Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / bd483b7a9fd0468518b98105013c5a9fed0a3467 / . / arch / arm / dts / imx6qdl-gw54xx.dtsi
blob: cda48bf2f168d238057682094157068d87918b17 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/sound/fsl-imx-audmux.h>
10
11/ {
12 /* these are used by bootloader for disabling nodes */
13 aliases {
14 led0 = &led0;
15 led1 = &led1;
16 led2 = &led2;
17 nand = &gpmi;
18 ssi0 = &ssi1;
Marcel Ziswilerd0399a42022-07-21 15:27:26 +0200[diff] [blame]19 usb0 = &usbh1;
20 usb1 = &usbotg;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]21 };
22
23 chosen {
24 bootargs = "console=ttymxc1,115200";
25 };
26
27 backlight {
28 compatible = "pwm-backlight";
29 pwms = <&pwm4 0 5000000>;
30 brightness-levels = <0 4 8 16 32 64 128 255>;
31 default-brightness-level = <7>;
32 };
33
34 gpio-keys {
35 compatible = "gpio-keys";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]36
37 user-pb {
38 label = "user_pb";
39 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
40 linux,code = <BTN_0>;
41 };
42
43 user-pb1x {
44 label = "user_pb1x";
45 linux,code = <BTN_1>;
46 interrupt-parent = <&gsc>;
47 interrupts = <0>;
48 };
49
50 key-erased {
51 label = "key-erased";
52 linux,code = <BTN_2>;
53 interrupt-parent = <&gsc>;
54 interrupts = <1>;
55 };
56
57 eeprom-wp {
58 label = "eeprom_wp";
59 linux,code = <BTN_3>;
60 interrupt-parent = <&gsc>;
61 interrupts = <2>;
62 };
63
64 tamper {
65 label = "tamper";
66 linux,code = <BTN_4>;
67 interrupt-parent = <&gsc>;
68 interrupts = <5>;
69 };
70
71 switch-hold {
72 label = "switch_hold";
73 linux,code = <BTN_5>;
74 interrupt-parent = <&gsc>;
75 interrupts = <7>;
76 };
77 };
78
79 leds {
80 compatible = "gpio-leds";
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_gpio_leds>;
83
84 led0: user1 {
85 label = "user1";
86 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
87 default-state = "on";
88 linux,default-trigger = "heartbeat";
89 };
90
91 led1: user2 {
92 label = "user2";
93 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
94 default-state = "off";
95 };
96
97 led2: user3 {
98 label = "user3";
99 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
100 default-state = "off";
101 };
102 };
103
104 memory@10000000 {
105 device_type = "memory";
106 reg = <0x10000000 0x40000000>;
107 };
108
109 pps {
110 compatible = "pps-gpio";
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_pps>;
113 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
114 status = "okay";
115 };
116
117 regulators {
118 compatible = "simple-bus";
119 #address-cells = <1>;
120 #size-cells = <0>;
121
122 reg_1p0v: regulator@0 {
123 compatible = "regulator-fixed";
124 reg = <0>;
125 regulator-name = "1P0V";
126 regulator-min-microvolt = <1000000>;
127 regulator-max-microvolt = <1000000>;
128 regulator-always-on;
129 };
130
131 reg_3p3v: regulator@1 {
132 compatible = "regulator-fixed";
133 reg = <1>;
134 regulator-name = "3P3V";
135 regulator-min-microvolt = <3300000>;
136 regulator-max-microvolt = <3300000>;
137 regulator-always-on;
138 };
139
140 reg_usb_h1_vbus: regulator@2 {
141 compatible = "regulator-fixed";
142 reg = <2>;
143 regulator-name = "usb_h1_vbus";
144 regulator-min-microvolt = <5000000>;
145 regulator-max-microvolt = <5000000>;
Marcel Ziswilerd0399a42022-07-21 15:27:26 +0200[diff] [blame]146 regulator-always-on;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]147 };
148
149 reg_usb_otg_vbus: regulator@3 {
150 compatible = "regulator-fixed";
151 reg = <3>;
152 regulator-name = "usb_otg_vbus";
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
155 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
156 enable-active-high;
157 };
158 };
159
160 sound-analog {
161 compatible = "fsl,imx6q-ventana-sgtl5000",
162 "fsl,imx-audio-sgtl5000";
163 model = "sgtl5000-audio";
164 ssi-controller = <&ssi1>;
165 audio-codec = <&sgtl5000>;
166 audio-routing =
167 "MIC_IN", "Mic Jack",
168 "Mic Jack", "Mic Bias",
169 "Headphone Jack", "HP_OUT";
170 mux-int-port = <1>;
171 mux-ext-port = <4>;
172 };
173};
174
175&audmux {
176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
178 status = "okay";
179
180 ssi2 {
181 fsl,audmux-port = <1>;
182 fsl,port-config = <
