Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 1 | /* |
| 2 | * GPIO Abstraction Layer |
| 3 | * |
| 4 | * Copyright 2006-2010 Analog Devices Inc. |
| 5 | * |
| 6 | * Licensed under the GPL-2 or later |
| 7 | */ |
| 8 | |
| 9 | #include <common.h> |
| 10 | #include <asm/errno.h> |
| 11 | #include <asm/gpio.h> |
| 12 | #include <asm/portmux.h> |
| 13 | |
| 14 | #if ANOMALY_05000311 || ANOMALY_05000323 |
| 15 | enum { |
| 16 | AWA_data = SYSCR, |
| 17 | AWA_data_clear = SYSCR, |
| 18 | AWA_data_set = SYSCR, |
| 19 | AWA_toggle = SYSCR, |
| 20 | AWA_maska = UART_SCR, |
| 21 | AWA_maska_clear = UART_SCR, |
| 22 | AWA_maska_set = UART_SCR, |
| 23 | AWA_maska_toggle = UART_SCR, |
| 24 | AWA_maskb = UART_GCTL, |
| 25 | AWA_maskb_clear = UART_GCTL, |
| 26 | AWA_maskb_set = UART_GCTL, |
| 27 | AWA_maskb_toggle = UART_GCTL, |
| 28 | AWA_dir = SPORT1_STAT, |
| 29 | AWA_polar = SPORT1_STAT, |
| 30 | AWA_edge = SPORT1_STAT, |
| 31 | AWA_both = SPORT1_STAT, |
| 32 | #if ANOMALY_05000311 |
| 33 | AWA_inen = TIMER_ENABLE, |
| 34 | #elif ANOMALY_05000323 |
| 35 | AWA_inen = DMA1_1_CONFIG, |
| 36 | #endif |
| 37 | }; |
| 38 | /* Anomaly Workaround */ |
| 39 | #define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) |
| 40 | #else |
| 41 | #define AWA_DUMMY_READ(...) do { } while (0) |
| 42 | #endif |
| 43 | |
| 44 | static struct gpio_port_t * const gpio_array[] = { |
| 45 | #if defined(BF533_FAMILY) |
| 46 | (struct gpio_port_t *) FIO_FLAG_D, |
| 47 | #elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \ |
Mike Frysinger | cca0741 | 2010-12-17 15:25:09 -0500 | [diff] [blame] | 48 | || defined(BF538_FAMILY) || defined(CONFIG_BF50x) |
Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 49 | (struct gpio_port_t *) PORTFIO, |
| 50 | # if !defined(BF538_FAMILY) |
| 51 | (struct gpio_port_t *) PORTGIO, |
| 52 | (struct gpio_port_t *) PORTHIO, |
| 53 | # endif |
| 54 | #elif defined(BF561_FAMILY) |
| 55 | (struct gpio_port_t *) FIO0_FLAG_D, |
| 56 | (struct gpio_port_t *) FIO1_FLAG_D, |
| 57 | (struct gpio_port_t *) FIO2_FLAG_D, |
| 58 | #elif defined(CONFIG_BF54x) |
| 59 | (struct gpio_port_t *)PORTA_FER, |
| 60 | (struct gpio_port_t *)PORTB_FER, |
| 61 | (struct gpio_port_t *)PORTC_FER, |
| 62 | (struct gpio_port_t *)PORTD_FER, |
| 63 | (struct gpio_port_t *)PORTE_FER, |
| 64 | (struct gpio_port_t *)PORTF_FER, |
| 65 | (struct gpio_port_t *)PORTG_FER, |
| 66 | (struct gpio_port_t *)PORTH_FER, |
| 67 | (struct gpio_port_t *)PORTI_FER, |
| 68 | (struct gpio_port_t *)PORTJ_FER, |
| 69 | #else |
| 70 | # error no gpio arrays defined |
| 71 | #endif |
| 72 | }; |
| 73 | |
Mike Frysinger | cca0741 | 2010-12-17 15:25:09 -0500 | [diff] [blame] | 74 | #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \ |
| 75 | defined(CONFIG_BF50x) |
Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 76 | static unsigned short * const port_fer[] = { |
| 77 | (unsigned short *) PORTF_FER, |
| 78 | (unsigned short *) PORTG_FER, |
| 79 | (unsigned short *) PORTH_FER, |
| 80 | }; |
| 81 | |
| 82 | # if !defined(BF537_FAMILY) |
| 83 | static unsigned short * const port_mux[] = { |
| 84 | (unsigned short *) PORTF_MUX, |
| 85 | (unsigned short *) PORTG_MUX, |
| 86 | (unsigned short *) PORTH_MUX, |
| 87 | }; |
| 88 | |
| 89 | static const |
| 90 | u8 pmux_offset[][16] = { |
| 91 | # if defined(CONFIG_BF52x) |
| 92 | { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ |
| 93 | { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ |
| 94 | { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ |
| 95 | # elif defined(CONFIG_BF51x) |
