Stefan Roese | 9eefe2a | 2009-03-19 15:35:05 +0100 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of UBIFS. |
| 3 | * |
| 4 | * Copyright (C) 2006-2008 Nokia Corporation. |
| 5 | * Copyright (C) 2006, 2007 University of Szeged, Hungary |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 14 | * more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License along with |
| 17 | * this program; if not, write to the Free Software Foundation, Inc., 51 |
| 18 | * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 19 | * |
| 20 | * Authors: Artem Bityutskiy (Битюцкий Артём) |
| 21 | * Adrian Hunter |
| 22 | * Zoltan Sogor |
| 23 | */ |
| 24 | |
| 25 | /* |
| 26 | * This file implements UBIFS I/O subsystem which provides various I/O-related |
| 27 | * helper functions (reading/writing/checking/validating nodes) and implements |
| 28 | * write-buffering support. Write buffers help to save space which otherwise |
| 29 | * would have been wasted for padding to the nearest minimal I/O unit boundary. |
| 30 | * Instead, data first goes to the write-buffer and is flushed when the |
| 31 | * buffer is full or when it is not used for some time (by timer). This is |
| 32 | * similar to the mechanism is used by JFFS2. |
| 33 | * |
| 34 | * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by |
| 35 | * mutexes defined inside these objects. Since sometimes upper-level code |
| 36 | * has to lock the write-buffer (e.g. journal space reservation code), many |
| 37 | * functions related to write-buffers have "nolock" suffix which means that the |
| 38 | * caller has to lock the write-buffer before calling this function. |
| 39 | * |
| 40 | * UBIFS stores nodes at 64 bit-aligned addresses. If the node length is not |
| 41 | * aligned, UBIFS starts the next node from the aligned address, and the padded |
| 42 | * bytes may contain any rubbish. In other words, UBIFS does not put padding |
| 43 | * bytes in those small gaps. Common headers of nodes store real node lengths, |
| 44 | * not aligned lengths. Indexing nodes also store real lengths in branches. |
| 45 | * |
| 46 | * UBIFS uses padding when it pads to the next min. I/O unit. In this case it |
| 47 | * uses padding nodes or padding bytes, if the padding node does not fit. |
| 48 | * |
| 49 | * All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes |
| 50 | * every time they are read from the flash media. |
| 51 | */ |
| 52 | |
| 53 | #include "ubifs.h" |
| 54 | |
| 55 | /** |
| 56 | * ubifs_ro_mode - switch UBIFS to read read-only mode. |
| 57 | * @c: UBIFS file-system description object |
| 58 | * @err: error code which is the reason of switching to R/O mode |
| 59 | */ |
| 60 | void ubifs_ro_mode(struct ubifs_info *c, int err) |
| 61 | { |
| 62 | if (!c->ro_media) { |
| 63 | c->ro_media = 1; |
| 64 | c->no_chk_data_crc = 0; |
| 65 | ubifs_warn("switched to read-only mode, error %d", err); |
| 66 | dbg_dump_stack(); |
| 67 | } |
| 68 | } |
| 69 | |
| 70 | /** |
| 71 | * ubifs_check_node - check node. |
| 72 | * @c: UBIFS file-system description object |
| 73 | * @buf: node to check |
| 74 | * @lnum: logical eraseblock number |
| 75 | * @offs: offset within the logical eraseblock |
| 76 | * @quiet: print no messages |
| 77 | * @must_chk_crc: indicates whether to always check the CRC |
| 78 | * |
| 79 | * This function checks node magic number and CRC checksum. This function also |
| 80 | * validates node length to prevent UBIFS from becoming crazy when an attacker |
| 81 | * feeds it a file-system image with incorrect nodes. For example, too large |
| 82 | * node length in the common header could cause UBIFS to read memory outside of |
| 83 | * allocated buffer when checking the CRC checksum. |
| 84 | * |
| 85 | * This function may skip data nodes CRC checking if @c->no_chk_data_crc is |
| 86 | * true, which is controlled by corresponding UBIFS mount option. However, if |
| 87 | * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is |
| 88 | * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is |
| 89 | * ignored and CRC is checked. |
