blob: 0805b93c4ac953c511d0d40934b5ed0957afcc06 [file] [log] [blame]
Michal Simek18a952c2018-03-27 10:36:39 +02001// SPDX-License-Identifier: GPL-2.0+
Michal Simek6c0c9582016-04-07 16:00:11 +02002/*
3 * dts file for Xilinx ZynqMP zc1751-xm015-dc1
4 *
Michal Simekd31f1c92020-02-18 08:38:06 +01005 * (C) Copyright 2015 - 2020, Xilinx, Inc.
Michal Simek6c0c9582016-04-07 16:00:11 +02006 *
7 * Michal Simek <michal.simek@xilinx.com>
Michal Simek6c0c9582016-04-07 16:00:11 +02008 */
9
10/dts-v1/;
11
12#include "zynqmp.dtsi"
Michal Simekee4983f2017-12-08 14:50:42 +010013#include "zynqmp-clk-ccf.dtsi"
Michal Simek6c0c9582016-04-07 16:00:11 +020014
15/ {
16 model = "ZynqMP zc1751-xm015-dc1 RevA";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
18
19 aliases {
20 ethernet0 = &gem3;
21 gpio0 = &gpio;
22 i2c0 = &i2c1;
23 mmc0 = &sdhci0;
24 mmc1 = &sdhci1;
25 rtc0 = &rtc;
26 serial0 = &uart0;
27 spi0 = &qspi;
28 usb0 = &usb0;
29 };
30
31 chosen {
32 bootargs = "earlycon";
33 stdout-path = "serial0:115200n8";
34 };
35
Michal Simekc926e6f2016-11-11 13:21:04 +010036 memory@0 {
Michal Simek6c0c9582016-04-07 16:00:11 +020037 device_type = "memory";
38 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
39 };
40};
41
Michal Simek6c0c9582016-04-07 16:00:11 +020042&fpd_dma_chan1 {
43 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020044};
45
46&fpd_dma_chan2 {
47 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020048};
49
50&fpd_dma_chan3 {
51 status = "okay";
52};
53
54&fpd_dma_chan4 {
55 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020056};
57
58&fpd_dma_chan5 {
59 status = "okay";
60};
61
62&fpd_dma_chan6 {
63 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020064};
65
66&fpd_dma_chan7 {
67 status = "okay";
68};
69
70&fpd_dma_chan8 {
71 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020072};
73
74&gem3 {
75 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +020076 phy-handle = <&phy0>;
77 phy-mode = "rgmii-id";
Michal Simek2975a422019-08-08 12:44:22 +020078 phy0: ethernet-phy@0 {
Michal Simek6c0c9582016-04-07 16:00:11 +020079 reg = <0>;
80 };
81};
82
83&gpio {
84 status = "okay";
85};
86
87&gpu {
88 status = "okay";
89};
90
91&i2c1 {
92 status = "okay";
93 clock-frequency = <400000>;
Michal Simek43bf4392018-03-27 13:15:17 +020094
95 eeprom: eeprom@55 {
Michal Simek098505f2018-03-27 10:54:25 +020096 compatible = "atmel,24c64"; /* 24AA64 */
Michal Simek6c0c9582016-04-07 16:00:11 +020097 reg = <0x55>;
98 };
99};
100
101&qspi {
102 status = "okay";
103 flash@0 {
Neil Armstrongffd4c7c2019-02-10 10:16:20 +0000104 compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
Michal Simek6c0c9582016-04-07 16:00:11 +0200105 #address-cells = <1>;
106 #size-cells = <1>;
107 reg = <0x0>;
108 spi-tx-bus-width = <1>;
109 spi-rx-bus-width = <4>;
110 spi-max-frequency = <108000000>; /* Based on DC1 spec */
Michal Simek5df63a62020-02-14 14:19:56 +0100111 partition@0 { /* for testing purpose */
Michal Simek6c0c9582016-04-07 16:00:11 +0200112 label = "qspi-fsbl-uboot";
113 reg = <0x0 0x100000>;
114 };
Michal Simek5df63a62020-02-14 14:19:56 +0100115 partition@100000 { /* for testing purpose */
Michal Simek6c0c9582016-04-07 16:00:11 +0200116 label = "qspi-linux";
117 reg = <0x100000 0x500000>;
118 };
Michal Simek5df63a62020-02-14 14:19:56 +0100119 partition@600000 { /* for testing purpose */
Michal Simek6c0c9582016-04-07 16:00:11 +0200120 label = "qspi-device-tree";
121 reg = <0x600000 0x20000>;
122 };
Michal Simek5df63a62020-02-14 14:19:56 +0100123 partition@620000 { /* for testing purpose */
Michal Simek6c0c9582016-04-07 16:00:11 +0200124 label = "qspi-rootfs";
125 reg = <0x620000 0x5E0000>;
126 };
127 };
128};
129
130&rtc {
131 status = "okay";
132};
133
134&sata {
135 status = "okay";
136 /* SATA phy OOB timing settings */
137 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
138 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
139 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
140 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
141 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
142 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
143 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
144 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
145};
146
147/* eMMC */
148&sdhci0 {
149 status = "okay";
150 bus-width = <8>;
Sai Krishna Potthuri0488a5e2016-08-16 14:41:35 +0530151 xlnx,mio_bank = <0>;
Michal Simek6c0c9582016-04-07 16:00:11 +0200152};
153
154/* SD1 with level shifter */
155&sdhci1 {
156 status = "okay";
Manish Narani12ffe752020-02-13 23:37:30 -0700157 /*
158 * This property should be removed for supporting UHS mode
159 */
160 no-1-8-v;
Sai Krishna Potthuri0488a5e2016-08-16 14:41:35 +0530161 xlnx,mio_bank = <1>;
Michal Simek6c0c9582016-04-07 16:00:11 +0200162};
163
164&uart0 {
165 status = "okay";
166};
167
168/* ULPI SMSC USB3320 */
169&usb0 {
170 status = "okay";
Michal Simek8925e592016-04-05 12:01:16 +0200171};
172
173&dwc3_0 {
174 status = "okay";
Michal Simek6c0c9582016-04-07 16:00:11 +0200175 dr_mode = "host";
176};
177
Michal Simek04437de2020-02-18 09:24:08 +0100178&zynqmp_dpsub {
Michal Simek6c0c9582016-04-07 16:00:11 +0200179 status = "okay";
180};
181
Michal Simek04437de2020-02-18 09:24:08 +0100182&zynqmp_dp_snd_pcm0 {
Michal Simek6c0c9582016-04-07 16:00:11 +0200183 status = "okay";
184};
185
Michal Simek04437de2020-02-18 09:24:08 +0100186&zynqmp_dp_snd_pcm1 {
Michal Simek6c0c9582016-04-07 16:00:11 +0200187 status = "okay";
188};
189
Michal Simek04437de2020-02-18 09:24:08 +0100190&zynqmp_dp_snd_card0 {
Michal Simek6c0c9582016-04-07 16:00:11 +0200191 status = "okay";
192};
193
Michal Simek04437de2020-02-18 09:24:08 +0100194&zynqmp_dp_snd_codec0 {
Michal Simek6c0c9582016-04-07 16:00:11 +0200195 status = "okay";
196};
197
198&xlnx_dpdma {
199 status = "okay";
200};