| 96 | { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ |
| 97 | { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ |
| 98 | { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ |
| 99 | # endif |
| 100 | }; |
| 101 | # endif |
| 102 | |
| 103 | #elif defined(BF538_FAMILY) |
| 104 | static unsigned short * const port_fer[] = { |
| 105 | (unsigned short *) PORTCIO_FER, |
| 106 | (unsigned short *) PORTDIO_FER, |
| 107 | (unsigned short *) PORTEIO_FER, |
| 108 | }; |
| 109 | #endif |
| 110 | |
| 111 | #ifdef CONFIG_BFIN_GPIO_TRACK |
| 112 | #define RESOURCE_LABEL_SIZE 16 |
| 113 | |
| 114 | static struct str_ident { |
| 115 | char name[RESOURCE_LABEL_SIZE]; |
| 116 | } str_ident[MAX_RESOURCES]; |
| 117 | |
| 118 | static void gpio_error(unsigned gpio) |
| 119 | { |
| 120 | printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio); |
| 121 | } |
| 122 | |
| 123 | static void set_label(unsigned short ident, const char *label) |
| 124 | { |
| 125 | if (label) { |
| 126 | strncpy(str_ident[ident].name, label, |
| 127 | RESOURCE_LABEL_SIZE); |
| 128 | str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; |
| 129 | } |
| 130 | } |
| 131 | |
| 132 | static char *get_label(unsigned short ident) |
| 133 | { |
| 134 | return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); |
| 135 | } |
| 136 | |
| 137 | static int cmp_label(unsigned short ident, const char *label) |
| 138 | { |
| 139 | if (label == NULL) |
| 140 | printf("bfin-gpio: please provide none-null label\n"); |
| 141 | |
| 142 | if (label) |
| 143 | return strcmp(str_ident[ident].name, label); |
| 144 | else |
| 145 | return -EINVAL; |
| 146 | } |
| 147 | |
| 148 | #define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] |
| 149 | #define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) |
| 150 | #define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) |
| 151 | #define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) |
| 152 | #define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c] |
| 153 | #else |
| 154 | #define is_reserved(m, i, e) (!(e)) |
| 155 | #define reserve(m, i) |
| 156 | #define unreserve(m, i) |
| 157 | #define DECLARE_RESERVED_MAP(m, c) |
| 158 | #define gpio_error(gpio) |
| 159 | #define set_label(...) |
| 160 | #define get_label(...) "" |
| 161 | #define cmp_label(...) 1 |
| 162 | #endif |
| 163 | |
| 164 | DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); |
| 165 | DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES)); |
| 166 | |
| 167 | inline int check_gpio(unsigned gpio) |
| 168 | { |
| 169 | #if defined(CONFIG_BF54x) |
| 170 | if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 |
| 171 | || gpio == GPIO_PH14 || gpio == GPIO_PH15 |
| 172 | || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) |
| 173 | return -EINVAL; |
| 174 | #endif |
| 175 | if (gpio >= MAX_BLACKFIN_GPIOS) |
| 176 | return -EINVAL; |
| 177 | return 0; |
| 178 | } |
| 179 | |
| 180 | static void port_setup(unsigned gpio, unsigned short usage) |
| 181 | { |
| 182 | #if defined(BF538_FAMILY) |
| 183 | /* |
| 184 | * BF538/9 Port C,D and E are special. |
| 185 | * Inverted PORT_FER polarity on CDE and no PORF_FER on F |
| 186 | * Regular PORT F GPIOs are handled here, CDE are exclusively |
| 187 | * managed by GPIOLIB |
| 188 | */ |
| 189 | |
| 190 | if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES) |
| 191 | return; |
| 192 | |
| 193 | gpio -= MAX_BLACKFIN_GPIOS; |
| 194 | |
| 195 | if (usage == GPIO_USAGE) |
| 196 | *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); |
| 197 | else |
