blob: 680e32f3ea6f46fa687ef2fd247af90fd4eae26f [file] [log] [blame]
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +02001/*
2 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
3 * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#include <common.h>
9#include <dm.h>
10#include <dm/device.h>
11#include <generic-phy.h>
12#include <asm/io.h>
13#include <asm/arch/sys_proto.h>
14#include <syscon.h>
15#include <regmap.h>
16
17/* PLLCTRL Registers */
18#define PLL_STATUS 0x00000004
19#define PLL_GO 0x00000008
20#define PLL_CONFIGURATION1 0x0000000C
21#define PLL_CONFIGURATION2 0x00000010
22#define PLL_CONFIGURATION3 0x00000014
23#define PLL_CONFIGURATION4 0x00000020
24
25#define PLL_REGM_MASK 0x001FFE00
26#define PLL_REGM_SHIFT 9
27#define PLL_REGM_F_MASK 0x0003FFFF
28#define PLL_REGM_F_SHIFT 0
29#define PLL_REGN_MASK 0x000001FE
30#define PLL_REGN_SHIFT 1
31#define PLL_SELFREQDCO_MASK 0x0000000E
32#define PLL_SELFREQDCO_SHIFT 1
33#define PLL_SD_MASK 0x0003FC00
34#define PLL_SD_SHIFT 10
35#define SET_PLL_GO 0x1
36#define PLL_TICOPWDN BIT(16)
37#define PLL_LDOPWDN BIT(15)
38#define PLL_LOCK 0x2
39#define PLL_IDLE 0x1
40
41/* Software rest for the SATA PLL (in CTRL_CORE_SMA_SW_0 register)*/
42#define SATA_PLL_SOFT_RESET (1<<18)
43
44/* PHY POWER CONTROL Register */
45#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
46#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
47
48#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
49#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
50
51#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
52#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
53
54
55#define PLL_IDLE_TIME 100 /* in milliseconds */
56#define PLL_LOCK_TIME 100 /* in milliseconds */
57
58struct omap_pipe3 {
59 void __iomem *pll_ctrl_base;
60 void __iomem *power_reg;
61 void __iomem *pll_reset_reg;
62 struct pipe3_dpll_map *dpll_map;
63};
64
65
66struct pipe3_dpll_params {
67 u16 m;
68 u8 n;
69 u8 freq:3;
70 u8 sd;
71 u32 mf;
72};
73
74struct pipe3_dpll_map {
75 unsigned long rate;
76 struct pipe3_dpll_params params;
77};
78
79static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
80{
81 return readl(addr + offset);
82}
83
84static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
85 u32 data)
86{
87 writel(data, addr + offset);
88}
89
90static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
91 *pipe3)
92{
93 u32 rate;
94 struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
95
96 rate = get_sys_clk_freq();
97
98 for (; dpll_map->rate; dpll_map++) {
99 if (rate == dpll_map->rate)
100 return &dpll_map->params;
101 }
102
103 printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
104 __func__, rate);
105 return NULL;
106}
107
108static int omap_pipe3_wait_lock(struct omap_pipe3 *pipe3)
109{
110 u32 val;
111 int timeout = PLL_LOCK_TIME;
112
113 do {
114 mdelay(1);
115 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
116 if (val & PLL_LOCK)
117 break;
118 } while (--timeout);
119
120 if (!(val & PLL_LOCK)) {
121 printf("%s: DPLL failed to lock\n", __func__);
122 return -EBUSY;
123 }
124
125 return 0;
126}
127
128static int omap_pipe3_dpll_program(struct omap_pipe3 *pipe3)
129{
130 u32 val;
131 struct pipe3_dpll_params *dpll_params;
132
133 dpll_params = omap_pipe3_get_dpll_params(pipe3);
134 if (!dpll_params) {
135 printf("%s: Invalid DPLL parameters\n", __func__);
136 return -EINVAL;
137 }
138
139 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1);
140 val &= ~PLL_REGN_MASK;
141 val |= dpll_params->n << PLL_REGN_SHIFT;
142 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val);
143
144 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2);
145 val &= ~PLL_SELFREQDCO_MASK;
146 val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
147 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val);
148
149 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1);
150 val &= ~PLL_REGM_MASK;
151 val |= dpll_params->m << PLL_REGM_SHIFT;
152 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val);
153
154 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION4);
155 val &= ~PLL_REGM_F_MASK;
156 val |= dpll_params->mf << PLL_REGM_F_SHIFT;
157 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION4, val);
158
159 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION3);
160 val &= ~PLL_SD_MASK;
161 val |= dpll_params->sd << PLL_SD_SHIFT;
162 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION3, val);
163
164 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_GO, SET_PLL_GO);
165
166 return omap_pipe3_wait_lock(pipe3);
167}
168
169static void omap_control_pipe3_power(struct omap_pipe3 *pipe3, int on)
170{
171 u32 val, rate;
172
173 val = readl(pipe3->power_reg);
174
175 rate = get_sys_clk_freq();
176 rate = rate/1000000;
177
178 if (on) {
179 val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
180 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
181 val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
182 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
183 val |= rate <<
184 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
185 } else {
