include/linux/mc146818rtc.h

/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
 * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
 * derived from Data Sheet, Copyright Motorola 1984 (!).
 * It was written to be part of the Linux operating system.
 */
/* permission is hereby granted to copy, modify and redistribute this code
 * in terms of the GNU Library General Public License, Version 2 or later,
 * at your option.
 */

#ifndef _MC146818RTC_H
#define _MC146818RTC_H

#include <asm/io.h>
#include <linux/rtc.h>          /* get the user-level API */
#include <asm/mc146818rtc.h>        /* register access macros */

/**********************************************************************
 * register summary
 **********************************************************************/
#define RTC_SECONDS     0
#define RTC_SECONDS_ALARM   1
#define RTC_MINUTES     2
#define RTC_MINUTES_ALARM   3
#define RTC_HOURS       4
#define RTC_HOURS_ALARM     5
/* RTC_*_alarm is always true if 2 MSBs are set */
# define RTC_ALARM_DONT_CARE    0xC0

#define RTC_DAY_OF_WEEK     6
#define RTC_DAY_OF_MONTH    7
#define RTC_MONTH       8
#define RTC_YEAR        9

/* control registers - Moto names
 */
#define RTC_REG_A       10
#define RTC_REG_B       11
#define RTC_REG_C       12
#define RTC_REG_D       13

/**********************************************************************
 * register details
 **********************************************************************/
#define RTC_FREQ_SELECT RTC_REG_A

/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
 * totalling to a max high interval of 2.228 ms.
 */
# define RTC_UIP        0x80
# define RTC_DIV_CTL        0x70
   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
#  define RTC_REF_CLCK_4MHZ 0x00
#  define RTC_REF_CLCK_1MHZ 0x10
#  define RTC_REF_CLCK_32KHZ    0x20
   /* 2 values for divider stage reset, others for "testing purposes only" */
#  define RTC_DIV_RESET1    0x60
#  define RTC_DIV_RESET2    0x70
  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
# define RTC_RATE_SELECT    0x0F

/**********************************************************************/
#define RTC_CONTROL RTC_REG_B
# define RTC_SET 0x80       /* disable updates for clock setting */
# define RTC_PIE 0x40       /* periodic interrupt enable */
# define RTC_AIE 0x20       /* alarm interrupt enable */
# define RTC_UIE 0x10       /* update-finished interrupt enable */
# define RTC_SQWE 0x08      /* enable square-wave output */
# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
# define RTC_24H 0x02       /* 24 hour mode - else hours bit 7 means pm */
# define RTC_DST_EN 0x01    /* auto switch DST - works f. USA only */

/**********************************************************************/
#define RTC_INTR_FLAGS  RTC_REG_C
/* caution - cleared by read */
# define RTC_IRQF 0x80      /* any of the following 3 is active */
# define RTC_PF 0x40
# define RTC_AF 0x20
# define RTC_UF 0x10

/**********************************************************************/
#define RTC_VALID   RTC_REG_D
# define RTC_VRT 0x80       /* valid RAM and time */
/**********************************************************************/

/* example: !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
 * determines if the following two #defines are needed
 */
#ifndef BCD_TO_BIN
#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
#endif

#ifndef BIN_TO_BCD
#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
#endif

#endif /* _MC146818RTC_H */