| 198 | *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| 199 | SSYNC(); |
| 200 | return; |
| 201 | #endif |
| 202 | |
| 203 | if (check_gpio(gpio)) |
| 204 | return; |
| 205 | |
Mike Frysinger | cca0741 | 2010-12-17 15:25:09 -0500 | [diff] [blame] | 206 | #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \ |
| 207 | defined(CONFIG_BF50x) |
Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 208 | if (usage == GPIO_USAGE) |
| 209 | *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| 210 | else |
| 211 | *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); |
| 212 | SSYNC(); |
| 213 | #elif defined(CONFIG_BF54x) |
| 214 | if (usage == GPIO_USAGE) |
| 215 | gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); |
| 216 | else |
| 217 | gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); |
| 218 | SSYNC(); |
| 219 | #endif |
| 220 | } |
| 221 | |
| 222 | #ifdef BF537_FAMILY |
| 223 | static struct { |
| 224 | unsigned short res; |
| 225 | unsigned short offset; |
| 226 | } port_mux_lut[] = { |
| 227 | {.res = P_PPI0_D13, .offset = 11}, |
| 228 | {.res = P_PPI0_D14, .offset = 11}, |
| 229 | {.res = P_PPI0_D15, .offset = 11}, |
| 230 | {.res = P_SPORT1_TFS, .offset = 11}, |
| 231 | {.res = P_SPORT1_TSCLK, .offset = 11}, |
| 232 | {.res = P_SPORT1_DTPRI, .offset = 11}, |
| 233 | {.res = P_PPI0_D10, .offset = 10}, |
| 234 | {.res = P_PPI0_D11, .offset = 10}, |
| 235 | {.res = P_PPI0_D12, .offset = 10}, |
| 236 | {.res = P_SPORT1_RSCLK, .offset = 10}, |
| 237 | {.res = P_SPORT1_RFS, .offset = 10}, |
| 238 | {.res = P_SPORT1_DRPRI, .offset = 10}, |
| 239 | {.res = P_PPI0_D8, .offset = 9}, |
| 240 | {.res = P_PPI0_D9, .offset = 9}, |
| 241 | {.res = P_SPORT1_DRSEC, .offset = 9}, |
| 242 | {.res = P_SPORT1_DTSEC, .offset = 9}, |
| 243 | {.res = P_TMR2, .offset = 8}, |
| 244 | {.res = P_PPI0_FS3, .offset = 8}, |
| 245 | {.res = P_TMR3, .offset = 7}, |
| 246 | {.res = P_SPI0_SSEL4, .offset = 7}, |
| 247 | {.res = P_TMR4, .offset = 6}, |
| 248 | {.res = P_SPI0_SSEL5, .offset = 6}, |
| 249 | {.res = P_TMR5, .offset = 5}, |
| 250 | {.res = P_SPI0_SSEL6, .offset = 5}, |
| 251 | {.res = P_UART1_RX, .offset = 4}, |
| 252 | {.res = P_UART1_TX, .offset = 4}, |
| 253 | {.res = P_TMR6, .offset = 4}, |
| 254 | {.res = P_TMR7, .offset = 4}, |
| 255 | {.res = P_UART0_RX, .offset = 3}, |
| 256 | {.res = P_UART0_TX, .offset = 3}, |
| 257 | {.res = P_DMAR0, .offset = 3}, |
| 258 | {.res = P_DMAR1, .offset = 3}, |
| 259 | {.res = P_SPORT0_DTSEC, .offset = 1}, |
| 260 | {.res = P_SPORT0_DRSEC, .offset = 1}, |
| 261 | {.res = P_CAN0_RX, .offset = 1}, |
| 262 | {.res = P_CAN0_TX, .offset = 1}, |
| 263 | {.res = P_SPI0_SSEL7, .offset = 1}, |
| 264 | {.res = P_SPORT0_TFS, .offset = 0}, |
| 265 | {.res = P_SPORT0_DTPRI, .offset = 0}, |
| 266 | {.res = P_SPI0_SSEL2, .offset = 0}, |
| 267 | {.res = P_SPI0_SSEL3, .offset = 0}, |
| 268 | }; |
| 269 | |
| 270 | static void portmux_setup(unsigned short per) |
| 271 | { |
| 272 | u16 y, offset, muxreg; |
| 273 | u16 function = P_FUNCT2MUX(per); |
| 274 | |
| 275 | for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { |
| 276 | if (port_mux_lut[y].res == per) { |
| 277 | |
| 278 | /* SET PORTMUX REG */ |
| 279 | |
| 280 | offset = port_mux_lut[y].offset; |
| 281 | muxreg = bfin_read_PORT_MUX(); |
| 282 | |
| 283 | if (offset != 1) |
| 284 | muxreg &= ~(1 << offset); |
| 285 | else |
| 286 | muxreg &= ~(3 << 1); |
| 287 | |
| 288 | muxreg |= (function << offset); |
| 289 | bfin_write_PORT_MUX(muxreg); |
| 290 | } |
| 291 | } |
| 292 | } |
| 293 | #elif defined(CONFIG_BF54x) |
| 294 | inline void portmux_setup(unsigned short per) |