183 (IMX_AUDMUX_V2_PTCR_TFSDIR |
184 IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
185 IMX_AUDMUX_V2_PTCR_TCLKDIR |
186 IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
187 IMX_AUDMUX_V2_PTCR_SYN)
188 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
189 >;
190 };
191
192 aud5 {
193 fsl,audmux-port = <4>;
194 fsl,port-config = <
195 IMX_AUDMUX_V2_PTCR_SYN
196 IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
197 };
198};
199
200&can1 {
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_flexcan1>;
203 status = "okay";
204};
205
206&clks {
207 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
208 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
209 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
210 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
211};
212
213&ecspi2 {
214 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_ecspi2>;
217 status = "okay";
218};
219
220&fec {
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_enet>;
223 phy-mode = "rgmii-id";
224 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
225 status = "okay";
226};
227
228&gpmi {
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_gpmi_nand>;
231 status = "okay";
232};
233
234&hdmi {
235 ddc-i2c-bus = <&i2c3>;
236 status = "okay";
237};
238
239&i2c1 {
240 clock-frequency = <100000>;
241 pinctrl-names = "default";
242 pinctrl-0 = <&pinctrl_i2c1>;
243 status = "okay";
244
245 gsc: gsc@20 {
246 compatible = "gw,gsc";
247 reg = <0x20>;
248 interrupt-parent = <&gpio1>;
249 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
250 interrupt-controller;
251 #interrupt-cells = <1>;
252 #address-cells = <1>;
253 #size-cells = <0>;
254
255 adc {
256 compatible = "gw,gsc-adc";
257 #address-cells = <1>;
258 #size-cells = <0>;
259
260 channel@0 {
261 gw,mode = <0>;
262 reg = <0x00>;
263 label = "temp";
264 };
265
266 channel@2 {
267 gw,mode = <1>;
268 reg = <0x02>;
269 label = "vdd_vin";
270 };
271
272 channel@5 {
273 gw,mode = <1>;
274 reg = <0x05>;
275 label = "vdd_3p3";
276 };
277
278 channel@8 {
279 gw,mode = <1>;
280 reg = <0x08>;
281 label = "vdd_bat";
282 };
283
284 channel@b {
285 gw,mode = <1>;
286 reg = <0x0b>;
287 label = "vdd_5p0";
288 };
289
290 channel@e {
291 gw,mode = <1>;
292 reg = <0xe>;
293 label = "vdd_arm";
294 };
295
296 channel@11 {
297 gw,mode = <1>;
298 reg = <0x11>;
299 label = "vdd_soc";
300 };
301
302 channel@14 {
303 gw,mode = <1>;
304 reg = <0x14>;
305 label = "vdd_3p0";
306 };
307
308 channel@17 {
309 gw,mode = <1>;
310 reg = <0x17>;
311 label = "vdd_1p5";
312 };
313
314 channel@1d {
315 gw,mode = <1>;
316 reg = <0x1d>;
317 label = "vdd_1p8";
318 };
319
320 channel@20 {
321 gw,mode = <1>;
322 reg = <0x20>;
323 label = "vdd_1p0";
324 };
325
326 channel@23 {
327 gw,mode = <1>;
328 reg = <0x23>;
329 label = "vdd_2p5";
330 };
331
332 channel@26 {
333 gw,mode = <1>;
334 reg = <0x26>;
335 label = "vdd_gps";
336 };
337 };
338
339 fan-controller@2c {
340 compatible = "gw,gsc-fan";
341 #address-cells = <1>;
342 #size-cells = <0>;
343 reg = <0x2c>;
344 };
345 };
346
347 gsc_gpio: gpio@23 {
348 compatible = "nxp,pca9555";
349 reg = <0x23>;
350 gpio-controller;
351 #gpio-cells = <2>;
352 interrupt-parent = <&gsc>;
353 interrupts = <4>;
354 };
355
356 eeprom1: eeprom@50 {
357 compatible = "atmel,24c02";
358 reg = <0x50>;
359 pagesize = <16>;
360 };
361
362 eeprom2: eeprom@51 {
363 compatible = "atmel,24c02";
364 reg = <0x51>;
365 pagesize = <16>;
366 };
367
368 eeprom3: eeprom@52 {
369 compatible = "atmel,24c02";
370 reg = <0x52>;
371 pagesize = <16>;
372 };
373
374 eeprom4: eeprom@53 {
375 compatible = "atmel,24c02";
376 reg = <0x53>;
377 pagesize = <16>;
378 };
379
380 rtc: ds1672@68 {
381 compatible = "dallas,ds1672";
382 reg = <0x68>;
383 };
384};
385
386&i2c2 {
387 clock-frequency = <100000>;
388 pinctrl-names = "default";
389 pinctrl-0 = <&pinctrl_i2c2>;
390 status = "okay";
391
392 pmic: pfuze100@8 {
393 compatible = "fsl,pfuze100";
394 reg = <0x08>;
395
396 regulators {
397 sw1a_reg: sw1ab {
398 regulator-min-microvolt = <300000>;
399 regulator-max-microvolt = <1875000>;
400 regulator-boot-on;
401 regulator-always-on;
402 regulator-ramp-delay = <6250>;
403 };
404
405 sw1c_reg: sw1c {
406 regulator-min-microvolt = <300000>;
