blob: 8ea1ac37d15924e794dbd5224d5af562b167de05 [file] [log] [blame]
stroesea20b27a2004-12-16 18:05:42 +00001/*
2 * (C) Copyright 2001-2004
3 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4 *
Stefan Roese98f4a3d2005-09-22 09:04:17 +02005 * (C) Copyright 2005
6 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 *
Stefan Roese48a05a52006-02-07 16:51:04 +01008 * (C) Copyright 2006
9 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com
10 *
stroesea20b27a2004-12-16 18:05:42 +000011 * See file CREDITS for list of people who contributed to this
12 * project.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 */
29
30/*
31 * board/config.h - configuration options, board specific
32 */
33
34#ifndef __CONFIG_H
35#define __CONFIG_H
36
37/*
38 * High Level Configuration Options
39 * (easy to change)
40 */
41
42#define CONFIG_405EP 1 /* This is a PPC405 CPU */
43#define CONFIG_4xx 1 /* ...member of PPC4xx family */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020044#define CONFIG_HH405 1 /* ...on a HH405 board */
stroesea20b27a2004-12-16 18:05:42 +000045
46#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
47#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
48
49#define CONFIG_SYS_CLK_FREQ 33333400 /* external frequency to pll */
50
51#define CONFIG_BOARD_TYPES 1 /* support board types */
52
53#define CONFIG_BAUDRATE 9600
54#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
55
56#undef CONFIG_BOOTARGS
57#undef CONFIG_BOOTCOMMAND
58
59#define CONFIG_PREBOOT "autoupd"
60
Stefan Roese2c7b2ab2005-09-30 16:41:12 +020061#define CONFIG_EXTRA_ENV_SETTINGS \
62 "pciconfighost=1\0" \
63 ""
64
stroesea20b27a2004-12-16 18:05:42 +000065#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
66
Stefan Roese48a05a52006-02-07 16:51:04 +010067#define CONFIG_NET_MULTI 1
68#undef CONFIG_HAS_ETH1
69
stroesea20b27a2004-12-16 18:05:42 +000070#define CONFIG_MII 1 /* MII PHY management */
Stefan Roese48a05a52006-02-07 16:51:04 +010071#define CONFIG_PHY_ADDR 0 /* PHY address */
stroesea20b27a2004-12-16 18:05:42 +000072#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
Stefan Roese48a05a52006-02-07 16:51:04 +010073#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
stroesea20b27a2004-12-16 18:05:42 +000074
75#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
76
Stefan Roese98f4a3d2005-09-22 09:04:17 +020077/*
78 * Video console
79 */
Stefan Roese2c7b2ab2005-09-30 16:41:12 +020080#define CONFIG_VIDEO /* for sm501 video support */
81
82#ifdef CONFIG_VIDEO
Stefan Roese98f4a3d2005-09-22 09:04:17 +020083#define CONFIG_VIDEO_SM501
84#if 0
85#define CONFIG_VIDEO_SM501_32BPP
86#else
87#define CONFIG_VIDEO_SM501_16BPP
88#endif
Stefan Roese48a05a52006-02-07 16:51:04 +010089#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000
Stefan Roese98f4a3d2005-09-22 09:04:17 +020090#define CONFIG_CFB_CONSOLE
91#define CONFIG_VIDEO_LOGO
92#define CONFIG_VGA_AS_SINGLE_DEVICE
93#define CONFIG_CONSOLE_EXTRA_INFO
94#define CONFIG_VIDEO_SW_CURSOR
95#define CONFIG_SPLASH_SCREEN
96#define CFG_CONSOLE_IS_IN_ENV
97#define CONFIG_SPLASH_SCREEN
98#define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */
Stefan Roesec29ab9d2005-10-08 10:19:07 +020099#define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20) /* for decompressed img */
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200100
Stefan Roese2c7b2ab2005-09-30 16:41:12 +0200101#endif /* CONFIG_VIDEO */
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200102
Jon Loeliger11799432007-07-10 09:02:57 -0500103
104/*
105 * BOOTP options
106 */
107#define CONFIG_BOOTP_BOOTFILESIZE
108#define CONFIG_BOOTP_BOOTPATH
109#define CONFIG_BOOTP_GATEWAY
110#define CONFIG_BOOTP_HOSTNAME
111
112
Jon Loeliger6c4f4da2007-07-08 10:09:35 -0500113/*
114 * Command line configuration.