| 295 | { |
| 296 | u32 pmux; |
| 297 | u16 ident = P_IDENT(per); |
| 298 | u16 function = P_FUNCT2MUX(per); |
| 299 | |
| 300 | pmux = gpio_array[gpio_bank(ident)]->port_mux; |
| 301 | |
| 302 | pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); |
| 303 | pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); |
| 304 | |
| 305 | gpio_array[gpio_bank(ident)]->port_mux = pmux; |
| 306 | } |
| 307 | |
| 308 | inline u16 get_portmux(unsigned short per) |
| 309 | { |
| 310 | u32 pmux; |
| 311 | u16 ident = P_IDENT(per); |
| 312 | |
| 313 | pmux = gpio_array[gpio_bank(ident)]->port_mux; |
| 314 | |
| 315 | return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); |
| 316 | } |
| 317 | #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) |
| 318 | inline void portmux_setup(unsigned short per) |
| 319 | { |
| 320 | u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); |
| 321 | u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; |
| 322 | |
| 323 | pmux = *port_mux[gpio_bank(ident)]; |
| 324 | pmux &= ~(3 << offset); |
| 325 | pmux |= (function & 3) << offset; |
| 326 | *port_mux[gpio_bank(ident)] = pmux; |
| 327 | SSYNC(); |
| 328 | } |
| 329 | #else |
| 330 | # define portmux_setup(...) do { } while (0) |
| 331 | #endif |
| 332 | |
| 333 | #ifndef CONFIG_BF54x |
| 334 | /*********************************************************** |
| 335 | * |
| 336 | * FUNCTIONS: Blackfin General Purpose Ports Access Functions |
| 337 | * |
| 338 | * INPUTS/OUTPUTS: |
| 339 | * gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS |
| 340 | * |
| 341 | * |
| 342 | * DESCRIPTION: These functions abstract direct register access |
| 343 | * to Blackfin processor General Purpose |
| 344 | * Ports Regsiters |
| 345 | * |
| 346 | * CAUTION: These functions do not belong to the GPIO Driver API |
| 347 | ************************************************************* |
| 348 | * MODIFICATION HISTORY : |
| 349 | **************************************************************/ |
| 350 | |
| 351 | /* Set a specific bit */ |
| 352 | |
| 353 | #define SET_GPIO(name) \ |
| 354 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
| 355 | { \ |
| 356 | unsigned long flags; \ |
| 357 | local_irq_save(flags); \ |
| 358 | if (arg) \ |
| 359 | gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ |
| 360 | else \ |
| 361 | gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ |
| 362 | AWA_DUMMY_READ(name); \ |
| 363 | local_irq_restore(flags); \ |
| 364 | } |
| 365 | |
| 366 | SET_GPIO(dir) /* set_gpio_dir() */ |
| 367 | SET_GPIO(inen) /* set_gpio_inen() */ |
| 368 | SET_GPIO(polar) /* set_gpio_polar() */ |
| 369 | SET_GPIO(edge) /* set_gpio_edge() */ |
| 370 | SET_GPIO(both) /* set_gpio_both() */ |
| 371 | |
| 372 | |
| 373 | #define SET_GPIO_SC(name) \ |
| 374 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
| 375 | { \ |
| 376 | unsigned long flags; \ |
| 377 | if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| 378 | local_irq_save(flags); \ |
| 379 | if (arg) \ |
| 380 | gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ |
| 381 | else \ |
| 382 | gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ |
| 383 | if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| 384 | AWA_DUMMY_READ(name); \ |
| 385 | local_irq_restore(flags); \ |
| 386 | } \ |
| 387 | } |
| 388 | |
| 389 | SET_GPIO_SC(maska) |
| 390 | SET_GPIO_SC(maskb) |
| 391 | SET_GPIO_SC(data) |
| 392 | |
| 393 | void set_gpio_toggle(unsigned gpio) |
| 394 | { |
| 395 | unsigned long flags; |
| 396 | if (ANOMALY_05000311 || ANOMALY_05000323) |