407 regulator-max-microvolt = <1875000>;
408 regulator-boot-on;
409 regulator-always-on;
410 regulator-ramp-delay = <6250>;
411 };
412
413 sw2_reg: sw2 {
414 regulator-min-microvolt = <800000>;
415 regulator-max-microvolt = <3950000>;
416 regulator-boot-on;
417 regulator-always-on;
418 };
419
420 sw3a_reg: sw3a {
421 regulator-min-microvolt = <400000>;
422 regulator-max-microvolt = <1975000>;
423 regulator-boot-on;
424 regulator-always-on;
425 };
426
427 sw3b_reg: sw3b {
428 regulator-min-microvolt = <400000>;
429 regulator-max-microvolt = <1975000>;
430 regulator-boot-on;
431 regulator-always-on;
432 };
433
434 sw4_reg: sw4 {
435 regulator-min-microvolt = <800000>;
436 regulator-max-microvolt = <3300000>;
437 };
438
439 swbst_reg: swbst {
440 regulator-min-microvolt = <5000000>;
441 regulator-max-microvolt = <5150000>;
442 regulator-boot-on;
443 regulator-always-on;
444 };
445
446 snvs_reg: vsnvs {
447 regulator-min-microvolt = <1000000>;
448 regulator-max-microvolt = <3000000>;
449 regulator-boot-on;
450 regulator-always-on;
451 };
452
453 vref_reg: vrefddr {
454 regulator-boot-on;
455 regulator-always-on;
456 };
457
458 vgen1_reg: vgen1 {
459 regulator-min-microvolt = <800000>;
460 regulator-max-microvolt = <1550000>;
461 };
462
463 vgen2_reg: vgen2 {
464 regulator-min-microvolt = <800000>;
465 regulator-max-microvolt = <1550000>;
466 };
467
468 vgen3_reg: vgen3 {
469 regulator-min-microvolt = <1800000>;
470 regulator-max-microvolt = <3300000>;
471 };
472
473 vgen4_reg: vgen4 {
474 regulator-min-microvolt = <1800000>;
475 regulator-max-microvolt = <3300000>;
476 regulator-always-on;
477 };
478
479 vgen5_reg: vgen5 {
480 regulator-min-microvolt = <1800000>;
481 regulator-max-microvolt = <3300000>;
482 regulator-always-on;
483 };
484
485 vgen6_reg: vgen6 {
486 regulator-min-microvolt = <1800000>;
487 regulator-max-microvolt = <3300000>;
488 regulator-always-on;
489 };
490 };
491 };
492};
493
494&i2c3 {
495 clock-frequency = <100000>;
496 pinctrl-names = "default";
497 pinctrl-0 = <&pinctrl_i2c3>;
498 status = "okay";
499
500 sgtl5000: audio-codec@a {
501 compatible = "fsl,sgtl5000";
502 reg = <0x0a>;
503 clocks = <&clks IMX6QDL_CLK_CKO>;
504 VDDA-supply = <&sw4_reg>;
505 VDDIO-supply = <&reg_3p3v>;
506 };
507
508 touchscreen: egalax_ts@4 {
509 compatible = "eeti,egalax_ts";
510 reg = <0x04>;
511 interrupt-parent = <&gpio7>;
512 interrupts = <12 2>;
513 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
514 };
515
516 accel@1e {
517 compatible = "nxp,fxos8700";
518 reg = <0x1e>;
519 };
520};
521
522&ldb {
523 status = "okay";
524
525 lvds-channel@0 {
526 fsl,data-mapping = "spwg";
527 fsl,data-width = <18>;
528 status = "okay";
529
530 display-timings {
531 native-mode = <&timing0>;
532 timing0: hsd100pxn1 {
533 clock-frequency = <65000000>;
534 hactive = <1024>;
535 vactive = <768>;
536 hback-porch = <220>;
537 hfront-porch = <40>;
538 vback-porch = <21>;
539 vfront-porch = <7>;
540 hsync-len = <60>;
541 vsync-len = <10>;
542 };
543 };
544 };
545};
546
547&pcie {
548 pinctrl-names = "default";
549 pinctrl-0 = <&pinctrl_pcie>;
550 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
551 status = "okay";
552};
553
554&pwm1 {
555 pinctrl-names = "default";
556 pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
557 status = "disabled";
558};
559
560&pwm2 {
561 pinctrl-names = "default";
562 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
563 status = "disabled";
564};
565
566&pwm3 {
567 pinctrl-names = "default";
568 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
569 status = "disabled";
570};
571
572&pwm4 {
573 #pwm-cells = <2>;
574 pinctrl-names = "default", "state_dio";
575 pinctrl-0 = <&pinctrl_pwm4_backlight>;
576 pinctrl-1 = <&pinctrl_pwm4_dio>;
577 status = "okay";
578};
579
580&ssi1 {
581 status = "okay";
582};
583
584&ssi2 {
585 status = "okay";
586};
587
588&uart1 {
589 pinctrl-names = "default";
590 pinctrl-0 = <&pinctrl_uart1>;
591 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
592 status = "okay";
593};
594
595&uart2 {
596 pinctrl-names = "default";
597 pinctrl-0 = <&pinctrl_uart2>;
598 status = "okay";
599};
600
601&uart5 {
602 pinctrl-names = "default";
603 pinctrl-0 = <&pinctrl_uart5>;
