blob: 462e62c7c20442e328a45fc1395b83d6d263f49c [file] [log] [blame]
Chris Packhama6477f72018-06-25 22:34:57 +12001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
4 */
5
6#ifndef _CONFIG_SBX81LIFXCAT_H
7#define _CONFIG_SBX81LIFXCAT_H
8
9/*
10 * High Level Configuration Options (easy to change)
11 */
12#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
13#define CONFIG_KW88F6281 1 /* SOC Name */
14#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
15#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
Chris Packhama6477f72018-06-25 22:34:57 +120016
17/* additions for new ARM relocation support */
18#define CONFIG_SYS_SDRAM_BASE 0x00000000
19
20#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
21#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
22#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
23#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
24#define CONFIG_KIRKWOOD_GPIO 1
25
Chris Packhama6477f72018-06-25 22:34:57 +120026/*
27 * NS16550 Configuration
28 */
29#define CONFIG_SYS_NS16550
30#define CONFIG_SYS_NS16550_SERIAL
31#define CONFIG_SYS_NS16550_REG_SIZE (-4)
32#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
33#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
34
35/*
36 * Serial Port configuration
37 * The following definitions let you select what serial you want to use
38 * for your console driver.
39 */
40
41#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
42
43/*
44 * For booting Linux, the board info and command line data
45 * have to be in the first 8 MB of memory, since this is
46 * the maximum mapped by the Linux kernel during initialization.
47 */
48#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
49#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
50#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
51
52#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
53#define MTDPARTS_MTDOOPS "errlog"
54#define CONFIG_DOS_PARTITION
55
56/*
57 * Environment variables configurations
58 */
Chris Packhama6477f72018-06-25 22:34:57 +120059
60/*
61 * U-Boot bootcode configuration
62 */
63
64#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
65#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */
66
67/*
68 * For booting Linux, the board info and command line data
69 * have to be in the first 8 MB of memory, since this is
70 * the maximum mapped by the Linux kernel during initialization.
71 */
72#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
73
74/* size in bytes reserved for initial data */
75
76#include <asm/arch/config.h>
77/* There is no PHY directly connected so don't ask it for link status */
78#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
79
80/*
81 * Other required minimal configurations
82 */
Chris Packhama6477f72018-06-25 22:34:57 +120083#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
84#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
85#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
86
87/*
88 * Ethernet Driver configuration
89 */
90#ifdef CONFIG_CMD_NET
91#define CONFIG_NETCONSOLE /* include NetConsole support */
92#define CONFIG_NET_MULTI /* specify more that one ports available */
Chris Packhama6477f72018-06-25 22:34:57 +120093#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
94#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
95#define CONFIG_PHY_BASE_ADR 0x01
96#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
97#endif /* CONFIG_CMD_NET */
98
99#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
100
101#endif /* _CONFIG_SBX81LIFXCAT_H */