blob: 682483fc3206c40fa86dd04c8a9a8a9379e22b68 [file] [log] [blame]
Donghwa Leed2a69822012-07-02 01:16:02 +00001/*
2 * Copyright (C) 2012 Samsung Electronics
3 *
4 * Author: Donghwa Lee <dh09.lee@samsung.com>
5 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02006 * SPDX-License-Identifier: GPL-2.0+
Donghwa Leed2a69822012-07-02 01:16:02 +00007 */
8
9#include <config.h>
10#include <common.h>
11#include <malloc.h>
12#include <linux/err.h>
13#include <asm/arch/clk.h>
14#include <asm/arch/cpu.h>
15#include <asm/arch/dp_info.h>
16#include <asm/arch/dp.h>
Ajay Kumar9947d132013-02-21 23:53:06 +000017#include <fdtdec.h>
18#include <libfdt.h>
Donghwa Leed2a69822012-07-02 01:16:02 +000019
20#include "exynos_dp_lowlevel.h"
21
Ajay Kumar9947d132013-02-21 23:53:06 +000022DECLARE_GLOBAL_DATA_PTR;
23
Donghwa Leed2a69822012-07-02 01:16:02 +000024static struct exynos_dp_platform_data *dp_pd;
25
Ajay Kumarc18222b2013-02-21 23:52:58 +000026void __exynos_set_dp_phy(unsigned int onoff)
27{
28}
29void exynos_set_dp_phy(unsigned int onoff)
30 __attribute__((weak, alias("__exynos_set_dp_phy")));
31
Donghwa Leed2a69822012-07-02 01:16:02 +000032static void exynos_dp_disp_info(struct edp_disp_info *disp_info)
33{
34 disp_info->h_total = disp_info->h_res + disp_info->h_sync_width +
35 disp_info->h_back_porch + disp_info->h_front_porch;
36 disp_info->v_total = disp_info->v_res + disp_info->v_sync_width +
37 disp_info->v_back_porch + disp_info->v_front_porch;
38
39 return;
40}
41
42static int exynos_dp_init_dp(void)
43{
44 int ret;
45 exynos_dp_reset();
46
47 /* SW defined function Normal operation */
48 exynos_dp_enable_sw_func(DP_ENABLE);
49
50 ret = exynos_dp_init_analog_func();
51 if (ret != EXYNOS_DP_SUCCESS)
52 return ret;
53
54 exynos_dp_init_hpd();
55 exynos_dp_init_aux();
56
57 return ret;
58}
59
60static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
61{
62 int i;
63 unsigned char sum = 0;
64
65 for (i = 0; i < EDID_BLOCK_LENGTH; i++)
66 sum = sum + edid_data[i];
67
68 return sum;
69}
70
71static unsigned int exynos_dp_read_edid(void)
72{
73 unsigned char edid[EDID_BLOCK_LENGTH * 2];
74 unsigned int extend_block = 0;
75 unsigned char sum;
76 unsigned char test_vector;
77 int retval;
78
79 /*
80 * EDID device address is 0x50.
81 * However, if necessary, you must have set upper address
82 * into E-EDID in I2C device, 0x30.
