blob: 2ab20a6c85b0af01738efe60bf993c9dd9d4a717 [file] [log] [blame]
Simon Glasscf298162020-09-10 20:21:13 -06001source "common/Kconfig.boot"
2
Simon Glass98af8792016-10-17 20:12:35 -06003menu "Console"
4
Tom Rini4880b022016-11-29 09:14:56 -05005config MENU
6 bool
7 help
8 This is the library functionality to provide a text-based menu of
9 choices for the user to make choices with.
10
Simon Glass9854a872015-11-08 23:47:48 -070011config CONSOLE_RECORD
12 bool "Console recording"
13 help
14 This provides a way to record console output (and provide console
Robert P. J. Day57247d92016-08-31 12:49:13 -040015 input) through circular buffers. This is mostly useful for testing.
Simon Glass9854a872015-11-08 23:47:48 -070016 Console output is recorded even when the console is silent.
17 To enable console recording, call console_record_reset_enable()
18 from your code.
19
Ovidiu Panait4e819202020-11-28 10:43:03 +020020config CONSOLE_RECORD_INIT_F
21 bool "Enable console recording during pre-relocation init"
22 depends on CONSOLE_RECORD && SYS_MALLOC_F
23 default y
24 help
25 This option enables console recording during pre-relocation init.
26 CONFIG_SYS_MALLOC_F must be enabled to use this feature.
27
Simon Glass9854a872015-11-08 23:47:48 -070028config CONSOLE_RECORD_OUT_SIZE
29 hex "Output buffer size"
30 depends on CONSOLE_RECORD
31 default 0x400 if CONSOLE_RECORD
32 help
33 Set the size of the console output buffer. When this fills up, no
34 more data will be recorded until some is removed. The buffer is
35 allocated immediately after the malloc() region is ready.
36
37config CONSOLE_RECORD_IN_SIZE
38 hex "Input buffer size"
39 depends on CONSOLE_RECORD
40 default 0x100 if CONSOLE_RECORD
41 help
42 Set the size of the console input buffer. When this contains data,
43 tstc() and getc() will use this in preference to real device input.
44 The buffer is allocated immediately after the malloc() region is
45 ready.
Siva Durga Prasad Paladugu4d255072016-07-19 10:42:22 +053046
Christian Gmeiner83f6f602018-09-10 12:43:16 +020047config DISABLE_CONSOLE
48 bool "Add functionality to disable console completely"
49 help
50 Disable console (in & out).
51
Siva Durga Prasad Paladugua4d88922016-07-29 15:31:47 +053052config IDENT_STRING
53 string "Board specific string to be added to uboot version string"
54 help
55 This options adds the board specific name to u-boot version.
56
Masahiro Yamadab44b3022017-09-16 14:10:40 +090057config LOGLEVEL
58 int "loglevel"
Tom Rini6a3e65d2017-10-04 16:44:30 -040059 default 4
Marek Bykowski2aa69c92020-02-03 11:43:32 +010060 range 0 10
Masahiro Yamadab44b3022017-09-16 14:10:40 +090061 help
62 All Messages with a loglevel smaller than the console loglevel will
63 be compiled in. The loglevels are defined as follows:
64
Simon Glass6fc7e932019-02-16 20:24:34 -070065 0 - emergency
66 1 - alert
67 2 - critical
68 3 - error
69 4 - warning
70 5 - note
71 6 - info
72 7 - debug
73 8 - debug content
74 9 - debug hardware I/O
Masahiro Yamadab44b3022017-09-16 14:10:40 +090075
76config SPL_LOGLEVEL
77 int
78 default LOGLEVEL
79
Simon Glass4d8d3052018-11-15 18:43:49 -070080config TPL_LOGLEVEL
81 int
82 default LOGLEVEL
83
Simon Glass98af8792016-10-17 20:12:35 -060084config SILENT_CONSOLE
85 bool "Support a silent console"
86 help
87 This option allows the console to be silenced, meaning that no
88 output will appear on the console devices. This is controlled by
Chris Packhamf7597732019-01-11 15:30:50 +130089 setting the environment variable 'silent' to a non-empty value.
