blob: 7bed756a71f147f3ea48b2b563925878dfb0506d [file] [log] [blame]
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +02001/*
2 * Qualcomm UART driver
3 *
4 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
5 *
6 * UART will work in Data Mover mode.
7 * Based on Linux driver.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#include <common.h>
13#include <clk.h>
14#include <dm.h>
15#include <errno.h>
16#include <serial.h>
17#include <watchdog.h>
18#include <asm/io.h>
19#include <linux/compiler.h>
20
21/* Serial registers - this driver works in uartdm mode*/
22
23#define UARTDM_DMRX 0x34 /* Max RX transfer length */
24#define UARTDM_NCF_TX 0x40 /* Number of chars to TX */
25
26#define UARTDM_RXFS 0x50 /* RX channel status register */
27#define UARTDM_RXFS_BUF_SHIFT 0x7 /* Number of bytes in the packing buffer */
28#define UARTDM_RXFS_BUF_MASK 0x7
29
30#define UARTDM_SR 0xA4 /* Status register */
31#define UARTDM_SR_RX_READY (1 << 0) /* Word is the receiver FIFO */
32#define UARTDM_SR_TX_EMPTY (1 << 3) /* Transmitter underrun */
33#define UARTDM_SR_UART_OVERRUN (1 << 4) /* Receive overrun */
34
35#define UARTDM_CR 0xA8 /* Command register */
36#define UARTDM_CR_CMD_RESET_ERR (3 << 4) /* Clear overrun error */
37#define UARTDM_CR_CMD_RESET_STALE_INT (8 << 4) /* Clears stale irq */
38#define UARTDM_CR_CMD_RESET_TX_READY (3 << 8) /* Clears TX Ready irq*/
39#define UARTDM_CR_CMD_FORCE_STALE (4 << 8) /* Causes stale event */
40#define UARTDM_CR_CMD_STALE_EVENT_DISABLE (6 << 8) /* Disable stale event */
41
42#define UARTDM_IMR 0xB0 /* Interrupt mask register */
43#define UARTDM_ISR 0xB4 /* Interrupt status register */
44#define UARTDM_ISR_TX_READY 0x80 /* TX FIFO empty */
45
46#define UARTDM_TF 0x100 /* UART Transmit FIFO register */
47#define UARTDM_RF 0x140 /* UART Receive FIFO register */
48
49
50DECLARE_GLOBAL_DATA_PTR;
51
52struct msm_serial_data {
53 phys_addr_t base;
54 unsigned chars_cnt; /* number of buffered chars */
55 uint32_t chars_buf; /* buffered chars */
56};
57
58static int msm_serial_fetch(struct udevice *dev)
59{
60 struct msm_serial_data *priv = dev_get_priv(dev);
61 unsigned sr;
62
63 if (priv->chars_cnt)
64 return priv->chars_cnt;
65
66 /* Clear error in case of buffer overrun */
67 if (readl(priv->base + UARTDM_SR) & UARTDM_SR_UART_OVERRUN)
68 writel(UARTDM_CR_CMD_RESET_ERR, priv->base + UARTDM_CR);
69
70 /* We need to fetch new character */
71 sr = readl(priv->base + UARTDM_SR);
72
73 if (sr & UARTDM_SR_RX_READY) {
74 /* There are at least 4 bytes in fifo */
75 priv->chars_buf = readl(priv->base + UARTDM_RF);
76 priv->chars_cnt = 4;
77 } else {
78 /* Check if there is anything in fifo */
79 priv->chars_cnt = readl(priv->base + UARTDM_RXFS);
80 /* Extract number of characters in UART packing buffer*/
81 priv->chars_cnt = (priv->chars_cnt >>
82 UARTDM_RXFS_BUF_SHIFT) &
83 UARTDM_RXFS_BUF_MASK;
84 if (!priv->chars_cnt)
85 return 0;
86
87 /* There is at least one charcter, move it to fifo */
88 writel(UARTDM_CR_CMD_FORCE_STALE,
89 priv->base + UARTDM_CR);
90
91 priv->chars_buf = readl(priv->base + UARTDM_RF);
92 writel(UARTDM_CR_CMD_RESET_STALE_INT,
93 priv->base + UARTDM_CR);
94 writel(0x7, priv->base + UARTDM_DMRX);
95 }
96
97 return priv->chars_cnt;
98}
99
100static int msm_serial_getc(struct udevice *dev)
101{
102 struct msm_serial_data *priv = dev_get_priv(dev);
103 char c;
104
105 if (!msm_serial_fetch(dev))
106 return -EAGAIN;