186 val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
187 val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
188 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
189 }
190
191 writel(val, pipe3->power_reg);
192}
193
194static int pipe3_init(struct phy *phy)
195{
196 int ret;
197 u32 val;
198 struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
199
200 /* Program the DPLL only if not locked */
201 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
202 if (!(val & PLL_LOCK)) {
203 ret = omap_pipe3_dpll_program(pipe3);
204 if (ret)
205 return ret;
206 } else {
207 /* else just bring it out of IDLE mode */
208 val = omap_pipe3_readl(pipe3->pll_ctrl_base,
209 PLL_CONFIGURATION2);
210 if (val & PLL_IDLE) {
211 val &= ~PLL_IDLE;
212 omap_pipe3_writel(pipe3->pll_ctrl_base,
213 PLL_CONFIGURATION2, val);
214 ret = omap_pipe3_wait_lock(pipe3);
215 if (ret)
216 return ret;
217 }
218 }
219 return 0;
220}
221
222static int pipe3_power_on(struct phy *phy)
223{
224 struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
225
226 /* Power up the PHY */
227 omap_control_pipe3_power(pipe3, 1);
228
229 return 0;
230}
231
232static int pipe3_power_off(struct phy *phy)
233{
234 struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
235
236 /* Power down the PHY */
237 omap_control_pipe3_power(pipe3, 0);
238
239 return 0;
240}
241
242static int pipe3_exit(struct phy *phy)
243{
244 u32 val;
245 int timeout = PLL_IDLE_TIME;
246 struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
247
248 pipe3_power_off(phy);
249
250 /* Put DPLL in IDLE mode */
251 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2);
252 val |= PLL_IDLE;
253 omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val);
254
255 /* wait for LDO and Oscillator to power down */
256 do {
257 mdelay(1);
258 val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
259 if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
260 break;
261 } while (--timeout);
262
263 if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
264 error("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
265 __func__, val);
266 return -EBUSY;
267 }
268
269 val = readl(pipe3->pll_reset_reg);
270 writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
271 mdelay(1);
272 writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
273 return 0;
274}
275
276static void *get_reg(struct udevice *dev, const char *name)
277{
278 struct udevice *syscon;
279 struct regmap *regmap;
280 const fdt32_t *cell;
281 int len, err;
282 void *base;
283
284 err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
285 name, &syscon);
286 if (err) {
287 error("unable to find syscon device for %s (%d)\n",
288 name, err);
289 return NULL;
290 }
291
292 regmap = syscon_get_regmap(syscon);
293 if (IS_ERR(regmap)) {
294 error("unable to find regmap for %s (%ld)\n",
295 name, PTR_ERR(regmap));
296 return NULL;
297 }
298
Simon Glassda409cc2017-05-17 17:18:09 -0600299 cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), name,
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200300 &len);
301 if (len < 2*sizeof(fdt32_t)) {
302 error("offset not available for %s\n", name);
303 return NULL;
304 }
305
306 base = regmap_get_range(regmap, 0);
307 if (!base)
308 return NULL;
309
310 return fdtdec_get_number(cell + 1, 1) + base;
311}
312
313static int pipe3_phy_probe(struct udevice *dev)
314{
315 fdt_addr_t addr;
316 fdt_size_t sz;
317 struct omap_pipe3 *pipe3 = dev_get_priv(dev);
318
Simon Glassa821c4a2017-05-17 17:18:05 -0600319 addr = devfdt_get_addr_size_index(dev, 2, &sz);
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200320 if (addr == FDT_ADDR_T_NONE) {
321 error("missing pll ctrl address\n");
322 return -EINVAL;
323 }
324
325 pipe3->pll_ctrl_base = map_physmem(addr, sz, MAP_NOCACHE);
326 if (!pipe3->pll_ctrl_base) {
327 error("unable to remap pll ctrl\n");
328 return -EINVAL;
329 }
330
331 pipe3->power_reg = get_reg(dev, "syscon-phy-power");
332 if (!pipe3->power_reg)
333 return -EINVAL;
334
335 pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
336 if (!pipe3->pll_reset_reg)
337 return -EINVAL;
338
339 pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
340
341 return 0;
342}
343
344static struct pipe3_dpll_map dpll_map_sata[] = {
345 {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
346 {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
347 {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
348 {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
349 {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
350 {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
351 { }, /* Terminator */
352};
353
354static const struct udevice_id pipe3_phy_ids[] = {
355 { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata },
356 { }
357};
358
359static struct phy_ops pipe3_phy_ops = {
360 .init = pipe3_init,
361 .power_on = pipe3_power_on,
362 .power_off = pipe3_power_off,
363 .exit = pipe3_exit,
364};
365
366U_BOOT_DRIVER(pipe3_phy) = {
367 .name = "pipe3_phy",
368 .id = UCLASS_PHY,
369 .of_match = pipe3_phy_ids,
370 .ops = &pipe3_phy_ops,
371 .probe = pipe3_phy_probe,
372 .priv_auto_alloc_size = sizeof(struct omap_pipe3),
373};