blob: b2b82c75954839bd90c36c02583e4bc0fac8e47b [file] [log] [blame]
Stefan Roese887e2ec2006-09-07 11:51:23 +02001/*
2 * (C) Copyright 2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * (C) Copyright 2006
6 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
Wolfgang Denk511d0c72006-10-09 00:42:01 +02007 * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
Stefan Roese887e2ec2006-09-07 11:51:23 +02008 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25#include <common.h>
26#include <asm/processor.h>
27#include <ppc440.h>
28#include "sequoia.h"
29
30DECLARE_GLOBAL_DATA_PTR;
31
32extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
33
Stefan Roese1b3c3602006-12-22 14:29:40 +010034ulong flash_get_size (ulong base, int banknum);
35
Stefan Roese887e2ec2006-09-07 11:51:23 +020036int board_early_init_f(void)
37{
Stefan Roesea78bc442007-01-05 10:40:36 +010038 u32 sdr0_cust0;
39 u32 sdr0_pfc1, sdr0_pfc2;
40 u32 reg;
Stefan Roese887e2ec2006-09-07 11:51:23 +020041
42 mtdcr(ebccfga, xbcfg);
43 mtdcr(ebccfgd, 0xb8400000);
44
45 /*--------------------------------------------------------------------
46 * Setup the GPIO pins
47 *-------------------------------------------------------------------*/
48 /* test-only: take GPIO init from pcs440ep ???? in config file */
49 out32(GPIO0_OR, 0x00000000);
50 out32(GPIO0_TCR, 0x0000000f);
51 out32(GPIO0_OSRL, 0x50015400);
52 out32(GPIO0_OSRH, 0x550050aa);
53 out32(GPIO0_TSRL, 0x50015400);
54 out32(GPIO0_TSRH, 0x55005000);
55 out32(GPIO0_ISR1L, 0x50000000);
56 out32(GPIO0_ISR1H, 0x00000000);
57 out32(GPIO0_ISR2L, 0x00000000);
58 out32(GPIO0_ISR2H, 0x00000100);
59 out32(GPIO0_ISR3L, 0x00000000);
60 out32(GPIO0_ISR3H, 0x00000000);
61
62 out32(GPIO1_OR, 0x00000000);
63 out32(GPIO1_TCR, 0xc2000000);
64 out32(GPIO1_OSRL, 0x5c280000);
65 out32(GPIO1_OSRH, 0x00000000);
66 out32(GPIO1_TSRL, 0x0c000000);
67 out32(GPIO1_TSRH, 0x00000000);
68 out32(GPIO1_ISR1L, 0x00005550);
69 out32(GPIO1_ISR1H, 0x00000000);
70 out32(GPIO1_ISR2L, 0x00050000);
71 out32(GPIO1_ISR2H, 0x00000000);
72 out32(GPIO1_ISR3L, 0x01400000);
73 out32(GPIO1_ISR3H, 0x00000000);
74
75 /*--------------------------------------------------------------------
76 * Setup the interrupt controller polarities, triggers, etc.
