wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 1 | |
| 2 | This file contains basic information on the port of U-Boot to IPHASE4539 |
| 3 | (Interphase 4539 T1/E1/J1 PMC Communications Controller). |
| 4 | All the changes fit in the common U-Boot infrastructure, providing a new |
| 5 | IPHASE4539-specific entry in makefiles. To build U-Boot for IPHASE4539, |
| 6 | type "make IPHASE4539_config", edit the "include/config_IPHASE4539.h" |
| 7 | file if necessary, then type "make". |
| 8 | |
| 9 | |
| 10 | Common file modifications: |
| 11 | -------------------------- |
| 12 | |
| 13 | The following common files have been modified by this project: |
| 14 | (starting from the ppcboot-1.1.5/ directory) |
| 15 | |
| 16 | MAKEALL - IPHASE4539 entry added |
| 17 | Makefile - IPHASE4539_config entry added |
| 18 | |
| 19 | |
| 20 | New files: |
| 21 | ---------- |
| 22 | |
| 23 | The following new files have been added by this project: |
| 24 | (starting from the ppcboot-1.1.5/ directory) |
| 25 | |
| 26 | board/iphase4539/ - board-specific directory |
| 27 | board/iphase4539/Makefile - board-specific makefile |
| 28 | board/iphase4539/config.mk - config file |
| 29 | board/iphase4539/flash.c - flash driver (for AM29LV033C) |
| 30 | board/iphase4539/ppcboot.lds - linker script |
| 31 | board/iphase4539/iphase4539.c - ioport and memory initialization |
| 32 | include/config_IPHASE4539.h - main configuration file |
| 33 | |
| 34 | |
| 35 | New configuration options: |
| 36 | -------------------------- |
| 37 | |
| 38 | CONFIG_IPHASE4539 |
| 39 | |
| 40 | Main board-specific option (should be defined for IPHASE4539). |
| 41 | |
| 42 | |
| 43 | Acceptance criteria tests: |
| 44 | -------------------------- |
| 45 | |
| 46 | The following tests have been conducted to validate the port of U-Boot |
| 47 | to IPHASE4539: |
| 48 | |
| 49 | 1. Operation on serial console: |
| 50 | |
| 51 | With SMC1 defined as console in the main configuration file, the U-Boot |
| 52 | output appeared on the serial terminal connected to the 2.5mm stereo jack |
| 53 | connector as follows: |
| 54 | |
| 55 | ------------------------------------------------------------------------------ |
| 56 | => help |
wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 57 | base - print or set address offset |
| 58 | bdinfo - print Board Info structure |
| 59 | bootm - boot application image from memory |
| 60 | bootp - boot image via network using BootP/TFTP protocol |
| 61 | bootd - boot default, i.e., run 'bootcmd' |
| 62 | cmp - memory compare |
| 63 | coninfo - print console devices and informations |
| 64 | cp - memory copy |
| 65 | crc32 - checksum calculation |
| 66 | dcache - enable or disable data cache |
| 67 | echo - echo args to console |
| 68 | erase - erase FLASH memory |
| 69 | flinfo - print FLASH memory information |
| 70 | go - start application at address 'addr' |
| 71 | help - print online help |
| 72 | icache - enable or disable instruction cache |
| 73 | iminfo - print header information for application image |
| 74 | loadb - load binary file over serial line (kermit mode) |
| 75 | loads - load S-Record file over serial line |
| 76 | loop - infinite loop on address range |
| 77 | md - memory display |
| 78 | mm - memory modify (auto-incrementing) |
| 79 | mtest - simple RAM test |
| 80 | mw - memory write (fill) |
| 81 | nm - memory modify (constant address) |
| 82 | printenv- print environment variables |
| 83 | protect - enable or disable FLASH write protection |
| 84 | rarpboot- boot image via network using RARP/TFTP protocol |
| 85 | reset - Perform RESET of the CPU |
| 86 | run - run commands in an environment variable |
| 87 | saveenv - save environment variables to persistent storage |
| 88 | setenv - set environment variables |
| 89 | sleep - delay execution for some time |
Peter Tyser | 61c83b7 | 2009-09-16 21:38:10 -0500 | [diff] [blame] | 90 | source - run script from memory |
wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 91 | tftpboot- boot image via network using TFTP protocol |