| 397 | local_irq_save(flags); |
| 398 | gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); |
| 399 | if (ANOMALY_05000311 || ANOMALY_05000323) { |
| 400 | AWA_DUMMY_READ(toggle); |
| 401 | local_irq_restore(flags); |
| 402 | } |
| 403 | } |
| 404 | |
| 405 | /* Set current PORT date (16-bit word) */ |
| 406 | |
| 407 | #define SET_GPIO_P(name) \ |
| 408 | void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ |
| 409 | { \ |
| 410 | unsigned long flags; \ |
| 411 | if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| 412 | local_irq_save(flags); \ |
| 413 | gpio_array[gpio_bank(gpio)]->name = arg; \ |
| 414 | if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| 415 | AWA_DUMMY_READ(name); \ |
| 416 | local_irq_restore(flags); \ |
| 417 | } \ |
| 418 | } |
| 419 | |
| 420 | SET_GPIO_P(data) |
| 421 | SET_GPIO_P(dir) |
| 422 | SET_GPIO_P(inen) |
| 423 | SET_GPIO_P(polar) |
| 424 | SET_GPIO_P(edge) |
| 425 | SET_GPIO_P(both) |
| 426 | SET_GPIO_P(maska) |
| 427 | SET_GPIO_P(maskb) |
| 428 | |
| 429 | /* Get a specific bit */ |
| 430 | #define GET_GPIO(name) \ |
| 431 | unsigned short get_gpio_ ## name(unsigned gpio) \ |
| 432 | { \ |
| 433 | unsigned long flags; \ |
| 434 | unsigned short ret; \ |
| 435 | if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| 436 | local_irq_save(flags); \ |
| 437 | ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ |
| 438 | if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| 439 | AWA_DUMMY_READ(name); \ |
| 440 | local_irq_restore(flags); \ |
| 441 | } \ |
| 442 | return ret; \ |
| 443 | } |
| 444 | |
| 445 | GET_GPIO(data) |
| 446 | GET_GPIO(dir) |
| 447 | GET_GPIO(inen) |
| 448 | GET_GPIO(polar) |
| 449 | GET_GPIO(edge) |
| 450 | GET_GPIO(both) |
| 451 | GET_GPIO(maska) |
| 452 | GET_GPIO(maskb) |
| 453 | |
| 454 | /* Get current PORT date (16-bit word) */ |
| 455 | |
| 456 | #define GET_GPIO_P(name) \ |
| 457 | unsigned short get_gpiop_ ## name(unsigned gpio) \ |
| 458 | { \ |
| 459 | unsigned long flags; \ |
| 460 | unsigned short ret; \ |
| 461 | if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| 462 | local_irq_save(flags); \ |
| 463 | ret = (gpio_array[gpio_bank(gpio)]->name); \ |
| 464 | if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| 465 | AWA_DUMMY_READ(name); \ |
| 466 | local_irq_restore(flags); \ |
| 467 | } \ |
| 468 | return ret; \ |
| 469 | } |
| 470 | |
| 471 | GET_GPIO_P(data) |
| 472 | GET_GPIO_P(dir) |
| 473 | GET_GPIO_P(inen) |
| 474 | GET_GPIO_P(polar) |
| 475 | GET_GPIO_P(edge) |
| 476 | GET_GPIO_P(both) |
| 477 | GET_GPIO_P(maska) |
| 478 | GET_GPIO_P(maskb) |
| 479 | |
| 480 | #else /* CONFIG_BF54x */ |
| 481 | |
| 482 | unsigned short get_gpio_dir(unsigned gpio) |
| 483 | { |
| 484 | return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); |
| 485 | } |
| 486 | |
| 487 | #endif /* CONFIG_BF54x */ |
| 488 | |
| 489 | /*********************************************************** |
| 490 | * |
| 491 | * FUNCTIONS: Blackfin Peripheral Resource Allocation |
| 492 | * and PortMux Setup |
| 493 | * |
| 494 | * INPUTS/OUTPUTS: |
| 495 | * per Peripheral Identifier |
| 496 | * label String |
| 497 | * |
| 498 | * DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API |
| 499 | * |
| 500 | * CAUTION: |
| 501 | ************************************************************* |
| 502 | * MODIFICATION HISTORY : |
| 503 | **************************************************************/ |
| 504 | |
| 505 | int peripheral_request(unsigned short per, const char *label) |
| 506 | { |
| 507 | unsigned short ident = P_IDENT(per); |