83 */
84
85 /* Read Extension Flag, Number of 128-byte EDID extension blocks */
86 exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG,
87 &extend_block);
88
89 if (extend_block > 0) {
90 printf("DP EDID data includes a single extension!\n");
91
92 /* Read EDID data */
93 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
94 EDID_HEADER_PATTERN,
95 EDID_BLOCK_LENGTH,
96 &edid[EDID_HEADER_PATTERN]);
97 if (retval != 0) {
98 printf("DP EDID Read failed!\n");
99 return -1;
100 }
101 sum = exynos_dp_calc_edid_check_sum(edid);
102 if (sum != 0) {
103 printf("DP EDID bad checksum!\n");
104 return -1;
105 }
106
107 /* Read additional EDID data */
108 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
109 EDID_BLOCK_LENGTH,
110 EDID_BLOCK_LENGTH,
111 &edid[EDID_BLOCK_LENGTH]);
112 if (retval != 0) {
113 printf("DP EDID Read failed!\n");
114 return -1;
115 }
116 sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
117 if (sum != 0) {
118 printf("DP EDID bad checksum!\n");
119 return -1;
120 }
121
122 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
123 &test_vector);
124 if (test_vector & DPCD_TEST_EDID_READ) {
125 exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
126 edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
127 exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
128 DPCD_TEST_EDID_CHECKSUM_WRITE);
129 }
130 } else {
131 debug("DP EDID data does not include any extensions.\n");
132
133 /* Read EDID data */
134 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
135 EDID_HEADER_PATTERN,
136 EDID_BLOCK_LENGTH,
137 &edid[EDID_HEADER_PATTERN]);
138
139 if (retval != 0) {
140 printf("DP EDID Read failed!\n");
141 return -1;
142 }
143 sum = exynos_dp_calc_edid_check_sum(edid);
144 if (sum != 0) {
145 printf("DP EDID bad checksum!\n");
146 return -1;
147 }
148
149 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
150 &test_vector);
151 if (test_vector & DPCD_TEST_EDID_READ) {
152 exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
153 edid[EDID_CHECKSUM]);
154 exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
155 DPCD_TEST_EDID_CHECKSUM_WRITE);
156 }
157 }
158
159 debug("DP EDID Read success!\n");
160
161 return 0;
162}
163
164static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info)
165{
166 unsigned char buf[12];
167 unsigned int ret;
168 unsigned char temp;
169 unsigned char retry_cnt;
170 unsigned char dpcd_rev[16];
171 unsigned char lane_bw[16];
172 unsigned char lane_cnt[16];
173
174 memset(dpcd_rev, 0, 16);
175 memset(lane_bw, 0, 16);
176 memset(lane_cnt, 0, 16);
177 memset(buf, 0, 12);
178
179 retry_cnt = 5;
180 while (retry_cnt) {
181 /* Read DPCD 0x0000-0x000b */
182 ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12,
183 buf);
184 if (ret != EXYNOS_DP_SUCCESS) {
185 if (retry_cnt == 0) {
186 printf("DP read_byte_from_dpcd() failed\n");
187 return ret;
188 }
189 retry_cnt--;
190 } else
191 break;
192 }
193
194 /* */
195 temp = buf[DPCD_DPCD_REV];
196 if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11)
197 edp_info->dpcd_rev = temp;
198 else {
199 printf("DP Wrong DPCD Rev : %x\n", temp);
200 return -ENODEV;
201 }
202
203 temp = buf[DPCD_MAX_LINK_RATE];
204 if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70)
205 edp_info->lane_bw = temp;
206 else {
207 printf("DP Wrong MAX LINK RATE : %x\n", temp);
208 return -EINVAL;
209 }
210
211 /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */
212 if (edp_info->dpcd_rev == DP_DPCD_REV_11) {
213 temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
214 if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
215 edp_info->dpcd_efc = 1;
216 else
217 edp_info->dpcd_efc = 0;
218 } else {
