Rajeshwari Shinde | 511ed5f | 2012-10-25 19:49:22 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Samsung Electronics |
| 3 | * R. Chandrasekar <rcsekar@samsung.com> |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #include <asm/arch/clk.h> |
| 25 | #include <asm/arch/pinmux.h> |
| 26 | #include <asm/arch/i2s-regs.h> |
| 27 | #include <asm/io.h> |
| 28 | #include <common.h> |
| 29 | #include <sound.h> |
| 30 | #include <i2s.h> |
| 31 | |
| 32 | #define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) |
| 33 | #define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) |
| 34 | #define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) |
| 35 | #define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) |
| 36 | #define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) |
| 37 | |
| 38 | #define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */ |
| 39 | |
| 40 | /* |
| 41 | * Sets the frame size for I2S LR clock |
| 42 | * |
| 43 | * @param i2s_reg i2s regiter address |
| 44 | * @param rfs Frame Size |
| 45 | */ |
| 46 | static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs) |
| 47 | { |
| 48 | unsigned int mod = readl(&i2s_reg->mod); |
| 49 | |
| 50 | mod &= ~MOD_RCLK_MASK; |
| 51 | |
| 52 | switch (rfs) { |
| 53 | case 768: |
| 54 | mod |= MOD_RCLK_768FS; |
| 55 | break; |
| 56 | case 512: |
| 57 | mod |= MOD_RCLK_512FS; |
| 58 | break; |
| 59 | case 384: |
| 60 | mod |= MOD_RCLK_384FS; |
| 61 | break; |
| 62 | default: |
| 63 | mod |= MOD_RCLK_256FS; |
| 64 | break; |
| 65 | } |
| 66 | |
| 67 | writel(mod, &i2s_reg->mod); |
| 68 | } |
| 69 | |
| 70 | /* |
| 71 | * Sets the i2s transfer control |
| 72 | * |
| 73 | * @param i2s_reg i2s regiter address |
| 74 | * @param on 1 enable tx , 0 disable tx transfer |
| 75 | */ |
| 76 | static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) |
| 77 | { |
| 78 | unsigned int con = readl(&i2s_reg->con); |
| 79 | unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK; |
| 80 | |
| 81 | if (on) { |
| 82 | con |= CON_ACTIVE; |
| 83 | con &= ~CON_TXCH_PAUSE; |
| 84 | |
| 85 | } else { |
| 86 | |
| 87 | con |= CON_TXCH_PAUSE; |
| 88 | con &= ~CON_ACTIVE; |
| 89 | } |
| 90 | |
| 91 | writel(mod, &i2s_reg->mod); |
| 92 | writel(con, &i2s_reg->con); |
| 93 | } |
| 94 | |
| 95 | /* |
| 96 | * set the bit clock frame size (in multiples of LRCLK) |
| 97 | * |
| 98 | * @param i2s_reg i2s regiter address |
| 99 | * @param bfs bit Frame Size |
| 100 | */ |
| 101 | static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs) |
| 102 | { |
| 103 | unsigned int mod = readl(&i2s_reg->mod); |
| 104 | |
| 105 | mod &= ~MOD_BCLK_MASK; |
| 106 | |
| 107 | switch (bfs) { |
| 108 | case 48: |
| 109 | mod |= MOD_BCLK_48FS; |
| 110 | break; |
| 111 | case 32: |
| 112 | mod |= MOD_BCLK_32FS; |
| 113 | break; |
| 114 | case 24: |
| 115 | mod |= MOD_BCLK_24FS; |
| 116 | break; |
| 117 | case 16: |
| 118 | mod |= MOD_BCLK_16FS; |
| 119 | break; |
| 120 | default: |
| 121 | return; |
| 122 | } |
| 123 | writel(mod, &i2s_reg->mod); |
| 124 | } |
| 125 | |
| 126 | /* |
| 127 | * flushes the i2stx fifo |
| 128 | * |
| 129 | * @param i2s_reg i2s regiter address |
| 130 | * @param flush Tx fifo flush command (0x00 - do not flush |
| 131 | * 0x80 - flush tx fifo) |
| 132 | */ |
| 133 | void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) |
| 134 | { |
| 135 | /* Flush the FIFO */ |
| 136 | setbits_le32(&i2s_reg->fic, flush); |
