blob: 3a8a03f507ab9d8087ffce8420128cfd8bac650d [file] [log] [blame]
wdenk2262cfe2002-11-18 00:14:45 +00001/*
2 * (C) Copyright 2002
3 * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/* now setup the General purpose bus to give us access to the LEDs.
25 * We can then use the leds to display status information.
wdenk8bde7f72003-06-27 21:31:46 +000026 */
wdenk2262cfe2002-11-18 00:14:45 +000027
28sc520_cdp_registers:
29/* size offset value */
30.word 1 ; .word 0x040 ; .long 0x00 /* SDRAM buffer control */
31.word 2 ; .word 0xc08 ; .long 0x0001 /* GP CS offset */
32.word 2 ; .word 0xc09 ; .long 0x0003 /* GP CS width */
33.word 2 ; .word 0xc0a ; .long 0x0001 /* GP CS width */
34.word 2 ; .word 0xc0b ; .long 0x0003 /* GP RD pulse width */
35.word 2 ; .word 0xc0c ; .long 0x0001 /* GP RD offse */
36.word 2 ; .word 0xc0d ; .long 0x0003 /* GP WR pulse width */
37.word 2 ; .word 0xc0e ; .long 0x0001 /* GP WR offset */
38.word 2 ; .word 0xc2c ; .long 0x0000 /* GPIO directionreg */
39.word 2 ; .word 0xc2a ; .long 0x0000 /* GPIO directionreg */
40.word 2 ; .word 0xc22 ; .long 0xffff /* GPIO pin function 31-16 reg */
41.word 2 ; .word 0xc20 ; .long 0xffff /* GPIO pin function 15-0 reg */
42.word 2 ; .word 0x0c4 ; .long 0x28000680 /* PAR 15 for access to led 680 */
43.word 0 ; .word 0x000 ; .long 0x00
44
45/* board early intialization */
46.globl early_board_init
47early_board_init:
wdenk8bde7f72003-06-27 21:31:46 +000048 movl $sc520_cdp_registers,%esi
49init_loop:
50 movl $0xfffef000,%edi /* MMCR base to edi */
wdenk2262cfe2002-11-18 00:14:45 +000051 movw (%esi), %bx /* load sizer to bx */
52 cmpw $0, %bx /* if sie is 0 we're done */
wdenk8bde7f72003-06-27 21:31:46 +000053 je done
wdenk2262cfe2002-11-18 00:14:45 +000054 xorl %edx,%edx
55 movw 2(%esi), %dx /* load MMCR offset to dx */
56 addl %edx, %edi /* add offset to base in edi */
57 movl 4(%esi), %eax /* load value in eax */
58 cmpw $1, %bx
59 je byte /* byte op? */
60 cmpw $2, %bx
61 je word /* word op? */
62 movl %eax, (%edi) /* must be long, then */
63 jmp next
wdenk8bde7f72003-06-27 21:31:46 +000064byte: movb %al,(%edi)
wdenk2262cfe2002-11-18 00:14:45 +000065 jmp next
66word: movw %ax,(%edi)
67next: addl $8, %esi /* advance esi */
68 jmp init_loop
69
70 /* the leds ad 0x80 and 0x680 should now work */
71done: movb $0x88, %al
72 out %al, $0x80
73 movw $0x680, %dx
74 out %al, %dx
75
Wolfgang Denk53677ef2008-05-20 16:00:29 +020076 jmp *%ebp /* return to caller */
wdenk2262cfe2002-11-18 00:14:45 +000077
78
Graeme Russa369f4a2008-09-29 23:03:14 +100079.globl show_boot_progress_asm
80show_boot_progress_asm:
wdenk2262cfe2002-11-18 00:14:45 +000081 out %al, $0x80
82 xchg %al, %ah
83 movw $0x680, %dx
84 out %al, %dx
85 jmp *%ebp