wdenk | 8bde7f7 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 92 | and env variables ipaddr and serverip |
wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 93 | version - print monitor version |
| 94 | ? - alias for 'help' |
| 95 | => |
| 96 | ------------------------------------------------------------------------------ |
| 97 | |
| 98 | |
| 99 | 2. Flash driver operation |
| 100 | |
| 101 | The following sequence was performed to test the "flinfo" command: |
| 102 | |
| 103 | ------------------------------------------------------------------------------ |
| 104 | => flinfo |
| 105 | |
| 106 | Bank # 1: AMD AM29LV033C (32 Mbit, uniform sectors) |
| 107 | Size: 4 MB in 64 Sectors |
| 108 | Sector Start Addresses: |
| 109 | FF800000 (RO) FF810000 (RO) FF820000 FF830000 FF840000 |
| 110 | FF850000 FF860000 FF870000 FF880000 FF890000 |
| 111 | FF8A0000 FF8B0000 FF8C0000 FF8D0000 FF8E0000 |
| 112 | FF8F0000 FF900000 FF910000 FF920000 FF930000 |
| 113 | FF940000 FF950000 FF960000 FF970000 FF980000 |
| 114 | FF990000 FF9A0000 FF9B0000 FF9C0000 FF9D0000 |
| 115 | FF9E0000 FF9F0000 FFA00000 FFA10000 FFA20000 |
| 116 | FFA30000 FFA40000 FFA50000 FFA60000 FFA70000 |
| 117 | FFA80000 FFA90000 FFAA0000 FFAB0000 FFAC0000 |
| 118 | FFAD0000 FFAE0000 FFAF0000 FFB00000 (RO) FFB10000 (RO) |
| 119 | FFB20000 (RO) FFB30000 (RO) FFB40000 FFB50000 FFB60000 |
| 120 | FFB70000 FFB80000 FFB90000 FFBA0000 FFBB0000 |
| 121 | FFBC0000 FFBD0000 FFBE0000 FFBF0000 |
| 122 | ------------------------------------------------------------------------------ |
| 123 | |
| 124 | Note: the Hardware Configuration Word (HWC) of the 8260 is on the |
| 125 | first sector of the flash and should not be touched. The U-Boot |
| 126 | environment variables are stored on second sector and U-Boot |
| 127 | starts at the address 0xFFB00000. |
| 128 | |
| 129 | |
| 130 | The following sequence was performed to test the erase command: |
| 131 | |
| 132 | ------------------------------------------------------------------------------ |
| 133 | => cp 0 ff880000 10 |
| 134 | Copy to Flash... done |
| 135 | => md ff880000 20 |
| 136 | ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 137 | ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 138 | ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 139 | ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 140 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 141 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 142 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 143 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 144 | => erase ff880000 ff88ffff |
| 145 | Erase Flash from 0xff880000 to 0xff88ffff |
| 146 | .. done |
| 147 | Erased 1 sectors |
| 148 | => md ff880000 |
| 149 | ff880000: ffffffff ffffffff ffffffff ffffffff ................ |
| 150 | ff880010: ffffffff ffffffff ffffffff ffffffff ................ |
| 151 | ff880020: ffffffff ffffffff ffffffff ffffffff ................ |
| 152 | ff880030: ffffffff ffffffff ffffffff ffffffff ................ |
| 153 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 154 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 155 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 156 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 157 | => cp 0 ff880000 10 |
| 158 | Copy to Flash... done |
| 159 | => md ff880000 20 |
| 160 | ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 161 | ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 162 | ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 163 | ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 164 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 165 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 166 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 167 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 168 | => erase 1:8 |
| 169 | Erase Flash Sectors 8-8 in Bank # 1 |
| 170 | .. done |
| 171 | => md ff880000 20 |
| 172 | ff880000: ffffffff ffffffff ffffffff ffffffff ................ |
| 173 | ff880010: ffffffff ffffffff ffffffff ffffffff ................ |