219 temp = buf[DPCD_MAX_LANE_COUNT];
220 edp_info->dpcd_efc = 0;
221 }
222
223 if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 ||
224 temp == DP_LANE_CNT_4) {
225 edp_info->lane_cnt = temp;
226 } else {
227 printf("DP Wrong MAX LANE COUNT : %x\n", temp);
228 return -EINVAL;
229 }
230
231 ret = exynos_dp_read_edid();
232 if (ret != EXYNOS_DP_SUCCESS) {
233 printf("DP exynos_dp_read_edid() failed\n");
234 return -EINVAL;
235 }
236
237 return ret;
238}
239
240static void exynos_dp_init_training(void)
241{
242 /*
243 * MACRO_RST must be applied after the PLL_LOCK to avoid
244 * the DP inter pair skew issue for at least 10 us
245 */
246 exynos_dp_reset_macro();
247
248 /* All DP analog module power up */
249 exynos_dp_set_analog_power_down(POWER_ALL, 0);
250}
251
252static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info)
253{
254 unsigned char buf[5];
255 unsigned int ret = 0;
256
257 debug("DP: %s was called\n", __func__);
258
259 edp_info->lt_info.lt_status = DP_LT_CR;
260 edp_info->lt_info.ep_loop = 0;
261 edp_info->lt_info.cr_loop[0] = 0;
262 edp_info->lt_info.cr_loop[1] = 0;
263 edp_info->lt_info.cr_loop[2] = 0;
264 edp_info->lt_info.cr_loop[3] = 0;
265
266 /* Set sink to D0 (Sink Not Ready) mode. */
267 ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE,
268 DPCD_SET_POWER_STATE_D0);
269 if (ret != EXYNOS_DP_SUCCESS) {
270 printf("DP write_dpcd_byte failed\n");
271 return ret;
272 }
273
274 /* Set link rate and count as you want to establish*/
275 exynos_dp_set_link_bandwidth(edp_info->lane_bw);
276 exynos_dp_set_lane_count(edp_info->lane_cnt);
277
278 /* Setup RX configuration */
279 buf[0] = edp_info->lane_bw;
280 buf[1] = edp_info->lane_cnt;
281
282 ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2,
283 buf);
284 if (ret != EXYNOS_DP_SUCCESS) {
285 printf("DP write_dpcd_byte failed\n");
286 return ret;
287 }
288
289 exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0,
290 edp_info->lane_cnt);
291
292 /* Set training pattern 1 */
293 exynos_dp_set_training_pattern(TRAINING_PTN1);
294
295 /* Set RX training pattern */
296 buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1;
297
298 buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
299 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
300 buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
301 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
302 buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
303 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
304 buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
305 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
306
307 ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET,
308 5, buf);
309 if (ret != EXYNOS_DP_SUCCESS) {
310 printf("DP write_dpcd_byte failed\n");
311 return ret;
312 }
313
314 return ret;
315}
316
317static unsigned int exynos_dp_training_pattern_dis(void)
318{
319 unsigned int ret = EXYNOS_DP_SUCCESS;
320
321 exynos_dp_set_training_pattern(DP_NONE);
322
323 ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
324 DPCD_TRAINING_PATTERN_DISABLED);
325 if (ret != EXYNOS_DP_SUCCESS) {
326 printf("DP requst_link_traninig_req failed\n");
327 return -EAGAIN;
328 }
329
330 return ret;
331}
332
333static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable)
334{
335 unsigned char data;
336 unsigned int ret = EXYNOS_DP_SUCCESS;
337
338 ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET,
339 &data);
340 if (ret != EXYNOS_DP_SUCCESS) {
341 printf("DP read_from_dpcd failed\n");
342 return -EAGAIN;
343 }
344
345 if (enable)
346 data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data);
347 else
348 data = DPCD_LN_COUNT_SET(data);