77 *-------------------------------------------------------------------*/
78 mtdcr(uic0sr, 0xffffffff); /* clear all */
79 mtdcr(uic0er, 0x00000000); /* disable all */
80 mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
81 mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
82 mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
83 mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
84 mtdcr(uic0sr, 0xffffffff); /* clear all */
85
86 mtdcr(uic1sr, 0xffffffff); /* clear all */
87 mtdcr(uic1er, 0x00000000); /* disable all */
88 mtdcr(uic1cr, 0x00000000); /* all non-critical */
89 mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
90 mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
91 mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
92 mtdcr(uic1sr, 0xffffffff); /* clear all */
93
94 mtdcr(uic2sr, 0xffffffff); /* clear all */
95 mtdcr(uic2er, 0x00000000); /* disable all */
96 mtdcr(uic2cr, 0x00000000); /* all non-critical */
97 mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
98 mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
99 mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
100 mtdcr(uic2sr, 0xffffffff); /* clear all */
101
102 /* 50MHz tmrclk */
103 *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
104
105 /* clear write protects */
106 *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
107
108 /* enable Ethernet */
109 *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
110
111 /* enable USB device */
112 *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
113
114 /* select Ethernet pins */
115 mfsdr(SDR0_PFC1, sdr0_pfc1);
116 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
117 mfsdr(SDR0_PFC2, sdr0_pfc2);
118 sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
119 mtsdr(SDR0_PFC2, sdr0_pfc2);
120 mtsdr(SDR0_PFC1, sdr0_pfc1);
121
122 /* PCI arbiter enabled */
123 mfsdr(sdr_pci0, reg);
124 mtsdr(sdr_pci0, 0x80000000 | reg);
125
126 /* setup NAND FLASH */
127 mfsdr(SDR0_CUST0, sdr0_cust0);
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200128 sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
Stefan Roese887e2ec2006-09-07 11:51:23 +0200129 SDR0_CUST0_NDFC_ENABLE |
130 SDR0_CUST0_NDFC_BW_8_BIT |
131 SDR0_CUST0_NDFC_ARE_MASK |
132 (0x80000000 >> (28 + CFG_NAND_CS));
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200133 mtsdr(SDR0_CUST0, sdr0_cust0);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200134
135 return 0;
136}
137
138/*---------------------------------------------------------------------------+
139 | misc_init_r.
140 +---------------------------------------------------------------------------*/
141int misc_init_r(void)
142{
143 uint pbcr;
144 int size_val = 0;
Stefan Roesea78bc442007-01-05 10:40:36 +0100145 u32 reg;
Stefan Roese854bc8d2006-09-13 13:51:58 +0200146#ifdef CONFIG_440EPX
Stefan Roese887e2ec2006-09-07 11:51:23 +0200147 unsigned long usb2d0cr = 0;
148 unsigned long usb2phy0cr, usb2h0cr = 0;
149 unsigned long sdr0_pfc1;
150 char *act = getenv("usbact");
Stefan Roese854bc8d2006-09-13 13:51:58 +0200151#endif
Stefan Roese887e2ec2006-09-07 11:51:23 +0200152
153 /*
154 * FLASH stuff...
155 */
156
157 /* Re-do sizing to get full correct info */
Stefan Roese1b3c3602006-12-22 14:29:40 +0100158
159 /* adjust flash start and offset */
160 gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
161 gd->bd->bi_flashoffset = 0;
162
Stefan Roese887e2ec2006-09-07 11:51:23 +0200163#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
164 mtdcr(ebccfga, pb3cr);
165#else
166 mtdcr(ebccfga, pb0cr);
167#endif
168 pbcr = mfdcr(ebccfgd);
169 switch (gd->bd->bi_flashsize) {
170 case 1 << 20:
171 size_val = 0;
172 break;
173 case 2 << 20:
174 size_val = 1;
175 break;
176 case 4 << 20:
177 size_val = 2;
178 break;
179 case 8 << 20:
180 size_val = 3;
181 break;
182 case 16 << 20:
183 size_val = 4;
184 break;
185 case 32 << 20:
186 size_val = 5;
187 break;
188 case 64 << 20:
189 size_val = 6;
190 break;
191 case 128 << 20:
192 size_val = 7;
193 break;
194 }
195 pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
196#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
197 mtdcr(ebccfga, pb3cr);
198#else
199 mtdcr(ebccfga, pb0cr);
200#endif
201 mtdcr(ebccfgd, pbcr);
202
Stefan Roese1b3c3602006-12-22 14:29:40 +0100203 /*
204 * Re-check to get correct base address
205 */
206 flash_get_size(gd->bd->bi_flashstart, 0);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200207
208#ifdef CFG_ENV_IS_IN_FLASH
209 /* Monitor protection ON by default */
210 (void)flash_protect(FLAG_PROTECT_SET,
211 -CFG_MONITOR_LEN,
212 0xffffffff,
213 &flash_info[0]);
214
215 /* Env protection ON by default */
216 (void)flash_protect(FLAG_PROTECT_SET,
217 CFG_ENV_ADDR_REDUND,
218 CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
219 &flash_info[0]);
220#endif
221
222 /*
223 * USB suff...