| 508 | |
| 509 | /* |
| 510 | * Don't cares are pins with only one dedicated function |
| 511 | */ |
| 512 | |
| 513 | if (per & P_DONTCARE) |
| 514 | return 0; |
| 515 | |
| 516 | if (!(per & P_DEFINED)) |
| 517 | return -ENODEV; |
| 518 | |
| 519 | BUG_ON(ident >= MAX_RESOURCES); |
| 520 | |
| 521 | /* If a pin can be muxed as either GPIO or peripheral, make |
| 522 | * sure it is not already a GPIO pin when we request it. |
| 523 | */ |
| 524 | if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { |
| 525 | printf("%s: Peripheral %d is already reserved as GPIO by %s !\n", |
| 526 | __func__, ident, get_label(ident)); |
| 527 | return -EBUSY; |
| 528 | } |
| 529 | |
| 530 | if (unlikely(is_reserved(peri, ident, 1))) { |
| 531 | |
| 532 | /* |
| 533 | * Pin functions like AMC address strobes my |
| 534 | * be requested and used by several drivers |
| 535 | */ |
| 536 | |
| 537 | #ifdef CONFIG_BF54x |
| 538 | if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { |
| 539 | #else |
| 540 | if (!(per & P_MAYSHARE)) { |
| 541 | #endif |
| 542 | /* |
| 543 | * Allow that the identical pin function can |
| 544 | * be requested from the same driver twice |
| 545 | */ |
| 546 | |
| 547 | if (cmp_label(ident, label) == 0) |
| 548 | goto anyway; |
| 549 | |
| 550 | printf("%s: Peripheral %d function %d is already reserved by %s !\n", |
| 551 | __func__, ident, P_FUNCT2MUX(per), get_label(ident)); |
| 552 | return -EBUSY; |
| 553 | } |
| 554 | } |
| 555 | |
| 556 | anyway: |
| 557 | reserve(peri, ident); |
| 558 | |
| 559 | portmux_setup(per); |
| 560 | port_setup(ident, PERIPHERAL_USAGE); |
| 561 | |
| 562 | set_label(ident, label); |
| 563 | |
| 564 | return 0; |
| 565 | } |
| 566 | |
| 567 | int peripheral_request_list(const unsigned short per[], const char *label) |
| 568 | { |
| 569 | u16 cnt; |
| 570 | int ret; |
| 571 | |
| 572 | for (cnt = 0; per[cnt] != 0; cnt++) { |
| 573 | |
| 574 | ret = peripheral_request(per[cnt], label); |
| 575 | |
| 576 | if (ret < 0) { |
| 577 | for ( ; cnt > 0; cnt--) |
| 578 | peripheral_free(per[cnt - 1]); |
| 579 | |
| 580 | return ret; |
| 581 | } |
| 582 | } |
| 583 | |
| 584 | return 0; |
| 585 | } |
| 586 | |
| 587 | void peripheral_free(unsigned short per) |
| 588 | { |
| 589 | unsigned short ident = P_IDENT(per); |
| 590 | |
| 591 | if (per & P_DONTCARE) |
| 592 | return; |
| 593 | |
| 594 | if (!(per & P_DEFINED)) |
| 595 | return; |
| 596 | |
| 597 | if (unlikely(!is_reserved(peri, ident, 0))) |
| 598 | return; |
| 599 | |
| 600 | if (!(per & P_MAYSHARE)) |
| 601 | port_setup(ident, GPIO_USAGE); |
| 602 | |
| 603 | unreserve(peri, ident); |
| 604 | |
| 605 | set_label(ident, "free"); |
| 606 | } |
| 607 | |
| 608 | void peripheral_free_list(const unsigned short per[]) |
| 609 | { |
| 610 | u16 cnt; |
| 611 | for (cnt = 0; per[cnt] != 0; cnt++) |
| 612 | peripheral_free(per[cnt]); |
| 613 | } |
| 614 | |
| 615 | /*********************************************************** |
| 616 | * |
| 617 | * FUNCTIONS: Blackfin GPIO Driver |
| 618 | * |
| 619 | * INPUTS/OUTPUTS: |
| 620 | * gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS |
| 621 | * label String |
| 622 | * |
| 623 | * DESCRIPTION: Blackfin GPIO Driver API |
| 624 | * |
| 625 | * CAUTION: |
| 626 | ************************************************************* |
| 627 | * MODIFICATION HISTORY : |
| 628 | **************************************************************/ |
| 629 | |
| 630 | int bfin_gpio_request(unsigned gpio, const char *label) |
| 631 | { |
| 632 | if (check_gpio(gpio) < 0) |
| 633 | return -EINVAL; |
| 634 | |