Simon Glass98af8792016-10-17 20:12:35 -060090 Note this also silences the console when booting Linux.
91
92 When the console is set up, the variable is checked, and the
93 GD_FLG_SILENT flag is set. Changing the environment variable later
94 will update the flag.
95
96config SILENT_U_BOOT_ONLY
97 bool "Only silence the U-Boot console"
98 depends on SILENT_CONSOLE
99 help
100 Normally when the U-Boot console is silenced, Linux's console is
101 also silenced (assuming the board boots into Linux). This option
102 allows the linux console to operate normally, even if U-Boot's
103 is silenced.
104
105config SILENT_CONSOLE_UPDATE_ON_SET
106 bool "Changes to the 'silent' environment variable update immediately"
107 depends on SILENT_CONSOLE
108 default y if SILENT_CONSOLE
109 help
110 When the 'silent' environment variable is changed, update the
111 console silence flag immediately. This allows 'setenv' to be used
112 to silence or un-silence the console.
113
114 The effect is that any change to the variable will affect the
115 GD_FLG_SILENT flag.
116
117config SILENT_CONSOLE_UPDATE_ON_RELOC
118 bool "Allow flags to take effect on relocation"
119 depends on SILENT_CONSOLE
120 help
121 In some cases the environment is not available until relocation
122 (e.g. NAND). This option makes the value of the 'silent'
123 environment variable take effect at relocation.
124
Simon Glass8f925582016-10-17 20:12:36 -0600125config PRE_CONSOLE_BUFFER
126 bool "Buffer characters before the console is available"
127 help
128 Prior to the console being initialised (i.e. serial UART
129 initialised etc) all console output is silently discarded.
130 Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
131 buffer any console messages prior to the console being
132 initialised to a buffer. The buffer is a circular buffer, so
133 if it overflows, earlier output is discarded.
134
135 Note that this is not currently supported in SPL. It would be
136 useful to be able to share the pre-console buffer with SPL.
137
138config PRE_CON_BUF_SZ
139 int "Sets the size of the pre-console buffer"
140 depends on PRE_CONSOLE_BUFFER
141 default 4096
142 help
143 The size of the pre-console buffer affects how much console output
144 can be held before it overflows and starts discarding earlier
145 output. Normally there is very little output at this early stage,
146 unless debugging is enabled, so allow enough for ~10 lines of
147 text.
148
149 This is a useful feature if you are using a video console and
150 want to see the full boot output on the console. Without this
151 option only the post-relocation output will be displayed.
152
153config PRE_CON_BUF_ADDR
154 hex "Address of the pre-console buffer"
155 depends on PRE_CONSOLE_BUFFER
156 default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
157 default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
Jagan Teki38070172020-01-23 19:42:19 +0530158 default 0x0f000000 if ROCKCHIP_RK3288
Jagan Teki61853a72020-04-02 17:11:23 +0530159 default 0x0f200000 if ROCKCHIP_RK3399
Simon Glass8f925582016-10-17 20:12:36 -0600160 help
161 This sets the start address of the pre-console buffer. This must
162 be in available memory and is accessed before relocation and
163 possibly before DRAM is set up. Therefore choose an address
164 carefully.
165
166 We should consider removing this option and allocating the memory
167 in board_init_f_init_reserve() instead.
168
Simon Glassef26d602016-10-17 20:12:37 -0600169config CONSOLE_MUX
170 bool "Enable console multiplexing"
171 default y if DM_VIDEO || VIDEO || LCD
172 help
173 This allows multiple devices to be used for each console 'file'.
174 For example, stdout can be set to go to serial and video.
175 Similarly, stdin can be set to come from serial and keyboard.
176 Input can be provided from either source. Console multiplexing
177 adds a small amount of size to U-Boot. Changes to the environment
178 variables stdout, stdin and stderr will take effect immediately.