349
350 ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET,
351 data);
352 if (ret != EXYNOS_DP_SUCCESS) {
353 printf("DP write_to_dpcd failed\n");
354 return -EAGAIN;
355
356 }
357
358 return ret;
359}
360
361static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode)
362{
363 unsigned int ret = EXYNOS_DP_SUCCESS;
364
365 ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode);
366 if (ret != EXYNOS_DP_SUCCESS) {
367 printf("DP rx_enhance_mode failed\n");
368 return -EAGAIN;
369 }
370
371 exynos_dp_enable_enhanced_mode(enhance_mode);
372
373 return ret;
374}
375
376static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info,
377 unsigned char *status)
378{
379 unsigned int ret, i;
380 unsigned char buf[2];
381 unsigned char lane_stat[DP_LANE_CNT_4] = {0,};
382 unsigned char shift_val[DP_LANE_CNT_4] = {0,};
383
384 shift_val[0] = 0;
385 shift_val[1] = 4;
386 shift_val[2] = 0;
387 shift_val[3] = 4;
388
389 ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf);
390 if (ret != EXYNOS_DP_SUCCESS) {
391 printf("DP read lane status failed\n");
392 return ret;
393 }
394
395 for (i = 0; i < edp_info->lane_cnt; i++) {
396 lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f;
397 if (lane_stat[0] != lane_stat[i]) {
398 printf("Wrong lane status\n");
399 return -EINVAL;
400 }
401 }
402
403 *status = lane_stat[0];
404
405 return ret;
406}
407
408static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num,
409 unsigned char *sw, unsigned char *em)
410{
411 unsigned int ret = EXYNOS_DP_SUCCESS;
412 unsigned char buf;
413 unsigned int dpcd_addr;
414 unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
415
416 /*lane_num value is used as arry index, so this range 0 ~ 3 */
417 dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
418
419 ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf);
420 if (ret != EXYNOS_DP_SUCCESS) {
421 printf("DP read adjust request failed\n");
422 return -EAGAIN;
423 }
424
425 *sw = ((buf >> shift_val[lane_num]) & 0x03);
426 *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2;
427
428 return ret;
429}
430
431static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info)
432{
433 int ret;
434
435 ret = exynos_dp_training_pattern_dis();
436 if (ret != EXYNOS_DP_SUCCESS) {
437 printf("DP training_patter_disable() failed\n");
438 edp_info->lt_info.lt_status = DP_LT_FAIL;
439 }
440
441 ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
442 if (ret != EXYNOS_DP_SUCCESS) {
443 printf("DP set_enhanced_mode() failed\n");
444 edp_info->lt_info.lt_status = DP_LT_FAIL;
445 }
446
447 return ret;
448}
449
450static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info)
451{
452 int ret;
453
454 if (edp_info->lane_bw == DP_LANE_BW_2_70) {
455 edp_info->lane_bw = DP_LANE_BW_1_62;
456 printf("DP Change lane bw to 1.62Gbps\n");
457 edp_info->lt_info.lt_status = DP_LT_START;
458 ret = EXYNOS_DP_SUCCESS;
459 } else {
460 ret = exynos_dp_training_pattern_dis();
461 if (ret != EXYNOS_DP_SUCCESS)
462 printf("DP training_patter_disable() failed\n");
463
464 ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
465 if (ret != EXYNOS_DP_SUCCESS)
466 printf("DP set_enhanced_mode() failed\n");
467
468 edp_info->lt_info.lt_status = DP_LT_FAIL;
469 }
470
471 return ret;
472}
473
474static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
475 *edp_info)
476{
477 unsigned int ret = EXYNOS_DP_SUCCESS;
478 unsigned char lane_stat;
479 unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, };
480 unsigned int i;
481 unsigned char adj_req_sw;
482 unsigned char adj_req_em;
483 unsigned char buf[5];
484
485 debug("DP: %s was called\n", __func__);
486 mdelay(1);
487
