Gitiles
Code Review Sign In
gerrit.cesnet.cz / github / trini / u-boot / b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8 / . / arch / arm / mach-sunxi / clock_sun8i_a83t.c
blob: a55a6162d44b0499e8957a2da53c31f5bd3d44b9 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
vishnupatekarf5429482015-11-29 01:07:24 +0800[diff] [blame]2/*
3 * A83 specific clock code
4 *
5 * (C) Copyright 2007-2012
6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
7 * Tom Cubie <tangliang@allwinnertech.com>
8 *
9 * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
vishnupatekarf5429482015-11-29 01:07:24 +0800[diff] [blame]10 */
11
12#include <common.h>
13#include <asm/io.h>
14#include <asm/arch/clock.h>
15#include <asm/arch/prcm.h>
16#include <asm/arch/sys_proto.h>
17
18#ifdef CONFIG_SPL_BUILD
19void clock_init_safe(void)
20{
21 struct sunxi_ccm_reg * const ccm =
22 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
23
24 clock_set_pll1(408000000);
25 /* enable pll_hsic, default is 480M */
26 writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
27 writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
28 while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
29
30 /* switch to default 24MHz before changing to hsic */
31 writel(0x0, &ccm->cci400_cfg);
32 sdelay(50);
33 writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
34 sdelay(100);
35
36 /* switch before changing pll6 */
37 clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
38 AHB1_CLK_SRC_OSC24M);
39 writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
40 while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
41
42 writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
43 writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
44 writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
45
46 /* timestamp */
47 writel(1, 0x01720000);
48}
49#endif
50
51void clock_init_uart(void)
52{
53 struct sunxi_ccm_reg *const ccm =
54 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
55
56 /* uart clock source is apb2 */
57 writel(APB2_CLK_SRC_OSC24M|
58 APB2_CLK_RATE_N_1|
59 APB2_CLK_RATE_M(1),
60 &ccm->apb2_div);
61
62 /* open the clock for uart */
63 setbits_le32(&ccm->apb2_gate,
64 CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
65 CONFIG_CONS_INDEX - 1));
66
67 /* deassert uart reset */
68 setbits_le32(&ccm->apb2_reset_cfg,
69 1 << (APB2_RESET_UART_SHIFT +
70 CONFIG_CONS_INDEX - 1));
71}
72
73#ifdef CONFIG_SPL_BUILD
74void clock_set_pll1(unsigned int clk)
75{
76 struct sunxi_ccm_reg * const ccm =
77 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
78 const int p = 0;
79
80 /* Switch to 24MHz clock while changing PLL1 */
81 writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
82 AXI_DIV_2 << AXI1_DIV_SHIFT |
83 CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
84 CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
85 &ccm->cpu_axi_cfg);
86
87 /* clk = 24*n/p, p is ignored if clock is >288MHz */
88 writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
89 CCM_PLL1_CTRL_N(clk / 24000000),
90 &ccm->pll1_c0_cfg);
91 while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
92
93 writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
94 CCM_PLL1_CTRL_N(clk / (24000000)),
95 &ccm->pll1_c1_cfg);
96 while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
97
98 /* Switch CPU to PLL1 */
99 writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
100 AXI_DIV_2 << AXI1_DIV_SHIFT |
101 CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
102 CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
103 &ccm->cpu_axi_cfg);
104}
105#endif
106
107void clock_set_pll5(unsigned int clk)
108{
109 struct sunxi_ccm_reg * const ccm =
110 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
111 unsigned int div1 = 0, div2 = 0;
112
113 /* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
114 writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
115 CCM_PLL5_CTRL_N(clk / (24000000)) |
116 div2 << CCM_PLL5_DIV2_SHIFT |
117 div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
118
119 udelay(5500);
120}
121
122
123unsigned int clock_get_pll6(void)
124{
125 struct sunxi_ccm_reg *const ccm =
126 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
127
128 uint32_t rval = readl(&ccm->pll6_cfg);
129 int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
130 int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
131 CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
132 int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
133 CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
134 return 24000000 * n / div1 / div2;
135}