Wenyou Yang | 2c62c56 | 2015-11-04 14:25:13 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Atmel PIO4 device driver |
| 3 | * |
| 4 | * Copyright (C) 2015 Atmel Corporation |
| 5 | * Wenyou.Yang <wenyou.yang@atmel.com> |
| 6 | * |
| 7 | * SPDX-License-Identifier: GPL-2.0+ |
| 8 | */ |
| 9 | #include <common.h> |
| 10 | #include <dm.h> |
| 11 | #include <asm/arch/hardware.h> |
| 12 | #include <mach/gpio.h> |
| 13 | #include <mach/atmel_pio4.h> |
| 14 | |
| 15 | #define ATMEL_PIO4_PINS_PER_BANK 32 |
| 16 | |
| 17 | /* |
| 18 | * Register Field Definitions |
| 19 | */ |
| 20 | #define ATMEL_PIO4_CFGR_FUNC (0x7 << 0) |
| 21 | #define ATMEL_PIO4_CFGR_FUNC_GPIO (0x0 << 0) |
| 22 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_A (0x1 << 0) |
| 23 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_B (0x2 << 0) |
| 24 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_C (0x3 << 0) |
| 25 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_D (0x4 << 0) |
| 26 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_E (0x5 << 0) |
| 27 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_F (0x6 << 0) |
| 28 | #define ATMEL_PIO4_CFGR_FUNC_PERIPH_G (0x7 << 0) |
| 29 | #define ATMEL_PIO4_CFGR_DIR (0x1 << 8) |
| 30 | #define ATMEL_PIO4_CFGR_PUEN (0x1 << 9) |
| 31 | #define ATMEL_PIO4_CFGR_PDEN (0x1 << 10) |
| 32 | #define ATMEL_PIO4_CFGR_IFEN (0x1 << 12) |
| 33 | #define ATMEL_PIO4_CFGR_IFSCEN (0x1 << 13) |
| 34 | #define ATMEL_PIO4_CFGR_OPD (0x1 << 14) |
| 35 | #define ATMEL_PIO4_CFGR_SCHMITT (0x1 << 15) |
| 36 | #define ATMEL_PIO4_CFGR_DRVSTR (0x3 << 16) |
| 37 | #define ATMEL_PIO4_CFGR_DRVSTR_LOW0 (0x0 << 16) |
| 38 | #define ATMEL_PIO4_CFGR_DRVSTR_LOW1 (0x1 << 16) |
| 39 | #define ATMEL_PIO4_CFGR_DRVSTR_MEDIUM (0x2 << 16) |
| 40 | #define ATMEL_PIO4_CFGR_DRVSTR_HIGH (0x3 << 16) |
| 41 | #define ATMEL_PIO4_CFGR_EVTSEL (0x7 << 24) |
| 42 | #define ATMEL_PIO4_CFGR_EVTSEL_FALLING (0x0 << 24) |
| 43 | #define ATMEL_PIO4_CFGR_EVTSEL_RISING (0x1 << 24) |
| 44 | #define ATMEL_PIO4_CFGR_EVTSEL_BOTH (0x2 << 24) |
| 45 | #define ATMEL_PIO4_CFGR_EVTSEL_LOW (0x3 << 24) |
| 46 | #define ATMEL_PIO4_CFGR_EVTSEL_HIGH (0x4 << 24) |
| 47 | #define ATMEL_PIO4_CFGR_PCFS (0x1 << 29) |
| 48 | #define ATMEL_PIO4_CFGR_ICFS (0x1 << 30) |
| 49 | |
| 50 | static struct atmel_pio4_port *atmel_pio4_port_base(u32 port) |
| 51 | { |
| 52 | struct atmel_pio4_port *base = NULL; |
| 53 | |
| 54 | switch (port) { |
| 55 | case AT91_PIO_PORTA: |
| 56 | base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA; |
| 57 | break; |
| 58 | case AT91_PIO_PORTB: |
| 59 | base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB; |
| 60 | break; |
| 61 | case AT91_PIO_PORTC: |
| 62 | base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC; |
| 63 | break; |
| 64 | case AT91_PIO_PORTD: |
| 65 | base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD; |
| 66 | break; |
| 67 | default: |
| 68 | printf("Error: Atmel PIO4: Failed to get PIO base of port#%d!\n", |
| 69 | port); |
| 70 | break; |
| 71 | } |
| 72 | |
| 73 | return base; |
| 74 | } |
| 75 | |
| 76 | static int atmel_pio4_config_io_func(u32 port, u32 pin, |
| 77 | u32 func, u32 use_pullup) |
| 78 | { |
| 79 | struct atmel_pio4_port *port_base; |
| 80 | u32 reg, mask; |
| 81 | |
| 82 | if (pin >= ATMEL_PIO4_PINS_PER_BANK) |
| 83 | return -ENODEV; |
| 84 | |
