blob: 4512763b56a7b07d26d109c88f6fc87e40450ebe [file] [log] [blame]
Andy Fleming9082eea2011-04-07 21:56:05 -05001/*
2 * Broadcom PHY drivers
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Andy Fleming9082eea2011-04-07 21:56:05 -05005 *
6 * Copyright 2010-2011 Freescale Semiconductor, Inc.
7 * author Andy Fleming
Andy Fleming9082eea2011-04-07 21:56:05 -05008 */
9#include <config.h>
10#include <common.h>
11#include <phy.h>
12
13/* Broadcom BCM54xx -- taken from linux sungem_phy */
14#define MIIM_BCM54xx_AUXCNTL 0x18
15#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
16#define MIIM_BCM54xx_AUXSTATUS 0x19
17#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
18#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
19
20#define MIIM_BCM54XX_SHD 0x1c
21#define MIIM_BCM54XX_SHD_WRITE 0x8000
22#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
23#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
24#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
25 (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
26 MIIM_BCM54XX_SHD_DATA(data))
27
28#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
29#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
30#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
31#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
32
33/* Broadcom BCM5461S */
34static int bcm5461_config(struct phy_device *phydev)
35{
36 genphy_config_aneg(phydev);
37
38 phy_reset(phydev);
39
40 return 0;
41}
42
43static int bcm54xx_parse_status(struct phy_device *phydev)
44{
45 unsigned int mii_reg;
46
47 mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
48
49 switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
50 MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
51 case 1:
52 phydev->duplex = DUPLEX_HALF;
53 phydev->speed = SPEED_10;
54 break;
55 case 2:
56 phydev->duplex = DUPLEX_FULL;
57 phydev->speed = SPEED_10;
58 break;
59 case 3:
60 phydev->duplex = DUPLEX_HALF;
61 phydev->speed = SPEED_100;
62 break;
63 case 5:
64 phydev->duplex = DUPLEX_FULL;
65 phydev->speed = SPEED_100;
66 break;
67 case 6:
68 phydev->duplex = DUPLEX_HALF;
69 phydev->speed = SPEED_1000;
70 break;
71 case 7:
72 phydev->duplex = DUPLEX_FULL;
73 phydev->speed = SPEED_1000;
74 break;
75 default:
76 printf("Auto-neg error, defaulting to 10BT/HD\n");
77 phydev->duplex = DUPLEX_HALF;
78 phydev->speed = SPEED_10;
79 break;
80 }
81
82 return 0;
83}
84
85static int bcm54xx_startup(struct phy_device *phydev)
86{
87 /* Read the Status (2x to make sure link is right) */
88 genphy_update_link(phydev);
89 bcm54xx_parse_status(phydev);
90
91 return 0;
92}
93
94/* Broadcom BCM5482S */
95/*
96 * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
97 * circumstances. eg a gigabit TSEC connected to a gigabit switch with
98 * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
99 * link. "Ethernet@Wirespeed" reduces advertised speed until link
100 * can be achieved.