179
180config SYS_CONSOLE_IS_IN_ENV
181 bool "Select console devices from the environment"
182 default y if CONSOLE_MUX
183 help
184 This allows multiple input/output devices to be set at boot time.
185 For example, if stdout is set to "serial,video" then output will
186 be sent to both the serial and video devices on boot. The
187 environment variables can be updated after boot to change the
188 input/output devices.
189
Simon Glass84f2a5d2016-10-17 20:12:59 -0600190config SYS_CONSOLE_OVERWRITE_ROUTINE
191 bool "Allow board control over console overwriting"
192 help
193 If this is enabled, and the board-specific function
194 overwrite_console() returns 1, the stdin, stderr and stdout are
195 switched to the serial port, else the settings in the environment
196 are used. If this is not enabled, the console will not be switched
197 to serial.
198
Simon Glass3505bc52016-10-17 20:12:58 -0600199config SYS_CONSOLE_ENV_OVERWRITE
200 bool "Update environment variables during console init"
201 help
202 The console environment variables (stdout, stdin, stderr) can be
203 used to determine the correct console devices on start-up. This
204 option writes the console devices to these variables on console
205 start-up (after relocation). This causes the environment to be
206 updated to match the console devices actually chosen.
207
Simon Glassf3f3eff2016-10-17 20:13:00 -0600208config SYS_CONSOLE_INFO_QUIET
209 bool "Don't display the console devices on boot"
210 help
211 Normally U-Boot displays the current settings for stdout, stdin
212 and stderr on boot when the post-relocation console is set up.
Chris Packhamf7597732019-01-11 15:30:50 +1300213 Enable this option to suppress this output. It can be obtained by
Simon Glassf3f3eff2016-10-17 20:13:00 -0600214 calling stdio_print_current_devices() from board code.
215
Simon Glass869588d2016-10-17 20:13:02 -0600216config SYS_STDIO_DEREGISTER
217 bool "Allow deregistering stdio devices"
218 default y if USB_KEYBOARD
219 help
220 Generally there is no need to deregister stdio devices since they
221 are never deactivated. But if a stdio device is used which can be
222 removed (for example a USB keyboard) then this option can be
223 enabled to ensure this is handled correctly.
224
Simon Glass7e156382020-08-11 11:23:36 -0600225config SPL_SYS_STDIO_DEREGISTER
226 bool "Allow deregistering stdio devices in SPL"
227 help
228 Generally there is no need to deregister stdio devices since they
229 are never deactivated. But if a stdio device is used which can be
230 removed (for example a USB keyboard) then this option can be
231 enabled to ensure this is handled correctly. This is very rarely
232 needed in SPL.
233
234config SYS_DEVICE_NULLDEV
235 bool "Enable a null device for stdio"
Simon Glass3ca06092020-08-11 11:23:37 -0600236 default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
Simon Glass7e156382020-08-11 11:23:36 -0600237 help
238 Enable creation of a "nulldev" stdio device. This allows silent
239 operation of the console by setting stdout to "nulldev". Enable
240 this to use a serial console under board control.
241
Simon Glass98af8792016-10-17 20:12:35 -0600242endmenu
243
Simon Glasse9c8d492017-12-04 13:48:24 -0700244menu "Logging"
245
246config LOG
247 bool "Enable logging support"
Michal Simek563273d2018-07-23 15:55:11 +0200248 depends on DM
Simon Glasse9c8d492017-12-04 13:48:24 -0700249 help
250 This enables support for logging of status and debug messages. These
251 can be displayed on the console, recorded in a memory buffer, or
252 discarded if not needed. Logging supports various categories and
253 levels of severity.