| 174 | ff880020: ffffffff ffffffff ffffffff ffffffff ................ |
| 175 | ff880030: ffffffff ffffffff ffffffff ffffffff ................ |
| 176 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 177 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 178 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 179 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 180 | => cp 0 ff880000 10 |
| 181 | Copy to Flash... done |
| 182 | => cp 0 ff890000 10 |
| 183 | => md ff880000 20 |
| 184 | ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 185 | ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 186 | ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 187 | ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 188 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 189 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 190 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 191 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 192 | => md ff890000 |
| 193 | ff890000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 194 | ff890010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 195 | ff890020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 196 | ff890030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 197 | ff890040: ffffffff ffffffff ffffffff ffffffff ................ |
| 198 | ff890050: ffffffff ffffffff ffffffff ffffffff ................ |
| 199 | ff890060: ffffffff ffffffff ffffffff ffffffff ................ |
| 200 | ff890070: ffffffff ffffffff ffffffff ffffffff ................ |
| 201 | => erase 1:8-9 |
| 202 | Erase Flash Sectors 8-9 in Bank # 1 |
| 203 | .... done |
| 204 | => md ff880000 20 |
| 205 | ff880000: ffffffff ffffffff ffffffff ffffffff ................ |
| 206 | ff880010: ffffffff ffffffff ffffffff ffffffff ................ |
| 207 | ff880020: ffffffff ffffffff ffffffff ffffffff ................ |
| 208 | ff880030: ffffffff ffffffff ffffffff ffffffff ................ |
| 209 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 210 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 211 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 212 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 213 | => md ff890000 |
| 214 | ff890000: ffffffff ffffffff ffffffff ffffffff ................ |
| 215 | ff890010: ffffffff ffffffff ffffffff ffffffff ................ |
| 216 | ff890020: ffffffff ffffffff ffffffff ffffffff ................ |
| 217 | ff890030: ffffffff ffffffff ffffffff ffffffff ................ |
| 218 | ff890040: ffffffff ffffffff ffffffff ffffffff ................ |
| 219 | ff890050: ffffffff ffffffff ffffffff ffffffff ................ |
| 220 | ff890060: ffffffff ffffffff ffffffff ffffffff ................ |
| 221 | ff890070: ffffffff ffffffff ffffffff ffffffff ................ |
| 222 | => |
| 223 | ------------------------------------------------------------------------------ |
| 224 | |
| 225 | |
| 226 | The following sequence was performed to test the Flash programming commands: |
| 227 | |
| 228 | ------------------------------------------------------------------------------ |
| 229 | => erase ff880000 ff88ffff |
| 230 | Erase Flash from 0xff880000 to 0xff88ffff |
| 231 | .. done |
| 232 | Erased 1 sectors |
| 233 | => cp 0 ff880000 10 |
| 234 | Copy to Flash... done |
| 235 | => md 0 20 |
| 236 | 00000000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 237 | 00000010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 238 | 00000020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 239 | 00000030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 240 | 00000040: 3c83c000 2c040000 40823378 7c0000a6 <...,...@.3x|... |
| 241 | 00000050: 60000030 7c1b03a6 3c00c000 600035ec `..0|...<...`.5. |
| 242 | 00000060: 7c1a03a6 4c000064 00000000 00000000 |...L..d........ |
| 243 | 00000070: 00000000 00000000 00000000 00000000 ................ |
| 244 | => md ff880000 20 |
| 245 | ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x |
| 246 | ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x |
| 247 | ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. |