488 ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
489 if (ret != EXYNOS_DP_SUCCESS) {
490 printf("DP read lane status failed\n");
491 edp_info->lt_info.lt_status = DP_LT_FAIL;
492 return ret;
493 }
494
495 if (lane_stat & DP_LANE_STAT_CR_DONE) {
496 debug("DP clock Recovery training succeed\n");
497 exynos_dp_set_training_pattern(TRAINING_PTN2);
498
499 for (i = 0; i < edp_info->lane_cnt; i++) {
500 ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw,
501 &adj_req_em);
502 if (ret != EXYNOS_DP_SUCCESS) {
503 edp_info->lt_info.lt_status = DP_LT_FAIL;
504 return ret;
505 }
506
507 lt_ctl_val[i] = 0;
508 lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
509
510 if ((adj_req_sw == VOLTAGE_LEVEL_3)
511 || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
512 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
513 MAX_PRE_EMPHASIS_REACH_3;
514 }
515 exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
516 }
517
518 buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2;
519 buf[1] = lt_ctl_val[0];
520 buf[2] = lt_ctl_val[1];
521 buf[3] = lt_ctl_val[2];
522 buf[4] = lt_ctl_val[3];
523
524 ret = exynos_dp_write_bytes_to_dpcd(
525 DPCD_TRAINING_PATTERN_SET, 5, buf);
526 if (ret != EXYNOS_DP_SUCCESS) {
527 printf("DP write traning pattern1 failed\n");
528 edp_info->lt_info.lt_status = DP_LT_FAIL;
529 return ret;
530 } else
531 edp_info->lt_info.lt_status = DP_LT_ET;
532 } else {
533 for (i = 0; i < edp_info->lane_cnt; i++) {
534 lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i);
535 ret = exynos_dp_read_dpcd_adj_req(i,
536 &adj_req_sw, &adj_req_em);
537 if (ret != EXYNOS_DP_SUCCESS) {
538 printf("DP read adj req failed\n");
539 edp_info->lt_info.lt_status = DP_LT_FAIL;
540 return ret;
541 }
542
543 if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
544 (adj_req_em == PRE_EMPHASIS_LEVEL_3))
545 ret = exynos_dp_reduce_link_rate(edp_info);
546
547 if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) ==
548 adj_req_sw) &&
549 (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) ==
550 adj_req_em)) {
551 edp_info->lt_info.cr_loop[i]++;
552 if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP)
553 ret = exynos_dp_reduce_link_rate(
554 edp_info);
555 }
556
557 lt_ctl_val[i] = 0;
558 lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
559
560 if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
561 (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
562 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
563 MAX_PRE_EMPHASIS_REACH_3;
564 }
565 exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
566 }
567
568 ret = exynos_dp_write_bytes_to_dpcd(
569 DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
570 if (ret != EXYNOS_DP_SUCCESS) {
571 printf("DP write traning pattern2 failed\n");
572 edp_info->lt_info.lt_status = DP_LT_FAIL;
573 return ret;
574 }
575 }
576
577 return ret;
578}
579
580static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info
581 *edp_info)
582{
583 unsigned int ret = EXYNOS_DP_SUCCESS;
584 unsigned char lane_stat, adj_req_sw, adj_req_em, i;
585 unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,};
586 unsigned char interlane_aligned = 0;
587 unsigned char f_bw;
588 unsigned char f_lane_cnt;
589 unsigned char sink_stat;
590
591 mdelay(1);
592
593 ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
594 if (ret != EXYNOS_DP_SUCCESS) {
595 printf("DP read lane status failed\n");
596 edp_info->lt_info.lt_status = DP_LT_FAIL;
597 return ret;
598 }
599
600 debug("DP lane stat : %x\n", lane_stat);
601
602 if (lane_stat & DP_LANE_STAT_CR_DONE) {
603 ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED,
604 &sink_stat);