254
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200255if LOG
Simon Glasse9c8d492017-12-04 13:48:24 -0700256
257config LOG_MAX_LEVEL
258 int "Maximum log level to record"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200259 default 6
260 range 0 9
Simon Glass4d8d3052018-11-15 18:43:49 -0700261 help
262 This selects the maximum log level that will be recorded. Any value
263 higher than this will be ignored. If possible log statements below
264 this level will be discarded at build time. Levels:
265
Simon Glass6fc7e932019-02-16 20:24:34 -0700266 0 - emergency
267 1 - alert
268 2 - critical
269 3 - error
270 4 - warning
271 5 - note
272 6 - info
Simon Glass4d8d3052018-11-15 18:43:49 -0700273 7 - debug
Simon Glass6fc7e932019-02-16 20:24:34 -0700274 8 - debug content
275 9 - debug hardware I/O
Simon Glass4d8d3052018-11-15 18:43:49 -0700276
Simon Glassf0b05c92019-02-16 20:24:35 -0700277config LOG_DEFAULT_LEVEL
278 int "Default logging level to display"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200279 default LOG_MAX_LEVEL
280 range 0 LOG_MAX_LEVEL
Simon Glassf0b05c92019-02-16 20:24:35 -0700281 help
282 This is the default logging level set when U-Boot starts. It can
283 be adjusted later using the 'log level' command. Note that setting
Andy Shevchenko69264f42019-06-12 15:35:24 +0300284 this to a value above LOG_MAX_LEVEL will be ineffective, since the
Simon Glassf0b05c92019-02-16 20:24:35 -0700285 higher levels are not compiled in to U-Boot.
286
287 0 - emergency
288 1 - alert
289 2 - critical
290 3 - error
291 4 - warning
292 5 - note
293 6 - info
294 7 - debug
295 8 - debug content
296 9 - debug hardware I/O
297
Simon Glassc6d47532017-12-04 13:48:25 -0700298config LOG_CONSOLE
299 bool "Allow log output to the console"
Simon Glassc6d47532017-12-04 13:48:25 -0700300 default y
301 help
302 Enables a log driver which writes log records to the console.
303 Generally the console is the serial port or LCD display. Only the
304 log message is shown - other details like level, category, file and
305 line number are omitted.
306
Heinrich Schuchardt3c21d772020-06-17 21:52:44 +0200307config LOGF_FILE
308 bool "Show source file name in log messages by default"
309 help
310 Show the source file name in log messages by default. This value
311 can be overridden using the 'log format' command.
312
313config LOGF_LINE
314 bool "Show source line number in log messages by default"
315 help
316 Show the source line number in log messages by default. This value
317 can be overridden using the 'log format' command.
318
319config LOGF_FUNC
320 bool "Show function name in log messages by default"
321 help
322 Show the function name in log messages by default. This value can
323 be overridden using the 'log format' command.
324
Simon Glass72fa1ad2021-07-05 16:33:00 -0600325config LOGF_FUNC_PAD
326 int "Number of characters to use for function"
327 default 20
328 help
329 Sets the field width to use when showing the function. Set this to
330 a larger value if you have lots of long function names, and want
331 things to line up.
332
Heinrich Schuchardtbefadde2020-02-26 21:48:16 +0100333config LOG_SYSLOG
334 bool "Log output to syslog server"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200335 depends on NET
Heinrich Schuchardtbefadde2020-02-26 21:48:16 +0100336 help
337 Enables a log driver which broadcasts log records via UDP port 514
338 to syslog servers.
339
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200340config SPL_LOG
341 bool "Enable logging support in SPL"
342 depends on LOG
Simon Glassef11ed82017-12-04 13:48:27 -0700343 help
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200344 This enables support for logging of status and debug messages. These
345 can be displayed on the console, recorded in a memory buffer, or
346 discarded if not needed. Logging supports various categories and
347 levels of severity.
348
349if SPL_LOG
350
351config SPL_LOG_MAX_LEVEL
352 int "Maximum log level to record in SPL"
353 depends on SPL_LOG
354 default 3
355 range 0 9
356 help
357 This selects the maximum log level that will be recorded. Any value
358 higher than this will be ignored. If possible log statements below
359 this level will be discarded at build time. Levels:
360
361 0 - emergency
362 1 - alert
363 2 - critical
364 3 - error
365 4 - warning
366 5 - note
367 6 - info
368 7 - debug
369 8 - debug content
370 9 - debug hardware I/O
371
372config SPL_LOG_CONSOLE
373 bool "Allow log output to the console in SPL"
374 default y
375 help
376 Enables a log driver which writes log records to the console.
377 Generally the console is the serial port or LCD display. Only the
378 log message is shown - other details like level, category, file and
379 line number are omitted.
