blob: 84600b12014bea12c17e885192a797d4ce74f792 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Paul Thacker9e160ee2016-01-28 15:30:14 +05302/*
3 * (c) 2015 Paul Thacker <paul.thacker@microchip.com>
4 *
Paul Thacker9e160ee2016-01-28 15:30:14 +05305 */
6#include <common.h>
7#include <clk.h>
8#include <dm.h>
9#include <serial.h>
10#include <wait_bit.h>
11#include <mach/pic32.h>
12#include <dt-bindings/clock/microchip,clock.h>
13
14DECLARE_GLOBAL_DATA_PTR;
15
16/* UART Control Registers */
17#define U_MOD 0x00
18#define U_MODCLR (U_MOD + _CLR_OFFSET)
19#define U_MODSET (U_MOD + _SET_OFFSET)
20#define U_STA 0x10
21#define U_STACLR (U_STA + _CLR_OFFSET)
22#define U_STASET (U_STA + _SET_OFFSET)
23#define U_TXR 0x20
24#define U_RXR 0x30
25#define U_BRG 0x40
26
27/* U_MOD bits */
28#define UART_ENABLE BIT(15)
29
30/* U_STA bits */
31#define UART_RX_ENABLE BIT(12)
32#define UART_TX_BRK BIT(11)
33#define UART_TX_ENABLE BIT(10)
34#define UART_TX_FULL BIT(9)
35#define UART_TX_EMPTY BIT(8)
36#define UART_RX_OVER BIT(1)
37#define UART_RX_DATA_AVAIL BIT(0)
38
39struct pic32_uart_priv {
40 void __iomem *base;
41 ulong uartclk;
42};
43
44/*
45 * Initialize the serial port with the given baudrate.
46 * The settings are always 8 data bits, no parity, 1 stop bit, no start bits.
47 */
48static int pic32_serial_init(void __iomem *base, ulong clk, u32 baudrate)
49{
50 u32 div = DIV_ROUND_CLOSEST(clk, baudrate * 16);
51
52 /* wait for TX FIFO to empty */
Álvaro Fernández Rojas48263502018-01-23 17:14:55 +010053 wait_for_bit_le32(base + U_STA, UART_TX_EMPTY,
54 true, CONFIG_SYS_HZ, false);
Paul Thacker9e160ee2016-01-28 15:30:14 +053055
56 /* send break */
57 writel(UART_TX_BRK, base + U_STASET);
58
59 /* disable and clear mode */
60 writel(0, base + U_MOD);
61 writel(0, base + U_STA);
62
63 /* set baud rate generator */
64 writel(div - 1, base + U_BRG);
65
66 /* enable the UART for TX and RX */
67 writel(UART_TX_ENABLE | UART_RX_ENABLE, base + U_STASET);
68
69 /* enable the UART */
70 writel(UART_ENABLE, base + U_MODSET);
71 return 0;
72}
73
74/* Check whether any char pending in RX fifo */
75static int pic32_uart_pending_input(void __iomem *base)
76{
77 /* check if rx buffer overrun error has occurred */
78 if (readl(base + U_STA) & UART_RX_OVER) {
79 readl(base + U_RXR);
80
81 /* clear overrun error to keep receiving */
82 writel(UART_RX_OVER, base + U_STACLR);
83 }
84
85 /* In PIC32 there is no way to know number of outstanding
86 * chars in rx-fifo. Only it can be known whether there is any.
87 */
88 return readl(base + U_STA) & UART_RX_DATA_AVAIL;
89}
90
91static int pic32_uart_pending(struct udevice *dev, bool input)
92{
93 struct pic32_uart_priv *priv = dev_get_priv(dev);
94
95 if (input)
96 return pic32_uart_pending_input(priv->base);
97
98 return !(readl(priv->base + U_STA) & UART_TX_EMPTY);
99}
100
101static int pic32_uart_setbrg(struct udevice *dev, int baudrate)
102{
103 struct pic32_uart_priv *priv = dev_get_priv(dev);
104
105 return pic32_serial_init(priv->base, priv->uartclk, baudrate);
106}
107
108static int pic32_uart_putc(struct udevice *dev, const char ch)
109{
110 struct pic32_uart_priv *priv = dev_get_priv(dev);
111
112 /* Check if Tx FIFO is full */
113 if (readl(priv->base + U_STA) & UART_TX_FULL)
114 return -EAGAIN;
115
116 /* pump the char to tx buffer */
117 writel(ch, priv->base + U_TXR);
118
119 return 0;
120}
121
122static int pic32_uart_getc(struct udevice *dev)
123{
124 struct pic32_uart_priv *priv = dev_get_priv(dev);
125
126 /* return error if RX fifo is empty */
127 if (!pic32_uart_pending_input(priv->base))
128 return -EAGAIN;
129
130 /* read the character from rx buffer */
131 return readl(priv->base + U_RXR) & 0xff;
132}
133
134static int pic32_uart_probe(struct udevice *dev)
135{
136 struct pic32_uart_priv *priv = dev_get_priv(dev);
Stephen Warren135aa952016-06-17 09:44:00 -0600137 struct clk clk;
Paul Thacker9e160ee2016-01-28 15:30:14 +0530138 fdt_addr_t addr;
139 fdt_size_t size;
140 int ret;
141
142 /* get address */
Simon Glasse160f7d2017-01-17 16:52:55 -0700143 addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
144 &size);
Paul Thacker9e160ee2016-01-28 15:30:14 +0530145 if (addr == FDT_ADDR_T_NONE)
146 return -EINVAL;
147
148 priv->base = ioremap(addr, size);
149
150 /* get clock rate */
Stephen Warren135aa952016-06-17 09:44:00 -0600151 ret = clk_get_by_index(dev, 0, &clk);
Paul Thacker9e160ee2016-01-28 15:30:14 +0530152 if (ret < 0)
153 return ret;
Stephen Warren135aa952016-06-17 09:44:00 -0600154 priv->uartclk = clk_get_rate(&clk);
155 clk_free(&clk);
Paul Thacker9e160ee2016-01-28 15:30:14 +0530156
157 /* initialize serial */
158 return pic32_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
159}
160
161static const struct dm_serial_ops pic32_uart_ops = {
162 .putc = pic32_uart_putc,
163 .pending = pic32_uart_pending,
164 .getc = pic32_uart_getc,
165 .setbrg = pic32_uart_setbrg,
166};
167
168static const struct udevice_id pic32_uart_ids[] = {
169 { .compatible = "microchip,pic32mzda-uart" },
170 {}
171};
172
173U_BOOT_DRIVER(pic32_serial) = {
174 .name = "pic32-uart",
175 .id = UCLASS_SERIAL,
176 .of_match = pic32_uart_ids,
177 .probe = pic32_uart_probe,
178 .ops = &pic32_uart_ops,
Paul Thacker9e160ee2016-01-28 15:30:14 +0530179 .priv_auto_alloc_size = sizeof(struct pic32_uart_priv),
180};
181
182#ifdef CONFIG_DEBUG_UART_PIC32
183#include <debug_uart.h>
184
185static inline void _debug_uart_init(void)
186{
187 void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
188
189 pic32_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
190}
191
192static inline void _debug_uart_putc(int ch)
193{
194 writel(ch, CONFIG_DEBUG_UART_BASE + U_TXR);
195}
196
197DEBUG_UART_FUNCS
198#endif