604 status = "okay";
605};
606
607&usbotg {
608 vbus-supply = <&reg_usb_otg_vbus>;
609 pinctrl-names = "default";
610 pinctrl-0 = <&pinctrl_usbotg>;
611 disable-over-current;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]612 status = "okay";
613};
614
615&usbh1 {
616 vbus-supply = <&reg_usb_h1_vbus>;
617 status = "okay";
618};
619
620&usdhc3 {
621 pinctrl-names = "default", "state_100mhz", "state_200mhz";
622 pinctrl-0 = <&pinctrl_usdhc3>;
623 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
624 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
625 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
626 vmmc-supply = <&reg_3p3v>;
627 no-1-8-v; /* firmware will remove if board revision supports */
628 status = "okay";
629};
630
631&wdog1 {
632 status = "disabled";
633};
634
635&wdog2 {
636 pinctrl-names = "default";
637 pinctrl-0 = <&pinctrl_wdog>;
638 fsl,ext-reset-output;
639 status = "okay";
640};
641
642&iomuxc {
643 pinctrl_audmux: audmuxgrp {
644 fsl,pins = <
645 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
646 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
647 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
648 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
649 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
650 MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0
651 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
652 MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0
653 >;
654 };
655
656 pinctrl_enet: enetgrp {
657 fsl,pins = <
658 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
659 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
660 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
661 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
662 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
663 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
664 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
665 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
666 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
667 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
668 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
669 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
670 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
671 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
672 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
673 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]674 >;
675 };
676
677 pinctrl_ecspi2: escpi2grp {
678 fsl,pins = <
679 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
680 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
681 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
682 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
683 >;
684 };
685
686 pinctrl_flexcan1: flexcan1grp {
687 fsl,pins = <
688 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
689 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
690 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
691 >;
692 };
693
694 pinctrl_gpio_leds: gpioledsgrp {
695 fsl,pins = <
696 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
697 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
698 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
699 >;
700 };
701
702 pinctrl_gpmi_nand: gpminandgrp {
703 fsl,pins = <
704 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
705 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
706 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
707 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
708 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
709 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
710 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
711 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
712 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
713 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
714 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
715 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
716 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
717 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
718 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
719 >;
720 };
721
722 pinctrl_i2c1: i2c1grp {