380
381endif
382
383config TPL_LOG
384 bool "Enable logging support in TPL"
385 depends on LOG
386 help
387 This enables support for logging of status and debug messages. These
388 can be displayed on the console, recorded in a memory buffer, or
389 discarded if not needed. Logging supports various categories and
390 levels of severity.
391
392if TPL_LOG
393
394config TPL_LOG_MAX_LEVEL
395 int "Maximum log level to record in TPL"
396 depends on TPL_LOG
397 default 3
398 range 0 9
399 help
400 This selects the maximum log level that will be recorded. Any value
401 higher than this will be ignored. If possible log statements below
402 this level will be discarded at build time. Levels:
403
404 0 - emergency
405 1 - alert
406 2 - critical
407 3 - error
408 4 - warning
409 5 - note
410 6 - info
411 7 - debug
412 8 - debug content
413 9 - debug hardware I/O
414
415config TPL_LOG_CONSOLE
416 bool "Allow log output to the console in TPL"
417 default y
418 help
419 Enables a log driver which writes log records to the console.
420 Generally the console is the serial port or LCD display. Only the
421 log message is shown - other details like level, category, file and
422 line number are omitted.
423
424endif
Simon Glassef11ed82017-12-04 13:48:27 -0700425
Simon Glass3707c6e2017-12-28 13:14:23 -0700426config LOG_ERROR_RETURN
427 bool "Log all functions which return an error"
Simon Glass3707c6e2017-12-28 13:14:23 -0700428 help
429 When an error is returned in U-Boot it is sometimes difficult to
Chris Packhamf7597732019-01-11 15:30:50 +1300430 figure out the root cause. For example, reading from SPI flash may
Simon Glass3707c6e2017-12-28 13:14:23 -0700431 fail due to a problem in the SPI controller or due to the flash part
432 not returning the expected information. This option changes
433 log_ret() to log any errors it sees. With this option disabled,
434 log_ret() is a nop.
435
436 You can add log_ret() to all functions which return an error code.
437
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200438config LOG_TEST
439 bool "Provide a test for logging"
440 depends on UNIT_TEST
441 default y if SANDBOX
442 help
443 This enables a 'log test' command to test logging. It is normally
444 executed from a pytest and simply outputs logging information
445 in various different ways to test that the logging system works
446 correctly with various settings.
447
448endif
449
Simon Glasse9c8d492017-12-04 13:48:24 -0700450endmenu
451
Simon Glass7df39e52020-09-10 20:21:21 -0600452menu "Init options"
453
Simon Glassa4c4ecf2020-09-10 20:21:26 -0600454config BOARD_TYPES
455 bool "Call get_board_type() to get and display the board type"
456 help
457 If this option is enabled, checkboard() will call get_board_type()
458 to get a string containing the board type and this will be
459 displayed immediately after the model is shown on the console
460 early in boot.
461
Lokesh Vutla19a97472016-10-08 14:41:44 -0400462config DISPLAY_CPUINFO
463 bool "Display information about the CPU during start up"
Alexey Brodkinf31414a2018-10-02 11:43:28 +0300464 default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K
Lokesh Vutla19a97472016-10-08 14:41:44 -0400465 help
466 Display information about the CPU that U-Boot is running on
467 when U-Boot starts up. The function print_cpuinfo() is called
468 to do this.
469
Lokesh Vutla84351792016-10-11 21:33:46 -0400470config DISPLAY_BOARDINFO
Mario Six78eba692018-03-28 14:38:17 +0200471 bool "Display information about the board during early start up"
Alexey Brodkinf31414a2018-10-02 11:43:28 +0300472 default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
Lokesh Vutla84351792016-10-11 21:33:46 -0400473 help
474 Display information about the board that U-Boot is running on
475 when U-Boot starts up. The board function checkboard() is called
476 to do this.