115 */
116#include <config_cmd_default.h>
117
118#define CONFIG_CMD_DHCP
119#define CONFIG_CMD_PCI
120#define CONFIG_CMD_IRQ
121#define CONFIG_CMD_IDE
122#define CONFIG_CMD_FAT
123#define CONFIG_CMD_EXT2
124#define CONFIG_CMD_ELF
125#define CONFIG_CMD_NAND
126#define CONFIG_CMD_I2C
127#define CONFIG_CMD_DATE
128#define CONFIG_CMD_MII
129#define CONFIG_CMD_PING
Jon Loeliger6c4f4da2007-07-08 10:09:35 -0500130#define CONFIG_CMD_EEPROM
131
Jon Loeliger11799432007-07-10 09:02:57 -0500132#ifdef CONFIG_VIDEO
133#define CONFIG_CMD_BMP
134#endif
stroesea20b27a2004-12-16 18:05:42 +0000135
136#define CONFIG_MAC_PARTITION
137#define CONFIG_DOS_PARTITION
138
139#define CONFIG_SUPPORT_VFAT
140
141#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
142#undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */
143
stroesea20b27a2004-12-16 18:05:42 +0000144#undef CONFIG_BZIP2 /* include support for bzip2 compressed images */
145#undef CONFIG_WATCHDOG /* watchdog disabled */
146
147#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
148
149/*
150 * Miscellaneous configurable options
151 */
152#define CFG_LONGHELP /* undef to save memory */
153#define CFG_PROMPT "=> " /* Monitor Command Prompt */
154
155#undef CFG_HUSH_PARSER /* use "hush" command parser */
156#ifdef CFG_HUSH_PARSER
157#define CFG_PROMPT_HUSH_PS2 "> "
158#endif
159
Jon Loeliger6c4f4da2007-07-08 10:09:35 -0500160#if defined(CONFIG_CMD_KGDB)
stroesea20b27a2004-12-16 18:05:42 +0000161#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
162#else
163#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
164#endif
165#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
166#define CFG_MAXARGS 16 /* max number of command args */
167#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
168
169#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
170
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200171#undef CFG_CONSOLE_INFO_QUIET /* print console @ startup */
stroesea20b27a2004-12-16 18:05:42 +0000172
173#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
174
175#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
176#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
177
178#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
179#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
180#define CFG_BASE_BAUD 691200
181#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
182
183/* The following table includes the supported baudrates */
184#define CFG_BAUDRATE_TABLE \
185 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
186 57600, 115200, 230400, 460800, 921600 }
187
188#define CFG_LOAD_ADDR 0x100000 /* default load address */
189#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
190
191#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
192
193#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
194
195#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
196
197#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
198
199/*-----------------------------------------------------------------------
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200200 * RTC stuff
201 *-----------------------------------------------------------------------
202 */
203#define CONFIG_RTC_DS1338
204#define CFG_I2C_RTC_ADDR 0x68
205
206/*-----------------------------------------------------------------------
stroesea20b27a2004-12-16 18:05:42 +0000207 * NAND-FLASH stuff
208 *-----------------------------------------------------------------------
209 */
Matthias Fuchsbd84ee42007-07-09 10:10:06 +0200210#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
211#define NAND_MAX_CHIPS 1
212#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
213#define NAND_BIG_DELAY_US 25
stroesea20b27a2004-12-16 18:05:42 +0000214
Matthias Fuchsbd84ee42007-07-09 10:10:06 +0200215#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
216#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
217#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
218#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
stroesea20b27a2004-12-16 18:05:42 +0000219
Matthias Fuchsc750d2e2007-09-12 12:36:53 +0200220#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
221#define CFG_NAND_QUIET 1
stroesea20b27a2004-12-16 18:05:42 +0000222
223/*-----------------------------------------------------------------------
224 * PCI stuff
225 *-----------------------------------------------------------------------
226 */
227#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
228#define PCI_HOST_FORCE 1 /* configure as pci host */
229#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
230
231#define CONFIG_PCI /* include pci support */
232#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
233#define CONFIG_PCI_PNP /* do pci plug-and-play */
234 /* resource configuration */
235
236#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
237
238#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
239
240#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
241#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
242#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
243#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
244#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
245#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
246#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
247#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
248#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
249
250/*-----------------------------------------------------------------------
251 * IDE/ATA stuff
252 *-----------------------------------------------------------------------
253 */
254#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
255#undef CONFIG_IDE_LED /* no led for ide supported */
256#define CONFIG_IDE_RESET 1 /* reset for ide supported */
257
258#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
259#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
260
261#define CFG_ATA_BASE_ADDR 0xF0100000
262#define CFG_ATA_IDE0_OFFSET 0x0000
263
264#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
265#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
266#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
267
268/*
269 * For booting Linux, the board info and command line data
270 * have to be in the first 8 MB of memory, since this is
271 * the maximum mapped by the Linux kernel during initialization.
272 */
273#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
274/*-----------------------------------------------------------------------
275 * FLASH organization
276 */
277#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
278
279#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
280#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
281
282#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
283#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
284
285#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
286#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
287#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
288/*
289 * The following defines are added for buggy IOP480 byte interface.