101 */
102static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
103{
104 return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
105}
106
107static int bcm5482_config(struct phy_device *phydev)
108{
109 unsigned int reg;
110
111 /* reset the PHY */
112 reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
113 reg |= BMCR_RESET;
114 phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
115
116 /* Setup read from auxilary control shadow register 7 */
117 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
118 MIIM_BCM54xx_AUXCNTL_ENCODE(7));
119 /* Read Misc Control register and or in Ethernet@Wirespeed */
120 reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
121 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
122
123 /* Initial config/enable of secondary SerDes interface */
124 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
125 MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
126 /* Write intial value to secondary SerDes Contol */
127 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
128 MIIM_BCM54XX_EXP_SEL_SSD | 0);
129 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
130 BMCR_ANRESTART);
131 /* Enable copper/fiber auto-detect */
132 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
133 MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
134
135 genphy_config_aneg(phydev);
136
137 return 0;
138}
139
140/*
141 * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
142 * 0x42 - "Operating Mode Status Register"
143 */
144static int bcm5482_is_serdes(struct phy_device *phydev)
145{
146 u16 val;
147 int serdes = 0;
148
149 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
150 MIIM_BCM54XX_EXP_SEL_ER | 0x42);
151 val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
152
153 switch (val & 0x1f) {
154 case 0x0d: /* RGMII-to-100Base-FX */
155 case 0x0e: /* RGMII-to-SGMII */
156 case 0x0f: /* RGMII-to-SerDes */
157 case 0x12: /* SGMII-to-SerDes */
158 case 0x13: /* SGMII-to-100Base-FX */
159 case 0x16: /* SerDes-to-Serdes */
160 serdes = 1;
161 break;
162 case 0x6: /* RGMII-to-Copper */
163 case 0x14: /* SGMII-to-Copper */
164 case 0x17: /* SerDes-to-Copper */
165 break;
166 default:
167 printf("ERROR, invalid PHY mode (0x%x\n)", val);
168 break;
169 }
170
171 return serdes;
172}
173
174/*
175 * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
176 * Mode Status Register"
177 */
178static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
179{
180 u16 val;
181 int i = 0;
182
183 /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
184 while (1) {
185 phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
186 MIIM_BCM54XX_EXP_SEL_ER | 0x42);
187 val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
188
189 if (val & 0x8000)
190 break;
191
192 if (i++ > 1000) {
193 phydev->link = 0;
194 return 1;
195 }
196
197 udelay(1000); /* 1 ms */
198 }
199
200 phydev->link = 1;
201 switch ((val >> 13) & 0x3) {
202 case (0x00):
203 phydev->speed = 10;
204 break;
205 case (0x01):
206 phydev->speed = 100;
207 break;
208 case (0x02):
209 phydev->speed = 1000;
210 break;
211 }
212
213 phydev->duplex = (val & 0x1000) == 0x1000;
214
215 return 0;
216}
217
218/*
219 * Figure out if BCM5482 is in serdes or copper mode and determine link
220 * configuration accordingly
221 */
222static int bcm5482_startup(struct phy_device *phydev)
223{
224 if (bcm5482_is_serdes(phydev)) {
225 bcm5482_parse_serdes_sr(phydev);
226 phydev->port = PORT_FIBRE;
227 } else {
228 /* Wait for auto-negotiation to complete or fail */
229 genphy_update_link(phydev);
230 /* Parse BCM54xx copper aux status register */
231 bcm54xx_parse_status(phydev);
232 }
233
234 return 0;
235}
236
237static struct phy_driver BCM5461S_driver = {
238 .name = "Broadcom BCM5461S",
239 .uid = 0x2060c0,
240 .mask = 0xfffff0,
241 .features = PHY_GBIT_FEATURES,
242 .config = &bcm5461_config,
243 .startup = &bcm54xx_startup,
244 .shutdown = &genphy_shutdown,
245};
246
247static struct phy_driver BCM5464S_driver = {
248 .name = "Broadcom BCM5464S",
249 .uid = 0x2060b0,
250 .mask = 0xfffff0,
251 .features = PHY_GBIT_FEATURES,
252 .config = &bcm5461_config,
253 .startup = &bcm54xx_startup,
254 .shutdown = &genphy_shutdown,
255};
256
257static struct phy_driver BCM5482S_driver = {
258 .name = "Broadcom BCM5482S",
259 .uid = 0x143bcb0,
260 .mask = 0xffffff0,
261 .features = PHY_GBIT_FEATURES,
262 .config = &bcm5482_config,
263 .startup = &bcm5482_startup,
264 .shutdown = &genphy_shutdown,
265};
266
267int phy_broadcom_init(void)
268{
269 phy_register(&BCM5482S_driver);
270 phy_register(&BCM5464S_driver);
271 phy_register(&BCM5461S_driver);
272
273 return 0;
274}