224 */
Stefan Roese854bc8d2006-09-13 13:51:58 +0200225#ifdef CONFIG_440EPX
Stefan Roese887e2ec2006-09-07 11:51:23 +0200226 if (act == NULL || strcmp(act, "hostdev") == 0) {
227 /* SDR Setting */
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200228 mfsdr(SDR0_PFC1, sdr0_pfc1);
229 mfsdr(SDR0_USB0, usb2d0cr);
230 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
231 mfsdr(SDR0_USB2H0CR, usb2h0cr);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200232
233 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
234 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200235 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
236 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200237 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200238 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200239 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200240 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200241 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200242 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200243
244 /* An 8-bit/60MHz interface is the only possible alternative
245 when connecting the Device to the PHY */
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200246 usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
247 usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200248
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200249 /* To enable the USB 2.0 Device function through the UTMI interface */
250 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
251 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200252
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200253 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
254 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200255
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200256 mtsdr(SDR0_PFC1, sdr0_pfc1);
257 mtsdr(SDR0_USB0, usb2d0cr);
258 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
259 mtsdr(SDR0_USB2H0CR, usb2h0cr);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200260
261 /*clear resets*/
262 udelay (1000);
263 mtsdr(SDR0_SRST1, 0x00000000);
264 udelay (1000);
265 mtsdr(SDR0_SRST0, 0x00000000);
266
267 printf("USB: Host(int phy) Device(ext phy)\n");
268
269 } else if (strcmp(act, "dev") == 0) {
270 /*-------------------PATCH-------------------------------*/
271 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
272
273 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
274 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
275 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200276 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200277 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200278 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200279 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200280 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200281 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
282
283 udelay (1000);
284 mtsdr(SDR0_SRST1, 0x672c6000);
285
286 udelay (1000);
287 mtsdr(SDR0_SRST0, 0x00000080);
288
289 udelay (1000);
290 mtsdr(SDR0_SRST1, 0x60206000);
291
292 *(unsigned int *)(0xe0000350) = 0x00000001;
293
294 udelay (1000);
295 mtsdr(SDR0_SRST1, 0x60306000);
296 /*-------------------PATCH-------------------------------*/
297
298 /* SDR Setting */
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200299 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200300 mfsdr(SDR0_USB2H0CR, usb2h0cr);
301 mfsdr(SDR0_USB0, usb2d0cr);
302 mfsdr(SDR0_PFC1, sdr0_pfc1);
303
304 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
305 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200306 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
Stefan Roese887e2ec2006-09-07 11:51:23 +0200307 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
308 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200309 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200310 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200311 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200312 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200313 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200314
315 usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200316 usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200317
318 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200319 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200320
321 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200322 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
Stefan Roese887e2ec2006-09-07 11:51:23 +0200323
Wolfgang Denk511d0c72006-10-09 00:42:01 +0200324 mtsdr(SDR0_USB2H0CR, usb2h0cr);
325 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
Stefan Roese887e2ec2006-09-07 11:51:23 +0200326 mtsdr(SDR0_USB0, usb2d0cr);
327 mtsdr(SDR0_PFC1, sdr0_pfc1);
328
329 /*clear resets*/
330 udelay (1000);
331 mtsdr(SDR0_SRST1, 0x00000000);
332 udelay (1000);
333 mtsdr(SDR0_SRST0, 0x00000000);
334
335 printf("USB: Device(int phy)\n");
336 }
Stefan Roese854bc8d2006-09-13 13:51:58 +0200337#endif /* CONFIG_440EPX */
Stefan Roese887e2ec2006-09-07 11:51:23 +0200338
Stefan Roesea78bc442007-01-05 10:40:36 +0100339 /*
340 * Clear PLB4A0_ACR[WRP]
341 * This fix will make the MAL burst disabling patch for the Linux
342 * EMAC driver obsolete.