| 90 | * |
| 91 | * This function returns zero in case of success and %-EUCLEAN in case of bad |
| 92 | * CRC or magic. |
| 93 | */ |
| 94 | int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum, |
| 95 | int offs, int quiet, int must_chk_crc) |
| 96 | { |
| 97 | int err = -EINVAL, type, node_len; |
| 98 | uint32_t crc, node_crc, magic; |
| 99 | const struct ubifs_ch *ch = buf; |
| 100 | |
| 101 | ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| 102 | ubifs_assert(!(offs & 7) && offs < c->leb_size); |
| 103 | |
| 104 | magic = le32_to_cpu(ch->magic); |
| 105 | if (magic != UBIFS_NODE_MAGIC) { |
| 106 | if (!quiet) |
| 107 | ubifs_err("bad magic %#08x, expected %#08x", |
| 108 | magic, UBIFS_NODE_MAGIC); |
| 109 | err = -EUCLEAN; |
| 110 | goto out; |
| 111 | } |
| 112 | |
| 113 | type = ch->node_type; |
| 114 | if (type < 0 || type >= UBIFS_NODE_TYPES_CNT) { |
| 115 | if (!quiet) |
| 116 | ubifs_err("bad node type %d", type); |
| 117 | goto out; |
| 118 | } |
| 119 | |
| 120 | node_len = le32_to_cpu(ch->len); |
| 121 | if (node_len + offs > c->leb_size) |
| 122 | goto out_len; |
| 123 | |
| 124 | if (c->ranges[type].max_len == 0) { |
| 125 | if (node_len != c->ranges[type].len) |
| 126 | goto out_len; |
| 127 | } else if (node_len < c->ranges[type].min_len || |
| 128 | node_len > c->ranges[type].max_len) |
| 129 | goto out_len; |
| 130 | |
| 131 | if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc && |
| 132 | c->no_chk_data_crc) |
| 133 | return 0; |
| 134 | |
| 135 | crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8); |
| 136 | node_crc = le32_to_cpu(ch->crc); |
| 137 | if (crc != node_crc) { |
| 138 | if (!quiet) |
| 139 | ubifs_err("bad CRC: calculated %#08x, read %#08x", |
| 140 | crc, node_crc); |
| 141 | err = -EUCLEAN; |
| 142 | goto out; |
| 143 | } |
| 144 | |
| 145 | return 0; |
| 146 | |
| 147 | out_len: |
| 148 | if (!quiet) |
| 149 | ubifs_err("bad node length %d", node_len); |
| 150 | out: |
| 151 | if (!quiet) { |
| 152 | ubifs_err("bad node at LEB %d:%d", lnum, offs); |
| 153 | dbg_dump_node(c, buf); |
| 154 | dbg_dump_stack(); |
| 155 | } |
| 156 | return err; |
| 157 | } |
| 158 | |
| 159 | /** |
| 160 | * ubifs_pad - pad flash space. |
| 161 | * @c: UBIFS file-system description object |
| 162 | * @buf: buffer to put padding to |
| 163 | * @pad: how many bytes to pad |
| 164 | * |
| 165 | * The flash media obliges us to write only in chunks of %c->min_io_size and |
| 166 | * when we have to write less data we add padding node to the write-buffer and |
| 167 | * pad it to the next minimal I/O unit's boundary. Padding nodes help when the |
| 168 | * media is being scanned. If the amount of wasted space is not enough to fit a |
| 169 | * padding node which takes %UBIFS_PAD_NODE_SZ bytes, we write padding bytes |
| 170 | * pattern (%UBIFS_PADDING_BYTE). |
| 171 | * |
| 172 | * Padding nodes are also used to fill gaps when the "commit-in-gaps" method is |
| 173 | * used. |
| 174 | */ |
| 175 | void ubifs_pad(const struct ubifs_info *c, void *buf, int pad) |
| 176 | { |
| 177 | uint32_t crc; |
| 178 | |
| 179 | ubifs_assert(pad >= 0 && !(pad & 7)); |
| 180 | |
| 181 | if (pad >= UBIFS_PAD_NODE_SZ) { |
| 182 | struct ubifs_ch *ch = buf; |
| 183 | struct ubifs_pad_node *pad_node = buf; |
| 184 | |
| 185 | ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); |
| 186 | ch->node_type = UBIFS_PAD_NODE; |
| 187 | ch->group_type = UBIFS_NO_NODE_GROUP; |
| 188 | ch->padding[0] = ch->padding[1] = 0; |
| 189 | ch->sqnum = 0; |
| 190 | ch->len = cpu_to_le32(UBIFS_PAD_NODE_SZ); |
| 191 | pad -= UBIFS_PAD_NODE_SZ; |
| 192 | pad_node->pad_len = cpu_to_le32(pad); |
| 193 | crc = crc32(UBIFS_CRC32_INIT, buf + 8, UBIFS_PAD_NODE_SZ - 8); |
| 194 | ch->crc = cpu_to_le32(crc); |
| 195 | memset(buf + UBIFS_PAD_NODE_SZ, 0, pad); |
| 196 | } else if (pad > 0) |
| 197 | /* Too little space, padding node won't fit */ |
| 198 | memset(buf, UBIFS_PADDING_BYTE, pad); |
| 199 | } |
| 200 | |
| 201 | /** |
| 202 | * next_sqnum - get next sequence number. |