477
Mario Six78eba692018-03-28 14:38:17 +0200478config DISPLAY_BOARDINFO_LATE
479 bool "Display information about the board during late start up"
480 help
481 Display information about the board that U-Boot is running on after
482 the relocation phase. The board function checkboard() is called to do
483 this.
484
Simon Glassa4211922017-01-23 13:31:19 -0700485menu "Start-up hooks"
486
487config ARCH_EARLY_INIT_R
488 bool "Call arch-specific init soon after relocation"
Simon Glassa4211922017-01-23 13:31:19 -0700489 help
490 With this option U-Boot will call arch_early_init_r() soon after
491 relocation. Driver model is running by this point, and the cache
492 is on. Note that board_early_init_r() is called first, if
493 enabled. This can be used to set up architecture-specific devices.
494
Simon Glass45856012017-01-23 13:31:21 -0700495config ARCH_MISC_INIT
496 bool "Call arch-specific init after relocation, when console is ready"
497 help
498 With this option U-Boot will call arch_misc_init() after
499 relocation to allow miscellaneous arch-dependent initialisation
500 to be performed. This function should be defined by the board
Chris Packhamf7597732019-01-11 15:30:50 +1300501 and will be called after the console is set up, after relocation.
Simon Glass45856012017-01-23 13:31:21 -0700502
Simon Glassa5d67542017-01-23 13:31:20 -0700503config BOARD_EARLY_INIT_F
504 bool "Call board-specific init before relocation"
Simon Glassa5d67542017-01-23 13:31:20 -0700505 help
506 Some boards need to perform initialisation as soon as possible
507 after boot. With this option, U-Boot calls board_early_init_f()
508 after driver model is ready in the pre-relocation init sequence.
509 Note that the normal serial console is not yet set up, but the
510 debug UART will be available if enabled.
511
Mario Six02ddc142018-03-28 14:38:15 +0200512config BOARD_EARLY_INIT_R
513 bool "Call board-specific init after relocation"
514 help
515 Some boards need to perform initialisation as directly after
516 relocation. With this option, U-Boot calls board_early_init_r()
517 in the post-relocation init sequence.
518
Simon Glass7e349e92020-09-10 20:21:23 -0600519config BOARD_LATE_INIT
520 bool "Execute Board late init"
521 help
522 Sometimes board require some initialization code that might
523 require once the actual init done, example saving board specific env,
524 boot-modes etc. which eventually done at late.
525
526 So this config enable the late init code with the help of board_late_init
527 function which should defined on respective boards.
528
Mario Six2aeb22d2018-03-28 14:38:16 +0200529config LAST_STAGE_INIT
530 bool "Call board-specific as last setup step"
531 help
532 Some boards need to perform initialisation immediately before control
533 is passed to the command-line interpreter (e.g. for initializations
534 that depend on later phases in the init sequence). With this option,
535 U-Boot calls last_stage_init() before the command-line interpreter is
536 started.
537
Simon Glass48f45452021-03-26 16:17:30 +1300538config MISC_INIT_F
539 bool "Execute pre-relocation misc init"
540 help
541 Enabling this option calls the 'misc_init_f' function in the init
542 sequence just before DRAM is inited.
543
Simon Glass7e349e92020-09-10 20:21:23 -0600544config MISC_INIT_R
545 bool "Execute Misc Init"
546 default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
547 default y if ARCH_OMAP2PLUS && !AM33XX
548 help
549 Enabling this option calls 'misc_init_r' function
550
Ovidiu Panait98bf46f2020-05-06 20:38:44 +0300551config PCI_INIT_R
552 bool "Enumerate PCI buses during init"
553 depends on PCI
554 default y if !DM_PCI
555 help
556 With this option U-Boot will call pci_init() soon after relocation,
557 which will enumerate PCI buses. This is needed, for instance, in the
558 case of DM PCI-based Ethernet devices, which will not be detected
559 without having the enumeration performed earlier.
560
Simon Glassa4211922017-01-23 13:31:19 -0700561endmenu
562
Simon Glass38663132020-09-10 20:21:22 -0600563endmenu # Init options
564
Simon Glassd70f9192017-05-17 09:05:34 -0600565menu "Security support"
566
567config HASH
568 bool # "Support hashing API (SHA1, SHA256, etc.)"