605 if (ret != EXYNOS_DP_SUCCESS) {
606 edp_info->lt_info.lt_status = DP_LT_FAIL;
607
608 return ret;
609 }
610
611 interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE);
612
613 for (i = 0; i < edp_info->lane_cnt; i++) {
614 ret = exynos_dp_read_dpcd_adj_req(i,
615 &adj_req_sw, &adj_req_em);
616 if (ret != EXYNOS_DP_SUCCESS) {
617 printf("DP read adj req 1 failed\n");
618 edp_info->lt_info.lt_status = DP_LT_FAIL;
619
620 return ret;
621 }
622
623 lt_ctl_val[i] = 0;
624 lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
625
626 if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
627 (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
628 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3;
629 lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3;
630 }
631 }
632
633 if (((lane_stat&DP_LANE_STAT_CE_DONE) &&
634 (lane_stat&DP_LANE_STAT_SYM_LOCK))
635 && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) {
636 debug("DP Equalizer training succeed\n");
637
638 f_bw = exynos_dp_get_link_bandwidth();
639 f_lane_cnt = exynos_dp_get_lane_count();
640
641 debug("DP final BandWidth : %x\n", f_bw);
642 debug("DP final Lane Count : %x\n", f_lane_cnt);
643
644 edp_info->lt_info.lt_status = DP_LT_FINISHED;
645
646 exynos_dp_equalizer_err_link(edp_info);
647
648 } else {
649 edp_info->lt_info.ep_loop++;
650
651 if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) {
652 if (edp_info->lane_bw == DP_LANE_BW_2_70) {
653 ret = exynos_dp_reduce_link_rate(
654 edp_info);
655 } else {
656 edp_info->lt_info.lt_status =
657 DP_LT_FAIL;
658 exynos_dp_equalizer_err_link(edp_info);
659 }
660 } else {
661 for (i = 0; i < edp_info->lane_cnt; i++)
662 exynos_dp_set_lanex_pre_emphasis(
663 lt_ctl_val[i], i);
664
665 ret = exynos_dp_write_bytes_to_dpcd(
666 DPCD_TRAINING_LANE0_SET,
667 4, lt_ctl_val);
668 if (ret != EXYNOS_DP_SUCCESS) {
669 printf("DP set lt pattern failed\n");
670 edp_info->lt_info.lt_status =
671 DP_LT_FAIL;
672 exynos_dp_equalizer_err_link(edp_info);
673 }
674 }
675 }
676 } else if (edp_info->lane_bw == DP_LANE_BW_2_70) {
677 ret = exynos_dp_reduce_link_rate(edp_info);
678 } else {
679 edp_info->lt_info.lt_status = DP_LT_FAIL;
680 exynos_dp_equalizer_err_link(edp_info);
681 }
682
683 return ret;
684}
685
686static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info)
687{
688 unsigned int ret = 0;
689 int training_finished;
690
691 /* Turn off unnecessary lane */
692 if (edp_info->lane_cnt == 1)
693 exynos_dp_set_analog_power_down(CH1_BLOCK, 1);
694
695 training_finished = 0;
696
697 edp_info->lt_info.lt_status = DP_LT_START;
698
699 /* Process here */
700 while (!training_finished) {
701 switch (edp_info->lt_info.lt_status) {
702 case DP_LT_START:
703 ret = exynos_dp_link_start(edp_info);
704 if (ret != EXYNOS_DP_SUCCESS) {
705 printf("DP LT:link start failed\n");
706 return ret;
707 }
708 break;
709 case DP_LT_CR:
710 ret = exynos_dp_process_clock_recovery(edp_info);
711 if (ret != EXYNOS_DP_SUCCESS) {
712 printf("DP LT:clock recovery failed\n");
713 return ret;
714 }
715 break;
716 case DP_LT_ET:
717 ret = exynos_dp_process_equalizer_training(edp_info);
718 if (ret != EXYNOS_DP_SUCCESS) {
719 printf("DP LT:equalizer training failed\n");
720 return ret;
721 }
722 break;
723 case DP_LT_FINISHED:
724 training_finished = 1;
725 break;
726 case DP_LT_FAIL:
727 return -1;
728 }
729 }
730
731 return ret;
732}
733
734static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info)
735{
736 unsigned int ret;
737
738 exynos_dp_init_training();
739
740 ret = exynos_dp_sw_link_training(edp_info);
741 if (ret != EXYNOS_DP_SUCCESS)
742 printf("DP dp_sw_link_traning() failed\n");
743
744 return ret;
745}