| 203 | * @c: UBIFS file-system description object |
| 204 | */ |
| 205 | static unsigned long long next_sqnum(struct ubifs_info *c) |
| 206 | { |
| 207 | unsigned long long sqnum; |
| 208 | |
| 209 | spin_lock(&c->cnt_lock); |
| 210 | sqnum = ++c->max_sqnum; |
| 211 | spin_unlock(&c->cnt_lock); |
| 212 | |
| 213 | if (unlikely(sqnum >= SQNUM_WARN_WATERMARK)) { |
| 214 | if (sqnum >= SQNUM_WATERMARK) { |
| 215 | ubifs_err("sequence number overflow %llu, end of life", |
| 216 | sqnum); |
| 217 | ubifs_ro_mode(c, -EINVAL); |
| 218 | } |
| 219 | ubifs_warn("running out of sequence numbers, end of life soon"); |
| 220 | } |
| 221 | |
| 222 | return sqnum; |
| 223 | } |
| 224 | |
| 225 | /** |
| 226 | * ubifs_prepare_node - prepare node to be written to flash. |
| 227 | * @c: UBIFS file-system description object |
| 228 | * @node: the node to pad |
| 229 | * @len: node length |
| 230 | * @pad: if the buffer has to be padded |
| 231 | * |
| 232 | * This function prepares node at @node to be written to the media - it |
| 233 | * calculates node CRC, fills the common header, and adds proper padding up to |
| 234 | * the next minimum I/O unit if @pad is not zero. |
| 235 | */ |
| 236 | void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad) |
| 237 | { |
| 238 | uint32_t crc; |
| 239 | struct ubifs_ch *ch = node; |
| 240 | unsigned long long sqnum = next_sqnum(c); |
| 241 | |
| 242 | ubifs_assert(len >= UBIFS_CH_SZ); |
| 243 | |
| 244 | ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); |
| 245 | ch->len = cpu_to_le32(len); |
| 246 | ch->group_type = UBIFS_NO_NODE_GROUP; |
| 247 | ch->sqnum = cpu_to_le64(sqnum); |
| 248 | ch->padding[0] = ch->padding[1] = 0; |
| 249 | crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8); |
| 250 | ch->crc = cpu_to_le32(crc); |
| 251 | |
| 252 | if (pad) { |
| 253 | len = ALIGN(len, 8); |
| 254 | pad = ALIGN(len, c->min_io_size) - len; |
| 255 | ubifs_pad(c, node + len, pad); |
| 256 | } |
| 257 | } |
| 258 | |
| 259 | /** |
| 260 | * ubifs_read_node - read node. |
| 261 | * @c: UBIFS file-system description object |
| 262 | * @buf: buffer to read to |
| 263 | * @type: node type |
| 264 | * @len: node length (not aligned) |
| 265 | * @lnum: logical eraseblock number |
| 266 | * @offs: offset within the logical eraseblock |
| 267 | * |
| 268 | * This function reads a node of known type and and length, checks it and |
| 269 | * stores in @buf. Returns zero in case of success, %-EUCLEAN if CRC mismatched |
| 270 | * and a negative error code in case of failure. |
| 271 | */ |
| 272 | int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len, |
| 273 | int lnum, int offs) |
| 274 | { |
| 275 | int err, l; |
| 276 | struct ubifs_ch *ch = buf; |
| 277 | |
| 278 | dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len); |
| 279 | ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); |
| 280 | ubifs_assert(len >= UBIFS_CH_SZ && offs + len <= c->leb_size); |
| 281 | ubifs_assert(!(offs & 7) && offs < c->leb_size); |
| 282 | ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT); |
| 283 | |
| 284 | err = ubi_read(c->ubi, lnum, buf, offs, len); |
| 285 | if (err && err != -EBADMSG) { |
| 286 | ubifs_err("cannot read node %d from LEB %d:%d, error %d", |
| 287 | type, lnum, offs, err); |
| 288 | return err; |
| 289 | } |
| 290 | |
| 291 | if (type != ch->node_type) { |
| 292 | ubifs_err("bad node type (%d but expected %d)", |
| 293 | ch->node_type, type); |
| 294 | goto out; |
| 295 | } |
| 296 | |
| 297 | err = ubifs_check_node(c, buf, lnum, offs, 0, 0); |
| 298 | if (err) { |
| 299 | ubifs_err("expected node type %d", type); |
| 300 | return err; |
| 301 | } |
| 302 | |
| 303 | l = le32_to_cpu(ch->len); |
| 304 | if (l != len) { |
| 305 | ubifs_err("bad node length %d, expected %d", l, len); |
| 306 | goto out; |
| 307 | } |
| 308 | |
| 309 | return 0; |
| 310 | |
| 311 | out: |
| 312 | ubifs_err("bad node at LEB %d:%d", lnum, offs); |
| 313 | dbg_dump_node(c, buf); |
| 314 | dbg_dump_stack(); |
| 315 | return -EINVAL; |
| 316 | } |