569 help
570 This provides a way to hash data in memory using various supported
571 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
572 and the algorithms it supports are defined in common/hash.c. See
573 also CMD_HASH for command-line access.
574
Igor Opaniukb0aa74a2018-07-17 14:33:25 +0300575config AVB_VERIFY
576 bool "Build Android Verified Boot operations"
Usama Arife61b4152020-08-11 15:46:03 +0100577 depends on LIBAVB
Heinrich Schuchardt9c3808d2021-01-25 12:17:57 +0100578 depends on MMC
Eugeniu Rosca87c814d2018-08-14 02:43:05 +0200579 depends on PARTITION_UUIDS
Igor Opaniukb0aa74a2018-07-17 14:33:25 +0300580 help
581 This option enables compilation of bootloader-dependent operations,
582 used by Android Verified Boot 2.0 library (libavb). Includes:
583 * Helpers to process strings in order to build OS bootargs.
584 * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
585 * Helpers to alloc/init/free avb ops.
586
Usama Arife61b4152020-08-11 15:46:03 +0100587if AVB_VERIFY
588
589config AVB_BUF_ADDR
590 hex "Define AVB buffer address"
591 default FASTBOOT_BUF_ADDR
592 help
593 AVB requires a buffer for memory transactions. This variable defines the
594 buffer address.
595
596config AVB_BUF_SIZE
597 hex "Define AVB buffer SIZE"
598 default FASTBOOT_BUF_SIZE
599 help
600 AVB requires a buffer for memory transactions. This variable defines the
601 buffer size.
602
603endif # AVB_VERIFY
604
Jorge Ramirez-Ortiz166363f2021-02-14 16:27:23 +0100605config SCP03
606 bool "Build SCP03 - Secure Channel Protocol O3 - controls"
607 depends on OPTEE || SANDBOX
608 depends on TEE
609 help
610 This option allows U-Boot to enable and or provision SCP03 on an OPTEE
611 controlled Secured Element.
612
Simon Glassc0126bd2018-11-06 15:21:28 -0700613config SPL_HASH
614 bool # "Support hashing API (SHA1, SHA256, etc.)"
615 help
616 This provides a way to hash data in memory using various supported
617 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
618 and the algorithms it supports are defined in common/hash.c. See
619 also CMD_HASH for command-line access.
620
621config TPL_HASH
622 bool # "Support hashing API (SHA1, SHA256, etc.)"
623 help
624 This provides a way to hash data in memory using various supported
625 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
626 and the algorithms it supports are defined in common/hash.c. See
627 also CMD_HASH for command-line access.
628
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200629config STACKPROTECTOR
630 bool "Stack Protector buffer overflow detection"
631 default n
632 help
633 Enable stack smash detection through compiler's stack-protector
634 canary logic
635
636config SPL_STACKPROTECTOR
637 bool "Stack Protector buffer overflow detection for SPL"
638 depends on STACKPROTECTOR && SPL
639 default n
640
641config TPL_STACKPROTECTOR
642 bool "Stack Protector buffer overflow detection for TPL"
643 depends on STACKPROTECTOR && TPL
644 default n
645
Simon Glassd70f9192017-05-17 09:05:34 -0600646endmenu
647
Marek Vasutb254c522018-02-10 16:22:06 +0100648menu "Update support"
649
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900650config UPDATE_COMMON
651 bool
652 default n
653 select DFU_WRITE_ALT
654
Marek Vasutb254c522018-02-10 16:22:06 +0100655config UPDATE_TFTP
656 bool "Auto-update using fitImage via TFTP"
657 depends on FIT
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900658 select UPDATE_COMMON
Marek Vasutb254c522018-02-10 16:22:06 +0100659 help
660 This option allows performing update of NOR with data in fitImage
661 sent via TFTP boot.