343 */
344 reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
345 mtdcr(plb4_acr, reg);
346
Stefan Roese887e2ec2006-09-07 11:51:23 +0200347 return 0;
348}
349
350int checkboard(void)
351{
352 char *s = getenv("serial#");
Stefan Roesee0b9ea82007-01-13 07:57:51 +0100353 u8 rev;
354 u8 val;
Stefan Roese887e2ec2006-09-07 11:51:23 +0200355
Stefan Roese854bc8d2006-09-13 13:51:58 +0200356#ifdef CONFIG_440EPX
Stefan Roese887e2ec2006-09-07 11:51:23 +0200357 printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
Stefan Roese854bc8d2006-09-13 13:51:58 +0200358#else
359 printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
360#endif
Stefan Roesee0b9ea82007-01-13 07:57:51 +0100361
362 rev = *(u8 *)(CFG_CPLD + 0);
363 val = *(u8 *)(CFG_CPLD + 5) & 0x01;
364 printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
365
Stefan Roese887e2ec2006-09-07 11:51:23 +0200366 if (s != NULL) {
367 puts(", serial# ");
368 puts(s);
369 }
370 putc('\n');
371
372 return (0);
373}
374
375#if defined(CFG_DRAM_TEST)
376int testdram(void)
377{
378 unsigned long *mem = (unsigned long *)0;
379 const unsigned long kend = (1024 / sizeof(unsigned long));
380 unsigned long k, n;
381
382 mtmsr(0);
383
384 for (k = 0; k < CFG_MBYTES_SDRAM;
385 ++k, mem += (1024 / sizeof(unsigned long))) {
386 if ((k & 1023) == 0) {
387 printf("%3d MB\r", k / 1024);
388 }
389
390 memset(mem, 0xaaaaaaaa, 1024);
391 for (n = 0; n < kend; ++n) {
392 if (mem[n] != 0xaaaaaaaa) {
393 printf("SDRAM test fails at: %08x\n",
394 (uint) & mem[n]);
395 return 1;
396 }
397 }
398
399 memset(mem, 0x55555555, 1024);
400 for (n = 0; n < kend; ++n) {
401 if (mem[n] != 0x55555555) {
402 printf("SDRAM test fails at: %08x\n",
403 (uint) & mem[n]);
404 return 1;
405 }
406 }
407 }
408 printf("SDRAM test passes\n");
409 return 0;
410}
411#endif
412
413/*************************************************************************
414 * pci_pre_init
415 *
416 * This routine is called just prior to registering the hose and gives
417 * the board the opportunity to check things. Returning a value of zero
418 * indicates that things are bad & PCI initialization should be aborted.
419 *
420 * Different boards may wish to customize the pci controller structure
421 * (add regions, override default access routines, etc) or perform
422 * certain pre-initialization actions.
423 *
424 ************************************************************************/
425#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
426int pci_pre_init(struct pci_controller *hose)
427{
428 unsigned long addr;
429#if 0
430 /*--------------------------------------------------------------------------+
431 * Cactus is always configured as the host & requires the
432 * PCI arbiter to be enabled ???
433 *--------------------------------------------------------------------------*/
434 unsigned long strap;
435 mfsdr(sdr_sdstp1, strap);
436 if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
437 printf("PCI: SDR0_STRP1[PAE] not set.\n");
438 printf("PCI: Configuration aborted.\n");
439 return 0;
440 }
441#endif
442
443 /*-------------------------------------------------------------------------+
444 | Set priority for all PLB3 devices to 0.
445 | Set PLB3 arbiter to fair mode.