723 fsl,pins = <
724 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
725 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
726 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
727 >;
728 };
729
730 pinctrl_i2c2: i2c2grp {
731 fsl,pins = <
732 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
733 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
734 >;
735 };
736
737 pinctrl_i2c3: i2c3grp {
738 fsl,pins = <
739 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
740 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
741 >;
742 };
743
744 pinctrl_pcie: pciegrp {
745 fsl,pins = <
746 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
747 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
748 >;
749 };
750
751 pinctrl_pps: ppsgrp {
752 fsl,pins = <
753 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
754 >;
755 };
756
757 pinctrl_pwm1: pwm1grp {
758 fsl,pins = <
759 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
760 >;
761 };
762
763 pinctrl_pwm2: pwm2grp {
764 fsl,pins = <
765 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
766 >;
767 };
768
769 pinctrl_pwm3: pwm3grp {
770 fsl,pins = <
771 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
772 >;
773 };
774
775 pinctrl_pwm4_backlight: pwm4grpbacklight {
776 fsl,pins = <
777 /* LVDS_PWM J6.5 */
778 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
779 >;
780 };
781
782 pinctrl_pwm4_dio: pwm4grpdio {
783 fsl,pins = <
784 /* DIO3 J16.4 */
785 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
786 >;
787 };
788
789 pinctrl_uart1: uart1grp {
790 fsl,pins = <
791 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
792 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
793 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
794 >;
795 };
796
797 pinctrl_uart2: uart2grp {
798 fsl,pins = <
799 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
800 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
801 >;
802 };
803
804 pinctrl_uart5: uart5grp {
805 fsl,pins = <
806 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
807 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
808 >;
809 };
810
811 pinctrl_usbotg: usbotggrp {
812 fsl,pins = <
813 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
814 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
Tim Harveya194e6e2021-07-24 10:40:38 -0700[diff] [blame]815 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]816 >;
817 };
818
819 pinctrl_usdhc3: usdhc3grp {
820 fsl,pins = <
821 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
822 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
823 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
824 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
825 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
826 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
827 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
828 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
829 >;
830 };
831
832 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
833 fsl,pins = <
834 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
835 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
836 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
837 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
838 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
839 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
840 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
841 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
842 >;
843 };
844
845 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
846 fsl,pins = <
847 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
848 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
849 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
850 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
851 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
852 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
853 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
854 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
855 >;
856 };
857
858 pinctrl_wdog: wdoggrp {
859 fsl,pins = <
860 MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
861 >;
862 };
863};