746
747static void exynos_dp_enable_scramble(unsigned int enable)
748{
749 unsigned char data;
750
751 if (enable) {
752 exynos_dp_enable_scrambling(DP_ENABLE);
753
754 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
755 &data);
756 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
757 (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
758 } else {
759 exynos_dp_enable_scrambling(DP_DISABLE);
760 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
761 &data);
762 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
763 (u8)(data | DPCD_SCRAMBLING_DISABLED));
764 }
765}
766
767static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
768{
769 unsigned int ret = 0;
770 unsigned int retry_cnt;
771
772 mdelay(1);
773
774 if (edp_info->video_info.master_mode) {
775 printf("DP does not support master mode\n");
776 return -ENODEV;
777 } else {
778 /* debug slave */
779 exynos_dp_config_video_slave_mode(&edp_info->video_info);
780 }
781
782 exynos_dp_set_video_color_format(&edp_info->video_info);
783
784 if (edp_info->video_info.bist_mode) {
785 if (exynos_dp_config_video_bist(edp_info) != 0)
786 return -1;
787 }
788
789 ret = exynos_dp_get_pll_lock_status();
790 if (ret != PLL_LOCKED) {
791 printf("DP PLL is not locked yet\n");
792 return -EIO;
793 }
794
795 if (edp_info->video_info.master_mode == 0) {
796 retry_cnt = 10;
797 while (retry_cnt) {
798 ret = exynos_dp_is_slave_video_stream_clock_on();
799 if (ret != EXYNOS_DP_SUCCESS) {
800 if (retry_cnt == 0) {
801 printf("DP stream_clock_on failed\n");
802 return ret;
803 }
804 retry_cnt--;
805 mdelay(1);
806 } else
807 break;
808 }
809 }
810
811 /* Set to use the register calculated M/N video */
812 exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0);
813
814 /* For video bist, Video timing must be generated by register */
815 exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE);
816
817 /* Enable video bist */
818 if (edp_info->video_info.bist_pattern != COLOR_RAMP &&
819 edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES &&
820 edp_info->video_info.bist_pattern != COLOR_SQUARE)
821 exynos_dp_enable_video_bist(edp_info->video_info.bist_mode);
822 else
823 exynos_dp_enable_video_bist(DP_DISABLE);
824
825 /* Disable video mute */
826 exynos_dp_enable_video_mute(DP_DISABLE);
827
828 /* Configure video Master or Slave mode */
829 exynos_dp_enable_video_master(edp_info->video_info.master_mode);
830
831 /* Enable video */
832 exynos_dp_start_video();
833
834 if (edp_info->video_info.master_mode == 0) {
835 retry_cnt = 100;
836 while (retry_cnt) {
837 ret = exynos_dp_is_video_stream_on();
838 if (ret != EXYNOS_DP_SUCCESS) {
839 if (retry_cnt == 0) {
840 printf("DP Timeout of video stream\n");
841 return ret;
842 }
843 retry_cnt--;
844 mdelay(5);
845 } else
846 break;
847 }
848 }
849
850 return ret;
851}
852
Ajay Kumar9947d132013-02-21 23:53:06 +0000853#ifdef CONFIG_OF_CONTROL
854int exynos_dp_parse_dt(const void *blob, struct edp_device_info *edp_info)
855{
856 unsigned int node = fdtdec_next_compatible(blob, 0,
857 COMPAT_SAMSUNG_EXYNOS5_DP);
858 if (node <= 0) {
859 debug("exynos_dp: Can't get device node for dp\n");
860 return -ENODEV;
861 }
862
863 edp_info->disp_info.h_res = fdtdec_get_int(blob, node,
864 "samsung,h-res", 0);
865 edp_info->disp_info.h_sync_width = fdtdec_get_int(blob, node,
866 "samsung,h-sync-width", 0);
867 edp_info->disp_info.h_back_porch = fdtdec_get_int(blob, node,
868 "samsung,h-back-porch", 0);
869 edp_info->disp_info.h_front_porch = fdtdec_get_int(blob, node,
870 "samsung,h-front-porch", 0);
871 edp_info->disp_info.v_res = fdtdec_get_int(blob, node,
872 "samsung,v-res", 0);