| 635 | /* |
| 636 | * Allow that the identical GPIO can |
| 637 | * be requested from the same driver twice |
| 638 | * Do nothing and return - |
| 639 | */ |
| 640 | |
| 641 | if (cmp_label(gpio, label) == 0) |
| 642 | return 0; |
| 643 | |
| 644 | if (unlikely(is_reserved(gpio, gpio, 1))) { |
| 645 | printf("bfin-gpio: GPIO %d is already reserved by %s !\n", |
| 646 | gpio, get_label(gpio)); |
| 647 | return -EBUSY; |
| 648 | } |
| 649 | if (unlikely(is_reserved(peri, gpio, 1))) { |
| 650 | printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", |
| 651 | gpio, get_label(gpio)); |
| 652 | return -EBUSY; |
| 653 | } |
| 654 | #ifndef CONFIG_BF54x |
| 655 | else { /* Reset POLAR setting when acquiring a gpio for the first time */ |
| 656 | set_gpio_polar(gpio, 0); |
| 657 | } |
| 658 | #endif |
| 659 | |
| 660 | reserve(gpio, gpio); |
| 661 | set_label(gpio, label); |
| 662 | |
| 663 | port_setup(gpio, GPIO_USAGE); |
| 664 | |
| 665 | return 0; |
| 666 | } |
| 667 | |
Mike Frysinger | 95b4b9d | 2011-05-10 12:56:58 -0400 | [diff] [blame] | 668 | #ifdef CONFIG_BFIN_GPIO_TRACK |
Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 669 | void bfin_gpio_free(unsigned gpio) |
| 670 | { |
| 671 | if (check_gpio(gpio) < 0) |
| 672 | return; |
| 673 | |
| 674 | if (unlikely(!is_reserved(gpio, gpio, 0))) { |
| 675 | gpio_error(gpio); |
| 676 | return; |
| 677 | } |
| 678 | |
| 679 | unreserve(gpio, gpio); |
| 680 | |
| 681 | set_label(gpio, "free"); |
| 682 | } |
Mike Frysinger | 95b4b9d | 2011-05-10 12:56:58 -0400 | [diff] [blame] | 683 | #endif |
Mike Frysinger | 4638b21 | 2010-06-02 04:17:26 -0400 | [diff] [blame] | 684 | |
| 685 | #ifdef BFIN_SPECIAL_GPIO_BANKS |
| 686 | DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); |
| 687 | |
| 688 | int bfin_special_gpio_request(unsigned gpio, const char *label) |
| 689 | { |
| 690 | /* |
| 691 | * Allow that the identical GPIO can |
| 692 | * be requested from the same driver twice |
| 693 | * Do nothing and return - |
| 694 | */ |
| 695 | |
| 696 | if (cmp_label(gpio, label) == 0) |
| 697 | return 0; |
| 698 | |
| 699 | if (unlikely(is_reserved(special_gpio, gpio, 1))) { |
| 700 | printf("bfin-gpio: GPIO %d is already reserved by %s !\n", |
| 701 | gpio, get_label(gpio)); |
| 702 | return -EBUSY; |
| 703 | } |
| 704 | if (unlikely(is_reserved(peri, gpio, 1))) { |
| 705 | printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", |
| 706 | gpio, get_label(gpio)); |
| 707 | |
| 708 | return -EBUSY; |
| 709 | } |
| 710 | |
| 711 | reserve(special_gpio, gpio); |
| 712 | reserve(peri, gpio); |
| 713 | |
| 714 | set_label(gpio, label); |
| 715 | port_setup(gpio, GPIO_USAGE); |
| 716 | |
| 717 | return 0; |
| 718 | } |
| 719 | |
| 720 | void bfin_special_gpio_free(unsigned gpio) |
| 721 | { |
| 722 | if (unlikely(!is_reserved(special_gpio, gpio, 0))) { |
| 723 | gpio_error(gpio); |
| 724 | return; |
| 725 | } |
| 726 | |
| 727 | reserve(special_gpio, gpio); |
| 728 | reserve(peri, gpio); |
| 729 | set_label(gpio, "free"); |
| 730 | } |
| 731 | #endif |
| 732 | |
| 733 | static inline void __bfin_gpio_direction_input(unsigned gpio) |
| 734 | { |
| 735 | #ifdef CONFIG_BF54x |
| 736 | gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); |
| 737 | #else |
| 738 | gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); |
| 739 | #endif |
| 740 | gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); |
| 741 | } |
| 742 | |
| 743 | int bfin_gpio_direction_input(unsigned gpio) |
| 744 | { |
| 745 | unsigned long flags; |
| 746 | |
| 747 | if (!is_reserved(gpio, gpio, 0)) { |