446 +-------------------------------------------------------------------------*/
447 mfsdr(sdr_amp1, addr);
448 mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
449 addr = mfdcr(plb3_acr);
450 mtdcr(plb3_acr, addr | 0x80000000);
451
452 /*-------------------------------------------------------------------------+
453 | Set priority for all PLB4 devices to 0.
454 +-------------------------------------------------------------------------*/
455 mfsdr(sdr_amp0, addr);
456 mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
457 addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
458 mtdcr(plb4_acr, addr);
459
460 /*-------------------------------------------------------------------------+
461 | Set Nebula PLB4 arbiter to fair mode.
462 +-------------------------------------------------------------------------*/
463 /* Segment0 */
464 addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
465 addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
466 addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
467 addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
468 mtdcr(plb0_acr, addr);
469
470 /* Segment1 */
471 addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
472 addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
473 addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
474 addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
475 mtdcr(plb1_acr, addr);
476
477 return 1;
478}
479#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
480
481/*************************************************************************
482 * pci_target_init
483 *
484 * The bootstrap configuration provides default settings for the pci
485 * inbound map (PIM). But the bootstrap config choices are limited and
486 * may not be sufficient for a given board.
487 *
488 ************************************************************************/
489#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
490void pci_target_init(struct pci_controller *hose)
491{
492 /*--------------------------------------------------------------------------+
493 * Set up Direct MMIO registers
494 *--------------------------------------------------------------------------*/
495 /*--------------------------------------------------------------------------+
496 | PowerPC440EPX PCI Master configuration.
497 | Map one 1Gig range of PLB/processor addresses to PCI memory space.
498 | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
499 | Use byte reversed out routines to handle endianess.
500 | Make this region non-prefetchable.
501 +--------------------------------------------------------------------------*/
502 out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
503 out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
504 out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
505 out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
506 out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
507
508 out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
509 out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
510 out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
511 out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
512 out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
513
514 out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
515 out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
516 out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
517 out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
518
519 /*--------------------------------------------------------------------------+
520 * Set up Configuration registers
521 *--------------------------------------------------------------------------*/
522
523 /* Program the board's subsystem id/vendor id */
524 pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
525 CFG_PCI_SUBSYS_VENDORID);
526 pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
527
528 /* Configure command register as bus master */
529 pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
530
531 /* 240nS PCI clock */
532 pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
533
534 /* No error reporting */
535 pci_write_config_word(0, PCI_ERREN, 0);
536
537 pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
538
539}
540#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
541
542/*************************************************************************
543 * pci_master_init
544 *
545 ************************************************************************/
546#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
547void pci_master_init(struct pci_controller *hose)
548{
549 unsigned short temp_short;
550
551 /*--------------------------------------------------------------------------+
552 | Write the PowerPC440 EP PCI Configuration regs.
553 | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
554 | Enable PowerPC440 EP to act as a PCI memory target (PTM).
555 +--------------------------------------------------------------------------*/
556 pci_read_config_word(0, PCI_COMMAND, &temp_short);
557 pci_write_config_word(0, PCI_COMMAND,
558 temp_short | PCI_COMMAND_MASTER |
559 PCI_COMMAND_MEMORY);
560}
561#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
562
563/*************************************************************************
564 * is_pci_host
565 *
566 * This routine is called to determine if a pci scan should be
567 * performed. With various hardware environments (especially cPCI and
568 * PPMC) it's insufficient to depend on the state of the arbiter enable
569 * bit in the strap register, or generic host/adapter assumptions.
570 *
571 * Rather than hard-code a bad assumption in the general 440 code, the
572 * 440 pci code requires the board to decide at runtime.
573 *
574 * Return 0 for adapter mode, non-zero for host (monarch) mode.
575 *
576 *
577 ************************************************************************/
578#if defined(CONFIG_PCI)
579int is_pci_host(struct pci_controller *hose)
580{
581 /* Cactus is always configured as host. */
582 return (1);
583}
584#endif /* defined(CONFIG_PCI) */