| 248 | ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x |
| 249 | ff880040: ffffffff ffffffff ffffffff ffffffff ................ |
| 250 | ff880050: ffffffff ffffffff ffffffff ffffffff ................ |
| 251 | ff880060: ffffffff ffffffff ffffffff ffffffff ................ |
| 252 | ff880070: ffffffff ffffffff ffffffff ffffffff ................ |
| 253 | => |
| 254 | ------------------------------------------------------------------------------ |
| 255 | |
| 256 | |
| 257 | The following sequence was performed to test storage of the environment |
| 258 | variables in Flash: |
| 259 | |
| 260 | ------------------------------------------------------------------------------ |
| 261 | => setenv foo bar |
| 262 | => saveenv |
| 263 | Un-Protected 1 sectors |
| 264 | Erasing Flash... |
| 265 | .. done |
| 266 | Erased 1 sectors |
| 267 | Saving Environment to Flash... |
| 268 | Protected 1 sectors |
| 269 | => reset |
| 270 | ... |
| 271 | => printenv |
| 272 | ... |
| 273 | foo=bar |
| 274 | ... |
| 275 | Environment size: 339/65532 bytes |
| 276 | => |
| 277 | ------------------------------------------------------------------------------ |
| 278 | |
| 279 | |
| 280 | The following sequence was performed to test image download and run over |
| 281 | Ethernet interface (both interfaces were tested): |
| 282 | |
| 283 | ------------------------------------------------------------------------------ |
| 284 | => tftpboot 40000 hello_world.bin |
| 285 | ARP broadcast 1 |
| 286 | TFTP from server 10.0.0.1; our IP address is 10.0.0.8 |
| 287 | Filename 'hello_world.bin'. |
| 288 | Load address: 0x40000 |
| 289 | Loading: ############# |
| 290 | done |
| 291 | Bytes transferred = 65932 (1018c hex) |
| 292 | => go 40004 |
| 293 | ## Starting application at 0x00040004 ... |
| 294 | Hello World |
| 295 | argc = 1 |
| 296 | argv[0] = "40004" |
| 297 | argv[1] = "<NULL>" |
| 298 | Hit any key to exit ... |
| 299 | |
| 300 | ## Application terminated, rc = 0x0 |
| 301 | => |
| 302 | ------------------------------------------------------------------------------ |
| 303 | |
| 304 | |
| 305 | 3. Known Problems |
| 306 | |
| 307 | None for the moment. |
| 308 | |
| 309 | |
| 310 | ---------------------------------------------------------------------------- |
| 311 | U-Boot and Linux for Interphase 4539 T1/E1/J1 PMC Communications Controller |
| 312 | ---------------------------------------------------------------------------- |
| 313 | |
| 314 | U-Boot: |
| 315 | |
| 316 | Configure and make U-Boot: |
| 317 | |
| 318 | $ cd <path>/u-boot |
| 319 | $ make IPHASE4539_config |
| 320 | $ make dep |
| 321 | $ make |
| 322 | $ cp -p u-boot.bin /tftpboot |
| 323 | |
| 324 | Load u-boot.bin into the Flash memory at 0xffb00000. |
| 325 | |
| 326 | |
| 327 | Linux: |
| 328 | |
| 329 | Configure and make Linux: |
| 330 | |
| 331 | $ cd <patch>/linux-2.4 |
| 332 | $ make IPHASE4539_config |
| 333 | $ make oldconfig |
| 334 | $ make dep |
wdenk | 3bac351 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 335 | $ make uImage |
| 336 | $ cp -p arch/ppc/mbxboot/uImage /tftpboot |
wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 337 | |
wdenk | 3bac351 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 338 | Load uImage via tftp and boot it. |
wdenk | 5b1d713 | 2002-11-03 00:07:02 +0000 | [diff] [blame] | 339 | |
| 340 | |
| 341 | Flash organisation: |
| 342 | |
| 343 | The following preliminary layout of the Flash memory |
| 344 | is defined: |
| 345 | |
| 346 | 0xff800000 ( 0 - 64 kB): Hardware Configuration Word. |
| 347 | 0xff810000 ( 64 kB - 128 kB): U-Boot Environment. |
| 348 | 0xff820000 ( 128 kB - 3 MB): RAMdisk. |
| 349 | 0xffb00000 ( 3 MB - 3328 kB): U-Boot. |
| 350 | 0xffb40000 (3328 KB - 4 MB): Linux Kernel. |
| 351 | |
| 352 | |
| 353 | For further information concerning U-Boot and Linux please consult |
| 354 | the "DENX U-Boot and Linux Guide". |
| 355 | |
| 356 | |
| 357 | (C) 2002 Wolfgang Grandegger, DENX Software Engineering, wg@denx.de |
| 358 | =================================================================== |