| 137 | clrbits_le32(&i2s_reg->fic, flush); |
| 138 | } |
| 139 | |
| 140 | /* |
| 141 | * Set System Clock direction |
| 142 | * |
| 143 | * @param i2s_reg i2s regiter address |
| 144 | * @param dir Clock direction |
| 145 | * |
| 146 | * @return int value 0 for success, -1 in case of error |
| 147 | */ |
| 148 | int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) |
| 149 | { |
| 150 | unsigned int mod = readl(&i2s_reg->mod); |
| 151 | |
| 152 | if (dir == SND_SOC_CLOCK_IN) |
| 153 | mod |= MOD_CDCLKCON; |
| 154 | else |
| 155 | mod &= ~MOD_CDCLKCON; |
| 156 | |
| 157 | writel(mod, &i2s_reg->mod); |
| 158 | |
| 159 | return 0; |
| 160 | } |
| 161 | |
| 162 | /* |
| 163 | * Sets I2S Clcok format |
| 164 | * |
| 165 | * @param fmt i2s clock properties |
| 166 | * @param i2s_reg i2s regiter address |
| 167 | * |
| 168 | * @return int value 0 for success, -1 in case of error |
| 169 | */ |
| 170 | int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) |
| 171 | { |
| 172 | unsigned int mod = readl(&i2s_reg->mod); |
| 173 | unsigned int tmp = 0; |
| 174 | unsigned int ret = 0; |
| 175 | |
| 176 | /* Format is priority */ |
| 177 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| 178 | case SND_SOC_DAIFMT_RIGHT_J: |
| 179 | tmp |= MOD_LR_RLOW; |
| 180 | tmp |= MOD_SDF_MSB; |
| 181 | break; |
| 182 | case SND_SOC_DAIFMT_LEFT_J: |
| 183 | tmp |= MOD_LR_RLOW; |
| 184 | tmp |= MOD_SDF_LSB; |
| 185 | break; |
| 186 | case SND_SOC_DAIFMT_I2S: |
| 187 | tmp |= MOD_SDF_IIS; |
| 188 | break; |
| 189 | default: |
| 190 | debug("%s: Invalid format priority [0x%x]\n", __func__, |
| 191 | (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); |
| 192 | return -1; |
| 193 | } |
| 194 | |
| 195 | /* |
| 196 | * INV flag is relative to the FORMAT flag - if set it simply |
| 197 | * flips the polarity specified by the Standard |
| 198 | */ |
| 199 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| 200 | case SND_SOC_DAIFMT_NB_NF: |
| 201 | break; |
| 202 | case SND_SOC_DAIFMT_NB_IF: |
| 203 | if (tmp & MOD_LR_RLOW) |
| 204 | tmp &= ~MOD_LR_RLOW; |
| 205 | else |
| 206 | tmp |= MOD_LR_RLOW; |
| 207 | break; |
| 208 | default: |
| 209 | debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, |
| 210 | (fmt & SND_SOC_DAIFMT_INV_MASK)); |
| 211 | return -1; |
| 212 | } |
| 213 | |
| 214 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| 215 | case SND_SOC_DAIFMT_CBS_CFS: |
| 216 | tmp |= MOD_SLAVE; |
| 217 | break; |
| 218 | case SND_SOC_DAIFMT_CBM_CFM: |
| 219 | /* Set default source clock in Master mode */ |
| 220 | ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT); |
| 221 | if (ret != 0) { |
| 222 | debug("%s:set i2s clock direction failed\n", __func__); |
| 223 | return -1; |
| 224 | } |
| 225 | break; |
| 226 | default: |
| 227 | debug("%s: Invalid master selection [0x%x]\n", __func__, |
| 228 | (fmt & SND_SOC_DAIFMT_MASTER_MASK)); |
| 229 | return -1; |
| 230 | } |
| 231 | |
| 232 | mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); |
| 233 | mod |= tmp; |
| 234 | writel(mod, &i2s_reg->mod); |
| 235 | |
| 236 | return 0; |
| 237 | } |
| 238 | |
| 239 | /* |
| 240 | * Sets the sample width in bits |
| 241 | * |
| 242 | * @param blc samplewidth (size of sample in bits) |
| 243 | * @param i2s_reg i2s regiter address |
| 244 | * |
| 245 | * @return int value 0 for success, -1 in case of error |
| 246 | */ |
| 247 | int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) |