290 * All other boards should use the standard values (CPCI405 etc.)
291 */
292#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
293#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
294#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
295
296#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
297
298#if 0 /* test-only */
299#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
300#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
301#endif
302
303/*-----------------------------------------------------------------------
304 * Start addresses for the final memory configuration
305 * (Set up by the startup code)
306 * Please note that CFG_SDRAM_BASE _must_ start at 0
307 */
308#define CFG_SDRAM_BASE 0x00000000
309#define CFG_FLASH_BASE 0xFFF80000
310#define CFG_MONITOR_BASE TEXT_BASE
311#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
Stefan Roesec29ab9d2005-10-08 10:19:07 +0200312#define CFG_MALLOC_LEN (4 << 20) /* Reserve 4 MB for malloc() */
stroesea20b27a2004-12-16 18:05:42 +0000313
314#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
315# define CFG_RAMBOOT 1
316#else
317# undef CFG_RAMBOOT
318#endif
319
320/*-----------------------------------------------------------------------
321 * Environment Variable setup
322 */
323#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
324#define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
325#define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
326 /* total size of a CAT24WC16 is 2048 bytes */
327
328#define CFG_NVRAM_BASE_ADDR 0xF4080000 /* NVRAM base address */
329#define CFG_NVRAM_SIZE 0x8000 /* NVRAM size */
330
331/*-----------------------------------------------------------------------
332 * I2C EEPROM (CAT24WC16) for environment
333 */
334#define CONFIG_HARD_I2C /* I2c with hardware support */
335#if 0 /* test-only */
336#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
337#else
338#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
339#endif
340#define CFG_I2C_SLAVE 0x7F
341
342#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200343#define CFG_EEPROM_WREN 1
344
stroesea20b27a2004-12-16 18:05:42 +0000345#if 1 /* test-only */
346/* CAT24WC08/16... */
347#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
348/* mask of address bits that overflow into the "EEPROM chip address" */
349#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
350#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
351 /* 16 byte page write mode using*/
352 /* last 4 bits of the address */
353#else
354/* CAT24WC32/64... */
355#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
356/* mask of address bits that overflow into the "EEPROM chip address" */
357#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
358#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
359 /* 32 byte page write mode using*/
360 /* last 5 bits of the address */
361#endif
362#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
363#define CFG_EEPROM_PAGE_WRITE_ENABLE
364
365/*-----------------------------------------------------------------------
stroesea20b27a2004-12-16 18:05:42 +0000366 * External Bus Controller (EBC) Setup
367 */
368
369#define CAN_BA 0xF0000000 /* CAN Base Address */
370#define LCD_BA 0xF1000000 /* Epson LCD Base Address */
371#define CFG_NAND_BASE 0xF4000000 /* NAND FLASH Base Address */
372#define CFG_NVRAM_BASE 0xF4080000 /* NVRAM Base Address */
373
374/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
375#define CFG_EBC_PB0AP 0x92015480
376#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
377
378/* Memory Bank 1 (Flash Bank 1, NAND-FLASH & NVRAM) initialization */
379#define CFG_EBC_PB1AP 0x92015480
380#define CFG_EBC_PB1CR 0xF4018000 /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
381
382/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
383#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
384#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
385
386/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization */
387#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
388#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
389
390/* Memory Bank 4 (Epson LCD) initialization */
391#define CFG_EBC_PB4AP 0x03805380 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
392#define CFG_EBC_PB4CR LCD_BA | 0x7A000 /* BAS=0xF10,BS=8MB,BU=R/W,BW=16bit */
393
394/*-----------------------------------------------------------------------
395 * LCD Setup
396 */
397
398#define CFG_LCD_BIG_MEM 0xF1200000 /* Epson S1D13806 Mem Base Address */
399#define CFG_LCD_BIG_REG 0xF1000000 /* Epson S1D13806 Reg Base Address */
400#define CFG_LCD_SMALL_MEM 0xF1400000 /* Epson S1D13704 Mem Base Address */
401#define CFG_LCD_SMALL_REG 0xF140FFE0 /* Epson S1D13704 Reg Base Address */