107
108 c = priv->chars_buf & 0xFF;
109 priv->chars_buf >>= 8;
110 priv->chars_cnt--;
111
112 return c;
113}
114
115static int msm_serial_putc(struct udevice *dev, const char ch)
116{
117 struct msm_serial_data *priv = dev_get_priv(dev);
118
119 if (!(readl(priv->base + UARTDM_SR) & UARTDM_SR_TX_EMPTY) &&
120 !(readl(priv->base + UARTDM_ISR) & UARTDM_ISR_TX_READY))
121 return -EAGAIN;
122
123 writel(UARTDM_CR_CMD_RESET_TX_READY, priv->base + UARTDM_CR);
124
125 writel(1, priv->base + UARTDM_NCF_TX);
126 writel(ch, priv->base + UARTDM_TF);
127
128 return 0;
129}
130
131static int msm_serial_pending(struct udevice *dev, bool input)
132{
133 if (input) {
134 if (msm_serial_fetch(dev))
135 return 1;
136 }
137
138 return 0;
139}
140
141static const struct dm_serial_ops msm_serial_ops = {
142 .putc = msm_serial_putc,
143 .pending = msm_serial_pending,
144 .getc = msm_serial_getc,
145};
146
147static int msm_uart_clk_init(struct udevice *dev)
148{
Simon Glasse160f7d2017-01-17 16:52:55 -0700149 uint clk_rate = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200150 "clock-frequency", 115200);
151 uint clkd[2]; /* clk_id and clk_no */
152 int clk_offset;
Stephen Warren135aa952016-06-17 09:44:00 -0600153 struct udevice *clk_dev;
154 struct clk clk;
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200155 int ret;
156
Simon Glasse160f7d2017-01-17 16:52:55 -0700157 ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), "clock",
158 clkd, 2);
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200159 if (ret)
160 return ret;
161
162 clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]);
163 if (clk_offset < 0)
164 return clk_offset;
165
Stephen Warren135aa952016-06-17 09:44:00 -0600166 ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200167 if (ret)
168 return ret;
169
Stephen Warren135aa952016-06-17 09:44:00 -0600170 clk.id = clkd[1];
171 ret = clk_request(clk_dev, &clk);
172 if (ret < 0)
173 return ret;
174
175 ret = clk_set_rate(&clk, clk_rate);
176 clk_free(&clk);
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200177 if (ret < 0)
178 return ret;
179
180 return 0;
181}
182
183static int msm_serial_probe(struct udevice *dev)
184{
185 struct msm_serial_data *priv = dev_get_priv(dev);
186
187 msm_uart_clk_init(dev); /* Ignore return value and hope clock was
188 properly initialized by earlier loaders */
189
190 if (readl(priv->base + UARTDM_SR) & UARTDM_SR_UART_OVERRUN)
191 writel(UARTDM_CR_CMD_RESET_ERR, priv->base + UARTDM_CR);
192
193 writel(0, priv->base + UARTDM_IMR);
194 writel(UARTDM_CR_CMD_STALE_EVENT_DISABLE, priv->base + UARTDM_CR);
195 msm_serial_fetch(dev);
196
197 return 0;
198}
199
200static int msm_serial_ofdata_to_platdata(struct udevice *dev)
201{
202 struct msm_serial_data *priv = dev_get_priv(dev);
203
Simon Glassa821c4a2017-05-17 17:18:05 -0600204 priv->base = devfdt_get_addr(dev);
Mateusz Kulikowski142a20c2016-03-31 23:12:14 +0200205 if (priv->base == FDT_ADDR_T_NONE)
206 return -EINVAL;
207
208 return 0;
209}
210
211static const struct udevice_id msm_serial_ids[] = {
212 { .compatible = "qcom,msm-uartdm-v1.4" },
213 { }
214};
215
216U_BOOT_DRIVER(serial_msm) = {
217 .name = "serial_msm",
218 .id = UCLASS_SERIAL,
219 .of_match = msm_serial_ids,
220 .ofdata_to_platdata = msm_serial_ofdata_to_platdata,
221 .priv_auto_alloc_size = sizeof(struct msm_serial_data),
222 .probe = msm_serial_probe,
223 .ops = &msm_serial_ops,
224};