .rst_to_cke = 0x10, /* JEDEC value for LPDDR2: 200us */
496 .ddr_type = DDR_TYPE_LPDDR2,
497 };
498 mx6sl_dram_iocfg(32, &mx6_ddr_ioregs, &mx6_grp_ioregs);
499 mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
500}
501
502void board_init_f(ulong dummy)
503{
504 /* setup AIPS and disable watchdog */
505 arch_cpu_init();
506
507 ccgr_init();
508
509 /* iomux and setup of i2c */
510 board_early_init_f();
511
512 /* setup GP timer */
513 timer_init();
514
515 /* UART clocks enabled and gd valid - init serial console */
516 preloader_console_init();
517
518 /* DDR initialization */
519 spl_dram_init();
520
521 /* Clear the BSS. */
522 memset(__bss_start, 0, __bss_end - __bss_start);
523
524 /* load/boot image from boot device */
525 board_init_r(NULL, 0);
526}
Peng Fane7d3b212015-08-17 16:11:05 +0800527#endif