| 748 | gpio_error(gpio); |
| 749 | return -EINVAL; |
| 750 | } |
| 751 | |
| 752 | local_irq_save(flags); |
| 753 | __bfin_gpio_direction_input(gpio); |
| 754 | AWA_DUMMY_READ(inen); |
| 755 | local_irq_restore(flags); |
| 756 | |
| 757 | return 0; |
| 758 | } |
| 759 | |
| 760 | void bfin_gpio_toggle_value(unsigned gpio) |
| 761 | { |
| 762 | #ifdef CONFIG_BF54x |
| 763 | gpio_set_value(gpio, !gpio_get_value(gpio)); |
| 764 | #else |
| 765 | gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); |
| 766 | #endif |
| 767 | } |
| 768 | |
| 769 | void bfin_gpio_set_value(unsigned gpio, int arg) |
| 770 | { |
| 771 | if (arg) |
| 772 | gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); |
| 773 | else |
| 774 | gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); |
| 775 | } |
| 776 | |
| 777 | int bfin_gpio_direction_output(unsigned gpio, int value) |
| 778 | { |
| 779 | unsigned long flags; |
| 780 | |
| 781 | if (!is_reserved(gpio, gpio, 0)) { |
| 782 | gpio_error(gpio); |
| 783 | return -EINVAL; |
| 784 | } |
| 785 | |
| 786 | local_irq_save(flags); |
| 787 | |
| 788 | gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); |
| 789 | gpio_set_value(gpio, value); |
| 790 | #ifdef CONFIG_BF54x |
| 791 | gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); |
| 792 | #else |
| 793 | gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); |
| 794 | #endif |
| 795 | |
| 796 | AWA_DUMMY_READ(dir); |
| 797 | local_irq_restore(flags); |
| 798 | |
| 799 | return 0; |
| 800 | } |
| 801 | |
| 802 | int bfin_gpio_get_value(unsigned gpio) |
| 803 | { |
| 804 | #ifdef CONFIG_BF54x |
| 805 | return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); |
| 806 | #else |
| 807 | unsigned long flags; |
| 808 | |
| 809 | if (unlikely(get_gpio_edge(gpio))) { |
| 810 | int ret; |
| 811 | local_irq_save(flags); |
| 812 | set_gpio_edge(gpio, 0); |
| 813 | ret = get_gpio_data(gpio); |
| 814 | set_gpio_edge(gpio, 1); |
| 815 | local_irq_restore(flags); |
| 816 | return ret; |
| 817 | } else |
| 818 | return get_gpio_data(gpio); |
| 819 | #endif |
| 820 | } |
| 821 | |
| 822 | /* If we are booting from SPI and our board lacks a strong enough pull up, |
| 823 | * the core can reset and execute the bootrom faster than the resistor can |
| 824 | * pull the signal logically high. To work around this (common) error in |
| 825 | * board design, we explicitly set the pin back to GPIO mode, force /CS |
| 826 | * high, and wait for the electrons to do their thing. |
| 827 | * |
| 828 | * This function only makes sense to be called from reset code, but it |
| 829 | * lives here as we need to force all the GPIO states w/out going through |
| 830 | * BUG() checks and such. |
| 831 | */ |
| 832 | void bfin_reset_boot_spi_cs(unsigned short pin) |
| 833 | { |
| 834 | unsigned short gpio = P_IDENT(pin); |
| 835 | port_setup(gpio, GPIO_USAGE); |
| 836 | gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); |
| 837 | AWA_DUMMY_READ(data_set); |
| 838 | udelay(1); |
| 839 | } |
| 840 | |
| 841 | #ifdef CONFIG_BFIN_GPIO_TRACK |
| 842 | void bfin_gpio_labels(void) |
| 843 | { |
| 844 | int c, gpio; |
| 845 | |
| 846 | for (c = 0; c < MAX_RESOURCES; c++) { |
| 847 | gpio = is_reserved(gpio, c, 1); |
| 848 | if (!check_gpio(c) && gpio) |
| 849 | printf("GPIO_%d:\t%s\tGPIO %s\n", c, |
| 850 | get_label(c), |
| 851 | get_gpio_dir(c) ? "OUTPUT" : "INPUT"); |
| 852 | else if (is_reserved(peri, c, 1)) |
| 853 | printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c)); |
| 854 | else |
| 855 | continue; |
| 856 | } |
| 857 | } |
| 858 | #endif |