| 85 | port_base = atmel_pio4_port_base(port); |
| 86 | if (!port_base) |
| 87 | return -ENODEV; |
| 88 | |
| 89 | mask = 1 << pin; |
| 90 | reg = func; |
| 91 | reg |= use_pullup ? ATMEL_PIO4_CFGR_PUEN : 0; |
| 92 | |
| 93 | writel(mask, &port_base->mskr); |
| 94 | writel(reg, &port_base->cfgr); |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup) |
| 100 | { |
| 101 | return atmel_pio4_config_io_func(port, pin, |
| 102 | ATMEL_PIO4_CFGR_FUNC_GPIO, |
| 103 | use_pullup); |
| 104 | } |
| 105 | |
| 106 | int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup) |
| 107 | { |
| 108 | return atmel_pio4_config_io_func(port, pin, |
| 109 | ATMEL_PIO4_CFGR_FUNC_PERIPH_A, |
| 110 | use_pullup); |
| 111 | } |
| 112 | |
| 113 | int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup) |
| 114 | { |
| 115 | return atmel_pio4_config_io_func(port, pin, |
| 116 | ATMEL_PIO4_CFGR_FUNC_PERIPH_B, |
| 117 | use_pullup); |
| 118 | } |
| 119 | |
| 120 | int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup) |
| 121 | { |
| 122 | return atmel_pio4_config_io_func(port, pin, |
| 123 | ATMEL_PIO4_CFGR_FUNC_PERIPH_C, |
| 124 | use_pullup); |
| 125 | } |
| 126 | |
| 127 | int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup) |
| 128 | { |
| 129 | return atmel_pio4_config_io_func(port, pin, |
| 130 | ATMEL_PIO4_CFGR_FUNC_PERIPH_D, |
| 131 | use_pullup); |
| 132 | } |
| 133 | |
| 134 | int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup) |
| 135 | { |
| 136 | return atmel_pio4_config_io_func(port, pin, |
| 137 | ATMEL_PIO4_CFGR_FUNC_PERIPH_E, |
| 138 | use_pullup); |
| 139 | } |
| 140 | |
| 141 | int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup) |
| 142 | { |
| 143 | return atmel_pio4_config_io_func(port, pin, |
| 144 | ATMEL_PIO4_CFGR_FUNC_PERIPH_F, |
| 145 | use_pullup); |
| 146 | } |
| 147 | |
| 148 | int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup) |
| 149 | { |
| 150 | return atmel_pio4_config_io_func(port, pin, |
| 151 | ATMEL_PIO4_CFGR_FUNC_PERIPH_G, |
| 152 | use_pullup); |
| 153 | } |
| 154 | |
| 155 | int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value) |
| 156 | { |
| 157 | struct atmel_pio4_port *port_base; |
| 158 | u32 reg, mask; |
| 159 | |
| 160 | if (pin >= ATMEL_PIO4_PINS_PER_BANK) |
| 161 | return -ENODEV; |
| 162 | |
| 163 | port_base = atmel_pio4_port_base(port); |
| 164 | if (!port_base) |
| 165 | return -ENODEV; |
| 166 | |
| 167 | mask = 0x01 << pin; |
| 168 | reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR; |
| 169 | |
| 170 | writel(mask, &port_base->mskr); |
| 171 | writel(reg, &port_base->cfgr); |
| 172 | |
| 173 | if (value) |
| 174 | writel(mask, &port_base->sodr); |
| 175 | else |
| 176 | writel(mask, &port_base->codr); |
| 177 | |
| 178 | return 0; |
| 179 | } |
| 180 | |
| 181 | int atmel_pio4_get_pio_input(u32 port, u32 pin) |
| 182 | { |
| 183 | struct atmel_pio4_port *port_base; |
| 184 | u32 reg, mask; |
| 185 | |
| 186 | if (pin >= ATMEL_PIO4_PINS_PER_BANK) |
| 187 | return -ENODEV; |
| 188 | |
| 189 | port_base = atmel_pio4_port_base(port); |
| 190 | if (!port_base) |
| 191 | return -ENODEV; |
| 192 | |
| 193 | mask = 0x01 << pin; |
| 194 | reg = ATMEL_PIO4_CFGR_FUNC_GPIO; |
| 195 | |
| 196 | writel(mask, &port_base->mskr); |
| 197 | writel(reg, &port_base->cfgr); |
| 198 | |
| 199 | return (readl(&port_base->pdsr) & mask) ? 1 : 0; |