402
stroesea20b27a2004-12-16 18:05:42 +0000403/*-----------------------------------------------------------------------
404 * Universal Interrupt Controller (UIC) Setup
405 */
406
407/*
408 * define UIC_EXT0 ... UIC_EXT6 if external interrupt is active high
409 */
410#define CFG_UIC0_POLARITY (0xFFFFFF80 | UIC_EXT6)
411
412/*-----------------------------------------------------------------------
413 * FPGA stuff
414 */
415
416#define CFG_FPGA_BASE_ADDR 0xF0100100 /* FPGA internal Base Address */
417
418/* FPGA internal regs */
419#define CFG_FPGA_CTRL 0x000
420
421/* FPGA Control Reg */
422#define CFG_FPGA_CTRL_REV0 0x0001
423#define CFG_FPGA_CTRL_REV1 0x0002
424#define CFG_FPGA_CTRL_VGA0_BL 0x0004
425#define CFG_FPGA_CTRL_VGA0_BL_MODE 0x0008
426#define CFG_FPGA_CTRL_CF_RESET 0x0040
427#define CFG_FPGA_CTRL_PS2_PWR 0x0080
Stefan Roese48a05a52006-02-07 16:51:04 +0100428#define CFG_FPGA_CTRL_CF_PWRN 0x0100 /* low active */
stroesea20b27a2004-12-16 18:05:42 +0000429#define CFG_FPGA_CTRL_CF_BUS_EN 0x0200
430#define CFG_FPGA_CTRL_LCD_CLK 0x7000 /* Mask for lcd clock */
Stefan Roese48a05a52006-02-07 16:51:04 +0100431#define CFG_FPGA_CTRL_OW_ENABLE 0x8000
432
433#define CFG_FPGA_STATUS_CF_DETECT 0x8000
stroesea20b27a2004-12-16 18:05:42 +0000434
435#define LCD_CLK_OFF 0x0000 /* Off */
436#define LCD_CLK_02083 0x1000 /* 2.083 MHz */
437#define LCD_CLK_03135 0x2000 /* 3.135 MHz */
438#define LCD_CLK_04165 0x3000 /* 4.165 MHz */
439#define LCD_CLK_06250 0x4000 /* 6.250 MHz */
440#define LCD_CLK_08330 0x5000 /* 8.330 MHz */
441#define LCD_CLK_12500 0x6000 /* 12.50 MHz */
442#define LCD_CLK_25000 0x7000 /* 25.00 MHz */
443
444#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
445#define CFG_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S50E*/
446
447/* FPGA program pin configuration */
448#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
449#define CFG_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
450#define CFG_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
451#define CFG_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
452#define CFG_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
453
454/*-----------------------------------------------------------------------
455 * Definitions for initial stack pointer and data area (in data cache)
456 */
457/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
458#define CFG_TEMP_STACK_OCM 1
459
460/* On Chip Memory location */
461#define CFG_OCM_DATA_ADDR 0xF8000000
462#define CFG_OCM_DATA_SIZE 0x1000
463#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
464#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
465
466#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
467#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
468#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
469
470/*-----------------------------------------------------------------------
471 * Definitions for GPIO setup (PPC405EP specific)
472 *
473 * GPIO0[0] - External Bus Controller BLAST output
474 * GPIO0[1-9] - Instruction trace outputs -> GPIO
475 * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
476 * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO
477 * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
478 * GPIO0[24-27] - UART0 control signal inputs/outputs
479 * GPIO0[28-29] - UART1 data signal input/output
480 * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
481 */
482#define CFG_GPIO0_OSRH 0x40000550
483#define CFG_GPIO0_OSRL 0x00000110
484#define CFG_GPIO0_ISR1H 0x00000000
485#define CFG_GPIO0_ISR1L 0x15555440
486#define CFG_GPIO0_TSRH 0x00000000
487#define CFG_GPIO0_TSRL 0x00000000
488#define CFG_GPIO0_TCR 0xF7FE0017
489
490#define CFG_LCD_ENDIAN (0x80000000 >> 7)
Stefan Roese98f4a3d2005-09-22 09:04:17 +0200491#define CFG_EEPROM_WP (0x80000000 >> 8) /* GPIO8 */
492#define CFG_TOUCH_RST (0x80000000 >> 9) /* GPIO9 */
stroesea20b27a2004-12-16 18:05:42 +0000493#define CFG_LCD0_RST (0x80000000 >> 30)
494#define CFG_LCD1_RST (0x80000000 >> 31)
495
496/*
497 * Internal Definitions
498 *
499 * Boot Flags
500 */
501#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
502#define BOOTFLAG_WARM 0x02 /* Software reboot */
503
504/*
505 * Default speed selection (cpu_plb_opb_ebc) in mhz.
506 * This value will be set if iic boot eprom is disabled.
507 */
508#if 0
509#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
510#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
511#endif
512#if 0
513#define PLLMR0_DEFAULT PLLMR0_200_100_50_33
514#define PLLMR1_DEFAULT PLLMR1_200_100_50_33
515#endif
516#if 1
517#define PLLMR0_DEFAULT PLLMR0_133_66_66_33
518#define PLLMR1_DEFAULT PLLMR1_133_66_66_33
519#endif
520
521#endif /* __CONFIG_H */