662
663config UPDATE_TFTP_CNT_MAX
664 int "The number of connection retries during auto-update"
665 default 0
666 depends on UPDATE_TFTP
667
668config UPDATE_TFTP_MSEC_MAX
669 int "Delay in mSec to wait for the TFTP server during auto-update"
670 default 100
671 depends on UPDATE_TFTP
672
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900673config UPDATE_FIT
674 bool "Firmware update using fitImage"
675 depends on FIT
676 depends on DFU
677 select UPDATE_COMMON
678 help
679 This option allows performing update of DFU-capable storage with
680 data in fitImage.
681
Ruslan Trofymenkod65e8da2019-07-05 15:37:32 +0300682config ANDROID_AB
683 bool "Android A/B updates"
684 default n
685 help
686 If enabled, adds support for the new Android A/B update model. This
687 allows the bootloader to select which slot to boot from based on the
688 information provided by userspace via the Android boot_ctrl HAL. This
689 allows a bootloader to try a new version of the system but roll back
690 to previous version if the new one didn't boot all the way.
691
Marek Vasutb254c522018-02-10 16:22:06 +0100692endmenu
693
Simon Glass9f407d42018-11-15 18:43:50 -0700694menu "Blob list"
695
696config BLOBLIST
697 bool "Support for a bloblist"
698 help
699 This enables support for a bloblist in U-Boot, which can be passed
700 from TPL to SPL to U-Boot proper (and potentially to Linux). The
701 blob list supports multiple binary blobs of data, each with a tag,
702 so that different U-Boot components can store data which can survive
703 through to the next stage of the boot.
704
705config SPL_BLOBLIST
706 bool "Support for a bloblist in SPL"
707 depends on BLOBLIST
708 default y if SPL
709 help
710 This enables a bloblist in SPL. If this is the first part of U-Boot
711 to run, then the bloblist is set up in SPL and passed to U-Boot
712 proper. If TPL also has a bloblist, then SPL uses the one from there.
713
714config TPL_BLOBLIST
715 bool "Support for a bloblist in TPL"
716 depends on BLOBLIST
717 default y if TPL
718 help
719 This enables a bloblist in TPL. The bloblist is set up in TPL and
720 passed to SPL and U-Boot proper.
721
722config BLOBLIST_SIZE
723 hex "Size of bloblist"
724 depends on BLOBLIST
725 default 0x400
726 help
727 Sets the size of the bloblist in bytes. This must include all
728 overhead (alignment, bloblist header, record header). The bloblist
729 is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
730 proper), and this sane bloblist is used for subsequent stages.
731
732config BLOBLIST_ADDR
733 hex "Address of bloblist"
734 depends on BLOBLIST
Simon Glassecc1ed92021-07-05 16:32:48 -0600735 default 0xc000 if SANDBOX
Simon Glass9f407d42018-11-15 18:43:50 -0700736 help
737 Sets the address of the bloblist, set up by the first part of U-Boot
738 which runs. Subsequent U-Boot stages typically use the same address.
739
Simon Glass9fe06462021-01-13 20:29:43 -0700740config BLOBLIST_SIZE_RELOC
741 hex "Size of bloblist after relocation"
742 depends on BLOBLIST
743 default BLOBLIST_SIZE
744 help
745 Sets the size of the bloblist in bytes after relocation. Since U-Boot
746 has a lot more memory available then, it is possible to use a larger
747 size than the one set up by SPL. This bloblist is set up during the
748 relocation process.
749
Simon Glass9f407d42018-11-15 18:43:50 -0700750endmenu
751
Simon Glassc2ae7d82016-09-12 23:18:22 -0600752source "common/spl/Kconfig"
AKASHI Takahirob983cc22020-02-21 15:12:55 +0900753
754config IMAGE_SIGN_INFO
755 bool
756 select SHA1
757 select SHA256
758 help
759 Enable image_sign_info helper functions.
Heinrich Schuchardt64411642020-04-15 18:46:21 +0200760
761if IMAGE_SIGN_INFO
762
763config SPL_IMAGE_SIGN_INFO
764 bool
765 select SHA1
766 select SHA256
767 help
768 Enable image_sign_info helper functions in SPL.
769
770endif