Marek Vasut | 3ebb919 | 2019-07-29 19:59:44 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Device Tree Source for the Condor board |
| 4 | * |
| 5 | * Copyright (C) 2018 Renesas Electronics Corp. |
| 6 | * Copyright (C) 2018 Cogent Embedded, Inc. |
| 7 | */ |
| 8 | |
| 9 | /dts-v1/; |
| 10 | #include "r8a77980.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Renesas Condor board based on r8a77980"; |
| 14 | compatible = "renesas,condor", "renesas,r8a77980"; |
| 15 | |
| 16 | aliases { |
| 17 | serial0 = &scif0; |
| 18 | ethernet0 = &gether; |
| 19 | }; |
| 20 | |
| 21 | chosen { |
| 22 | stdout-path = "serial0:115200n8"; |
| 23 | }; |
| 24 | |
Marek Vasut | c7d6812 | 2020-04-04 16:12:48 +0200 | [diff] [blame^] | 25 | d1_8v: regulator-2 { |
| 26 | compatible = "regulator-fixed"; |
| 27 | regulator-name = "D1.8V"; |
| 28 | regulator-min-microvolt = <1800000>; |
| 29 | regulator-max-microvolt = <1800000>; |
| 30 | regulator-boot-on; |
| 31 | regulator-always-on; |
Marek Vasut | 3ebb919 | 2019-07-29 19:59:44 +0200 | [diff] [blame] | 32 | }; |
| 33 | |
| 34 | d3_3v: regulator-0 { |
| 35 | compatible = "regulator-fixed"; |
| 36 | regulator-name = "D3.3V"; |
| 37 | regulator-min-microvolt = <3300000>; |
| 38 | regulator-max-microvolt = <3300000>; |
| 39 | regulator-boot-on; |
| 40 | regulator-always-on; |
| 41 | }; |
| 42 | |
Marek Vasut | 3ebb919 | 2019-07-29 19:59:44 +0200 | [diff] [blame] | 43 | hdmi-out { |
| 44 | compatible = "hdmi-connector"; |
| 45 | type = "a"; |
| 46 | |
| 47 | port { |
| 48 | hdmi_con: endpoint { |
| 49 | remote-endpoint = <&adv7511_out>; |
| 50 | }; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | lvds-decoder { |
| 55 | compatible = "thine,thc63lvd1024"; |
| 56 | vcc-supply = <&d3_3v>; |
| 57 | |
| 58 | ports { |
| 59 | #address-cells = <1>; |
| 60 | #size-cells = <0>; |
| 61 | |
| 62 | port@0 { |
| 63 | reg = <0>; |
| 64 | thc63lvd1024_in: endpoint { |
| 65 | remote-endpoint = <&lvds0_out>; |
| 66 | }; |
| 67 | }; |
| 68 | |
| 69 | port@2 { |
| 70 | reg = <2>; |
| 71 | thc63lvd1024_out: endpoint { |
| 72 | remote-endpoint = <&adv7511_in>; |
| 73 | }; |
| 74 | }; |
| 75 | }; |
| 76 | }; |
| 77 | |
Marek Vasut | c7d6812 | 2020-04-04 16:12:48 +0200 | [diff] [blame^] | 78 | memory@48000000 { |
| 79 | device_type = "memory"; |
| 80 | /* first 128MB is reserved for secure area. */ |
| 81 | reg = <0 0x48000000 0 0x78000000>; |
| 82 | }; |
| 83 | |
| 84 | vddq_vin01: regulator-1 { |
| 85 | compatible = "regulator-fixed"; |
| 86 | regulator-name = "VDDQ_VIN01"; |
| 87 | regulator-min-microvolt = <1800000>; |
| 88 | regulator-max-microvolt = <1800000>; |
| 89 | regulator-boot-on; |
| 90 | regulator-always-on; |
| 91 | }; |
| 92 | |
Marek Vasut | 3ebb919 | 2019-07-29 19:59:44 +0200 | [diff] [blame] | 93 | x1_clk: x1-clock { |
| 94 | compatible = "fixed-clock"; |
| 95 | #clock-cells = <0>; |
| 96 | clock-frequency = <148500000>; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | &canfd { |
| 101 | pinctrl-0 = <&canfd0_pins>; |
| 102 | pinctrl-names = "default"; |
| 103 | status = "okay"; |
| 104 | |
| 105 | channel0 { |
| 106 | status = "okay"; |
| 107 | }; |
| 108 | }; |
| 109 | |
| 110 | &du { |
| 111 | clocks = <&cpg CPG_MOD 724>, |
| 112 | <&x1_clk>; |
| 113 | clock-names = "du.0", "dclkin.0"; |
| 114 | status = "okay"; |
| 115 | }; |
| 116 | |
| 117 | &extal_clk { |
| 118 | clock-frequency = <16666666>; |
| 119 | }; |
| 120 | |
| 121 | &extalr_clk { |
| 122 | clock-frequency = <32768>; |
| 123 | }; |
| 124 | |
| 125 | &gether { |
| 126 | pinctrl-0 = <&gether_pins>; |
| 127 | pinctrl-names = "default"; |
| 128 | |
| 129 | phy-mode = "rgmii-id"; |
| 130 | phy-handle = <&phy0>; |
| 131 | renesas,no-ether-link; |
| 132 | status = "okay"; |
| 133 | |
| 134 | phy0: ethernet-phy@0 { |
| 135 | rxc-skew-ps = <1500>; |
| 136 | reg = <0>; |
| 137 | interrupt-parent = <&gpio4>; |
