blob: f09e138bb8c57c0c078c9e2deee725e8b5c89883 [file] [log] [blame]
Max Filippovb25732c2016-08-07 08:53:00 +03001#
2# System reset devices
3#
4
5menu "System reset device drivers"
6
7config SYSRESET
8 bool "Enable support for system reset drivers"
9 depends on DM
10 help
11 Enable system reset drivers which can be used to reset the CPU or
12 board. Each driver can provide a reset method which will be called
13 to effect a reset. The uclass will try all available drivers when
14 reset_walk() is called.
15
Kever Yang09259fc2019-04-02 20:41:25 +080016config SPL_SYSRESET
17 bool "Enable support for system reset drivers in SPL mode"
18 depends on SYSRESET && SPL_DM
19 help
20 Enable system reset drivers which can be used to reset the CPU or
21 board. Each driver can provide a reset method which will be called
22 to effect a reset. The uclass will try all available drivers when
23 reset_walk() is called.
24
25config TPL_SYSRESET
26 bool "Enable support for system reset drivers in TPL mode"
27 depends on SYSRESET && TPL_DM
28 help
29 Enable system reset drivers which can be used to reset the CPU or
30 board. Each driver can provide a reset method which will be called
31 to effect a reset. The uclass will try all available drivers when
32 reset_walk() is called.
33
Masahiro Yamada573a3812017-04-14 11:10:24 +090034if SYSRESET
35
Urja Rannikkob8050512019-05-16 21:48:42 +000036if CMD_POWEROFF
37
38config SYSRESET_CMD_POWEROFF
39 bool "sysreset implementation of the poweroff command"
40 help
41 This should be selected by the appropriate PMIC driver if
42 the poweroff command is enabled.
43
44endif
45
Michal Simek0d832b32018-07-13 11:04:56 +020046config SYSRESET_GPIO
47 bool "Enable support for GPIO reset driver"
Chris Packham26680b92019-04-13 20:35:23 +120048 select DM_GPIO
Michal Simek0d832b32018-07-13 11:04:56 +020049 help
50 Reset support via GPIO pin connected reset logic. This is used for
51 example on Microblaze where reset logic can be controlled via GPIO
52 pin which triggers cpu reset.
53
Michal Simekcae39ae2018-07-13 17:00:13 +020054config SYSRESET_MICROBLAZE
55 bool "Enable support for Microblaze soft reset"
56 depends on MICROBLAZE
57 help
58 This is soft reset on Microblaze which does jump to 0x0 address.
59
Masahiro Yamada573a3812017-04-14 11:10:24 +090060config SYSRESET_PSCI
61 bool "Enable support for PSCI System Reset"
62 depends on ARM_PSCI_FW
Simon Goldschmidta8b50312019-07-16 21:29:32 +020063 select SPL_ARM_PSCI_FW if SPL
Masahiro Yamada573a3812017-04-14 11:10:24 +090064 help
65 Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware
66 must be running on your system.
67
Simon Goldschmidt1f166882019-07-15 21:47:53 +020068config SYSRESET_SOCFPGA
69 bool "Enable support for Intel SOCFPGA family"
70 depends on ARCH_SOCFPGA && (TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10)
71 help
72 This enables the system reset driver support for Intel SOCFPGA SoCs
73 (Cyclone 5, Arria 5 and Arria 10).
74
Simon Goldschmidt690c1292019-07-15 21:47:54 +020075config SYSRESET_SOCFPGA_S10
76 bool "Enable support for Intel SOCFPGA Stratix 10"
77 depends on ARCH_SOCFPGA && TARGET_SOCFPGA_STRATIX10
78 help
79 This enables the system reset driver support for Intel SOCFPGA
80 Stratix SoCs.
81
Andreas Dannenberg694b0522018-08-27 15:57:46 +053082config SYSRESET_TI_SCI
83 bool "TI System Control Interface (TI SCI) system reset driver"
84 depends on TI_SCI_PROTOCOL
85 help
86 This enables the system reset driver support over TI System Control
87 Interface available on some new TI's SoCs.
88
Masahiro Yamada573a3812017-04-14 11:10:24 +090089endif
Álvaro Fernández Rojase3889692017-04-25 00:39:14 +020090
91config SYSRESET_SYSCON
92 bool "Enable support for mfd syscon reboot driver"
93 select REGMAP
94 select SYSCON
95 help
96 Reboot support for generic SYSCON mapped register reset.
97
Álvaro Fernández Rojas17a0c142017-05-16 18:29:13 +020098config SYSRESET_WATCHDOG
99 bool "Enable support for watchdog reboot driver"
100 select WDT
101 help
102 Reboot support for generic watchdog reset.
103
Bin Mengfabb2b42018-07-03 02:48:40 -0700104config SYSRESET_X86
105 bool "Enable support for x86 processor reboot driver"
106 depends on X86
107 help
108 Reboot support for generic x86 processor reset.
109
Simon Glassff7abb82019-09-25 08:11:24 -0600110config SYSRESET_SPL_X86
111 bool "Enable support for x86 processor reboot driver in SPL"
112 depends on X86
113 help
114 Reboot support for generic x86 processor reset in SPL.
115
116config SYSRESET_TPL_X86
117 bool "Enable support for x86 processor reboot driver in TPL"
118 depends on X86
119 help
120 Reboot support for generic x86 processor reset in TPL.
121
Rasmus Villemoes875669d2019-12-13 15:47:58 +0000122config SYSRESET_MPC83XX
Mario Six76fdad12018-08-06 10:23:35 +0200123 bool "Enable support MPC83xx SoC family reboot driver"
124 help
125 Reboot support for NXP MPC83xx SoCs.
126
Max Filippovb25732c2016-08-07 08:53:00 +0300127endmenu