873 edp_info->disp_info.v_sync_width = fdtdec_get_int(blob, node,
874 "samsung,v-sync-width", 0);
875 edp_info->disp_info.v_back_porch = fdtdec_get_int(blob, node,
876 "samsung,v-back-porch", 0);
877 edp_info->disp_info.v_front_porch = fdtdec_get_int(blob, node,
878 "samsung,v-front-porch", 0);
879 edp_info->disp_info.v_sync_rate = fdtdec_get_int(blob, node,
880 "samsung,v-sync-rate", 0);
881
882 edp_info->lt_info.lt_status = fdtdec_get_int(blob, node,
883 "samsung,lt-status", 0);
884
885 edp_info->video_info.master_mode = fdtdec_get_int(blob, node,
886 "samsung,master-mode", 0);
887 edp_info->video_info.bist_mode = fdtdec_get_int(blob, node,
888 "samsung,bist-mode", 0);
889 edp_info->video_info.bist_pattern = fdtdec_get_int(blob, node,
890 "samsung,bist-pattern", 0);
891 edp_info->video_info.h_sync_polarity = fdtdec_get_int(blob, node,
892 "samsung,h-sync-polarity", 0);
893 edp_info->video_info.v_sync_polarity = fdtdec_get_int(blob, node,
894 "samsung,v-sync-polarity", 0);
895 edp_info->video_info.interlaced = fdtdec_get_int(blob, node,
896 "samsung,interlaced", 0);
897 edp_info->video_info.color_space = fdtdec_get_int(blob, node,
898 "samsung,color-space", 0);
899 edp_info->video_info.dynamic_range = fdtdec_get_int(blob, node,
900 "samsung,dynamic-range", 0);
901 edp_info->video_info.ycbcr_coeff = fdtdec_get_int(blob, node,
902 "samsung,ycbcr-coeff", 0);
903 edp_info->video_info.color_depth = fdtdec_get_int(blob, node,
904 "samsung,color-depth", 0);
905 return 0;
906}
907#endif
908
Donghwa Leed2a69822012-07-02 01:16:02 +0000909unsigned int exynos_init_dp(void)
910{
911 unsigned int ret;
912 struct edp_device_info *edp_info;
Donghwa Leed2a69822012-07-02 01:16:02 +0000913
914 edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL);
915 if (!edp_info) {
916 debug("failed to allocate edp device object.\n");
917 return -EFAULT;
918 }
919
Ajay Kumar9947d132013-02-21 23:53:06 +0000920#ifdef CONFIG_OF_CONTROL
921 if (exynos_dp_parse_dt(gd->fdt_blob, edp_info))
922 debug("unable to parse DP DT node\n");
923#else
Donghwa Leed2a69822012-07-02 01:16:02 +0000924 edp_info = dp_pd->edp_dev_info;
925 if (edp_info == NULL) {
926 debug("failed to get edp_info data.\n");
927 return -EFAULT;
928 }
Ajay Kumar9947d132013-02-21 23:53:06 +0000929#endif
Donghwa Leed2a69822012-07-02 01:16:02 +0000930
Ajay Kumarbeded3d2013-02-21 23:53:04 +0000931 exynos_dp_set_base_addr();
932
Donghwa Leed2a69822012-07-02 01:16:02 +0000933 exynos_dp_disp_info(&edp_info->disp_info);
934
Ajay Kumarc18222b2013-02-21 23:52:58 +0000935 exynos_set_dp_phy(1);
Donghwa Leed2a69822012-07-02 01:16:02 +0000936
937 ret = exynos_dp_init_dp();
938 if (ret != EXYNOS_DP_SUCCESS) {
939 printf("DP exynos_dp_init_dp() failed\n");
940 return ret;
941 }
942
943 ret = exynos_dp_handle_edid(edp_info);
944 if (ret != EXYNOS_DP_SUCCESS) {
945 printf("EDP handle_edid fail\n");
946 return ret;
947 }
948
949 ret = exynos_dp_set_link_train(edp_info);
950 if (ret != EXYNOS_DP_SUCCESS) {
951 printf("DP link training fail\n");
952 return ret;
953 }
954
955 exynos_dp_enable_scramble(DP_ENABLE);
956 exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE);
957 exynos_dp_enable_enhanced_mode(DP_ENABLE);
958
959 exynos_dp_set_link_bandwidth(edp_info->lane_bw);
960 exynos_dp_set_lane_count(edp_info->lane_cnt);
961
962 exynos_dp_init_video();
963 ret = exynos_dp_config_video(edp_info);
964 if (ret != EXYNOS_DP_SUCCESS) {
965 printf("Exynos DP init failed\n");
966 return ret;
967 }
968
969 printf("Exynos DP init done\n");
970
971 return ret;
972}
973
974void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd)
975{
976 if (pd == NULL) {
977 debug("pd is NULL\n");
978 return;
979 }
980
981 dp_pd = pd;
982}