| 200 | } |
| 201 | |
| 202 | #ifdef CONFIG_DM_GPIO |
| 203 | static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset) |
| 204 | { |
| 205 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 206 | struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr; |
| 207 | u32 mask = 0x01 << offset; |
| 208 | u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO; |
| 209 | |
| 210 | writel(mask, &port_base->mskr); |
| 211 | writel(reg, &port_base->cfgr); |
| 212 | |
| 213 | return 0; |
| 214 | } |
| 215 | |
| 216 | static int atmel_pio4_direction_output(struct udevice *dev, |
| 217 | unsigned offset, int value) |
| 218 | { |
| 219 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 220 | struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr; |
| 221 | u32 mask = 0x01 << offset; |
| 222 | u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR; |
| 223 | |
| 224 | writel(mask, &port_base->mskr); |
| 225 | writel(reg, &port_base->cfgr); |
| 226 | |
| 227 | if (value) |
| 228 | writel(mask, &port_base->sodr); |
| 229 | else |
| 230 | writel(mask, &port_base->codr); |
| 231 | |
| 232 | return 0; |
| 233 | } |
| 234 | |
| 235 | static int atmel_pio4_get_value(struct udevice *dev, unsigned offset) |
| 236 | { |
| 237 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 238 | struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr; |
| 239 | u32 mask = 0x01 << offset; |
| 240 | |
| 241 | return (readl(&port_base->pdsr) & mask) ? 1 : 0; |
| 242 | } |
| 243 | |
| 244 | static int atmel_pio4_set_value(struct udevice *dev, |
| 245 | unsigned offset, int value) |
| 246 | { |
| 247 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 248 | struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr; |
| 249 | u32 mask = 0x01 << offset; |
| 250 | |
| 251 | if (value) |
| 252 | writel(mask, &port_base->sodr); |
| 253 | else |
| 254 | writel(mask, &port_base->codr); |
| 255 | |
| 256 | return 0; |
| 257 | } |
| 258 | |
| 259 | static int atmel_pio4_get_function(struct udevice *dev, unsigned offset) |
| 260 | { |
| 261 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 262 | struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr; |
| 263 | u32 mask = 0x01 << offset; |
| 264 | |
| 265 | writel(mask, &port_base->mskr); |
| 266 | |
| 267 | return (readl(&port_base->cfgr) & |
| 268 | ATMEL_PIO4_CFGR_DIR) ? GPIOF_OUTPUT : GPIOF_INPUT; |
| 269 | } |
| 270 | |
| 271 | static const struct dm_gpio_ops atmel_pio4_ops = { |
| 272 | .direction_input = atmel_pio4_direction_input, |
| 273 | .direction_output = atmel_pio4_direction_output, |
| 274 | .get_value = atmel_pio4_get_value, |
| 275 | .set_value = atmel_pio4_set_value, |
| 276 | .get_function = atmel_pio4_get_function, |
| 277 | }; |
| 278 | |
| 279 | static int atmel_pio4_probe(struct udevice *dev) |
| 280 | { |
| 281 | struct at91_port_platdata *plat = dev_get_platdata(dev); |
| 282 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 283 | |
| 284 | uc_priv->bank_name = plat->bank_name; |
| 285 | uc_priv->gpio_count = ATMEL_PIO4_PINS_PER_BANK; |
| 286 | |
| 287 | return 0; |
| 288 | } |
| 289 | |
| 290 | U_BOOT_DRIVER(gpio_atmel_pio4) = { |
| 291 | .name = "gpio_atmel_pio4", |
| 292 | .id = UCLASS_GPIO, |
| 293 | .ops = &atmel_pio4_ops, |
| 294 | .probe = atmel_pio4_probe, |
| 295 | }; |
| 296 | #endif |