| 248 | { |
| 249 | unsigned int mod = readl(&i2s_reg->mod); |
| 250 | |
| 251 | mod &= ~MOD_BLCP_MASK; |
| 252 | mod &= ~MOD_BLC_MASK; |
| 253 | |
| 254 | switch (blc) { |
| 255 | case 8: |
| 256 | mod |= MOD_BLCP_8BIT; |
| 257 | mod |= MOD_BLC_8BIT; |
| 258 | break; |
| 259 | case 16: |
| 260 | mod |= MOD_BLCP_16BIT; |
| 261 | mod |= MOD_BLC_16BIT; |
| 262 | break; |
| 263 | case 24: |
| 264 | mod |= MOD_BLCP_24BIT; |
| 265 | mod |= MOD_BLC_24BIT; |
| 266 | break; |
| 267 | default: |
| 268 | debug("%s: Invalid sample size input [0x%x]\n", |
| 269 | __func__, blc); |
| 270 | return -1; |
| 271 | } |
| 272 | writel(mod, &i2s_reg->mod); |
| 273 | |
| 274 | return 0; |
| 275 | } |
| 276 | |
| 277 | int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data, |
| 278 | unsigned long data_size) |
| 279 | { |
| 280 | int i; |
| 281 | int start; |
| 282 | struct i2s_reg *i2s_reg = |
| 283 | (struct i2s_reg *)pi2s_tx->base_address; |
| 284 | |
| 285 | if (data_size < FIFO_LENGTH) { |
| 286 | debug("%s : Invalid data size\n", __func__); |
| 287 | return -1; /* invalid pcm data size */ |
| 288 | } |
| 289 | |
| 290 | /* fill the tx buffer before stating the tx transmit */ |
| 291 | for (i = 0; i < FIFO_LENGTH; i++) |
| 292 | writel(*data++, &i2s_reg->txd); |
| 293 | |
| 294 | data_size -= FIFO_LENGTH; |
| 295 | i2s_txctrl(i2s_reg, I2S_TX_ON); |
| 296 | |
| 297 | while (data_size > 0) { |
| 298 | start = get_timer(0); |
| 299 | if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) { |
| 300 | writel(*data++, &i2s_reg->txd); |
| 301 | data_size--; |
| 302 | } else { |
| 303 | if (get_timer(start) > TIMEOUT_I2S_TX) { |
| 304 | i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| 305 | debug("%s: I2S Transfer Timeout\n", __func__); |
| 306 | return -1; |
| 307 | } |
| 308 | } |
| 309 | } |
| 310 | i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| 311 | |
| 312 | return 0; |
| 313 | } |
| 314 | |
| 315 | int i2s_tx_init(struct i2stx_info *pi2s_tx) |
| 316 | { |
| 317 | int ret; |
| 318 | struct i2s_reg *i2s_reg = |
| 319 | (struct i2s_reg *)pi2s_tx->base_address; |
| 320 | |
| 321 | /* Initialize GPIO for I2s */ |
| 322 | exynos_pinmux_config(PERIPH_ID_I2S1, 0); |
| 323 | |
| 324 | /* Set EPLL Clock */ |
| 325 | ret = set_epll_clk(pi2s_tx->audio_pll_clk); |
| 326 | if (ret != 0) { |
| 327 | debug("%s: epll clock set rate falied\n", __func__); |
| 328 | return -1; |
| 329 | } |
| 330 | |
| 331 | /* Select Clk Source for Audio1 */ |
| 332 | set_i2s_clk_source(); |
| 333 | |
| 334 | /* Set Prescaler to get MCLK */ |
| 335 | set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, |
| 336 | (pi2s_tx->samplingrate * (pi2s_tx->rfs))); |
| 337 | |
| 338 | /* Configure I2s format */ |
| 339 | ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| 340 | SND_SOC_DAIFMT_CBM_CFM)); |
| 341 | if (ret == 0) { |
| 342 | i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); |
| 343 | ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); |
| 344 | if (ret != 0) { |
| 345 | debug("%s:set sample rate failed\n", __func__); |
| 346 | return -1; |
| 347 | } |
| 348 | |
| 349 | i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs); |
| 350 | /* disable i2s transfer flag and flush the fifo */ |
| 351 | i2s_txctrl(i2s_reg, I2S_TX_OFF); |
| 352 | i2s_fifo(i2s_reg, FIC_TXFLUSH); |
| 353 | } else { |
| 354 | debug("%s: failed\n", __func__); |
| 355 | } |
| 356 | |
| 357 | return ret; |
| 358 | } |