| 138 | interrupts = <23 IRQ_TYPE_LEVEL_LOW>; |
| 139 | }; |
| 140 | }; |
| 141 | |
| 142 | &i2c0 { |
| 143 | pinctrl-0 = <&i2c0_pins>; |
| 144 | pinctrl-names = "default"; |
| 145 | |
| 146 | status = "okay"; |
| 147 | clock-frequency = <400000>; |
| 148 | |
| 149 | io_expander0: gpio@20 { |
| 150 | compatible = "onnn,pca9654"; |
| 151 | reg = <0x20>; |
| 152 | gpio-controller; |
| 153 | #gpio-cells = <2>; |
| 154 | }; |
| 155 | |
| 156 | io_expander1: gpio@21 { |
| 157 | compatible = "onnn,pca9654"; |
| 158 | reg = <0x21>; |
| 159 | gpio-controller; |
| 160 | #gpio-cells = <2>; |
| 161 | }; |
| 162 | |
| 163 | hdmi@39 { |
| 164 | compatible = "adi,adv7511w"; |
| 165 | reg = <0x39>; |
| 166 | interrupt-parent = <&gpio1>; |
| 167 | interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| 168 | avdd-supply = <&d1_8v>; |
| 169 | dvdd-supply = <&d1_8v>; |
| 170 | pvdd-supply = <&d1_8v>; |
| 171 | bgvdd-supply = <&d1_8v>; |
| 172 | dvdd-3v-supply = <&d3_3v>; |
| 173 | |
| 174 | adi,input-depth = <8>; |
| 175 | adi,input-colorspace = "rgb"; |
| 176 | adi,input-clock = "1x"; |
| 177 | adi,input-style = <1>; |
| 178 | adi,input-justification = "evenly"; |
| 179 | |
| 180 | ports { |
| 181 | #address-cells = <1>; |
| 182 | #size-cells = <0>; |
| 183 | |
| 184 | port@0 { |
| 185 | reg = <0>; |
| 186 | adv7511_in: endpoint { |
| 187 | remote-endpoint = <&thc63lvd1024_out>; |
| 188 | }; |
| 189 | }; |
| 190 | |
| 191 | port@1 { |
| 192 | reg = <1>; |
| 193 | adv7511_out: endpoint { |
| 194 | remote-endpoint = <&hdmi_con>; |
| 195 | }; |
| 196 | }; |
| 197 | }; |
| 198 | }; |
| 199 | }; |
| 200 | |
| 201 | &lvds0 { |
| 202 | status = "okay"; |
| 203 | |
| 204 | ports { |
| 205 | port@1 { |
| 206 | lvds0_out: endpoint { |
| 207 | remote-endpoint = <&thc63lvd1024_in>; |
| 208 | }; |
| 209 | }; |
| 210 | }; |
| 211 | }; |
| 212 | |
| 213 | &mmc0 { |
| 214 | pinctrl-0 = <&mmc_pins>; |
| 215 | pinctrl-1 = <&mmc_pins_uhs>; |
| 216 | pinctrl-names = "default", "state_uhs"; |
| 217 | |
| 218 | vmmc-supply = <&d3_3v>; |
| 219 | vqmmc-supply = <&vddq_vin01>; |
| 220 | mmc-hs200-1_8v; |
| 221 | bus-width = <8>; |
| 222 | non-removable; |
| 223 | status = "okay"; |
| 224 | }; |
| 225 | |
| 226 | &pciec { |
| 227 | status = "okay"; |
| 228 | }; |
| 229 | |
| 230 | &pcie_bus_clk { |
| 231 | clock-frequency = <100000000>; |
| 232 | }; |
| 233 | |
| 234 | &pcie_phy { |
| 235 | status = "okay"; |
| 236 | }; |
| 237 | |
| 238 | &pfc { |
| 239 | canfd0_pins: canfd0 { |
| 240 | groups = "canfd0_data_a"; |
| 241 | function = "canfd0"; |
| 242 | }; |
| 243 | |
| 244 | gether_pins: gether { |
| 245 | groups = "gether_mdio_a", "gether_rgmii", |
| 246 | "gether_txcrefclk", "gether_txcrefclk_mega"; |
| 247 | function = "gether"; |
| 248 | }; |
| 249 | |
| 250 | i2c0_pins: i2c0 { |
| 251 | groups = "i2c0"; |
| 252 | function = "i2c0"; |
| 253 | }; |
| 254 | |
| 255 | mmc_pins: mmc { |
| 256 | groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; |
| 257 | function = "mmc"; |
| 258 | power-source = <3300>; |
| 259 | }; |
| 260 | |
| 261 | mmc_pins_uhs: mmc_uhs { |
| 262 | groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; |
| 263 | function = "mmc"; |
| 264 | power-source = <1800>; |
| 265 | }; |
| 266 | |
| 267 | scif0_pins: scif0 { |
| 268 | groups = "scif0_data"; |
| 269 | function = "scif0"; |
| 270 | }; |
| 271 | |
| 272 | scif_clk_pins: scif_clk { |
| 273 | groups = "scif_clk_b"; |
| 274 | function = "scif_clk"; |
| 275 | }; |
| 276 | }; |
| 277 | |
| 278 | &rwdt { |
| 279 | timeout-sec = <60>; |
| 280 | status = "okay"; |
| 281 | }; |
| 282 | |
| 283 | &scif0 { |
| 284 | pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; |
| 285 | pinctrl-names = "default"; |
| 286 | |
| 287 | status = "okay"; |
| 288 | }; |
| 289 | |
| 290 | &scif_clk { |
| 291 | clock-frequency = <14745600>; |
| 292 | }; |